/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2015-2016 Hiroki Mori.
* Copyright (c) 2011-2012 Stefan Bethke.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _DEV_ETHERSWITCH_RTL8366RBVAR_H_
#define _DEV_ETHERSWITCH_RTL8366RBVAR_H_
#define RTL8366RB 0
#define RTL8366SR 1
#define RTL8366_IIC_ADDR 0xa8
#define RTL_IICBUS_TIMEOUT 100 /* us */
#define RTL_IICBUS_READ 1
#define RTL_IICBUS_WRITE 0
/* number of times to try and select the chip on the I2C bus */
#define RTL_IICBUS_RETRIES 3
#define RTL_IICBUS_RETRY_SLEEP (hz/1000)
/* Register definitions */
/* Switch Global Configuration */
#define RTL8366_SGCR 0x0000
#define RTL8366_SGCR_EN_BC_STORM_CTRL 0x0001
#define RTL8366_SGCR_MAX_LENGTH_MASK 0x0030
#define RTL8366_SGCR_MAX_LENGTH_1522 0x0000
#define RTL8366_SGCR_MAX_LENGTH_1536 0x0010
#define RTL8366_SGCR_MAX_LENGTH_1552 0x0020
#define RTL8366_SGCR_MAX_LENGTH_9216 0x0030
#define RTL8366_SGCR_EN_VLAN 0x2000
#define RTL8366_SGCR_EN_VLAN_4KTB 0x4000
#define RTL8366_SGCR_EN_QOS 0x8000
/* Port Enable Control: DISABLE_PORT[5:0] */
#define RTL8366_PECR 0x0001
/* Switch Security Control 0: DIS_LEARN[5:0] */
#define RTL8366_SSCR0 0x0002
/* Switch Security Control 1: DIS_AGE[5:0] */
#define RTL8366_SSCR1 0x0003
/* Switch Security Control 2 */
#define RTL8366_SSCR2 0x0004
#define RTL8366_SSCR2_DROP_UNKNOWN_DA 0x0001
/* Port Link Status: two ports per register */
#define RTL8366_PLSR_BASE (sc->chip_type == 0 ? 0x0014 : 0x0060)
#define RTL8366_PLSR_SPEED_MASK 0x03
#define RTL8366_PLSR_SPEED_10 0x00
#define RTL8366_PLSR_SPEED_100 0x01
#define RTL8366_PLSR_SPEED_1000 0x02
#define RTL8366_PLSR_FULLDUPLEX 0x04
#define RTL8366_PLSR_LINK 0x10
#define RTL8366_PLSR_TXPAUSE 0x20
#define RTL8366_PLSR_RXPAUSE 0x40
#define RTL8366_PLSR_NO_AUTO 0x80
/* VLAN Member Configuration, 3 or 2 registers per VLAN */
#define RTL8366_VMCR_BASE (sc->chip_type == 0 ? 0x0020 : 0x0016)
#define RTL8366_VMCR_MULT (sc->chip_type == 0 ? 3 : 2)
#define RTL8366_VMCR_DOT1Q_REG 0
#define RTL8366_VMCR_DOT1Q_VID_SHIFT 0
#define RTL8366_VMCR_DOT1Q_VID_MASK 0x0fff
#define RTL8366_VMCR_DOT1Q_PCP_SHIFT 12
#define RTL8366_VMCR_DOT1Q_PCP_MASK 0x7000
#define RTL8366_VMCR_MU_REG 1
#define RTL8366_VMCR_MU_MEMBER_SHIFT 0
#define RTL8366_VMCR_MU_MEMBER_MASK (sc->chip_type == 0 ? 0x00ff : 0x003f)
#define RTL8366_VMCR_MU_UNTAG_SHIFT (sc->chip_type == 0 ? 8 : 6)
#define RTL8366_VMCR_MU_UNTAG_MASK (sc->chip_type == 0 ? 0xff00 : 0x0fc0)
#define RTL8366_VMCR_FID_REG (sc->chip_type == 0 ? 2 : 1)
#define RTL8366_VMCR_FID_FID_SHIFT (sc->chip_type == 0 ? 0 : 12)
#define RTL8366_VMCR_FID_FID_MASK (sc->chip_type == 0 ? 0x0007 : 0x7000)
#define RTL8366_VMCR(_reg, _vlan) \
(RTL8366_VMCR_BASE + _reg + _vlan * RTL8366_VMCR_MULT)
/* VLAN Identifier */
#define RTL8366_VMCR_VID(_r) \
(_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_VID_MASK)
/* Priority Code Point */
#define RTL8366_VMCR_PCP(_r) \
((_r[RTL8366_VMCR_DOT1Q_REG] & RTL8366_VMCR_DOT1Q_PCP_MASK) \
>> RTL8366_VMCR_DOT1Q_PCP_SHIFT)
/* Member ports */
#define RTL8366_VMCR_MEMBER(_r) \
(_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_MEMBER_MASK)
/* Untagged ports */
#define RTL8366_VMCR_UNTAG(_r) \
((_r[RTL8366_VMCR_MU_REG] & RTL8366_VMCR_MU_UNTAG_MASK) \
>> RTL8366_VMCR_MU_UNTAG_SHIFT)
/* Forwarding ID */
#define RTL8366_VMCR_FID(_r) \
(sc->chip_type == 0 ? (_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) : \
((_r[RTL8366_VMCR_FID_REG] & RTL8366_VMCR_FID_FID_MASK) \
>> RTL8366_VMCR_FID_FID_SHIFT))
/*
* Port VLAN Control, 4 ports per register
* Determines the VID for untagged ingress frames through
* index into VMC.
