/*
* Copyright 1995-2018 The OpenSSL Project Authors. All Rights Reserved.
*
* Licensed under the OpenSSL license (the "License"). You may not use
* this file except in compliance with the License. You can obtain a copy
* in the file LICENSE in the source distribution or at
* https://www.openssl.org/source/license.html
*/
/*****************************************************************************
* *
* These structures should be considered PRIVATE to the record layer. No *
* non-record layer code should be using these structures in any way. *
* *
*****************************************************************************/
typedef struct ssl3_buffer_st {
/* at least SSL3_RT_MAX_PACKET_SIZE bytes, see ssl3_setup_buffers() */
unsigned char *buf;
/* default buffer size (or 0 if no default set) */
size_t default_len;
/* buffer size */
size_t len;
/* where to 'copy from' */
size_t offset;
/* how many bytes left */
size_t left;
} SSL3_BUFFER;
#define SEQ_NUM_SIZE 8
typedef struct ssl3_record_st {
/* Record layer version */
/* r */
int rec_version;
/* type of record */
/* r */
int type;
/* How many bytes available */
/* rw */
size_t length;
/*
* How many bytes were available before padding was removed? This is used
* to implement the MAC check in constant time for CBC records.
*/
/* rw */
size_t orig_len;
/* read/write offset into 'buf' */
/* r */
size_t off;
/* pointer to the record data */
/* rw */
unsigned char *data;
/* where the decode bytes are */
/* rw */
unsigned char *input;
/* only used with decompression - malloc()ed */
/* r */
unsigned char *comp;
/* Whether the data from this record has already been read or not */
/* r */
unsigned int read;
/* epoch number, needed by DTLS1 */
/* r */
unsigned long epoch;
/* sequence number, needed by DTLS1 */
/* r */
unsigned char seq_num[SEQ_NUM_SIZE];
} SSL3_RECORD;
typedef struct dtls1_bitmap_st {
/* Track 32 packets on 32-bit systems and 64 - on 64-bit systems */
unsigned long map;
/* Max record number seen so far, 64-bit value in big-endian encoding */
unsigned char max_seq_num[SEQ_NUM_SIZE];
} DTLS1_BITMAP;
typedef struct record_pqueue_st {
unsigned short epoch;
struct pqueue_st *q;
} record_pqueue;
typedef struct dtls1_record_data_st {
unsigned char *packet;
size_t packet_length;
SSL3_BUFFER rbuf;
SSL3_RECORD rrec;
#ifndef OPENSSL_NO_SCTP
struct bio_dgram_sctp_rcvinfo recordinfo;
#endif
} DTLS1_RECORD_DATA;
typedef struct dtls_record_layer_st {
/*
* The current data and handshake epoch. This is initially
* undefined, and starts at zero once the initial handshake is
* completed
*/
unsigned short r_epoch;
unsigned short w_epoch;
/* records being received in the current epoch */
DTLS1_BITMAP bitmap;
/* renegotiation starts a new set of sequence numbers */
DTLS1_BITMAP next_bitmap;
/* Received handshake records (processed and unprocessed) */
record_pqueue unprocessed_rcds;
record_pqueue processed_rcds;
/*
* Buffered application records. Only for records between CCS and
* Finished to prevent either protocol violation or unnecessary message
* loss.
*/
record_pqueue buffered_app_data;
/* save last and current sequence numbers for retransmissions */
unsigned char last_write_sequence[8];
unsigned char curr_write_sequence[8];
} DTLS_RECORD_LAYER;
/*****************************************************************************
* *
* This structure should be considered "opaque" to anything outside of the *
* record layer. No non-record layer code should be accessing the members of *
* this structure. *
* *
*****************************************************************************/
typedef struct record_layer_st {
/* The parent SSL structure */
SSL *s;
/*
* Read as many input bytes as possible (for
* non-blocking reads)
*/
int read_ahead;
/* where we are when reading */
int rstate;
/* How many pipelines can be used to read data */
size_t numrpipes;
/* How many pipelines can be used to write data */
size_t numwpipes;
/* read IO goes into here */
SSL3_BUFFER rbuf;
/* write IO goes into here */
SSL3_BUFFER wbuf[SSL_MAX_PIPELINES];
/* each decoded record goes in here */
