Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

   1
   2
   3
   4
   5
   6
   7
   8
   9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
  24
  25
  26
  27
  28
  29
  30
  31
  32
  33
  34
  35
  36
  37
  38
  39
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49
  50
  51
  52
  53
  54
  55
  56
  57
  58
  59
  60
  61
  62
  63
  64
  65
  66
  67
  68
  69
  70
  71
  72
  73
  74
  75
  76
  77
  78
  79
  80
  81
  82
  83
  84
  85
  86
  87
  88
  89
  90
  91
  92
  93
  94
  95
  96
  97
  98
  99
 100
 101
 102
 103
 104
 105
 106
 107
 108
 109
 110
 111
 112
 113
 114
 115
 116
 117
 118
 119
 120
 121
 122
 123
 124
 125
 126
 127
 128
 129
 130
 131
 132
 133
 134
 135
 136
 137
 138
 139
 140
 141
 142
 143
 144
 145
 146
 147
 148
 149
 150
 151
 152
 153
 154
 155
 156
 157
 158
 159
 160
 161
 162
 163
 164
 165
 166
 167
 168
 169
 170
 171
 172
 173
 174
 175
 176
 177
 178
 179
 180
 181
 182
 183
 184
 185
 186
 187
 188
 189
 190
 191
 192
 193
 194
 195
 196
 197
 198
 199
 200
 201
 202
 203
 204
 205
 206
 207
 208
 209
 210
 211
 212
 213
 214
 215
 216
 217
 218
 219
 220
 221
 222
 223
 224
 225
 226
 227
 228
 229
 230
 231
 232
 233
 234
 235
 236
 237
 238
 239
 240
 241
 242
 243
 244
 245
 246
 247
 248
 249
 250
 251
 252
 253
 254
 255
 256
 257
 258
 259
 260
 261
 262
 263
 264
 265
 266
 267
 268
 269
 270
 271
 272
 273
 274
 275
 276
 277
 278
 279
 280
 281
 282
 283
 284
 285
 286
 287
 288
 289
 290
 291
 292
 293
 294
 295
 296
 297
 298
 299
 300
 301
 302
 303
 304
 305
 306
 307
 308
 309
 310
 311
 312
 313
 314
 315
 316
 317
 318
 319
 320
 321
 322
 323
 324
 325
 326
 327
 328
 329
 330
 331
 332
 333
 334
 335
 336
 337
 338
 339
 340
 341
 342
 343
 344
 345
 346
 347
 348
 349
 350
 351
 352
 353
 354
 355
 356
 357
 358
 359
 360
 361
 362
 363
 364
 365
 366
 367
 368
 369
 370
 371
 372
 373
 374
 375
 376
 377
 378
 379
 380
 381
 382
 383
 384
 385
 386
 387
 388
 389
 390
 391
 392
 393
 394
 395
 396
 397
 398
 399
 400
 401
 402
 403
 404
 405
 406
 407
 408
 409
 410
 411
 412
 413
 414
 415
 416
 417
 418
 419
 420
 421
 422
 423
 424
 425
 426
 427
 428
 429
 430
 431
 432
 433
 434
 435
 436
 437
 438
 439
 440
 441
 442
 443
 444
 445
 446
 447
 448
 449
 450
 451
 452
 453
 454
 455
 456
 457
 458
 459
 460
 461
 462
 463
 464
 465
 466
 467
 468
 469
 470
 471
 472
 473
 474
 475
 476
 477
 478
 479
 480
 481
 482
 483
 484
 485
 486
 487
 488
 489
 490
 491
 492
 493
 494
 495
 496
 497
 498
 499
 500
 501
 502
 503
 504
 505
 506
 507
 508
 509
 510
 511
 512
 513
 514
 515
 516
 517
 518
 519
 520
 521
 522
 523
 524
 525
 526
 527
 528
 529
 530
 531
 532
 533
 534
 535
 536
 537
 538
 539
 540
 541
 542
 543
 544
 545
 546
 547
 548
 549
 550
 551
 552
 553
 554
 555
 556
 557
 558
 559
 560
 561
 562
 563
 564
 565
 566
 567
 568
 569
 570
 571
 572
 573
 574
 575
 576
 577
 578
 579
 580
 581
 582
 583
 584
 585
 586
 587
 588
 589
 590
 591
 592
 593
 594
 595
 596
 597
 598
 599
 600
 601
 602
 603
 604
 605
 606
 607
 608
 609
 610
 611
 612
 613
 614
 615
 616
 617
 618
 619
 620
 621
 622
 623
 624
 625
 626
 627
 628
 629
 630
 631
 632
 633
 634
 635
 636
 637
 638
 639
 640
 641
 642
 643
 644
 645
 646
 647
 648
 649
 650
 651
 652
 653
 654
 655
 656
 657
 658
 659
 660
 661
 662
 663
 664
 665
 666
 667
 668
 669
 670
 671
 672
 673
 674
 675
 676
 677
 678
 679
 680
 681
 682
 683
 684
 685
 686
 687
 688
 689
 690
 691
 692
 693
 694
 695
 696
 697
 698
 699
 700
 701
 702
 703
 704
 705
 706
 707
 708
 709
 710
 711
 712
 713
 714
 715
 716
 717
 718
 719
 720
 721
 722
 723
 724
 725
 726
 727
 728
 729
 730
 731
 732
 733
 734
 735
 736
 737
 738
 739
 740
 741
 742
 743
 744
 745
 746
 747
 748
 749
 750
 751
 752
 753
 754
 755
 756
 757
 758
 759
 760
 761
 762
 763
 764
 765
 766
 767
 768
 769
 770
 771
 772
 773
 774
 775
 776
 777
 778
 779
 780
 781
 782
 783
 784
 785
 786
 787
 788
 789
 790
 791
 792
 793
 794
 795
 796
 797
 798
 799
 800
 801
 802
 803
 804
 805
 806
 807
 808
 809
 810
 811
 812
 813
 814
 815
 816
 817
 818
 819
 820
 821
 822
 823
 824
 825
 826
 827
 828
 829
 830
 831
 832
 833
 834
 835
 836
 837
 838
 839
 840
 841
 842
 843
 844
 845
 846
 847
 848
 849
 850
 851
 852
 853
 854
 855
 856
 857
 858
 859
 860
 861
 862
 863
 864
 865
 866
 867
 868
 869
 870
 871
 872
 873
 874
 875
 876
 877
 878
 879
 880
 881
 882
 883
 884
 885
 886
 887
 888
 889
 890
 891
 892
 893
 894
 895
 896
 897
 898
 899
 900
 901
 902
 903
 904
 905
 906
 907
 908
 909
 910
 911
 912
 913
 914
 915
 916
 917
 918
 919
 920
 921
 922
 923
 924
 925
 926
 927
 928
 929
 930
 931
 932
 933
 934
 935
 936
 937
 938
 939
 940
 941
 942
 943
 944
 945
 946
 947
 948
 949
 950
 951
 952
 953
 954
 955
 956
 957
 958
 959
 960
 961
 962
 963
 964
 965
 966
 967
 968
 969
 970
 971
 972
 973
 974
 975
 976
 977
 978
 979
 980
 981
 982
 983
 984
 985
 986
 987
 988
 989
 990
 991
 992
 993
 994
 995
 996
 997
 998
 999
1000
1001
/*-
 * Copyright (c) 2017 Alexander Motin <mav@FreeBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * The Non-Transparent Bridge (NTB) is a device that allows you to connect
 * two or more systems using a PCI-e links, providing remote memory access.
 *
 * This module contains a driver for NTBs in PLX/Avago/Broadcom PCIe bridges.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/sysctl.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/bus.h>
#include <machine/intr_machdep.h>
#include <machine/resource.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>

