# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
@SET_MAKE@
# $Id$
# $Id$
# $Id$
VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
$(top_srcdir)/Makefile.am.common \
$(top_srcdir)/cf/Makefile.am.common ChangeLog
subdir = appl/ftp
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/cf/aix.m4 \
$(top_srcdir)/cf/auth-modules.m4 \
$(top_srcdir)/cf/broken-getaddrinfo.m4 \
$(top_srcdir)/cf/broken-glob.m4 \
$(top_srcdir)/cf/broken-realloc.m4 \
$(top_srcdir)/cf/broken-snprintf.m4 $(top_srcdir)/cf/broken.m4 \
$(top_srcdir)/cf/broken2.m4 $(top_srcdir)/cf/c-attribute.m4 \
$(top_srcdir)/cf/capabilities.m4 \
$(top_srcdir)/cf/check-compile-et.m4 \
$(top_srcdir)/cf/check-getpwnam_r-posix.m4 \
$(top_srcdir)/cf/check-man.m4 \
$(top_srcdir)/cf/check-netinet-ip-and-tcp.m4 \
$(top_srcdir)/cf/check-type-extra.m4 \
$(top_srcdir)/cf/check-var.m4 $(top_srcdir)/cf/check-x.m4 \
$(top_srcdir)/cf/check-xau.m4 $(top_srcdir)/cf/crypto.m4 \
$(top_srcdir)/cf/db.m4 $(top_srcdir)/cf/destdirs.m4 \
$(top_srcdir)/cf/dispatch.m4 $(top_srcdir)/cf/dlopen.m4 \
$(top_srcdir)/cf/find-func-no-libs.m4 \
$(top_srcdir)/cf/find-func-no-libs2.m4 \
$(top_srcdir)/cf/find-func.m4 \
$(top_srcdir)/cf/find-if-not-broken.m4 \
$(top_srcdir)/cf/framework-security.m4 \
$(top_srcdir)/cf/have-struct-field.m4 \
$(top_srcdir)/cf/have-type.m4 $(top_srcdir)/cf/irix.m4 \
$(top_srcdir)/cf/krb-bigendian.m4 \
$(top_srcdir)/cf/krb-func-getlogin.m4 \
$(top_srcdir)/cf/krb-ipv6.m4 $(top_srcdir)/cf/krb-prog-ln-s.m4 \
$(top_srcdir)/cf/krb-readline.m4 \
$(top_srcdir)/cf/krb-struct-spwd.m4 \
$(top_srcdir)/cf/krb-struct-winsize.m4 \
$(top_srcdir)/cf/largefile.m4 $(top_srcdir)/cf/libtool.m4 \
$(top_srcdir)/cf/ltoptions.m4 $(top_srcdir)/cf/ltsugar.m4 \
$(top_srcdir)/cf/ltversion.m4 $(top_srcdir)/cf/lt~obsolete.m4 \
$(top_srcdir)/cf/mips-abi.m4 $(top_srcdir)/cf/misc.m4 \
$(top_srcdir)/cf/need-proto.m4 $(top_srcdir)/cf/osfc2.m4 \
$(top_srcdir)/cf/otp.m4 $(top_srcdir)/cf/pkg.m4 \
$(top_srcdir)/cf/proto-compat.m4 $(top_srcdir)/cf/pthreads.m4 \
$(top_srcdir)/cf/resolv.m4 $(top_srcdir)/cf/retsigtype.m4 \
$(top_srcdir)/cf/roken-frag.m4 \
$(top_srcdir)/cf/socket-wrapper.m4 $(top_srcdir)/cf/sunos.m4 \
$(top_srcdir)/cf/telnet.m4 $(top_srcdir)/cf/test-package.m4 \
$(top_srcdir)/cf/version-script.m4 $(top_srcdir)/cf/wflags.m4 \
$(top_srcdir)/cf/win32.m4 $(top_srcdir)/cf/with-all.m4 \
$(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = $(top_builddir)/include/config.h
CONFIG_CLEAN_FILES =
CONFIG_CLEAN_VPATH_FILES =
SOURCES =
DIST_SOURCES =
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
distdir
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
am__relativize = \
dir0=`pwd`; \
sed_first='s,^\([^/]*\)/.*$$,\1,'; \
sed_rest='s,^[^/]*/*,,'; \
sed_last='s,^.*/\([^/]*\)$$,\1,'; \
sed_butlast='s,/*[^/]*$$,,'; \
while test -n "$$dir1"; do \
first=`echo "$$dir1" | sed -e "$$sed_first"`; \
if test "$$first" != "."; then \
if test "$$first" = ".."; then \
dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
else \
first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
if test "$$first2" = "$$first"; then \
dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
else \
dir2="../$$dir2"; \
fi; \
dir0="$$dir0"/"$$first"; \
fi; \
fi; \
dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
done; \
reldir="$$dir2"
ACLOCAL = @ACLOCAL@
AIX_EXTRA_KAFS = @AIX_EXTRA_KAFS@
AMTAR = @AMTAR@
AR = @AR@
ASN1_COMPILE = @ASN1_COMPILE@
