/*-
* Copyright (c) 2012-2015 LSI Corp.
* Copyright (c) 2013-2016 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
/*
* Copyright (c) 2000-2015 LSI Corporation.
* Copyright (c) 2013-2016 Avago Technologies
* All rights reserved.
*
*
* Name: mpi2_ioc.h
* Title: MPI IOC, Port, Event, FW Download, and FW Upload messages
* Creation Date: October 11, 2006
*
* mpi2_ioc.h Version: 02.00.32
*
* NOTE: Names (typedefs, defines, etc.) beginning with an MPI25 or Mpi25
* prefix are for use only on MPI v2.5 products, and must not be used
* with MPI v2.0 products. Unless otherwise noted, names beginning with
* MPI2 or Mpi2 are for use with both MPI v2.0 and MPI v2.5 products.
*
* Version History
* ---------------
*
* Date Version Description
* -------- -------- ------------------------------------------------------
* 04-30-07 02.00.00 Corresponds to Fusion-MPT MPI Specification Rev A.
* 06-04-07 02.00.01 In IOCFacts Reply structure, renamed MaxDevices to
* MaxTargets.
* Added TotalImageSize field to FWDownload Request.
* Added reserved words to FWUpload Request.
* 06-26-07 02.00.02 Added IR Configuration Change List Event.
* 08-31-07 02.00.03 Removed SystemReplyQueueDepth field from the IOCInit
* request and replaced it with
* ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
* Replaced the MinReplyQueueDepth field of the IOCFacts
* reply with MaxReplyDescriptorPostQueueDepth.
* Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
* depth for the Reply Descriptor Post Queue.
* Added SASAddress field to Initiator Device Table
* Overflow Event data.
* 10-31-07 02.00.04 Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
* for SAS Initiator Device Status Change Event data.
* Modified Reason Code defines for SAS Topology Change
* List Event data, including adding a bit for PHY Vacant
* status, and adding a mask for the Reason Code.
* Added define for
* MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
* Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
* 12-18-07 02.00.05 Added Boot Status defines for the IOCExceptions field of
* the IOCFacts Reply.
* Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
* Moved MPI2_VERSION_UNION to mpi2.h.
* Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
* instead of enables, and added SASBroadcastPrimitiveMasks
* field.
* Added Log Entry Added Event and related structure.
* 02-29-08 02.00.06 Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
* Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
* Added MaxVolumes and MaxPersistentEntries fields to
* IOCFacts reply.
* Added ProtocalFlags and IOCCapabilities fields to
* MPI2_FW_IMAGE_HEADER.
* Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
* 03-03-08 02.00.07 Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
* a U16 (from a U32).
* Removed extra 's' from EventMasks name.
* 06-27-08 02.00.08 Fixed an offset in a comment.
* 10-02-08 02.00.09 Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
* Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
* renamed MinReplyFrameSize to ReplyFrameSize.
* Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
* Added two new RAIDOperation values for Integrated RAID
* Operations Status Event data.
* Added four new IR Configuration Change List Event data
* ReasonCode values.
* Added two new ReasonCode defines for SAS Device Status
* Change Event data.
* Added three new DiscoveryStatus bits for the SAS
* Discovery event data.
* Added Multiplexing Status Change bit to the PhyStatus
* field of the SAS Topology Change List event data.
* Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
* BootFlags are now product-specific.
* Added defines for the indivdual signature bytes
* for MPI2_INIT_IMAGE_FOOTER.
* 01-19-09 02.00.10 Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
* Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
* define.
* Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
* define.
* Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
* 05-06-09 02.00.11 Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
* Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
* Added two new reason codes for SAS Device Status Change
* Event.
* Added new event: SAS PHY Counter.
* 07-30-09 02.00.12 Added GPIO Interrupt event define and structure.
* Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
* Added new product id family for 2208.
* 10-28-09 02.00.13 Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
* Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
* Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
* Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
* Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
* Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
* Added Host Based Discovery Phy Event data.
* Added defines for ProductID Product field
* (MPI2_FW_HEADER_PID_).
* Modified values for SAS ProductID Family
* (MPI2_FW_HEADER_PID_FAMILY_).
* 02-10-10 02.00.14 Added SAS Quiesce Event structure and defines.
* Added PowerManagementControl Request structures and
* defines.
* 05-12-10 02.00.15 Marked Task Set Full Event as obsolete.
* Added MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY define.
* 11-10-10 02.00.16 Added MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC.
* 02-23-11 02.00.17 Added SAS NOTIFY Primitive event, and added
* SASNotifyPrimitiveMasks field to
* MPI2_EVENT_NOTIFICATION_REQUEST.
* Added Temperature Threshold Event.
* Added Host Message Event.
* Added Send Host Message request and reply.
* 05-25-11 02.00.18 For Extended Image Header, added
* MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC and
* MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC defines.
* Deprecated MPI2_EXT_IMAGE_TYPE_MAX define.
* 08-24-11 02.00.19 Added PhysicalPort field to
* MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE structure.
* Marked MPI2_PM_CONTROL_FEATURE_PCIE_LINK as obsolete.
* 11-18-11 02.00.20 Incorporating additions for MPI v2.5.
* 03-29-12 02.00.21 Added a product specific range to event values.
* 07-26-12 02.00.22 Added MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE.
* Added ElapsedSeconds field to
* MPI2_EVENT_DATA_IR_OPERATION_STATUS.
* 08-19-13 02.00.23 For IOCInit, added MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE
* and MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY.
* Added MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE.
* Added MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY.
* Added Encrypted Hash Extended Image.
* 12-05-13 02.00.24 Added MPI25_HASH_IMAGE_TYPE_BIOS.
* 11-18-14 02.00.25 Updated copyright information.
* 03-16-15 02.00.26 Updated for MPI v2.6.
* Added MPI2_EVENT_ACTIVE_CABLE_EXCEPTION and
* MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT.
* Added MPI2_EVENT_PCIE_LINK_COUNTER and
* MPI26_EVENT_DATA_PCIE_LINK_COUNTER.
* Added MPI26_CTRL_OP_SHUTDOWN.
* Added MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG
* Added MPI26_FW_HEADER_PID_FAMILY_3324_SAS and
* MPI26_FW_HEADER_PID_FAMILY_3516_SAS.
* 08-25-15 02.00.27 Added IC ARCH Class based signature defines.
* Added MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED event.
* Added ConigurationFlags field to IOCInit message to
* support NVMe SGL format control.
* Added PCIe SRIOV support.
* 02-17-16 02.00.28 Added SAS 4 22.5 gbs speed support.
* Added PCIe 4 16.0 GT/sec speec support.
* Removed AHCI support.
* Removed SOP support.
* 07-01-16 02.00.29 Added Archclass for 4008 product.
* Added IOCException MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED
* 08-23-16 02.00.30 Added new defines for the ImageType field of FWDownload
* Request Message.
* Added new defines for the ImageType field of FWUpload
* Request Message.
* Added new values for the RegionType field in the Layout
* Data sections of the FLASH Layout Extended Image Data.
* Added new defines for the ReasonCode field of
* Active Cable Exception Event.
* Added MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE and
* MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE.
* 11-23-16 02.00.31 Added MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR and
* MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR.
* 02-02-17 02.00.32 Added MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP.
* Added MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT and related
* defines for the ReasonCode field.