SSL3_RECORD rrec[SSL_MAX_PIPELINES];
/* used internally to point at a raw packet */
unsigned char *packet;
size_t packet_length;
/* number of bytes sent so far */
size_t wnum;
unsigned char handshake_fragment[4];
size_t handshake_fragment_len;
/* The number of consecutive empty records we have received */
size_t empty_record_count;
/* partial write - check the numbers match */
/* number bytes written */
size_t wpend_tot;
int wpend_type;
/* number of bytes submitted */
size_t wpend_ret;
const unsigned char *wpend_buf;
unsigned char read_sequence[SEQ_NUM_SIZE];
unsigned char write_sequence[SEQ_NUM_SIZE];
/* Set to true if this is the first record in a connection */
unsigned int is_first_record;
/* Count of the number of consecutive warning alerts received */
unsigned int alert_count;
DTLS_RECORD_LAYER *d;
} RECORD_LAYER;
/*****************************************************************************
* *
* The following macros/functions represent the libssl internal API to the *
* record layer. Any libssl code may call these functions/macros *
* *
*****************************************************************************/
#define MIN_SSL2_RECORD_LEN 9
#define RECORD_LAYER_set_read_ahead(rl, ra) ((rl)->read_ahead = (ra))
#define RECORD_LAYER_get_read_ahead(rl) ((rl)->read_ahead)
#define RECORD_LAYER_get_packet(rl) ((rl)->packet)
#define RECORD_LAYER_get_packet_length(rl) ((rl)->packet_length)
#define RECORD_LAYER_add_packet_length(rl, inc) ((rl)->packet_length += (inc))
#define DTLS_RECORD_LAYER_get_w_epoch(rl) ((rl)->d->w_epoch)
#define DTLS_RECORD_LAYER_get_processed_rcds(rl) \
((rl)->d->processed_rcds)
#define DTLS_RECORD_LAYER_get_unprocessed_rcds(rl) \
((rl)->d->unprocessed_rcds)
#define RECORD_LAYER_get_rbuf(rl) (&(rl)->rbuf)
#define RECORD_LAYER_get_wbuf(rl) ((rl)->wbuf)
void RECORD_LAYER_init(RECORD_LAYER *rl, SSL *s);
void RECORD_LAYER_clear(RECORD_LAYER *rl);
void RECORD_LAYER_release(RECORD_LAYER *rl);
int RECORD_LAYER_read_pending(const RECORD_LAYER *rl);
int RECORD_LAYER_processed_read_pending(const RECORD_LAYER *rl);
int RECORD_LAYER_write_pending(const RECORD_LAYER *rl);
void RECORD_LAYER_reset_read_sequence(RECORD_LAYER *rl);
void RECORD_LAYER_reset_write_sequence(RECORD_LAYER *rl);
int RECORD_LAYER_is_sslv2_record(RECORD_LAYER *rl);
size_t RECORD_LAYER_get_rrec_length(RECORD_LAYER *rl);
__owur size_t ssl3_pending(const SSL *s);
__owur int ssl3_write_bytes(SSL *s, int type, const void *buf, size_t len,
size_t *written);
int do_ssl3_write(SSL *s, int type, const unsigned char *buf,
size_t *pipelens, size_t numpipes,
int create_empty_fragment, size_t *written);
__owur int ssl3_read_bytes(SSL *s, int type, int *recvd_type,
unsigned char *buf, size_t len, int peek,
size_t *readbytes);
__owur int ssl3_setup_buffers(SSL *s);
__owur int ssl3_enc(SSL *s, SSL3_RECORD *inrecs, size_t n_recs, int send);
__owur int n_ssl3_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send);
__owur int ssl3_write_pending(SSL *s, int type, const unsigned char *buf, size_t len,
size_t *written);
__owur int tls1_enc(SSL *s, SSL3_RECORD *recs, size_t n_recs, int send);
__owur int tls1_mac(SSL *ssl, SSL3_RECORD *rec, unsigned char *md, int send);
__owur int tls13_enc(SSL *s, SSL3_RECORD *recs, size_t n_recs, int send);
int DTLS_RECORD_LAYER_new(RECORD_LAYER *rl);
void DTLS_RECORD_LAYER_free(RECORD_LAYER *rl);
void DTLS_RECORD_LAYER_clear(RECORD_LAYER *rl);
void DTLS_RECORD_LAYER_set_saved_w_epoch(RECORD_LAYER *rl, unsigned short e);
void DTLS_RECORD_LAYER_clear(RECORD_LAYER *rl);
void DTLS_RECORD_LAYER_set_write_sequence(RECORD_LAYER *rl, unsigned char *seq);
__owur int dtls1_read_bytes(SSL *s, int type, int *recvd_type,
unsigned char *buf, size_t len, int peek,
size_t *readbytes);
__owur int dtls1_write_bytes(SSL *s, int type, const void *buf, size_t len,
size_t *written);
int do_dtls1_write(SSL *s, int type, const unsigned char *buf,
size_t len, int create_empty_fragment, size_t *written);
void dtls1_reset_seq_numbers(SSL *s, int rw);
int dtls_buffer_listen_record(SSL *s, size_t len, unsigned char *seq,
size_t off);