#include "../ntb.h"

#define PLX_MAX_BARS		4	/* There are at most 4 data BARs. */
#define PLX_NUM_SPAD		8	/* There are 8 scratchpads. */
#define PLX_NUM_SPAD_PATT	4	/* Use test pattern as 4 more. */
#define PLX_NUM_DB		16	/* There are 16 doorbells. */

struct ntb_plx_mw_info {
	int			 mw_bar;
	int			 mw_64bit;
	int			 mw_rid;
	struct resource		*mw_res;
	vm_paddr_t		 mw_pbase;
	caddr_t			 mw_vbase;
	vm_size_t		 mw_size;
	vm_memattr_t		 mw_map_mode;
	bus_addr_t		 mw_xlat_addr;
	size_t			 mw_xlat_size;
};

struct ntb_plx_softc {
	/* ntb.c context. Do not move! Must go first! */
	void			*ntb_store;

	device_t		 dev;
	struct resource		*conf_res;
	int			 conf_rid;
	u_int			 ntx;		/* NTx number within chip. */
	u_int			 link;		/* Link v/s Virtual side. */
	u_int			 port;		/* Port number within chip. */
	u_int			 alut;		/* A-LUT is enabled for NTx */

	int			 int_rid;
	struct resource		*int_res;
	void			*int_tag;

	struct ntb_plx_mw_info	 mw_info[PLX_MAX_BARS];
	int			 mw_count;	/* Number of memory windows. */

	int			 spad_count1;	/* Number of standard spads. */
	int			 spad_count2;	/* Number of extra spads. */
	uint32_t		 spad_off1;	/* Offset of our spads. */
	uint32_t		 spad_off2;	/* Offset of our extra spads. */
	uint32_t		 spad_offp1;	/* Offset of peer spads. */
	uint32_t		 spad_offp2;	/* Offset of peer extra spads. */

	/* Parameters of window shared with peer config access in B2B mode. */
	int			 b2b_mw;	/* Shared window number. */
	uint64_t		 b2b_off;	/* Offset in shared window. */
};

#define	PLX_NT0_BASE		0x3E000
#define	PLX_NT1_BASE		0x3C000
#define	PLX_NTX_BASE(sc)	((sc)->ntx ? PLX_NT1_BASE : PLX_NT0_BASE)
#define	PLX_NTX_LINK_OFFSET	0x01000

/* Bases of NTx our/peer interface registers */
#define	PLX_NTX_OUR_BASE(sc)				\
    (PLX_NTX_BASE(sc) + ((sc)->link ? PLX_NTX_LINK_OFFSET : 0))
#define	PLX_NTX_PEER_BASE(sc)				\
    (PLX_NTX_BASE(sc) + ((sc)->link ? 0 : PLX_NTX_LINK_OFFSET))