* --------------------------------------------------------------------------
*/
#ifndef MPI2_IOC_H
#define MPI2_IOC_H
/*****************************************************************************
*
* IOC Messages
*
*****************************************************************************/
/****************************************************************************
* IOCInit message
****************************************************************************/
/* IOCInit Request message */
typedef struct _MPI2_IOC_INIT_REQUEST
{
U8 WhoInit; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 MsgVersion; /* 0x0C */
U16 HeaderVersion; /* 0x0E */
U32 Reserved5; /* 0x10 */
U16 ConfigurationFlags; /* 0x14 */
U8 HostPageSize; /* 0x16 */
U8 HostMSIxVectors; /* 0x17 */
U16 Reserved8; /* 0x18 */
U16 SystemRequestFrameSize; /* 0x1A */
U16 ReplyDescriptorPostQueueDepth; /* 0x1C */
U16 ReplyFreeQueueDepth; /* 0x1E */
U32 SenseBufferAddressHigh; /* 0x20 */
U32 SystemReplyAddressHigh; /* 0x24 */
U64 SystemRequestFrameBaseAddress; /* 0x28 */
U64 ReplyDescriptorPostQueueAddress;/* 0x30 */
U64 ReplyFreeQueueAddress; /* 0x38 */
U64 TimeStamp; /* 0x40 */
} MPI2_IOC_INIT_REQUEST, MPI2_POINTER PTR_MPI2_IOC_INIT_REQUEST,
Mpi2IOCInitRequest_t, MPI2_POINTER pMpi2IOCInitRequest_t;
/* WhoInit values */
#define MPI2_WHOINIT_NOT_INITIALIZED (0x00)
#define MPI2_WHOINIT_SYSTEM_BIOS (0x01)
#define MPI2_WHOINIT_ROM_BIOS (0x02)
#define MPI2_WHOINIT_PCI_PEER (0x03)
#define MPI2_WHOINIT_HOST_DRIVER (0x04)
#define MPI2_WHOINIT_MANUFACTURER (0x05)
/* MsgFlags */
#define MPI2_IOCINIT_MSGFLAG_RDPQ_ARRAY_MODE (0x01)
/* MsgVersion */
#define MPI2_IOCINIT_MSGVERSION_MAJOR_MASK (0xFF00)
#define MPI2_IOCINIT_MSGVERSION_MAJOR_SHIFT (8)
#define MPI2_IOCINIT_MSGVERSION_MINOR_MASK (0x00FF)
#define MPI2_IOCINIT_MSGVERSION_MINOR_SHIFT (0)
/* HeaderVersion */
#define MPI2_IOCINIT_HDRVERSION_UNIT_MASK (0xFF00)
#define MPI2_IOCINIT_HDRVERSION_UNIT_SHIFT (8)
#define MPI2_IOCINIT_HDRVERSION_DEV_MASK (0x00FF)
#define MPI2_IOCINIT_HDRVERSION_DEV_SHIFT (0)
/* ConfigurationFlags */
#define MPI26_IOCINIT_CFGFLAGS_NVME_SGL_FORMAT (0x0001)
/* minimum depth for a Reply Descriptor Post Queue */
#define MPI2_RDPQ_DEPTH_MIN (16)
/* Reply Descriptor Post Queue Array Entry */
typedef struct _MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY
{
U64 RDPQBaseAddress; /* 0x00 */
U32 Reserved1; /* 0x08 */
U32 Reserved2; /* 0x0C */
} MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
MPI2_POINTER PTR_MPI2_IOC_INIT_RDPQ_ARRAY_ENTRY,
Mpi2IOCInitRDPQArrayEntry, MPI2_POINTER pMpi2IOCInitRDPQArrayEntry;
/* IOCInit Reply message */
typedef struct _MPI2_IOC_INIT_REPLY
{
U8 WhoInit; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_IOC_INIT_REPLY, MPI2_POINTER PTR_MPI2_IOC_INIT_REPLY,
Mpi2IOCInitReply_t, MPI2_POINTER pMpi2IOCInitReply_t;
/****************************************************************************
* IOCFacts message
****************************************************************************/
/* IOCFacts Request message */
typedef struct _MPI2_IOC_FACTS_REQUEST
{
U16 Reserved1; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
} MPI2_IOC_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_IOC_FACTS_REQUEST,
Mpi2IOCFactsRequest_t, MPI2_POINTER pMpi2IOCFactsRequest_t;
/* IOCFacts Reply message */
typedef struct _MPI2_IOC_FACTS_REPLY
{
U16 MsgVersion; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 HeaderVersion; /* 0x04 */
U8 IOCNumber; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved1; /* 0x0A */
U16 IOCExceptions; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U8 MaxChainDepth; /* 0x14 */
U8 WhoInit; /* 0x15 */
U8 NumberOfPorts; /* 0x16 */
U8 MaxMSIxVectors; /* 0x17 */
U16 RequestCredit; /* 0x18 */
U16 ProductID; /* 0x1A */
U32 IOCCapabilities; /* 0x1C */
MPI2_VERSION_UNION FWVersion; /* 0x20 */
U16 IOCRequestFrameSize; /* 0x24 */
U16 IOCMaxChainSegmentSize; /* 0x26 */ /* MPI 2.5 only; Reserved in MPI 2.0 */
U16 MaxInitiators; /* 0x28 */
U16 MaxTargets; /* 0x2A */
U16 MaxSasExpanders; /* 0x2C */
U16 MaxEnclosures; /* 0x2E */
U16 ProtocolFlags; /* 0x30 */
U16 HighPriorityCredit; /* 0x32 */
U16 MaxReplyDescriptorPostQueueDepth; /* 0x34 */
U8 ReplyFrameSize; /* 0x36 */
U8 MaxVolumes; /* 0x37 */
U16 MaxDevHandle; /* 0x38 */
U16 MaxPersistentEntries; /* 0x3A */
U16 MinDevHandle; /* 0x3C */
U8 CurrentHostPageSize; /* 0x3E */
U8 Reserved4; /* 0x3F */
U8 SGEModifierMask; /* 0x40 */
U8 SGEModifierValue; /* 0x41 */
U8 SGEModifierShift; /* 0x42 */
U8 Reserved5; /* 0x43 */
} MPI2_IOC_FACTS_REPLY, MPI2_POINTER PTR_MPI2_IOC_FACTS_REPLY,
Mpi2IOCFactsReply_t, MPI2_POINTER pMpi2IOCFactsReply_t;
/* MsgVersion */
#define MPI2_IOCFACTS_MSGVERSION_MAJOR_MASK (0xFF00)
#define MPI2_IOCFACTS_MSGVERSION_MAJOR_SHIFT (8)
#define MPI2_IOCFACTS_MSGVERSION_MINOR_MASK (0x00FF)
#define MPI2_IOCFACTS_MSGVERSION_MINOR_SHIFT (0)
/* HeaderVersion */
#define MPI2_IOCFACTS_HDRVERSION_UNIT_MASK (0xFF00)
#define MPI2_IOCFACTS_HDRVERSION_UNIT_SHIFT (8)
#define MPI2_IOCFACTS_HDRVERSION_DEV_MASK (0x00FF)
#define MPI2_IOCFACTS_HDRVERSION_DEV_SHIFT (0)
/* IOCExceptions */
#define MPI2_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0400)
#define MPI2_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0200)
#define MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX (0x0100)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x00E0)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_GOOD (0x0000)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_BACKUP (0x0020)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_RESTORED (0x0040)
#define MPI2_IOCFACTS_EXCEPT_BOOTSTAT_CORRUPT_BACKUP (0x0060)
#define MPI2_IOCFACTS_EXCEPT_METADATA_UNSUPPORTED (0x0010)
#define MPI2_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0008)
#define MPI2_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0004)
#define MPI2_IOCFACTS_EXCEPT_RAID_CONFIG_INVALID (0x0002)
#define MPI2_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0001)
/* defines for WhoInit field are after the IOCInit Request */
/* ProductID field uses MPI2_FW_HEADER_PID_ */
/* IOCCapabilities */
#define MPI26_IOCFACTS_CAPABILITY_PCIE_SRIOV (0x00100000)
#define MPI26_IOCFACTS_CAPABILITY_ATOMIC_REQ (0x00080000)
#define MPI2_IOCFACTS_CAPABILITY_RDPQ_ARRAY_CAPABLE (0x00040000)
#define MPI25_IOCFACTS_CAPABILITY_FAST_PATH_CAPABLE (0x00020000)
#define MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY (0x00010000)
#define MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX (0x00008000)
#define MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR (0x00004000)
#define MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY (0x00002000)
#define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID (0x00001000)
#define MPI2_IOCFACTS_CAPABILITY_TLR (0x00000800)
#define MPI2_IOCFACTS_CAPABILITY_MULTICAST (0x00000100)
#define MPI2_IOCFACTS_CAPABILITY_BIDIRECTIONAL_TARGET (0x00000080)
#define MPI2_IOCFACTS_CAPABILITY_EEDP (0x00000040)
#define MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER (0x00000020)
#define MPI2_IOCFACTS_CAPABILITY_SNAPSHOT_BUFFER (0x00000010)
#define MPI2_IOCFACTS_CAPABILITY_DIAG_TRACE_BUFFER (0x00000008)
#define MPI2_IOCFACTS_CAPABILITY_TASK_SET_FULL_HANDLING (0x00000004)