ASN1_COMPILE_DEP = @ASN1_COMPILE_DEP@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CANONICAL_HOST = @CANONICAL_HOST@
CAPNG_CFLAGS = @CAPNG_CFLAGS@
CAPNG_LIBS = @CAPNG_LIBS@
CATMAN = @CATMAN@
CATMANEXT = @CATMANEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
COMPILE_ET = @COMPILE_ET@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DBHEADER = @DBHEADER@
DBLIB = @DBLIB@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DIR_com_err = @DIR_com_err@
DIR_hcrypto = @DIR_hcrypto@
DIR_hdbdir = @DIR_hdbdir@
DIR_roken = @DIR_roken@
DLLTOOL = @DLLTOOL@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GREP = @GREP@
GROFF = @GROFF@
INCLUDES_roken = @INCLUDES_roken@
INCLUDE_hcrypto = @INCLUDE_hcrypto@
INCLUDE_hesiod = @INCLUDE_hesiod@
INCLUDE_krb4 = @INCLUDE_krb4@
INCLUDE_libedit = @INCLUDE_libedit@
INCLUDE_libintl = @INCLUDE_libintl@
INCLUDE_openldap = @INCLUDE_openldap@
INCLUDE_readline = @INCLUDE_readline@
INCLUDE_sqlite3 = @INCLUDE_sqlite3@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
LD = @LD@
LDFLAGS = @LDFLAGS@
LDFLAGS_VERSION_SCRIPT = @LDFLAGS_VERSION_SCRIPT@
LEX = @LEX@
LEXLIB = @LEXLIB@
LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
LIBADD_roken = @LIBADD_roken@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIB_AUTH_SUBDIRS = @LIB_AUTH_SUBDIRS@
LIB_NDBM = @LIB_NDBM@
LIB_XauFileName = @LIB_XauFileName@
LIB_XauReadAuth = @LIB_XauReadAuth@
LIB_XauWriteAuth = @LIB_XauWriteAuth@
LIB_bswap16 = @LIB_bswap16@
LIB_bswap32 = @LIB_bswap32@
LIB_com_err = @LIB_com_err@
LIB_com_err_a = @LIB_com_err_a@
LIB_com_err_so = @LIB_com_err_so@
LIB_crypt = @LIB_crypt@
LIB_db_create = @LIB_db_create@
LIB_dbm_firstkey = @LIB_dbm_firstkey@
LIB_dbopen = @LIB_dbopen@
LIB_dispatch_async_f = @LIB_dispatch_async_f@
LIB_dlopen = @LIB_dlopen@
LIB_dn_expand = @LIB_dn_expand@
LIB_dns_search = @LIB_dns_search@
LIB_door_create = @LIB_door_create@
LIB_freeaddrinfo = @LIB_freeaddrinfo@
LIB_gai_strerror = @LIB_gai_strerror@
LIB_getaddrinfo = @LIB_getaddrinfo@
LIB_gethostbyname = @LIB_gethostbyname@
LIB_gethostbyname2 = @LIB_gethostbyname2@
LIB_getnameinfo = @LIB_getnameinfo@
LIB_getpwnam_r = @LIB_getpwnam_r@
LIB_getsockopt = @LIB_getsockopt@
LIB_hcrypto = @LIB_hcrypto@
LIB_hcrypto_a = @LIB_hcrypto_a@
LIB_hcrypto_appl = @LIB_hcrypto_appl@
LIB_hcrypto_so = @LIB_hcrypto_so@
LIB_hesiod = @LIB_hesiod@
LIB_hstrerror = @LIB_hstrerror@
LIB_kdb = @LIB_kdb@
LIB_krb4 = @LIB_krb4@
LIB_libedit = @LIB_libedit@
LIB_libintl = @LIB_libintl@
LIB_loadquery = @LIB_loadquery@
LIB_logout = @LIB_logout@
LIB_logwtmp = @LIB_logwtmp@
LIB_openldap = @LIB_openldap@
LIB_openpty = @LIB_openpty@
LIB_otp = @LIB_otp@
LIB_pidfile = @LIB_pidfile@
LIB_readline = @LIB_readline@
LIB_res_ndestroy = @LIB_res_ndestroy@
LIB_res_nsearch = @LIB_res_nsearch@
LIB_res_search = @LIB_res_search@
LIB_roken = @LIB_roken@
LIB_security = @LIB_security@
LIB_setsockopt = @LIB_setsockopt@
LIB_socket = @LIB_socket@
LIB_sqlite3 = @LIB_sqlite3@
LIB_syslog = @LIB_syslog@
LIB_tgetent = @LIB_tgetent@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MANIFEST_TOOL = @MANIFEST_TOOL@
MKDIR_P = @MKDIR_P@
NM = @NM@
NMEDIT = @NMEDIT@
NO_AFS = @NO_AFS@
NROFF = @NROFF@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
PKG_CONFIG = @PKG_CONFIG@
PTHREAD_CFLAGS = @PTHREAD_CFLAGS@
PTHREAD_LDADD = @PTHREAD_LDADD@
PTHREAD_LIBADD = @PTHREAD_LIBADD@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
SLC = @SLC@