/* Read/write NTx our interface registers */
#define	NTX_READ(sc, reg)				\
    bus_read_4((sc)->conf_res, PLX_NTX_OUR_BASE(sc) + (reg))
#define	NTX_WRITE(sc, reg, val)				\
    bus_write_4((sc)->conf_res, PLX_NTX_OUR_BASE(sc) + (reg), (val))

/* Read/write NTx peer interface registers */
#define	PNTX_READ(sc, reg)				\
    bus_read_4((sc)->conf_res, PLX_NTX_PEER_BASE(sc) + (reg))
#define	PNTX_WRITE(sc, reg, val)			\
    bus_write_4((sc)->conf_res, PLX_NTX_PEER_BASE(sc) + (reg), (val))

/* Read/write B2B NTx registers */
#define	BNTX_READ(sc, reg)				\
    bus_read_4((sc)->mw_info[(sc)->b2b_mw].mw_res,	\
    PLX_NTX_BASE(sc) + (reg))
#define	BNTX_WRITE(sc, reg, val)			\
    bus_write_4((sc)->mw_info[(sc)->b2b_mw].mw_res,	\
    PLX_NTX_BASE(sc) + (reg), (val))

#define	PLX_PORT_BASE(p)		((p) << 12)
#define	PLX_STATION_PORT_BASE(sc)	PLX_PORT_BASE((sc)->port & ~7)

#define	PLX_PORT_CONTROL(sc)		(PLX_STATION_PORT_BASE(sc) + 0x208)

static int ntb_plx_init(device_t dev);
static int ntb_plx_detach(device_t dev);
static int ntb_plx_mw_set_trans_internal(device_t dev, unsigned mw_idx);

static int
ntb_plx_probe(device_t dev)
{

	switch (pci_get_devid(dev)) {
	case 0x87a010b5:
		device_set_desc(dev, "PLX Non-Transparent Bridge NT0 Link");
		return (BUS_PROBE_DEFAULT);
	case 0x87a110b5:
		device_set_desc(dev, "PLX Non-Transparent Bridge NT1 Link");
		return (BUS_PROBE_DEFAULT);
	case 0x87b010b5:
		device_set_desc(dev, "PLX Non-Transparent Bridge NT0 Virtual");
		return (BUS_PROBE_DEFAULT);
	case 0x87b110b5:
		device_set_desc(dev, "PLX Non-Transparent Bridge NT1 Virtual");
		return (BUS_PROBE_DEFAULT);
	}
	return (ENXIO);
}

static int
ntb_plx_init(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;
	uint64_t val64;
	int i;
	uint32_t val;

	if (sc->b2b_mw >= 0) {
		/* Set peer BAR0/1 size and address for B2B NTx access. */
		mw = &sc->mw_info[sc->b2b_mw];
		if (mw->mw_64bit) {
			PNTX_WRITE(sc, 0xe4, 0x3);	/* 64-bit */
			val64 = 0x2000000000000000 * mw->mw_bar | 0x4;
			PNTX_WRITE(sc, PCIR_BAR(0), val64);
			PNTX_WRITE(sc, PCIR_BAR(0) + 4, val64 >> 32);
		} else {
			PNTX_WRITE(sc, 0xe4, 0x2);	/* 32-bit */
			val = 0x20000000 * mw->mw_bar;
			PNTX_WRITE(sc, PCIR_BAR(0), val);
		}

		/* Set Virtual to Link address translation for B2B. */
		for (i = 0; i < sc->mw_count; i++) {
			mw = &sc->mw_info[i];
			if (mw->mw_64bit) {
				val64 = 0x2000000000000000 * mw->mw_bar;
				NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, val64);
				NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4 + 4, val64 >> 32);
			} else {
				val = 0x20000000 * mw->mw_bar;
				NTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, val);
			}
		}

		/* Make sure Virtual to Link A-LUT is disabled. */
		if (sc->alut)
			PNTX_WRITE(sc, 0xc94, 0);

		/* Enable Link Interface LUT entries 0/1 for peer 0/1. */
		PNTX_WRITE(sc, 0xdb4, 0x00090001);
	}

	/*
	 * Enable Virtual Interface LUT entry 0 for 0:0.0 and
	 * entry 1 for our Requester ID reported by chip.
	 */
	val = (NTX_READ(sc, 0xc90) << 16) | 0x00010001;
	NTX_WRITE(sc, sc->link ? 0xdb4 : 0xd94, val);

	/* Set Link to Virtual address translation. */
	for (i = 0; i < sc->mw_count; i++) {
		mw = &sc->mw_info[i];
		if (mw->mw_xlat_size != 0)
			ntb_plx_mw_set_trans_internal(dev, i);
	}

	pci_enable_busmaster(dev);
	if (sc->b2b_mw >= 0)
		PNTX_WRITE(sc, PCIR_COMMAND, PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);

	return (0);
}

static void
ntb_plx_isr(void *arg)
{
	device_t dev = arg;
	struct ntb_plx_softc *sc = device_get_softc(dev);
	uint32_t val;

	ntb_db_event((device_t)arg, 0);

	if (sc->link)	/* Link Interface has no Link Error registers. */
		return;

	val = NTX_READ(sc, 0xfe0);
	if (val == 0)
		return;
	NTX_WRITE(sc, 0xfe0, val);
	if (val & 1)
		device_printf(dev, "Correctable Error\n");
	if (val & 2)
		device_printf(dev, "Uncorrectable Error\n");
	if (val & 4) {
		/* DL_Down resets link side registers, have to reinit. */
		ntb_plx_init(dev);
		ntb_link_event(dev);
	}
	if (val & 8)
		device_printf(dev, "Uncorrectable Error Message Drop\n");
}

static int
ntb_plx_setup_intr(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	int error;