/* ProtocolFlags */
#define MPI2_IOCFACTS_PROTOCOL_NVME_DEVICES (0x0008) /* MPI v2.6 and later */
#define MPI2_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
#define MPI2_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
/****************************************************************************
* PortFacts message
****************************************************************************/
/* PortFacts Request message */
typedef struct _MPI2_PORT_FACTS_REQUEST
{
U16 Reserved1; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 PortNumber; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
} MPI2_PORT_FACTS_REQUEST, MPI2_POINTER PTR_MPI2_PORT_FACTS_REQUEST,
Mpi2PortFactsRequest_t, MPI2_POINTER pMpi2PortFactsRequest_t;
/* PortFacts Reply message */
typedef struct _MPI2_PORT_FACTS_REPLY
{
U16 Reserved1; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 PortNumber; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U16 Reserved4; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U8 Reserved5; /* 0x14 */
U8 PortType; /* 0x15 */
U16 Reserved6; /* 0x16 */
U16 MaxPostedCmdBuffers; /* 0x18 */
U16 Reserved7; /* 0x1A */
} MPI2_PORT_FACTS_REPLY, MPI2_POINTER PTR_MPI2_PORT_FACTS_REPLY,
Mpi2PortFactsReply_t, MPI2_POINTER pMpi2PortFactsReply_t;
/* PortType values */
#define MPI2_PORTFACTS_PORTTYPE_INACTIVE (0x00)
#define MPI2_PORTFACTS_PORTTYPE_FC (0x10)
#define MPI2_PORTFACTS_PORTTYPE_ISCSI (0x20)
#define MPI2_PORTFACTS_PORTTYPE_SAS_PHYSICAL (0x30)
#define MPI2_PORTFACTS_PORTTYPE_SAS_VIRTUAL (0x31)
#define MPI2_PORTFACTS_PORTTYPE_TRI_MODE (0x40) /* MPI v2.6 and later */
/****************************************************************************
* PortEnable message
****************************************************************************/
/* PortEnable Request message */
typedef struct _MPI2_PORT_ENABLE_REQUEST
{
U16 Reserved1; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U8 Reserved2; /* 0x04 */
U8 PortFlags; /* 0x05 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
} MPI2_PORT_ENABLE_REQUEST, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REQUEST,
Mpi2PortEnableRequest_t, MPI2_POINTER pMpi2PortEnableRequest_t;
/* PortEnable Reply message */
typedef struct _MPI2_PORT_ENABLE_REPLY
{
U16 Reserved1; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U8 Reserved2; /* 0x04 */
U8 PortFlags; /* 0x05 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_PORT_ENABLE_REPLY, MPI2_POINTER PTR_MPI2_PORT_ENABLE_REPLY,
Mpi2PortEnableReply_t, MPI2_POINTER pMpi2PortEnableReply_t;
/****************************************************************************
* EventNotification message
****************************************************************************/
/* EventNotification Request message */
#define MPI2_EVENT_NOTIFY_EVENTMASK_WORDS (4)
typedef struct _MPI2_EVENT_NOTIFICATION_REQUEST
{
U16 Reserved1; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 Reserved5; /* 0x0C */
U32 Reserved6; /* 0x10 */
U32 EventMasks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];/* 0x14 */
U16 SASBroadcastPrimitiveMasks; /* 0x24 */
U16 SASNotifyPrimitiveMasks; /* 0x26 */
U32 Reserved8; /* 0x28 */
} MPI2_EVENT_NOTIFICATION_REQUEST,
MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REQUEST,
Mpi2EventNotificationRequest_t, MPI2_POINTER pMpi2EventNotificationRequest_t;
/* EventNotification Reply message */
typedef struct _MPI2_EVENT_NOTIFICATION_REPLY
{
U16 EventDataLength; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved1; /* 0x04 */
U8 AckRequired; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved2; /* 0x0A */
U16 Reserved3; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U16 Event; /* 0x14 */
U16 Reserved4; /* 0x16 */
U32 EventContext; /* 0x18 */
U32 EventData[1]; /* 0x1C */
} MPI2_EVENT_NOTIFICATION_REPLY, MPI2_POINTER PTR_MPI2_EVENT_NOTIFICATION_REPLY,
Mpi2EventNotificationReply_t, MPI2_POINTER pMpi2EventNotificationReply_t;
/* AckRequired */
#define MPI2_EVENT_NOTIFICATION_ACK_NOT_REQUIRED (0x00)
#define MPI2_EVENT_NOTIFICATION_ACK_REQUIRED (0x01)
/* Event */
#define MPI2_EVENT_LOG_DATA (0x0001)
#define MPI2_EVENT_STATE_CHANGE (0x0002)
#define MPI2_EVENT_HARD_RESET_RECEIVED (0x0005)
#define MPI2_EVENT_EVENT_CHANGE (0x000A)
#define MPI2_EVENT_TASK_SET_FULL (0x000E) /* obsolete */
#define MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE (0x000F)
#define MPI2_EVENT_IR_OPERATION_STATUS (0x0014)
#define MPI2_EVENT_SAS_DISCOVERY (0x0016)
#define MPI2_EVENT_SAS_BROADCAST_PRIMITIVE (0x0017)
#define MPI2_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x0018)
#define MPI2_EVENT_SAS_INIT_TABLE_OVERFLOW (0x0019)
#define MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x001C)
#define MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE (0x001D)
#define MPI2_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x001D) /* MPI v2.6 and later */
#define MPI2_EVENT_IR_VOLUME (0x001E)
#define MPI2_EVENT_IR_PHYSICAL_DISK (0x001F)
#define MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST (0x0020)
#define MPI2_EVENT_LOG_ENTRY_ADDED (0x0021)
#define MPI2_EVENT_SAS_PHY_COUNTER (0x0022)
#define MPI2_EVENT_GPIO_INTERRUPT (0x0023)
#define MPI2_EVENT_HOST_BASED_DISCOVERY_PHY (0x0024)
#define MPI2_EVENT_SAS_QUIESCE (0x0025)
#define MPI2_EVENT_SAS_NOTIFY_PRIMITIVE (0x0026)
#define MPI2_EVENT_TEMP_THRESHOLD (0x0027)
#define MPI2_EVENT_HOST_MESSAGE (0x0028)
#define MPI2_EVENT_POWER_PERFORMANCE_CHANGE (0x0029)
#define MPI2_EVENT_PCIE_DEVICE_STATUS_CHANGE (0x0030) /* MPI v2.6 and later */
#define MPI2_EVENT_PCIE_ENUMERATION (0x0031) /* MPI v2.6 and later */
#define MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x0032) /* MPI v2.6 and later */
#define MPI2_EVENT_PCIE_LINK_COUNTER (0x0033) /* MPI v2.6 and later */
#define MPI2_EVENT_ACTIVE_CABLE_EXCEPTION (0x0034) /* MPI v2.6 and later */
#define MPI2_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x0035) /* MPI v2.5 and later */
#define MPI2_EVENT_MIN_PRODUCT_SPECIFIC (0x006E)
#define MPI2_EVENT_MAX_PRODUCT_SPECIFIC (0x007F)
/* Log Entry Added Event data */
/* the following structure matches MPI2_LOG_0_ENTRY in mpi2_cnfg.h */
#define MPI2_EVENT_DATA_LOG_DATA_LENGTH (0x1C)
typedef struct _MPI2_EVENT_DATA_LOG_ENTRY_ADDED
{
U64 TimeStamp; /* 0x00 */
U32 Reserved1; /* 0x08 */
U16 LogSequence; /* 0x0C */
U16 LogEntryQualifier; /* 0x0E */
U8 VP_ID; /* 0x10 */
U8 VF_ID; /* 0x11 */
U16 Reserved2; /* 0x12 */
U8 LogData[MPI2_EVENT_DATA_LOG_DATA_LENGTH];/* 0x14 */
} MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
MPI2_POINTER PTR_MPI2_EVENT_DATA_LOG_ENTRY_ADDED,
Mpi2EventDataLogEntryAdded_t, MPI2_POINTER pMpi2EventDataLogEntryAdded_t;
/* GPIO Interrupt Event data */
typedef struct _MPI2_EVENT_DATA_GPIO_INTERRUPT
{
U8 GPIONum; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
} MPI2_EVENT_DATA_GPIO_INTERRUPT,
MPI2_POINTER PTR_MPI2_EVENT_DATA_GPIO_INTERRUPT,
Mpi2EventDataGpioInterrupt_t, MPI2_POINTER pMpi2EventDataGpioInterrupt_t;
/* Temperature Threshold Event data */
typedef struct _MPI2_EVENT_DATA_TEMPERATURE
{
U16 Status; /* 0x00 */
U8 SensorNum; /* 0x02 */
U8 Reserved1; /* 0x03 */
U16 CurrentTemperature; /* 0x04 */
U16 Reserved2; /* 0x06 */