*/
#define RTL8366_PVCR_BASE (sc->chip_type == 0 ? 0x0063 : 0x0058)
#define RTL8366_PVCR_PORT_SHIFT 4
#define RTL8366_PVCR_PORT_PERREG (16 / RTL8366_PVCR_PORT_SHIFT)
#define RTL8366_PVCR_PORT_MASK 0x000f
#define RTL8366_PVCR_REG(_port) \
(RTL8366_PVCR_BASE + _port / (RTL8366_PVCR_PORT_PERREG))
#define RTL8366_PVCR_VAL(_port, _pvlan) \
((_pvlan & RTL8366_PVCR_PORT_MASK) << \
((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT))
#define RTL8366_PVCR_GET(_port, _val) \
(((_val) >> ((_port % RTL8366_PVCR_PORT_PERREG) * RTL8366_PVCR_PORT_SHIFT)) & RTL8366_PVCR_PORT_MASK)
/* Reset Control */
#define RTL8366_RCR 0x0100
#define RTL8366_RCR_HARD_RESET 0x0001
#define RTL8366_RCR_SOFT_RESET 0x0002
/* Chip Version Control: CHIP_VER[3:0] */
#define RTL8366_CVCR (sc->chip_type == 0 ? 0x050A : 0x0104)
/* Chip Identifier */
#define RTL8366RB_CIR 0x0509
#define RTL8366RB_CIR_ID8366RB 0x5937
#define RTL8366SR_CIR 0x0105
#define RTL8366SR_CIR_ID8366SR 0x8366
/* VLAN Ingress Control 2: [5:0] */
#define RTL8366_VIC2R 0x037f
/* MIB registers */
#define RTL8366_MCNT_BASE 0x1000
#define RTL8366_MCTLR (sc->chip_type == 0 ? 0x13f0 : 0x11F0)
#define RTL8366_MCTLR_BUSY 0x0001
#define RTL8366_MCTLR_RESET 0x0002
#define RTL8366_MCTLR_RESET_PORT_MASK 0x00fc
#define RTL8366_MCTLR_RESET_ALL 0x0800
#define RTL8366_MCNT(_port, _r) \
(RTL8366_MCNT_BASE + 0x50 * (_port) + (_r))
#define RTL8366_MCTLR_RESET_PORT(_p) \
(1 << ((_p) + 2))
/* PHY Access Control */
#define RTL8366_PACR (sc->chip_type == 0 ? 0x8000 : 0x8028)
#define RTL8366_PACR_WRITE 0x0000
#define RTL8366_PACR_READ 0x0001
/* PHY Access Data */
#define RTL8366_PADR (sc->chip_type == 0 ? 0x8002 : 0x8029)
#define RTL8366_PHYREG(phy, page, reg) \
(0x8000 | (1 << (((phy) & 0x1f) + 9)) | (((page) & (sc->chip_type == 0 ? 0xf : 0x7)) << 5) | ((reg) & 0x1f))
/* general characteristics of the chip */
#define RTL8366_NUM_PHYS 5
#define RTL8366_NUM_VLANS 16
#define RTL8366_NUM_PHY_REG 32
#endif