	/*
	 * XXX: This hardware supports MSI, but I found it unusable.
	 * It generates new MSI only when doorbell register goes from
	 * zero, but does not generate it when another bit is set or on
	 * partial clear.  It makes operation very racy and unreliable.
	 * The data book mentions some mask juggling magic to workaround
	 * that, but I failed to make it work.
	 */
	sc->int_rid = 0;
	sc->int_res = bus_alloc_resource_any(dev, SYS_RES_IRQ,
	    &sc->int_rid, RF_SHAREABLE|RF_ACTIVE);
	if (sc->int_res == NULL) {
		device_printf(dev, "bus_alloc_resource failed\n");
		return (ENOMEM);
	}
	error = bus_setup_intr(dev, sc->int_res, INTR_MPSAFE | INTR_TYPE_MISC,
	    NULL, ntb_plx_isr, dev, &sc->int_tag);
	if (error != 0) {
		device_printf(dev, "bus_setup_intr failed: %d\n", error);
		return (error);
	}

	if (!sc->link) { /* Link Interface has no Link Error registers. */
		NTX_WRITE(sc, 0xfe0, 0xf);	/* Clear link interrupts. */
		NTX_WRITE(sc, 0xfe4, 0x0);	/* Unmask link interrupts. */
	}
	return (0);
}

static void
ntb_plx_teardown_intr(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	if (!sc->link)	/* Link Interface has no Link Error registers. */
		NTX_WRITE(sc, 0xfe4, 0xf);	/* Mask link interrupts. */

	if (sc->int_res) {
		bus_teardown_intr(dev, sc->int_res, sc->int_tag);
		bus_release_resource(dev, SYS_RES_IRQ, sc->int_rid,
		    sc->int_res);
	}
}

static int
ntb_plx_attach(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;
	int error = 0, i;
	uint32_t val;
	char buf[32];

	/* Identify what we are (what side of what NTx). */
	sc->dev = dev;
	val = pci_read_config(dev, 0xc8c, 4);
	sc->ntx = (val & 1) != 0;
	sc->link = (val & 0x80000000) != 0;

	/* Get access to whole 256KB of chip configuration space via BAR0/1. */
	sc->conf_rid = PCIR_BAR(0);
	sc->conf_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
	    &sc->conf_rid, RF_ACTIVE);
	if (sc->conf_res == NULL) {
		device_printf(dev, "Can't allocate configuration BAR.\n");
		return (ENXIO);
	}

	/* Identify chip port we are connected to. */
	val = bus_read_4(sc->conf_res, 0x360);
	sc->port = (val >> ((sc->ntx == 0) ? 8 : 16)) & 0x1f;

	/* Detect A-LUT enable and size. */
	val >>= 30;
	sc->alut = (val == 0x3) ? 1 : ((val & (1 << sc->ntx)) ? 2 : 0);
	if (sc->alut)
		device_printf(dev, "%u A-LUT entries\n", 128 * sc->alut);

	/* Find configured memory windows at BAR2-5. */
	sc->mw_count = 0;
	for (i = 2; i <= 5; i++) {
		mw = &sc->mw_info[sc->mw_count];
		mw->mw_bar = i;
		mw->mw_rid = PCIR_BAR(mw->mw_bar);
		mw->mw_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
		    &mw->mw_rid, RF_ACTIVE);
		if (mw->mw_res == NULL)
			continue;
		mw->mw_pbase = rman_get_start(mw->mw_res);
		mw->mw_size = rman_get_size(mw->mw_res);
		mw->mw_vbase = rman_get_virtual(mw->mw_res);
		mw->mw_map_mode = VM_MEMATTR_UNCACHEABLE;
		sc->mw_count++;

		/* Skip over adjacent BAR for 64-bit BARs. */
		val = pci_read_config(dev, PCIR_BAR(mw->mw_bar), 4);
		if ((val & PCIM_BAR_MEM_TYPE) == PCIM_BAR_MEM_64) {
			mw->mw_64bit = 1;
			i++;
		}
	}

	/* Try to identify B2B mode. */
	i = 1;
	snprintf(buf, sizeof(buf), "hint.%s.%d.b2b", device_get_name(dev),
	    device_get_unit(dev));
	TUNABLE_INT_FETCH(buf, &i);
	if (sc->link) {
		device_printf(dev, "NTB-to-Root Port mode (Link Interface)\n");
		sc->b2b_mw = -1;
	} else if (i == 0) {
		device_printf(dev, "NTB-to-Root Port mode (Virtual Interface)\n");
		sc->b2b_mw = -1;
	} else {
		device_printf(dev, "NTB-to-NTB (back-to-back) mode\n");

		/* We need at least one memory window for B2B peer access. */
		if (sc->mw_count == 0) {
			device_printf(dev, "No memory window BARs enabled.\n");
			error = ENXIO;
			goto out;
		}
		sc->b2b_mw = sc->mw_count - 1;