U32 Reserved3; /* 0x08 */
U32 Reserved4; /* 0x0C */
} MPI2_EVENT_DATA_TEMPERATURE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_TEMPERATURE,
Mpi2EventDataTemperature_t, MPI2_POINTER pMpi2EventDataTemperature_t;
/* Temperature Threshold Event data Status bits */
#define MPI2_EVENT_TEMPERATURE3_EXCEEDED (0x0008)
#define MPI2_EVENT_TEMPERATURE2_EXCEEDED (0x0004)
#define MPI2_EVENT_TEMPERATURE1_EXCEEDED (0x0002)
#define MPI2_EVENT_TEMPERATURE0_EXCEEDED (0x0001)
/* Host Message Event data */
typedef struct _MPI2_EVENT_DATA_HOST_MESSAGE
{
U8 SourceVF_ID; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U32 Reserved3; /* 0x04 */
U32 HostData[1]; /* 0x08 */
} MPI2_EVENT_DATA_HOST_MESSAGE, MPI2_POINTER PTR_MPI2_EVENT_DATA_HOST_MESSAGE,
Mpi2EventDataHostMessage_t, MPI2_POINTER pMpi2EventDataHostMessage_t;
/* Power Performance Change Event data */
typedef struct _MPI2_EVENT_DATA_POWER_PERF_CHANGE
{
U8 CurrentPowerMode; /* 0x00 */
U8 PreviousPowerMode; /* 0x01 */
U16 Reserved1; /* 0x02 */
} MPI2_EVENT_DATA_POWER_PERF_CHANGE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_POWER_PERF_CHANGE,
Mpi2EventDataPowerPerfChange_t, MPI2_POINTER pMpi2EventDataPowerPerfChange_t;
/* defines for CurrentPowerMode and PreviousPowerMode fields */
#define MPI2_EVENT_PM_INIT_MASK (0xC0)
#define MPI2_EVENT_PM_INIT_UNAVAILABLE (0x00)
#define MPI2_EVENT_PM_INIT_HOST (0x40)
#define MPI2_EVENT_PM_INIT_IO_UNIT (0x80)
#define MPI2_EVENT_PM_INIT_PCIE_DPA (0xC0)
#define MPI2_EVENT_PM_MODE_MASK (0x07)
#define MPI2_EVENT_PM_MODE_UNAVAILABLE (0x00)
#define MPI2_EVENT_PM_MODE_UNKNOWN (0x01)
#define MPI2_EVENT_PM_MODE_FULL_POWER (0x04)
#define MPI2_EVENT_PM_MODE_REDUCED_POWER (0x05)
#define MPI2_EVENT_PM_MODE_STANDBY (0x06)
/* Active Cable Exception Event data */
typedef struct _MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT
{
U32 ActiveCablePowerRequirement; /* 0x00 */
U8 ReasonCode; /* 0x04 */
U8 ReceptacleID; /* 0x05 */
U16 Reserved1; /* 0x06 */
} MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
MPI2_POINTER PTR_MPI25_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
Mpi25EventDataActiveCableExcept_t,
MPI2_POINTER pMpi25EventDataActiveCableExcept_t,
MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
MPI2_POINTER PTR_MPI26_EVENT_DATA_ACTIVE_CABLE_EXCEPT,
Mpi26EventDataActiveCableExcept_t,
MPI2_POINTER pMpi26EventDataActiveCableExcept_t;
/* MPI2.5 defines for the ReasonCode field */
#define MPI25_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
#define MPI25_EVENT_ACTIVE_CABLE_PRESENT (0x01)
#define MPI25_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
/* MPI2.6 defines for the ReasonCode field */
#define MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER (0x00)
#define MPI26_EVENT_ACTIVE_CABLE_PRESENT (0x01)
#define MPI26_EVENT_ACTIVE_CABLE_DEGRADED (0x02)
/* Hard Reset Received Event data */
typedef struct _MPI2_EVENT_DATA_HARD_RESET_RECEIVED
{
U8 Reserved1; /* 0x00 */
U8 Port; /* 0x01 */
U16 Reserved2; /* 0x02 */
} MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
MPI2_POINTER PTR_MPI2_EVENT_DATA_HARD_RESET_RECEIVED,
Mpi2EventDataHardResetReceived_t,
MPI2_POINTER pMpi2EventDataHardResetReceived_t;
/* Task Set Full Event data */
/* this event is obsolete */
typedef struct _MPI2_EVENT_DATA_TASK_SET_FULL
{
U16 DevHandle; /* 0x00 */
U16 CurrentDepth; /* 0x02 */
} MPI2_EVENT_DATA_TASK_SET_FULL, MPI2_POINTER PTR_MPI2_EVENT_DATA_TASK_SET_FULL,
Mpi2EventDataTaskSetFull_t, MPI2_POINTER pMpi2EventDataTaskSetFull_t;
/* SAS Device Status Change Event data */
typedef struct _MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE
{
U16 TaskTag; /* 0x00 */
U8 ReasonCode; /* 0x02 */
U8 PhysicalPort; /* 0x03 */
U8 ASC; /* 0x04 */
U8 ASCQ; /* 0x05 */
U16 DevHandle; /* 0x06 */
U32 Reserved2; /* 0x08 */
U64 SASAddress; /* 0x0C */
U8 LUN[8]; /* 0x14 */
} MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DEVICE_STATUS_CHANGE,
Mpi2EventDataSasDeviceStatusChange_t,
MPI2_POINTER pMpi2EventDataSasDeviceStatusChange_t;
/* SAS Device Status Change Event data ReasonCode values */
#define MPI2_EVENT_SAS_DEV_STAT_RC_SMART_DATA (0x05)
#define MPI2_EVENT_SAS_DEV_STAT_RC_UNSUPPORTED (0x07)
#define MPI2_EVENT_SAS_DEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
#define MPI2_EVENT_SAS_DEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
#define MPI2_EVENT_SAS_DEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
#define MPI2_EVENT_SAS_DEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
#define MPI2_EVENT_SAS_DEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
#define MPI2_EVENT_SAS_DEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
#define MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE (0x10)
#define MPI2_EVENT_SAS_DEV_STAT_RC_EXPANDER_REDUCED_FUNCTIONALITY (0x11)
#define MPI2_EVENT_SAS_DEV_STAT_RC_CMP_EXPANDER_REDUCED_FUNCTIONALITY (0x12)
/* Integrated RAID Operation Status Event data */
typedef struct _MPI2_EVENT_DATA_IR_OPERATION_STATUS
{
U16 VolDevHandle; /* 0x00 */
U16 Reserved1; /* 0x02 */
U8 RAIDOperation; /* 0x04 */
U8 PercentComplete; /* 0x05 */
U16 Reserved2; /* 0x06 */
U32 ElapsedSeconds; /* 0x08 */
} MPI2_EVENT_DATA_IR_OPERATION_STATUS,
MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_OPERATION_STATUS,
Mpi2EventDataIrOperationStatus_t,
MPI2_POINTER pMpi2EventDataIrOperationStatus_t;
/* Integrated RAID Operation Status Event data RAIDOperation values */
#define MPI2_EVENT_IR_RAIDOP_RESYNC (0x00)
#define MPI2_EVENT_IR_RAIDOP_ONLINE_CAP_EXPANSION (0x01)
#define MPI2_EVENT_IR_RAIDOP_CONSISTENCY_CHECK (0x02)
#define MPI2_EVENT_IR_RAIDOP_BACKGROUND_INIT (0x03)
#define MPI2_EVENT_IR_RAIDOP_MAKE_DATA_CONSISTENT (0x04)
/* Integrated RAID Volume Event data */
typedef struct _MPI2_EVENT_DATA_IR_VOLUME
{
U16 VolDevHandle; /* 0x00 */
U8 ReasonCode; /* 0x02 */
U8 Reserved1; /* 0x03 */
U32 NewValue; /* 0x04 */
U32 PreviousValue; /* 0x08 */
} MPI2_EVENT_DATA_IR_VOLUME, MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_VOLUME,
Mpi2EventDataIrVolume_t, MPI2_POINTER pMpi2EventDataIrVolume_t;
/* Integrated RAID Volume Event data ReasonCode values */
#define MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED (0x01)
#define MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED (0x02)
#define MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED (0x03)
/* Integrated RAID Physical Disk Event data */
typedef struct _MPI2_EVENT_DATA_IR_PHYSICAL_DISK
{
U16 Reserved1; /* 0x00 */
U8 ReasonCode; /* 0x02 */
U8 PhysDiskNum; /* 0x03 */
U16 PhysDiskDevHandle; /* 0x04 */
U16 Reserved2; /* 0x06 */
U16 Slot; /* 0x08 */
U16 EnclosureHandle; /* 0x0A */
U32 NewValue; /* 0x0C */
U32 PreviousValue; /* 0x10 */
} MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_PHYSICAL_DISK,
Mpi2EventDataIrPhysicalDisk_t, MPI2_POINTER pMpi2EventDataIrPhysicalDisk_t;
/* Integrated RAID Physical Disk Event data ReasonCode values */
#define MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED (0x01)
#define MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED (0x02)
#define MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED (0x03)
/* Integrated RAID Configuration Change List Event data */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check NumElements at runtime.