SLC_DEP = @SLC_DEP@
STRIP = @STRIP@
VERSION = @VERSION@
VERSIONING = @VERSIONING@
WFLAGS = @WFLAGS@
WFLAGS_NOIMPLICITINT = @WFLAGS_NOIMPLICITINT@
WFLAGS_NOUNUSED = @WFLAGS_NOUNUSED@
XMKMF = @XMKMF@
X_CFLAGS = @X_CFLAGS@
X_EXTRA_LIBS = @X_EXTRA_LIBS@
X_LIBS = @X_LIBS@
X_PRE_LIBS = @X_PRE_LIBS@
YACC = @YACC@
YFLAGS = @YFLAGS@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_AR = @ac_ct_AR@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dpagaix_cflags = @dpagaix_cflags@
dpagaix_ldadd = @dpagaix_ldadd@
dpagaix_ldflags = @dpagaix_ldflags@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
subdirs = @subdirs@
sysconfdir = @sysconfdir@
target_alias = @target_alias@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
SUFFIXES = .et .h .x .z .hx .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8
DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir)/include -I$(top_srcdir)/include
AM_CPPFLAGS = $(INCLUDES_roken)
@do_roken_rename_TRUE@ROKEN_RENAME = -DROKEN_RENAME
AM_CFLAGS = $(WFLAGS)
CP = cp
buildinclude = $(top_builddir)/include
LIB_el_init = @LIB_el_init@
LIB_getattr = @LIB_getattr@
LIB_getpwent_r = @LIB_getpwent_r@
LIB_odm_initialize = @LIB_odm_initialize@
LIB_setpcred = @LIB_setpcred@
HESIODLIB = @HESIODLIB@
HESIODINCLUDE = @HESIODINCLUDE@
libexec_heimdaldir = $(libexecdir)/heimdal
NROFF_MAN = groff -mandoc -Tascii
LIB_kafs = $(top_builddir)/lib/kafs/libkafs.la $(AIX_EXTRA_KAFS)
@KRB5_TRUE@LIB_krb5 = $(top_builddir)/lib/krb5/libkrb5.la \
@KRB5_TRUE@ $(top_builddir)/lib/asn1/libasn1.la
@KRB5_TRUE@LIB_gssapi = $(top_builddir)/lib/gssapi/libgssapi.la
LIB_heimbase = $(top_builddir)/base/libheimbase.la
@DCE_TRUE@LIB_kdfs = $(top_builddir)/lib/kdfs/libkdfs.la
SUBDIRS = common ftp ftpd
EXTRA_DIST = NTMakefile
all: all-recursive
.SUFFIXES:
.SUFFIXES: .et .h .x .z .hx .1 .3 .5 .8 .cat1 .cat3 .cat5 .cat8 .c
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(top_srcdir)/Makefile.am.common $(top_srcdir)/cf/Makefile.am.common $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
&& { if test -f $@; then exit 0; else break; fi; }; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign appl/ftp/Makefile'; \
$(am__cd) $(top_srcdir) && \
$(AUTOMAKE) --foreign appl/ftp/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(am__aclocal_m4_deps):
mostlyclean-libtool:
-rm -f *.lo
clean-libtool:
-rm -rf .libs _libs
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@fail= failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
set x; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
shift; \
if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
if test $$# -gt 0; then \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
"$$@" $$unique; \
else \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$unique; \
fi; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& $(am__cd) $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) "$$here"
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d "$(distdir)/$$file"; then \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
fi; \
cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
else \
test -f "$(distdir)/$$file" \
|| cp -p $$d/$$file "$(distdir)/$$file" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
fi; \
done
@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
$(am__relativize); \
new_distdir=$$reldir; \
dir1=$$subdir; dir2="$(top_distdir)"; \
$(am__relativize); \
new_top_distdir=$$reldir; \
echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
($(am__cd) $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$new_top_distdir" \
distdir="$$new_distdir" \
am__remove_distdir=: \
am__skip_length_check=: \
am__skip_mode_fix=: \
distdir) \
|| exit 1; \
fi; \
done
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$(top_distdir)" distdir="$(distdir)" \
dist-hook
check-am: all-am
$(MAKE) $(AM_MAKEFLAGS) check-local
check: check-recursive
all-am: Makefile all-local
installdirs: installdirs-recursive
installdirs-am:
install: install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
clean-generic:
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
clean: clean-recursive
clean-am: clean-generic clean-libtool mostlyclean-am
distclean: distclean-recursive
-rm -f Makefile
distclean-am: clean-am distclean-generic distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
html-am:
info: info-recursive
info-am:
install-data-am:
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-data-hook
install-dvi: install-dvi-recursive
install-dvi-am:
install-exec-am:
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) install-exec-hook
install-html: install-html-recursive
install-html-am:
install-info: install-info-recursive
install-info-am:
install-man:
install-pdf: install-pdf-recursive
install-pdf-am:
install-ps: install-ps-recursive
install-ps-am:
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-generic mostlyclean-libtool
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am:
@$(NORMAL_INSTALL)
$(MAKE) $(AM_MAKEFLAGS) uninstall-hook
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) check-am \
ctags-recursive install-am install-data-am install-exec-am \
install-strip tags-recursive uninstall-am
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am all-local check check-am check-local clean \
clean-generic clean-libtool ctags ctags-recursive dist-hook \
distclean distclean-generic distclean-libtool distclean-tags \
distdir dvi dvi-am html html-am info info-am install \
install-am install-data install-data-am install-data-hook \
install-dvi install-dvi-am install-exec install-exec-am \
install-exec-hook install-html install-html-am install-info \
install-info-am install-man install-pdf install-pdf-am \
install-ps install-ps-am install-strip installcheck \
installcheck-am installdirs installdirs-am maintainer-clean \
maintainer-clean-generic mostlyclean mostlyclean-generic \
mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
uninstall uninstall-am uninstall-hook
install-suid-programs:
@foo='$(bin_SUIDS)'; \
for file in $$foo; do \
x=$(DESTDIR)$(bindir)/$$file; \
if chown 0:0 $$x && chmod u+s $$x; then :; else \
echo "*"; \
echo "* Failed to install $$x setuid root"; \
echo "*"; \
fi; done
install-exec-hook: install-suid-programs
install-build-headers:: $(include_HEADERS) $(dist_include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ) $(nobase_include_HEADERS)
@foo='$(include_HEADERS) $(dist_include_HEADERS) $(nodist_include_HEADERS) $(build_HEADERZ)'; \
for f in $$foo; do \
f=`basename $$f`; \
if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \
else file="$$f"; fi; \
if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \
: ; else \
echo " $(CP) $$file $(buildinclude)/$$f"; \
$(CP) $$file $(buildinclude)/$$f; \
fi ; \
done ; \
foo='$(nobase_include_HEADERS)'; \
for f in $$foo; do \
if test -f "$(srcdir)/$$f"; then file="$(srcdir)/$$f"; \