		/* Use half of the window for B2B, but no less then 1MB. */
		mw = &sc->mw_info[sc->b2b_mw];
		if (mw->mw_size >= 2 * 1024 * 1024)
			sc->b2b_off = mw->mw_size / 2;
		else
			sc->b2b_off = 0;
	}

	/*
	 * Use Physical Layer User Test Pattern as additional scratchpad.
	 * Make sure they are present and enabled by writing to them.
	 * XXX: Its a hack, but standard 8 registers are not enough.
	 */
	sc->spad_offp1 = sc->spad_off1 = PLX_NTX_OUR_BASE(sc) + 0xc6c;
	sc->spad_offp2 = sc->spad_off2 = PLX_PORT_BASE(sc->ntx * 8) + 0x20c;
	if (sc->b2b_mw >= 0) {
		/* In NTB-to-NTB mode each side has own scratchpads. */
		sc->spad_count1 = PLX_NUM_SPAD;
		bus_write_4(sc->conf_res, sc->spad_off2, 0x12345678);
		if (bus_read_4(sc->conf_res, sc->spad_off2) == 0x12345678)
			sc->spad_count2 = PLX_NUM_SPAD_PATT;
	} else {
		/* Otherwise we have share scratchpads with the peer. */
		if (sc->link) {
			sc->spad_off1 += PLX_NUM_SPAD / 2 * 4;
			sc->spad_off2 += PLX_NUM_SPAD_PATT / 2 * 4;
		} else {
			sc->spad_offp1 += PLX_NUM_SPAD / 2 * 4;
			sc->spad_offp2 += PLX_NUM_SPAD_PATT / 2 * 4;
		}
		sc->spad_count1 = PLX_NUM_SPAD / 2;
		bus_write_4(sc->conf_res, sc->spad_off2, 0x12345678);
		if (bus_read_4(sc->conf_res, sc->spad_off2) == 0x12345678)
			sc->spad_count2 = PLX_NUM_SPAD_PATT / 2;
	}

	/* Apply static part of NTB configuration. */
	ntb_plx_init(dev);

	/* Allocate and setup interrupts. */
	error = ntb_plx_setup_intr(dev);
	if (error)
		goto out;

	/* Attach children to this controller */
	error = ntb_register_device(dev);

out:
	if (error != 0)
		ntb_plx_detach(dev);
	return (error);
}

static int
ntb_plx_detach(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;
	int i;

	/* Detach & delete all children */
	ntb_unregister_device(dev);

	/* Disable and free interrupts. */
	ntb_plx_teardown_intr(dev);

	/* Free memory resources. */
	for (i = 0; i < sc->mw_count; i++) {
		mw = &sc->mw_info[i];
		bus_release_resource(dev, SYS_RES_MEMORY, mw->mw_rid,
		    mw->mw_res);
	}
	bus_release_resource(dev, SYS_RES_MEMORY, sc->conf_rid, sc->conf_res);
	return (0);
}


static bool
ntb_plx_link_is_up(device_t dev, enum ntb_speed *speed, enum ntb_width *width)
{
	uint16_t link;

	link = pcie_read_config(dev, PCIER_LINK_STA, 2);
	if (speed != NULL)
		*speed = (link & PCIEM_LINK_STA_SPEED);
	if (width != NULL)
		*width = (link & PCIEM_LINK_STA_WIDTH) >> 4;
	return ((link & PCIEM_LINK_STA_WIDTH) != 0);
}

static int
ntb_plx_link_enable(device_t dev, enum ntb_speed speed __unused,
    enum ntb_width width __unused)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	uint32_t reg, val;

	/* The fact that we see the Link Interface means link is enabled. */
	if (sc->link) {
		ntb_link_event(dev);
		return (0);
	}

	reg = PLX_PORT_CONTROL(sc);
	val = bus_read_4(sc->conf_res, reg);
	if ((val & (1 << (sc->port & 7))) == 0) {
		/* If already enabled, generate fake link event and exit. */
		ntb_link_event(dev);
		return (0);
	}
	val &= ~(1 << (sc->port & 7));
	bus_write_4(sc->conf_res, reg, val);
	return (0);
}

static int
ntb_plx_link_disable(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	uint32_t reg, val;

	/* Link disable for Link Interface would be suicidal. */
	if (sc->link)
		return (0);

	reg = PLX_PORT_CONTROL(sc);
	val = bus_read_4(sc->conf_res, reg);
	val |= (1 << (sc->port & 7));
	bus_write_4(sc->conf_res, reg, val);
	return (0);
}

static bool
ntb_plx_link_enabled(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	uint32_t reg, val;

	/* The fact that we see the Link Interface means link is enabled. */
	if (sc->link)
		return (TRUE);

	reg = PLX_PORT_CONTROL(sc);
	val = bus_read_4(sc->conf_res, reg);
	return ((val & (1 << (sc->port & 7))) == 0);
}

static uint8_t
ntb_plx_mw_count(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	if (sc->b2b_mw >= 0 && sc->b2b_off == 0)
		return (sc->mw_count - 1); /* B2B consumed whole window. */
	return (sc->mw_count);
}

static int
ntb_plx_mw_get_range(device_t dev, unsigned mw_idx, vm_paddr_t *base,
    caddr_t *vbase, size_t *size, size_t *align, size_t *align_size,
    bus_addr_t *plimit)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;
	size_t off;

	if (mw_idx >= sc->mw_count)
		return (EINVAL);
	off = 0;
	if (mw_idx == sc->b2b_mw) {
		KASSERT(sc->b2b_off != 0,
		    ("user shouldn't get non-shared b2b mw"));
		off = sc->b2b_off;
	}
	mw = &sc->mw_info[mw_idx];