*/
#ifndef MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT
#define MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT (1)
#endif
typedef struct _MPI2_EVENT_IR_CONFIG_ELEMENT
{
U16 ElementFlags; /* 0x00 */
U16 VolDevHandle; /* 0x02 */
U8 ReasonCode; /* 0x04 */
U8 PhysDiskNum; /* 0x05 */
U16 PhysDiskDevHandle; /* 0x06 */
} MPI2_EVENT_IR_CONFIG_ELEMENT, MPI2_POINTER PTR_MPI2_EVENT_IR_CONFIG_ELEMENT,
Mpi2EventIrConfigElement_t, MPI2_POINTER pMpi2EventIrConfigElement_t;
/* IR Configuration Change List Event data ElementFlags values */
#define MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK (0x000F)
#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT (0x0000)
#define MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT (0x0001)
#define MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT (0x0002)
/* IR Configuration Change List Event data ReasonCode values */
#define MPI2_EVENT_IR_CHANGE_RC_ADDED (0x01)
#define MPI2_EVENT_IR_CHANGE_RC_REMOVED (0x02)
#define MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE (0x03)
#define MPI2_EVENT_IR_CHANGE_RC_HIDE (0x04)
#define MPI2_EVENT_IR_CHANGE_RC_UNHIDE (0x05)
#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED (0x06)
#define MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED (0x07)
#define MPI2_EVENT_IR_CHANGE_RC_PD_CREATED (0x08)
#define MPI2_EVENT_IR_CHANGE_RC_PD_DELETED (0x09)
typedef struct _MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST
{
U8 NumElements; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 Reserved2; /* 0x02 */
U8 ConfigNum; /* 0x03 */
U32 Flags; /* 0x04 */
MPI2_EVENT_IR_CONFIG_ELEMENT ConfigElement[MPI2_EVENT_IR_CONFIG_ELEMENT_COUNT]; /* 0x08 */
} MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
MPI2_POINTER PTR_MPI2_EVENT_DATA_IR_CONFIG_CHANGE_LIST,
Mpi2EventDataIrConfigChangeList_t,
MPI2_POINTER pMpi2EventDataIrConfigChangeList_t;
/* IR Configuration Change List Event data Flags values */
#define MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG (0x00000001)
/* SAS Discovery Event data */
typedef struct _MPI2_EVENT_DATA_SAS_DISCOVERY
{
U8 Flags; /* 0x00 */
U8 ReasonCode; /* 0x01 */
U8 PhysicalPort; /* 0x02 */
U8 Reserved1; /* 0x03 */
U32 DiscoveryStatus; /* 0x04 */
} MPI2_EVENT_DATA_SAS_DISCOVERY,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_DISCOVERY,
Mpi2EventDataSasDiscovery_t, MPI2_POINTER pMpi2EventDataSasDiscovery_t;
/* SAS Discovery Event data Flags values */
#define MPI2_EVENT_SAS_DISC_DEVICE_CHANGE (0x02)
#define MPI2_EVENT_SAS_DISC_IN_PROGRESS (0x01)
/* SAS Discovery Event data ReasonCode values */
#define MPI2_EVENT_SAS_DISC_RC_STARTED (0x01)
#define MPI2_EVENT_SAS_DISC_RC_COMPLETED (0x02)
/* SAS Discovery Event data DiscoveryStatus values */
#define MPI2_EVENT_SAS_DISC_DS_MAX_ENCLOSURES_EXCEED (0x80000000)
#define MPI2_EVENT_SAS_DISC_DS_MAX_EXPANDERS_EXCEED (0x40000000)
#define MPI2_EVENT_SAS_DISC_DS_MAX_DEVICES_EXCEED (0x20000000)
#define MPI2_EVENT_SAS_DISC_DS_MAX_TOPO_PHYS_EXCEED (0x10000000)
#define MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR (0x08000000)
#define MPI2_EVENT_SAS_DISC_DS_MULTI_SUBTRACTIVE_SUBTRACTIVE (0x00008000)
#define MPI2_EVENT_SAS_DISC_DS_EXP_MULTI_SUBTRACTIVE (0x00004000)
#define MPI2_EVENT_SAS_DISC_DS_MULTI_PORT_DOMAIN (0x00002000)
#define MPI2_EVENT_SAS_DISC_DS_TABLE_TO_SUBTRACTIVE_LINK (0x00001000)
#define MPI2_EVENT_SAS_DISC_DS_UNSUPPORTED_DEVICE (0x00000800)
#define MPI2_EVENT_SAS_DISC_DS_TABLE_LINK (0x00000400)
#define MPI2_EVENT_SAS_DISC_DS_SUBTRACTIVE_LINK (0x00000200)
#define MPI2_EVENT_SAS_DISC_DS_SMP_CRC_ERROR (0x00000100)
#define MPI2_EVENT_SAS_DISC_DS_SMP_FUNCTION_FAILED (0x00000080)
#define MPI2_EVENT_SAS_DISC_DS_INDEX_NOT_EXIST (0x00000040)
#define MPI2_EVENT_SAS_DISC_DS_OUT_ROUTE_ENTRIES (0x00000020)
#define MPI2_EVENT_SAS_DISC_DS_SMP_TIMEOUT (0x00000010)
#define MPI2_EVENT_SAS_DISC_DS_MULTIPLE_PORTS (0x00000004)
#define MPI2_EVENT_SAS_DISC_DS_UNADDRESSABLE_DEVICE (0x00000002)
#define MPI2_EVENT_SAS_DISC_DS_LOOP_DETECTED (0x00000001)
/* SAS Broadcast Primitive Event data */
typedef struct _MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE
{
U8 PhyNum; /* 0x00 */
U8 Port; /* 0x01 */
U8 PortWidth; /* 0x02 */
U8 Primitive; /* 0x03 */
} MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_BROADCAST_PRIMITIVE,
Mpi2EventDataSasBroadcastPrimitive_t,
MPI2_POINTER pMpi2EventDataSasBroadcastPrimitive_t;
/* defines for the Primitive field */
#define MPI2_EVENT_PRIMITIVE_CHANGE (0x01)
#define MPI2_EVENT_PRIMITIVE_SES (0x02)
#define MPI2_EVENT_PRIMITIVE_EXPANDER (0x03)
#define MPI2_EVENT_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
#define MPI2_EVENT_PRIMITIVE_RESERVED3 (0x05)
#define MPI2_EVENT_PRIMITIVE_RESERVED4 (0x06)
#define MPI2_EVENT_PRIMITIVE_CHANGE0_RESERVED (0x07)
#define MPI2_EVENT_PRIMITIVE_CHANGE1_RESERVED (0x08)
/* SAS Notify Primitive Event data */
typedef struct _MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE
{
U8 PhyNum; /* 0x00 */
U8 Port; /* 0x01 */
U8 Reserved1; /* 0x02 */
U8 Primitive; /* 0x03 */
} MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_NOTIFY_PRIMITIVE,
Mpi2EventDataSasNotifyPrimitive_t,
MPI2_POINTER pMpi2EventDataSasNotifyPrimitive_t;
/* defines for the Primitive field */
#define MPI2_EVENT_NOTIFY_ENABLE_SPINUP (0x01)
#define MPI2_EVENT_NOTIFY_POWER_LOSS_EXPECTED (0x02)
#define MPI2_EVENT_NOTIFY_RESERVED1 (0x03)
#define MPI2_EVENT_NOTIFY_RESERVED2 (0x04)
/* SAS Initiator Device Status Change Event data */
typedef struct _MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE
{
U8 ReasonCode; /* 0x00 */
U8 PhysicalPort; /* 0x01 */
U16 DevHandle; /* 0x02 */
U64 SASAddress; /* 0x04 */
} MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_DEV_STATUS_CHANGE,
Mpi2EventDataSasInitDevStatusChange_t,
MPI2_POINTER pMpi2EventDataSasInitDevStatusChange_t;
/* SAS Initiator Device Status Change event ReasonCode values */
#define MPI2_EVENT_SAS_INIT_RC_ADDED (0x01)
#define MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
/* SAS Initiator Device Table Overflow Event data */
typedef struct _MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW
{
U16 MaxInit; /* 0x00 */
U16 CurrentInit; /* 0x02 */
U64 SASAddress; /* 0x04 */
} MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_INIT_TABLE_OVERFLOW,
Mpi2EventDataSasInitTableOverflow_t,
MPI2_POINTER pMpi2EventDataSasInitTableOverflow_t;
/* SAS Topology Change List Event data */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check NumEntries at runtime.
