/*
* refclock_tt560 - clock driver for the TrueTime 560 IRIG-B decoder
*/
#ifdef HAVE_CONFIG_H
#include <config.h>
#endif
#if defined(REFCLOCK) && defined(CLOCK_TT560)
#include "ntpd.h"
#include "ntp_io.h"
#include "ntp_refclock.h"
#include "ntp_unixtime.h"
#include "sys/tt560_api.h"
#include "ntp_stdlib.h"
#include <stdio.h>
#include <ctype.h>
/*
* This driver supports the TrueTime 560 IRIG-B decoder for the PCI bus.
*/
/*
* TT560 interface definitions
*/
#define DEVICE "/dev/tt560%d" /* device name and unit */
#define PRECISION (-20) /* precision assumed (1 us) */
#define REFID "IRIG" /* reference ID */
#define DESCRIPTION "TrueTime 560 IRIG-B PCI Decoder"
/*
* Unit control structure
*/
struct tt560unit {
tt_mem_space_t *tt_mem; /* mapped address of PCI board */
time_freeze_reg_t tt560rawt; /* data returned from PCI board */
};
typedef union byteswap_u
{
unsigned int long_word;
unsigned char byte[4];
} byteswap_t;
/*
* Function prototypes
*/
static int tt560_start (int, struct peer *);
static void tt560_shutdown (int, struct peer *);
static void tt560_poll (int unit, struct peer *);
/*
* Transfer vector
*/
struct refclock refclock_tt560 = {
tt560_start, /* clock_start */
tt560_shutdown, /* clock_shutdown */
tt560_poll, /* clock_poll */
noentry, /* clock_control (not used) */
noentry, /* clock_init (not used) */
noentry, /* clock_buginfo (not used) */
NOFLAGS /* clock_flags (not used) */
};
/*
* tt560_start - open the TT560 device and initialize data for processing
*/
static int
tt560_start(
int unit,
struct peer *peer
)
{
register struct tt560unit *up;
struct refclockproc *pp;
char device[20];
int fd;
caddr_t membase;
/*
* Open TT560 device
*/
snprintf(device, sizeof(device), DEVICE, unit);
fd = open(device, O_RDWR);
if (fd == -1) {
msyslog(LOG_ERR, "tt560_start: open of %s: %m", device);
return (0);
}
/*
* Map the device registers into user space.
*/
membase = mmap ((caddr_t) 0, TTIME_MEMORY_SIZE,
PROT_READ | PROT_WRITE,
MAP_SHARED, fd, (off_t)0);
if (membase == (caddr_t) -1) {
msyslog(LOG_ERR, "tt560_start: mapping of %s: %m", device);
(void) close(fd);
return (0);
}
/*
* Allocate and initialize unit structure
*/
if (!(up = (struct tt560unit *) emalloc(sizeof(struct tt560unit)))) {
(void) close(fd);
return (0);
}
memset((char *)up, 0, sizeof(struct tt560unit));
up->tt_mem = (tt_mem_space_t *)membase;
pp = peer->procptr;
pp->io.clock_recv = noentry;
pp->io.srcclock = (caddr_t)peer;
pp->io.datalen = 0;
pp->io.fd = fd;
pp->unitptr = (caddr_t)up;
/*
* Initialize miscellaneous peer variables
*/
peer->precision = PRECISION;
pp->clockdesc = DESCRIPTION;
memcpy((char *)&pp->refid, REFID, 4);
return (1);
}
/*
* tt560_shutdown - shut down the clock
*/
static void
tt560_shutdown(
int unit,
struct peer *peer
)
{
register struct tt560unit *up;
struct refclockproc *pp;
pp = peer->procptr;
up = (struct tt560unit *)pp->unitptr;
io_closeclock(&pp->io);
free(up);
}
/*
* tt560_poll - called by the transmit procedure
*/
static void
tt560_poll(
int unit,
struct peer *peer
)
{
register struct tt560unit *up;
struct refclockproc *pp;
time_freeze_reg_t *tp;
tt_mem_space_t *mp;
int i;
unsigned int *p_time_t, *tt_mem_t;
/*
* This is the main routine. It snatches the time from the TT560
* board and tacks on a local timestamp.
*/
pp = peer->procptr;
up = (struct tt560unit *)pp->unitptr;
mp = up->tt_mem;
tp = &up->tt560rawt;
p_time_t = (unsigned int *)tp;
tt_mem_t = (unsigned int *)&mp->time_freeze_reg;
*tt_mem_t = 0; /* update the time freeze register */
/* and copy time stamp to memory */
for (i=0; i < TIME_FREEZE_REG_LEN; i++) {
*p_time_t = byte_swap(*tt_mem_t);
p_time_t++;
tt_mem_t++;
}
get_systime(&pp->lastrec);
pp->polls++;
/*
* We get down to business, check the timecode format and decode
* its contents. If the timecode has invalid length or is not in
* proper format, we declare bad format and exit. Note: we
* can't use the sec/usec conversion produced by the driver,
* since the year may be suspect. All format error checking is
* done by the snprintf() and sscanf() routines.
*/
snprintf(pp->a_lastcode, sizeof(pp->a_lastcode),
"%1x%1x%1x %1x%1x:%1x%1x:%1x%1x.%1x%1x%1x%1x%1x%1x %1x",
tp->hun_day, tp->tens_day, tp->unit_day,
tp->tens_hour, tp->unit_hour,
tp->tens_min, tp->unit_min,
tp->tens_sec, tp->unit_sec,
tp->hun_ms, tp->tens_ms, tp->unit_ms,
tp->hun_us, tp->tens_us, tp->unit_us,
tp->status);
pp->lencode = strlen(pp->a_lastcode);
#ifdef DEBUG
if (debug)
printf("tt560: time %s timecode %d %s\n",
ulfptoa(&pp->lastrec, 6), pp->lencode,
pp->a_lastcode);
#endif
if (sscanf(pp->a_lastcode, "%3d %2d:%2d:%2d.%6ld",
&pp->day, &pp->hour, &pp->minute, &pp->second, &pp->usec)
!= 5) {
refclock_report(peer, CEVNT_BADTIME);
return;
}
if ((tp->status & 0x6) != 0x6)
pp->leap = LEAP_NOTINSYNC;
else
pp->leap = LEAP_NOWARNING;
if (!refclock_process(pp)) {
refclock_report(peer, CEVNT_BADTIME);
return;
}
if (pp->coderecv == pp->codeproc) {
refclock_report(peer, CEVNT_TIMEOUT);
return;
}
record_clock_stats(&peer->srcadr, pp->a_lastcode);
refclock_receive(peer);
}
/******************************************************************
*
* byte_swap
*
* Inputs: 32 bit integer
*
* Output: byte swapped 32 bit integer.
*
* This routine is used to compensate for the byte alignment
* differences between big-endian and little-endian integers.
*
******************************************************************/
static unsigned int
byte_swap(unsigned int input_num)
{
byteswap_t byte_swap;
unsigned char temp;
byte_swap.long_word = input_num;
temp = byte_swap.byte[3];
byte_swap.byte[3] = byte_swap.byte[0];
byte_swap.byte[0] = temp;
temp = byte_swap.byte[2];
byte_swap.byte[2] = byte_swap.byte[1];
byte_swap.byte[1] = temp;
return (byte_swap.long_word);
}
#else
int refclock_tt560_bs;
#endif /* REFCLOCK */