	/* Local to remote memory window parameters. */
	if (base != NULL)
		*base = mw->mw_pbase + off;
	if (vbase != NULL)
		*vbase = mw->mw_vbase + off;
	if (size != NULL)
		*size = mw->mw_size - off;

	/*
	 * Remote to local memory window translation address alignment.
	 * Translation address has to be aligned to the BAR size, but A-LUT
	 * entries re-map addresses can be aligned to 1/128 or 1/256 of it.
	 * XXX: In B2B mode we can change BAR size (and so alignmet) live,
	 * but there is no way to report it here, so report safe value.
	 */
	if (align != NULL) {
		if (sc->alut && mw->mw_bar == 2)
			*align = (mw->mw_size - off) / 128 / sc->alut;
		else
			*align = mw->mw_size - off;
	}

	/*
	 * Remote to local memory window size alignment.
	 * The chip has no limit registers, but A-LUT, when available, allows
	 * access control with granularity of 1/128 or 1/256 of the BAR size.
	 * XXX: In B2B case we can change BAR size live, but there is no way
	 * to report it, so report half of the BAR size, that should be safe.
	 * In non-B2B case there is no control at all, so report the BAR size.
	 */
	if (align_size != NULL) {
		if (sc->alut && mw->mw_bar == 2)
			*align_size = (mw->mw_size - off) / 128 / sc->alut;
		else if (sc->b2b_mw >= 0)
			*align_size = (mw->mw_size - off) / 2;
		else
			*align_size = mw->mw_size - off;
	}

	/* Remote to local memory window translation address upper limit. */
	if (plimit != NULL)
		*plimit = mw->mw_64bit ? BUS_SPACE_MAXADDR :
		    BUS_SPACE_MAXADDR_32BIT;
	return (0);
}

static int
ntb_plx_mw_set_trans_internal(device_t dev, unsigned mw_idx)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;
	uint64_t addr, eaddr, off, size, bsize, esize, val64;
	uint32_t val;
	int i;

	mw = &sc->mw_info[mw_idx];
	addr = mw->mw_xlat_addr;
	size = mw->mw_xlat_size;
	off = 0;
	if (mw_idx == sc->b2b_mw) {
		off = sc->b2b_off;
		KASSERT(off != 0, ("user shouldn't get non-shared b2b mw"));

		/*
		 * While generally we can set any BAR size on link side,
		 * for B2B shared window we can't go above preconfigured
		 * size due to BAR address alignment requirements.
		 */
		if (size > mw->mw_size - off)
			return (EINVAL);
	}

	if (size > 0) {
		/* Round BAR size to next power of 2 or at least 1MB. */
		bsize = size;
		if (!powerof2(bsize))
			bsize = 1LL << flsll(bsize);
		if (bsize < 1024 * 1024)
			bsize = 1024 * 1024;

		/* A-LUT has 128 or 256 times better granularity. */
		esize = bsize;
		if (sc->alut && mw->mw_bar == 2)
			esize /= 128 * sc->alut;

		/* addr should be aligned to BAR or A-LUT element size. */
		if ((addr & (esize - 1)) != 0)
			return (EINVAL);
	} else
		esize = bsize = 0;

	if (mw->mw_64bit) {
		if (sc->b2b_mw >= 0) {
			/* Set Link Interface BAR size and enable/disable it. */
			val64 = 0;
			if (bsize > 0)
				val64 = (~(bsize - 1) & ~0xfffff);
			val64 |= 0xc;
			PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4, val64);
			PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4 + 4, val64 >> 32);

			/* Set Link Interface BAR address. */
			val64 = 0x2000000000000000 * mw->mw_bar + off;
			PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar), val64);
			PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar) + 4, val64 >> 32);
		}

		/* Set Virtual Interface BARs address translation */
		PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, addr);
		PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4 + 4, addr >> 32);
	} else {
		/* Make sure we fit into 32-bit address space. */
		if ((addr & UINT32_MAX) != addr)
			return (ERANGE);
		if (((addr + bsize) & UINT32_MAX) != (addr + bsize))
			return (ERANGE);

		if (sc->b2b_mw >= 0) {
			/* Set Link Interface BAR size and enable/disable it. */
			val = 0;
			if (bsize > 0)
				val = (~(bsize - 1) & ~0xfffff);
			PNTX_WRITE(sc, 0xe8 + (mw->mw_bar - 2) * 4, val);

			/* Set Link Interface BAR address. */
			val64 = 0x20000000 * mw->mw_bar + off;
			PNTX_WRITE(sc, PCIR_BAR(mw->mw_bar), val64);
		}

		/* Set Virtual Interface BARs address translation */
		PNTX_WRITE(sc, 0xc3c + (mw->mw_bar - 2) * 4, addr);
	}

	/* Configure and enable Link to Virtual A-LUT if we need it. */
	if (sc->alut && mw->mw_bar == 2 &&
	    ((addr & (bsize - 1)) != 0 || size != bsize)) {
		eaddr = addr;
		for (i = 0; i < 128 * sc->alut; i++) {
			val = sc->link ? 0 : 1;
			if (sc->alut == 1)
				val += 2 * sc->ntx;
			val *= 0x1000 * sc->alut;
			val += 0x38000 + i * 4 + (i >= 128 ? 0x0e00 : 0);
			bus_write_4(sc->conf_res, val, eaddr);
			bus_write_4(sc->conf_res, val + 0x400, eaddr >> 32);
			bus_write_4(sc->conf_res, val + 0x800,
			    (eaddr < addr + size) ? 0x3 : 0);
			eaddr += esize;
		}
		NTX_WRITE(sc, 0xc94, 0x10000000);
	} else if (sc->alut && mw->mw_bar == 2)
		NTX_WRITE(sc, 0xc94, 0);

	return (0);
}

static int
ntb_plx_mw_set_trans(device_t dev, unsigned mw_idx, bus_addr_t addr, size_t size)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;

	if (mw_idx >= sc->mw_count)
		return (EINVAL);
	mw = &sc->mw_info[mw_idx];
	mw->mw_xlat_addr = addr;
	mw->mw_xlat_size = size;
	return (ntb_plx_mw_set_trans_internal(dev, mw_idx));
}

static int
ntb_plx_mw_clear_trans(device_t dev, unsigned mw_idx)
{

	return (ntb_plx_mw_set_trans(dev, mw_idx, 0, 0));
}

static int
ntb_plx_mw_get_wc(device_t dev, unsigned idx, vm_memattr_t *mode)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;

	if (idx >= sc->mw_count)
		return (EINVAL);
	mw = &sc->mw_info[idx];
	*mode = mw->mw_map_mode;
	return (0);
}

static int
ntb_plx_mw_set_wc(device_t dev, unsigned idx, vm_memattr_t mode)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;
	uint64_t off;
	int rc;

	if (idx >= sc->mw_count)
		return (EINVAL);
	mw = &sc->mw_info[idx];
	if (mw->mw_map_mode == mode)
		return (0);

	off = 0;
	if (idx == sc->b2b_mw) {
		KASSERT(sc->b2b_off != 0,
		    ("user shouldn't get non-shared b2b mw"));
		off = sc->b2b_off;
	}

	rc = pmap_change_attr((vm_offset_t)mw->mw_vbase + off,
	    mw->mw_size - off, mode);
	if (rc == 0)
		mw->mw_map_mode = mode;
	return (rc);
}

static uint8_t
ntb_plx_spad_count(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	return (sc->spad_count1 + sc->spad_count2);
}

static int
ntb_plx_spad_write(device_t dev, unsigned int idx, uint32_t val)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	u_int off;

	if (idx >= sc->spad_count1 + sc->spad_count2)
		return (EINVAL);

	if (idx < sc->spad_count1)
		off = sc->spad_off1 + idx * 4;
	else
		off = sc->spad_off2 + (idx - sc->spad_count1) * 4;
	bus_write_4(sc->conf_res, off, val);
	return (0);
}

static void
ntb_plx_spad_clear(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	int i;

	for (i = 0; i < sc->spad_count1 + sc->spad_count2; i++)
		ntb_plx_spad_write(dev, i, 0);
}

static int
ntb_plx_spad_read(device_t dev, unsigned int idx, uint32_t *val)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	u_int off;

	if (idx >= sc->spad_count1 + sc->spad_count2)
		return (EINVAL);

	if (idx < sc->spad_count1)
		off = sc->spad_off1 + idx * 4;
	else
		off = sc->spad_off2 + (idx - sc->spad_count1) * 4;
	*val = bus_read_4(sc->conf_res, off);
	return (0);
}

static int
ntb_plx_peer_spad_write(device_t dev, unsigned int idx, uint32_t val)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	u_int off;

	if (idx >= sc->spad_count1 + sc->spad_count2)
		return (EINVAL);

	if (idx < sc->spad_count1)
		off = sc->spad_offp1 + idx * 4;
	else
		off = sc->spad_offp2 + (idx - sc->spad_count1) * 4;
	if (sc->b2b_mw >= 0)
		bus_write_4(sc->mw_info[sc->b2b_mw].mw_res, off, val);
	else
		bus_write_4(sc->conf_res, off, val);
	return (0);
}

static int
ntb_plx_peer_spad_read(device_t dev, unsigned int idx, uint32_t *val)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	u_int off;

	if (idx >= sc->spad_count1 + sc->spad_count2)
		return (EINVAL);

	if (idx < sc->spad_count1)
		off = sc->spad_offp1 + idx * 4;
	else
		off = sc->spad_offp2 + (idx - sc->spad_count1) * 4;
	if (sc->b2b_mw >= 0)
		*val = bus_read_4(sc->mw_info[sc->b2b_mw].mw_res, off);
	else
		*val = bus_read_4(sc->conf_res, off);
	return (0);
}