else file="$$f"; fi; \
$(mkdir_p) $(buildinclude)/`dirname $$f` ; \
if cmp -s $$file $(buildinclude)/$$f 2> /dev/null ; then \
: ; else \
echo " $(CP) $$file $(buildinclude)/$$f"; \
$(CP) $$file $(buildinclude)/$$f; \
fi ; \
done
all-local: install-build-headers
check-local::
@if test '$(CHECK_LOCAL)' = "no-check-local"; then \
foo=''; elif test '$(CHECK_LOCAL)'; then \
foo='$(CHECK_LOCAL)'; else \
foo='$(PROGRAMS)'; fi; \
if test "$$foo"; then \
failed=0; all=0; \
for i in $$foo; do \
all=`expr $$all + 1`; \
if (./$$i --version && ./$$i --help) > /dev/null 2>&1; then \
echo "PASS: $$i"; \
else \
echo "FAIL: $$i"; \
failed=`expr $$failed + 1`; \
fi; \
done; \
if test "$$failed" -eq 0; then \
banner="All $$all tests passed"; \
else \
banner="$$failed of $$all tests failed"; \
fi; \
dashes=`echo "$$banner" | sed s/./=/g`; \
echo "$$dashes"; \
echo "$$banner"; \
echo "$$dashes"; \
test "$$failed" -eq 0 || exit 1; \
fi
.x.c:
@cmp -s $< $@ 2> /dev/null || cp $< $@
.hx.h:
@cmp -s $< $@ 2> /dev/null || cp $< $@
#NROFF_MAN = nroff -man
.1.cat1:
$(NROFF_MAN) $< > $@
.3.cat3:
$(NROFF_MAN) $< > $@
.5.cat5:
$(NROFF_MAN) $< > $@
.8.cat8:
$(NROFF_MAN) $< > $@
dist-cat1-mans:
@foo='$(man1_MANS)'; \
bar='$(man_MANS)'; \
for i in $$bar; do \
case $$i in \
*.1) foo="$$foo $$i";; \
esac; done ;\
for i in $$foo; do \
x=`echo $$i | sed 's/\.[^.]*$$/.cat1/'`; \
echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
done
dist-cat3-mans:
@foo='$(man3_MANS)'; \
bar='$(man_MANS)'; \
for i in $$bar; do \
case $$i in \
*.3) foo="$$foo $$i";; \
esac; done ;\
for i in $$foo; do \
x=`echo $$i | sed 's/\.[^.]*$$/.cat3/'`; \
echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
done
dist-cat5-mans:
@foo='$(man5_MANS)'; \
bar='$(man_MANS)'; \
for i in $$bar; do \
case $$i in \
*.5) foo="$$foo $$i";; \
esac; done ;\
for i in $$foo; do \
x=`echo $$i | sed 's/\.[^.]*$$/.cat5/'`; \
echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
done
dist-cat8-mans:
@foo='$(man8_MANS)'; \
bar='$(man_MANS)'; \
for i in $$bar; do \
case $$i in \
*.8) foo="$$foo $$i";; \
esac; done ;\
for i in $$foo; do \
x=`echo $$i | sed 's/\.[^.]*$$/.cat8/'`; \
echo "$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x"; \
$(NROFF_MAN) $(srcdir)/$$i > $(distdir)/$$x; \
done
dist-hook: dist-cat1-mans dist-cat3-mans dist-cat5-mans dist-cat8-mans
install-cat-mans:
$(SHELL) $(top_srcdir)/cf/install-catman.sh install "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS)
uninstall-cat-mans:
$(SHELL) $(top_srcdir)/cf/install-catman.sh uninstall "$(INSTALL_DATA)" "$(mkinstalldirs)" "$(srcdir)" "$(DESTDIR)$(mandir)" '$(CATMANEXT)' $(man_MANS) $(man1_MANS) $(man3_MANS) $(man5_MANS) $(man8_MANS)
install-data-hook: install-cat-mans
uninstall-hook: uninstall-cat-mans
.et.h:
$(COMPILE_ET) $<
.et.c:
$(COMPILE_ET) $<
#
# Useful target for debugging
#
check-valgrind:
tobjdir=`cd $(top_builddir) && pwd` ; \
tsrcdir=`cd $(top_srcdir) && pwd` ; \
env TESTS_ENVIRONMENT="$${tsrcdir}/cf/maybe-valgrind.sh -s $${tsrcdir} -o $${tobjdir}" make check
#
# Target to please samba build farm, builds distfiles in-tree.
# Will break when automake changes...
#
distdir-in-tree: $(DISTFILES) $(INFO_DEPS)
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" != .; then \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) distdir-in-tree) ; \
fi ; \
done
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: