/*
* Copyright (c) 2010 The FreeBSD Foundation
* Copyright (c) 2010-2011 Semihalf
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Marvell DB-78460 Device Tree Source.
*
* $FreeBSD$
*/
/dts-v1/;
/ {
model = "mrvl,DB-78460";
#address-cells = <1>;
#size-cells = <1>;
aliases {
serial0 = &serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
device_type = "cpu";
compatible = "ARM,88VS584";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <0x8000>; // L1, 32K
i-cache-size = <0x8000>; // L1, 32K
timebase-frequency = <0>;
bus-frequency = <200000000>;
clock-frequency = <0>;
};
};
memory {
device_type = "memory";
reg = <0x0 0x80000000>; // 2G at 0x0
};
soc78460@d0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
ranges = <0x0 0xd0000000 0x00100000>;
bus-frequency = <0>;
MPIC: mpic@20a00 {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x20a00 0x500 0x21870 0x58 0x20400 0x100>;
compatible = "mrvl,mpic";
};
rtc@10300 {
compatible = "mrvl,rtc";
reg = <0x10300 0x08>;
};
timer@21840 {
compatible = "mrvl,timer";
reg = <0x21840 0x30>;
interrupts = <5>;
interrupt-parent = <&MPIC>;
mrvl,has-wdt;
};
twsi@11000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mrvl,twsi";
reg = <0x11000 0x20>;
interrupts = <31>;
interrupt-parent = <&MPIC>;
};
twsi@11100 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mrvl,twsi";
reg = <0x11100 0x20>;
interrupts = <32>;
interrupt-parent = <&MPIC>;
};
serial0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x20>;
reg-shift = <2>;
current-speed = <115200>;
clock-frequency = <0>;
interrupts = <41>;
interrupt-parent = <&MPIC>;
};
serial1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x20>;
reg-shift = <2>;
current-speed = <115200>;
clock-frequency = <0>;
interrupts = <42>;
interrupt-parent = <&MPIC>;
};
serial2: serial@12200 {
compatible = "snps,dw-apb-uart";
reg = <0x12200 0x20>;
reg-shift = <2>;
current-speed = <115200>;
clock-frequency = <0>;
interrupts = <43>;
interrupt-parent = <&MPIC>;
};
serial3: serial@12300 {
compatible = "snps,dw-apb-uart";
reg = <0x12300 0x20>;
reg-shift = <2>;
current-speed = <115200>;
clock-frequency = <0>;
interrupts = <44>;
interrupt-parent = <&MPIC>;
};
MPP: mpp@10000 {
#pin-cells = <2>;
compatible = "mrvl,mpp";
reg = <0x18000 0x34>;
pin-count = <68>;
pin-map = <
0 1 /* MPP[0]: GE1_TXCLK */
1 1 /* MPP[1]: GE1_TXCTL */
2 1 /* MPP[2]: GE1_RXCTL */
3 1 /* MPP[3]: GE1_RXCLK */
4 1 /* MPP[4]: GE1_TXD[0] */
5 1 /* MPP[5]: GE1_TXD[1] */
6 1 /* MPP[6]: GE1_TXD[2] */
7 1 /* MPP[7]: GE1_TXD[3] */
8 1 /* MPP[8]: GE1_RXD[0] */
9 1 /* MPP[9]: GE1_RXD[1] */
10 1 /* MPP[10]: GE1_RXD[2] */
11 1 /* MPP[11]: GE1_RXD[3] */
12 2 /* MPP[13]: SYSRST_OUTn */
13 2 /* MPP[13]: SYSRST_OUTn */
14 2 /* MPP[14]: SATA1_ACTn */
15 2 /* MPP[15]: SATA0_ACTn */
16 2 /* MPP[16]: UA2_TXD */
17 2 /* MPP[17]: UA2_RXD */
18 2 /* MPP[18]: <UNKNOWN> */
19 2 /* MPP[19]: <UNKNOWN> */
20 2 /* MPP[20]: <UNKNOWN> */
21 2 /* MPP[21]: <UNKNOWN> */
22 2 /* MPP[22]: UA3_TXD */
23 2
24 0
25 0
26 0
27 0
28 4
29 0
30 1
31 1
32 1
33 1
34 1
35 1
36 1
37 1
38 1
39 1
40 0
41 3
42 1
43 1
44 2
45 2
46 4
47 3
48 0
49 1
50 1
51 1
52 1
53 1
54 1
55 1
56 1
57 0
58 1
59 1
60 1
61 1
62 1
63 1
64 1
65 1
66 1
67 2 >;
};
usb@50000 {
compatible = "mrvl,usb-ehci", "usb-ehci";
reg = <0x50000 0x1000>;
interrupts = <124 45>;
interrupt-parent = <&MPIC>;
};
usb@51000 {
compatible = "mrvl,usb-ehci", "usb-ehci";
reg = <0x51000 0x1000>;
interrupts = <124 46>;
interrupt-parent = <&MPIC>;
};
usb@52000 {
compatible = "mrvl,usb-ehci", "usb-ehci";
reg = <0x52000 0x1000>;
interrupts = <124 47>;
interrupt-parent = <&MPIC>;
};
enet0: ethernet@72000 {
#address-cells = <1>;
#size-cells = <1>;
model = "V2";
compatible = "mrvl,ge";
reg = <0x72000 0x2000>;
ranges = <0x0 0x72000 0x2000>;
local-mac-address = [ 00 04 01 07 84 60 ];
interrupts = <67 68 122 >;
interrupt-parent = <&MPIC>;
phy-handle = <&phy0>;
has-neta;
mdio@0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "mrvl,mdio";
phy0: ethernet-phy@0 {
reg = <0x0>;
};
phy1: ethernet-phy@1 {
reg = <0x1>;
};
phy2: ethernet-phy@2 {
reg = <0x19>;
};
phy3: ethernet-phy@3 {
reg = <0x1b>;
};
};
};
sata@A0000 {
compatible = "mrvl,sata";
reg = <0xA0000 0x6000>;
interrupts = <55>;
interrupt-parent = <&MPIC>;
};
};
pci0: pcie@d0040000 {
compatible = "mrvl,pcie";
device_type = "pci";
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
reg = <0xd0040000 0x2000>;
bus-range = <0 255>;
ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
0x01000000 0x0 0x00000000 0xa0000000 0x0 0x08000000>;
clock-frequency = <33333333>;
interrupt-parent = <&MPIC>;
interrupts = <120>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map = <
0x0800 0x0 0x0 0x1 &MPIC 0x3A
0x0800 0x0 0x0 0x2 &MPIC 0x3A
0x0800 0x0 0x0 0x3 &MPIC 0x3A
0x0800 0x0 0x0 0x4 &MPIC 0x3A
>;
};
sram@ffff0000 {
compatible = "mrvl,cesa-sram";
reg = <0xffff0000 0x00010000>;
};
chosen {
stdin = "serial0";
stdout = "serial0";
stddbg = "serial0";
};
};