static uint64_t
ntb_plx_db_valid_mask(device_t dev)
{

	return ((1LL << PLX_NUM_DB) - 1);
}

static int
ntb_plx_db_vector_count(device_t dev)
{

	return (1);
}

static uint64_t
ntb_plx_db_vector_mask(device_t dev, uint32_t vector)
{

	if (vector > 0)
		return (0);
	return ((1LL << PLX_NUM_DB) - 1);
}

static void
ntb_plx_db_clear(device_t dev, uint64_t bits)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	NTX_WRITE(sc, sc->link ? 0xc60 : 0xc50, bits);
}

static void
ntb_plx_db_clear_mask(device_t dev, uint64_t bits)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	NTX_WRITE(sc, sc->link ? 0xc68 : 0xc58, bits);
}

static uint64_t
ntb_plx_db_read(device_t dev)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	return (NTX_READ(sc, sc->link ? 0xc5c : 0xc4c));
}

static void
ntb_plx_db_set_mask(device_t dev, uint64_t bits)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	NTX_WRITE(sc, sc->link ? 0xc64 : 0xc54, bits);
}

static int
ntb_plx_peer_db_addr(device_t dev, bus_addr_t *db_addr, vm_size_t *db_size)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);
	struct ntb_plx_mw_info *mw;

	KASSERT((db_addr != NULL && db_size != NULL), ("must be non-NULL"));

	if (sc->b2b_mw >= 0) {
		mw = &sc->mw_info[sc->b2b_mw];
		*db_addr = (uint64_t)mw->mw_pbase + PLX_NTX_BASE(sc) + 0xc4c;
	} else {
		*db_addr = rman_get_start(sc->conf_res) + PLX_NTX_BASE(sc);
		*db_addr += sc->link ? 0xc4c : 0xc5c;
	}
	*db_size = 4;
	return (0);
}

static void
ntb_plx_peer_db_set(device_t dev, uint64_t bit)
{
	struct ntb_plx_softc *sc = device_get_softc(dev);

	if (sc->b2b_mw >= 0)
		BNTX_WRITE(sc, 0xc4c, bit);
	else
		NTX_WRITE(sc, sc->link ? 0xc4c : 0xc5c, bit);
}

static device_method_t ntb_plx_methods[] = {
	/* Device interface */
	DEVMETHOD(device_probe,		ntb_plx_probe),
	DEVMETHOD(device_attach,	ntb_plx_attach),
	DEVMETHOD(device_detach,	ntb_plx_detach),
	/* Bus interface */
	DEVMETHOD(bus_child_location_str, ntb_child_location_str),
	DEVMETHOD(bus_print_child,	ntb_print_child),
	/* NTB interface */
	DEVMETHOD(ntb_link_is_up,	ntb_plx_link_is_up),
	DEVMETHOD(ntb_link_enable,	ntb_plx_link_enable),
	DEVMETHOD(ntb_link_disable,	ntb_plx_link_disable),
	DEVMETHOD(ntb_link_enabled,	ntb_plx_link_enabled),
	DEVMETHOD(ntb_mw_count,		ntb_plx_mw_count),
	DEVMETHOD(ntb_mw_get_range,	ntb_plx_mw_get_range),
	DEVMETHOD(ntb_mw_set_trans,	ntb_plx_mw_set_trans),
	DEVMETHOD(ntb_mw_clear_trans,	ntb_plx_mw_clear_trans),
	DEVMETHOD(ntb_mw_get_wc,	ntb_plx_mw_get_wc),
	DEVMETHOD(ntb_mw_set_wc,	ntb_plx_mw_set_wc),
	DEVMETHOD(ntb_spad_count,	ntb_plx_spad_count),
	DEVMETHOD(ntb_spad_clear,	ntb_plx_spad_clear),
	DEVMETHOD(ntb_spad_write,	ntb_plx_spad_write),
	DEVMETHOD(ntb_spad_read,	ntb_plx_spad_read),
	DEVMETHOD(ntb_peer_spad_write,	ntb_plx_peer_spad_write),
	DEVMETHOD(ntb_peer_spad_read,	ntb_plx_peer_spad_read),
	DEVMETHOD(ntb_db_valid_mask,	ntb_plx_db_valid_mask),
	DEVMETHOD(ntb_db_vector_count,	ntb_plx_db_vector_count),
	DEVMETHOD(ntb_db_vector_mask,	ntb_plx_db_vector_mask),
	DEVMETHOD(ntb_db_clear,		ntb_plx_db_clear),
	DEVMETHOD(ntb_db_clear_mask,	ntb_plx_db_clear_mask),
	DEVMETHOD(ntb_db_read,		ntb_plx_db_read),
	DEVMETHOD(ntb_db_set_mask,	ntb_plx_db_set_mask),
	DEVMETHOD(ntb_peer_db_addr,	ntb_plx_peer_db_addr),
	DEVMETHOD(ntb_peer_db_set,	ntb_plx_peer_db_set),
	DEVMETHOD_END
};

static DEFINE_CLASS_0(ntb_hw, ntb_plx_driver, ntb_plx_methods,
    sizeof(struct ntb_plx_softc));
DRIVER_MODULE(ntb_hw_plx, pci, ntb_plx_driver, ntb_hw_devclass, NULL, NULL);
MODULE_DEPEND(ntb_hw_plx, ntb, 1, 1, 1);
MODULE_VERSION(ntb_hw_plx, 1);