*/
#ifndef MPI2_EVENT_SAS_TOPO_PHY_COUNT
#define MPI2_EVENT_SAS_TOPO_PHY_COUNT (1)
#endif
typedef struct _MPI2_EVENT_SAS_TOPO_PHY_ENTRY
{
U16 AttachedDevHandle; /* 0x00 */
U8 LinkRate; /* 0x02 */
U8 PhyStatus; /* 0x03 */
} MPI2_EVENT_SAS_TOPO_PHY_ENTRY, MPI2_POINTER PTR_MPI2_EVENT_SAS_TOPO_PHY_ENTRY,
Mpi2EventSasTopoPhyEntry_t, MPI2_POINTER pMpi2EventSasTopoPhyEntry_t;
typedef struct _MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST
{
U16 EnclosureHandle; /* 0x00 */
U16 ExpanderDevHandle; /* 0x02 */
U8 NumPhys; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 Reserved2; /* 0x06 */
U8 NumEntries; /* 0x08 */
U8 StartPhyNum; /* 0x09 */
U8 ExpStatus; /* 0x0A */
U8 PhysicalPort; /* 0x0B */
MPI2_EVENT_SAS_TOPO_PHY_ENTRY PHY[MPI2_EVENT_SAS_TOPO_PHY_COUNT]; /* 0x0C*/
} MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST,
Mpi2EventDataSasTopologyChangeList_t,
MPI2_POINTER pMpi2EventDataSasTopologyChangeList_t;
/* values for the ExpStatus field */
#define MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
#define MPI2_EVENT_SAS_TOPO_ES_ADDED (0x01)
#define MPI2_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
#define MPI2_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
#define MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
/* defines for the LinkRate field */
#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xF0)
#define MPI2_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
#define MPI2_EVENT_SAS_TOPO_LR_PREV_MASK (0x0F)
#define MPI2_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
#define MPI2_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
#define MPI2_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
#define MPI2_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
#define MPI2_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
#define MPI2_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
#define MPI2_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
#define MPI2_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
#define MPI2_EVENT_SAS_TOPO_LR_RATE_1_5 (0x08)
#define MPI2_EVENT_SAS_TOPO_LR_RATE_3_0 (0x09)
#define MPI2_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0A)
#define MPI25_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0B)
#define MPI26_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0C)
/* values for the PhyStatus field */
#define MPI2_EVENT_SAS_TOPO_PHYSTATUS_VACANT (0x80)
#define MPI2_EVENT_SAS_TOPO_PS_MULTIPLEX_CHANGE (0x10)
/* values for the PhyStatus ReasonCode sub-field */
#define MPI2_EVENT_SAS_TOPO_RC_MASK (0x0F)
#define MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED (0x01)
#define MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING (0x02)
#define MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED (0x03)
#define MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE (0x04)
#define MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING (0x05)
/* SAS Enclosure Device Status Change Event data */
typedef struct _MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE
{
U16 EnclosureHandle; /* 0x00 */
U8 ReasonCode; /* 0x02 */
U8 PhysicalPort; /* 0x03 */
U64 EnclosureLogicalID; /* 0x04 */
U16 NumSlots; /* 0x0C */
U16 StartSlot; /* 0x0E */
U32 PhyBits; /* 0x10 */
} MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_ENCL_DEV_STATUS_CHANGE,
Mpi2EventDataSasEnclDevStatusChange_t,
MPI2_POINTER pMpi2EventDataSasEnclDevStatusChange_t,
MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
MPI2_POINTER PTR_MPI26_EVENT_DATA_ENCL_DEV_STATUS_CHANGE,
Mpi26EventDataEnclDevStatusChange_t,
MPI2_POINTER pMpi26EventDataEnclDevStatusChange_t;
/* SAS Enclosure Device Status Change event ReasonCode values */
#define MPI2_EVENT_SAS_ENCL_RC_ADDED (0x01)
#define MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING (0x02)
/* Enclosure Device Status Change event ReasonCode values */
#define MPI26_EVENT_ENCL_RC_ADDED (0x01)
#define MPI26_EVENT_ENCL_RC_NOT_RESPONDING (0x02)
/* SAS PHY Counter Event data */
typedef struct _MPI2_EVENT_DATA_SAS_PHY_COUNTER
{
U64 TimeStamp; /* 0x00 */
U32 Reserved1; /* 0x08 */
U8 PhyEventCode; /* 0x0C */
U8 PhyNum; /* 0x0D */
U16 Reserved2; /* 0x0E */
U32 PhyEventInfo; /* 0x10 */
U8 CounterType; /* 0x14 */
U8 ThresholdWindow; /* 0x15 */
U8 TimeUnits; /* 0x16 */
U8 Reserved3; /* 0x17 */
U32 EventThreshold; /* 0x18 */
U16 ThresholdFlags; /* 0x1C */
U16 Reserved4; /* 0x1E */
} MPI2_EVENT_DATA_SAS_PHY_COUNTER,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_PHY_COUNTER,
Mpi2EventDataSasPhyCounter_t, MPI2_POINTER pMpi2EventDataSasPhyCounter_t;
/* use MPI2_SASPHY3_EVENT_CODE_ values from mpi2_cnfg.h for the PhyEventCode field */
/* use MPI2_SASPHY3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */
/* use MPI2_SASPHY3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */
/* use MPI2_SASPHY3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */
/* SAS Quiesce Event data */
typedef struct _MPI2_EVENT_DATA_SAS_QUIESCE
{
U8 ReasonCode; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U32 Reserved3; /* 0x04 */
} MPI2_EVENT_DATA_SAS_QUIESCE,
MPI2_POINTER PTR_MPI2_EVENT_DATA_SAS_QUIESCE,
Mpi2EventDataSasQuiesce_t, MPI2_POINTER pMpi2EventDataSasQuiesce_t;
/* SAS Quiesce Event data ReasonCode values */
#define MPI2_EVENT_SAS_QUIESCE_RC_STARTED (0x01)
#define MPI2_EVENT_SAS_QUIESCE_RC_COMPLETED (0x02)
typedef struct _MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR
{
U16 DevHandle; /* 0x00 */
U8 ReasonCode; /* 0x02 */
U8 PhysicalPort; /* 0x03 */
U32 Reserved1[2]; /* 0x04 */
U64 SASAddress; /* 0x0C */
U32 Reserved2[2]; /* 0x14 */
} MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
MPI2_POINTER PTR_MPI25_EVENT_DATA_SAS_DEVICE_DISCOVERY_ERROR,
Mpi25EventDataSasDeviceDiscoveryError_t,
MPI2_POINTER pMpi25EventDataSasDeviceDiscoveryError_t;
/* SAS Device Discovery Error Event data ReasonCode values */
#define MPI25_EVENT_SAS_DISC_ERR_SMP_FAILED (0x01)
#define MPI25_EVENT_SAS_DISC_ERR_SMP_TIMEOUT (0x02)
/* Host Based Discovery Phy Event data */
typedef struct _MPI2_EVENT_HBD_PHY_SAS
{
U8 Flags; /* 0x00 */
U8 NegotiatedLinkRate; /* 0x01 */
U8 PhyNum; /* 0x02 */
U8 PhysicalPort; /* 0x03 */
U32 Reserved1; /* 0x04 */
U8 InitialFrame[28]; /* 0x08 */
} MPI2_EVENT_HBD_PHY_SAS, MPI2_POINTER PTR_MPI2_EVENT_HBD_PHY_SAS,
Mpi2EventHbdPhySas_t, MPI2_POINTER pMpi2EventHbdPhySas_t;
/* values for the Flags field */
#define MPI2_EVENT_HBD_SAS_FLAGS_FRAME_VALID (0x02)
#define MPI2_EVENT_HBD_SAS_FLAGS_SATA_FRAME (0x01)
/* use MPI2_SAS_NEG_LINK_RATE_ defines from mpi2_cnfg.h for the NegotiatedLinkRate field */
typedef union _MPI2_EVENT_HBD_DESCRIPTOR
{
MPI2_EVENT_HBD_PHY_SAS Sas;
} MPI2_EVENT_HBD_DESCRIPTOR, MPI2_POINTER PTR_MPI2_EVENT_HBD_DESCRIPTOR,
Mpi2EventHbdDescriptor_t, MPI2_POINTER pMpi2EventHbdDescriptor_t;
typedef struct _MPI2_EVENT_DATA_HBD_PHY
{
U8 DescriptorType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U32 Reserved3; /* 0x04 */
MPI2_EVENT_HBD_DESCRIPTOR Descriptor; /* 0x08 */
} MPI2_EVENT_DATA_HBD_PHY, MPI2_POINTER PTR_MPI2_EVENT_DATA_HBD_PHY,
Mpi2EventDataHbdPhy_t, MPI2_POINTER pMpi2EventDataMpi2EventDataHbdPhy_t;
/* values for the DescriptorType field */
#define MPI2_EVENT_HBD_DT_SAS (0x01)
/* PCIe Device Status Change Event data (MPI v2.6 and later) */
typedef struct _MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE
{
U16 TaskTag; /* 0x00 */
U8 ReasonCode; /* 0x02 */
U8 PhysicalPort; /* 0x03 */
U8 ASC; /* 0x04 */
U8 ASCQ; /* 0x05 */
U16 DevHandle; /* 0x06 */
U32 Reserved2; /* 0x08 */
U64 WWID; /* 0x0C */
U8 LUN[8]; /* 0x14 */
} MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_DEVICE_STATUS_CHANGE,
Mpi26EventDataPCIeDeviceStatusChange_t,
MPI2_POINTER pMpi26EventDataPCIeDeviceStatusChange_t;
/* PCIe Device Status Change Event data ReasonCode values */
#define MPI26_EVENT_PCIDEV_STAT_RC_SMART_DATA (0x05)
#define MPI26_EVENT_PCIDEV_STAT_RC_UNSUPPORTED (0x07)
#define MPI26_EVENT_PCIDEV_STAT_RC_INTERNAL_DEVICE_RESET (0x08)
#define MPI26_EVENT_PCIDEV_STAT_RC_TASK_ABORT_INTERNAL (0x09)
#define MPI26_EVENT_PCIDEV_STAT_RC_ABORT_TASK_SET_INTERNAL (0x0A)
#define MPI26_EVENT_PCIDEV_STAT_RC_CLEAR_TASK_SET_INTERNAL (0x0B)
#define MPI26_EVENT_PCIDEV_STAT_RC_QUERY_TASK_INTERNAL (0x0C)
#define MPI26_EVENT_PCIDEV_STAT_RC_ASYNC_NOTIFICATION (0x0D)
#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_INTERNAL_DEV_RESET (0x0E)
#define MPI26_EVENT_PCIDEV_STAT_RC_CMP_TASK_ABORT_INTERNAL (0x0F)
#define MPI26_EVENT_PCIDEV_STAT_RC_DEV_INIT_FAILURE (0x10)
/* PCIe Enumeration Event data (MPI v2.6 and later) */
typedef struct _MPI26_EVENT_DATA_PCIE_ENUMERATION
{
U8 Flags; /* 0x00 */
U8 ReasonCode; /* 0x01 */
U8 PhysicalPort; /* 0x02 */
U8 Reserved1; /* 0x03 */
U32 EnumerationStatus; /* 0x04 */
} MPI26_EVENT_DATA_PCIE_ENUMERATION,
MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_ENUMERATION,
Mpi26EventDataPCIeEnumeration_t,
MPI2_POINTER pMpi26EventDataPCIeEnumeration_t;
/* PCIe Enumeration Event data Flags values */
#define MPI26_EVENT_PCIE_ENUM_DEVICE_CHANGE (0x02)
#define MPI26_EVENT_PCIE_ENUM_IN_PROGRESS (0x01)
/* PCIe Enumeration Event data ReasonCode values */
#define MPI26_EVENT_PCIE_ENUM_RC_STARTED (0x01)
#define MPI26_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
/* PCIe Enumeration Event data EnumerationStatus values */
#define MPI26_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
#define MPI26_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
#define MPI26_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
/* PCIe Topology Change List Event data (MPI v2.6 and later) */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check NumEntries at runtime.
*/
#ifndef MPI26_EVENT_PCIE_TOPO_PORT_COUNT
#define MPI26_EVENT_PCIE_TOPO_PORT_COUNT (1)
#endif
typedef struct _MPI26_EVENT_PCIE_TOPO_PORT_ENTRY
{
U16 AttachedDevHandle; /* 0x00 */
U8 PortStatus; /* 0x02 */
U8 Reserved1; /* 0x03 */
U8 CurrentPortInfo; /* 0x04 */
U8 Reserved2; /* 0x05 */
U8 PreviousPortInfo; /* 0x06 */
U8 Reserved3; /* 0x07 */
} MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
MPI2_POINTER PTR_MPI26_EVENT_PCIE_TOPO_PORT_ENTRY,
Mpi26EventPCIeTopoPortEntry_t,
MPI2_POINTER pMpi26EventPCIeTopoPortEntry_t;
/* PCIe Topology Change List Event data PortStatus values */
#define MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED (0x01)
#define MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
#define MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
#define MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
#define MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
/* PCIe Topology Change List Event data defines for CurrentPortInfo and PreviousPortInfo */
#define MPI26_EVENT_PCIE_TOPO_PI_LANE_MASK (0xF0)
#define MPI26_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
#define MPI26_EVENT_PCIE_TOPO_PI_1_LANE (0x10)
#define MPI26_EVENT_PCIE_TOPO_PI_2_LANES (0x20)
#define MPI26_EVENT_PCIE_TOPO_PI_4_LANES (0x30)
#define MPI26_EVENT_PCIE_TOPO_PI_8_LANES (0x40)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0F)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
#define MPI26_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
typedef struct _MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST
{
U16 EnclosureHandle; /* 0x00 */
U16 SwitchDevHandle; /* 0x02 */
U8 NumPorts; /* 0x04 */
U8 Reserved1; /* 0x05 */
U16 Reserved2; /* 0x06 */
U8 NumEntries; /* 0x08 */
U8 StartPortNum; /* 0x09 */
U8 SwitchStatus; /* 0x0A */
U8 PhysicalPort; /* 0x0B */
MPI26_EVENT_PCIE_TOPO_PORT_ENTRY PortEntry[MPI26_EVENT_PCIE_TOPO_PORT_COUNT]; /* 0x0C */
} MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST,
Mpi26EventDataPCIeTopologyChangeList_t,
MPI2_POINTER pMpi26EventDataPCIeTopologyChangeList_t;
/* PCIe Topology Change List Event data SwitchStatus values */
#define MPI26_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
#define MPI26_EVENT_PCIE_TOPO_SS_ADDED (0x01)
#define MPI26_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
#define MPI26_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
#define MPI26_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
/* PCIe Link Counter Event data (MPI v2.6 and later) */
typedef struct _MPI26_EVENT_DATA_PCIE_LINK_COUNTER
{
U64 TimeStamp; /* 0x00 */
U32 Reserved1; /* 0x08 */
U8 LinkEventCode; /* 0x0C */
U8 LinkNum; /* 0x0D */
U16 Reserved2; /* 0x0E */
U32 LinkEventInfo; /* 0x10 */
U8 CounterType; /* 0x14 */
U8 ThresholdWindow; /* 0x15 */
U8 TimeUnits; /* 0x16 */
U8 Reserved3; /* 0x17 */
U32 EventThreshold; /* 0x18 */
U16 ThresholdFlags; /* 0x1C */
U16 Reserved4; /* 0x1E */
} MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
MPI2_POINTER PTR_MPI26_EVENT_DATA_PCIE_LINK_COUNTER,
Mpi26EventDataPcieLinkCounter_t, MPI2_POINTER pMpi26EventDataPcieLinkCounter_t;
/* use MPI26_PCIELINK3_EVTCODE_ values from mpi2_cnfg.h for the LinkEventCode field */
/* use MPI26_PCIELINK3_COUNTER_TYPE_ values from mpi2_cnfg.h for the CounterType field */
/* use MPI26_PCIELINK3_TIME_UNITS_ values from mpi2_cnfg.h for the TimeUnits field */
/* use MPI26_PCIELINK3_TFLAGS_ values from mpi2_cnfg.h for the ThresholdFlags field */
/****************************************************************************
* EventAck message
****************************************************************************/
/* EventAck Request message */
typedef struct _MPI2_EVENT_ACK_REQUEST
{
U16 Reserved1; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Event; /* 0x0C */
U16 Reserved5; /* 0x0E */
U32 EventContext; /* 0x10 */
} MPI2_EVENT_ACK_REQUEST, MPI2_POINTER PTR_MPI2_EVENT_ACK_REQUEST,
Mpi2EventAckRequest_t, MPI2_POINTER pMpi2EventAckRequest_t;
/* EventAck Reply message */
typedef struct _MPI2_EVENT_ACK_REPLY
{
U16 Reserved1; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_EVENT_ACK_REPLY, MPI2_POINTER PTR_MPI2_EVENT_ACK_REPLY,
Mpi2EventAckReply_t, MPI2_POINTER pMpi2EventAckReply_t;
/****************************************************************************
* SendHostMessage message
****************************************************************************/
/* SendHostMessage Request message */
typedef struct _MPI2_SEND_HOST_MESSAGE_REQUEST
{
U16 HostDataLength; /* 0x00 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved1; /* 0x04 */
U8 Reserved2; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U8 Reserved4; /* 0x0C */
U8 DestVF_ID; /* 0x0D */
U16 Reserved5; /* 0x0E */
U32 Reserved6; /* 0x10 */
U32 Reserved7; /* 0x14 */
U32 Reserved8; /* 0x18 */
U32 Reserved9; /* 0x1C */
U32 Reserved10; /* 0x20 */
U32 HostData[1]; /* 0x24 */
} MPI2_SEND_HOST_MESSAGE_REQUEST,
MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REQUEST,
Mpi2SendHostMessageRequest_t, MPI2_POINTER pMpi2SendHostMessageRequest_t;
/* SendHostMessage Reply message */
typedef struct _MPI2_SEND_HOST_MESSAGE_REPLY
{
U16 HostDataLength; /* 0x00 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved1; /* 0x04 */
U8 Reserved2; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U16 Reserved4; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_SEND_HOST_MESSAGE_REPLY, MPI2_POINTER PTR_MPI2_SEND_HOST_MESSAGE_REPLY,
Mpi2SendHostMessageReply_t, MPI2_POINTER pMpi2SendHostMessageReply_t;
/****************************************************************************
* FWDownload message
****************************************************************************/
/* MPI v2.0 FWDownload Request message */
typedef struct _MPI2_FW_DOWNLOAD_REQUEST
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 TotalImageSize; /* 0x0C */
U32 Reserved5; /* 0x10 */
MPI2_MPI_SGE_UNION SGL; /* 0x14 */
} MPI2_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REQUEST,
Mpi2FWDownloadRequest, MPI2_POINTER pMpi2FWDownloadRequest;
#define MPI2_FW_DOWNLOAD_MSGFLGS_LAST_SEGMENT (0x01)
#define MPI2_FW_DOWNLOAD_ITYPE_FW (0x01)
#define MPI2_FW_DOWNLOAD_ITYPE_BIOS (0x02)
#define MPI2_FW_DOWNLOAD_ITYPE_MANUFACTURING (0x06)
#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_1 (0x07)
#define MPI2_FW_DOWNLOAD_ITYPE_CONFIG_2 (0x08)
#define MPI2_FW_DOWNLOAD_ITYPE_MEGARAID (0x09)
#define MPI2_FW_DOWNLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_DOWNLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_DOWNLOAD_ITYPE_PUBLIC_KEY (0x0C) /* MPI v2.5 and newer */
#define MPI2_FW_DOWNLOAD_ITYPE_CBB_BACKUP (0x0D)
#define MPI2_FW_DOWNLOAD_ITYPE_SBR (0x0E)
#define MPI2_FW_DOWNLOAD_ITYPE_SBR_BACKUP (0x0F)
#define MPI2_FW_DOWNLOAD_ITYPE_HIIM (0x10)
#define MPI2_FW_DOWNLOAD_ITYPE_HIIA (0x11)
#define MPI2_FW_DOWNLOAD_ITYPE_CTLR (0x12)
#define MPI2_FW_DOWNLOAD_ITYPE_IMR_FIRMWARE (0x13)
#define MPI2_FW_DOWNLOAD_ITYPE_MR_NVDATA (0x14)
#define MPI2_FW_DOWNLOAD_ITYPE_MIN_PRODUCT_SPECIFIC (0xF0)
/* MPI v2.0 FWDownload TransactionContext Element */
typedef struct _MPI2_FW_DOWNLOAD_TCSGE
{
U8 Reserved1; /* 0x00 */
U8 ContextSize; /* 0x01 */
U8 DetailsLength; /* 0x02 */
U8 Flags; /* 0x03 */
U32 Reserved2; /* 0x04 */
U32 ImageOffset; /* 0x08 */
U32 ImageSize; /* 0x0C */
} MPI2_FW_DOWNLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_TCSGE,
Mpi2FWDownloadTCSGE_t, MPI2_POINTER pMpi2FWDownloadTCSGE_t;
/* MPI v2.5 FWDownload Request message */
typedef struct _MPI25_FW_DOWNLOAD_REQUEST
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 TotalImageSize; /* 0x0C */
U32 Reserved5; /* 0x10 */
U32 Reserved6; /* 0x14 */
U32 ImageOffset; /* 0x18 */
U32 ImageSize; /* 0x1C */
MPI25_SGE_IO_UNION SGL; /* 0x20 */
} MPI25_FW_DOWNLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_DOWNLOAD_REQUEST,
Mpi25FWDownloadRequest, MPI2_POINTER pMpi25FWDownloadRequest;
/* FWDownload Reply message */
typedef struct _MPI2_FW_DOWNLOAD_REPLY
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_FW_DOWNLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_DOWNLOAD_REPLY,
Mpi2FWDownloadReply_t, MPI2_POINTER pMpi2FWDownloadReply_t;
/****************************************************************************
* FWUpload message
****************************************************************************/
/* MPI v2.0 FWUpload Request message */
typedef struct _MPI2_FW_UPLOAD_REQUEST
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 Reserved5; /* 0x0C */
U32 Reserved6; /* 0x10 */
MPI2_MPI_SGE_UNION SGL; /* 0x14 */
} MPI2_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REQUEST,
Mpi2FWUploadRequest_t, MPI2_POINTER pMpi2FWUploadRequest_t;
#define MPI2_FW_UPLOAD_ITYPE_FW_CURRENT (0x00)
#define MPI2_FW_UPLOAD_ITYPE_FW_FLASH (0x01)
#define MPI2_FW_UPLOAD_ITYPE_BIOS_FLASH (0x02)
#define MPI2_FW_UPLOAD_ITYPE_FW_BACKUP (0x05)
#define MPI2_FW_UPLOAD_ITYPE_MANUFACTURING (0x06)
#define MPI2_FW_UPLOAD_ITYPE_CONFIG_1 (0x07)
#define MPI2_FW_UPLOAD_ITYPE_CONFIG_2 (0x08)
#define MPI2_FW_UPLOAD_ITYPE_MEGARAID (0x09)
#define MPI2_FW_UPLOAD_ITYPE_COMPLETE (0x0A)
#define MPI2_FW_UPLOAD_ITYPE_COMMON_BOOT_BLOCK (0x0B)
#define MPI2_FW_UPLOAD_ITYPE_CBB_BACKUP (0x0D)
#define MPI2_FW_UPLOAD_ITYPE_SBR (0x0E)
#define MPI2_FW_UPLOAD_ITYPE_SBR_BACKUP (0x0F)
#define MPI2_FW_UPLOAD_ITYPE_HIIM (0x10)
#define MPI2_FW_UPLOAD_ITYPE_HIIA (0x11)
#define MPI2_FW_UPLOAD_ITYPE_CTLR (0x12)
#define MPI2_FW_UPLOAD_ITYPE_IMR_FIRMWARE (0x13)
#define MPI2_FW_UPLOAD_ITYPE_MR_NVDATA (0x14)
/* MPI v2.0 FWUpload TransactionContext Element */
typedef struct _MPI2_FW_UPLOAD_TCSGE
{
U8 Reserved1; /* 0x00 */
U8 ContextSize; /* 0x01 */
U8 DetailsLength; /* 0x02 */
U8 Flags; /* 0x03 */
U32 Reserved2; /* 0x04 */
U32 ImageOffset; /* 0x08 */
U32 ImageSize; /* 0x0C */
} MPI2_FW_UPLOAD_TCSGE, MPI2_POINTER PTR_MPI2_FW_UPLOAD_TCSGE,
Mpi2FWUploadTCSGE_t, MPI2_POINTER pMpi2FWUploadTCSGE_t;
/* MPI v2.5 FWUpload Request message */
typedef struct _MPI25_FW_UPLOAD_REQUEST
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U32 Reserved5; /* 0x0C */
U32 Reserved6; /* 0x10 */
U32 Reserved7; /* 0x14 */
U32 ImageOffset; /* 0x18 */
U32 ImageSize; /* 0x1C */
MPI25_SGE_IO_UNION SGL; /* 0x20 */
} MPI25_FW_UPLOAD_REQUEST, MPI2_POINTER PTR_MPI25_FW_UPLOAD_REQUEST,
Mpi25FWUploadRequest_t, MPI2_POINTER pMpi25FWUploadRequest_t;
/* FWUpload Reply message */
typedef struct _MPI2_FW_UPLOAD_REPLY
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
U32 ActualImageSize; /* 0x14 */
} MPI2_FW_UPLOAD_REPLY, MPI2_POINTER PTR_MPI2_FW_UPLOAD_REPLY,
Mpi2FWUploadReply_t, MPI2_POINTER pMPi2FWUploadReply_t;
/* FW Image Header */
typedef struct _MPI2_FW_IMAGE_HEADER
{
U32 Signature; /* 0x00 */
U32 Signature0; /* 0x04 */
U32 Signature1; /* 0x08 */
U32 Signature2; /* 0x0C */
MPI2_VERSION_UNION MPIVersion; /* 0x10 */
MPI2_VERSION_UNION FWVersion; /* 0x14 */
MPI2_VERSION_UNION NVDATAVersion; /* 0x18 */
MPI2_VERSION_UNION PackageVersion; /* 0x1C */
U16 VendorID; /* 0x20 */
U16 ProductID; /* 0x22 */
U16 ProtocolFlags; /* 0x24 */
U16 Reserved26; /* 0x26 */
U32 IOCCapabilities; /* 0x28 */
U32 ImageSize; /* 0x2C */
U32 NextImageHeaderOffset; /* 0x30 */
U32 Checksum; /* 0x34 */
U32 Reserved38; /* 0x38 */
U32 Reserved3C; /* 0x3C */
U32 Reserved40; /* 0x40 */
U32 Reserved44; /* 0x44 */
U32 Reserved48; /* 0x48 */
U32 Reserved4C; /* 0x4C */
U32 Reserved50; /* 0x50 */
U32 Reserved54; /* 0x54 */
U32 Reserved58; /* 0x58 */
U32 Reserved5C; /* 0x5C */
U32 BootFlags; /* 0x60 */ /* reserved in MPI v2.5 and earlier */
U32 FirmwareVersionNameWhat; /* 0x64 */
U8 FirmwareVersionName[32]; /* 0x68 */
U32 VendorNameWhat; /* 0x88 */
U8 VendorName[32]; /* 0x8C */
U32 PackageNameWhat; /* 0x88 */
U8 PackageName[32]; /* 0x8C */
U32 ReservedD0; /* 0xD0 */
U32 ReservedD4; /* 0xD4 */
U32 ReservedD8; /* 0xD8 */
U32 ReservedDC; /* 0xDC */
U32 ReservedE0; /* 0xE0 */
U32 ReservedE4; /* 0xE4 */
U32 ReservedE8; /* 0xE8 */
U32 ReservedEC; /* 0xEC */
U32 ReservedF0; /* 0xF0 */
U32 ReservedF4; /* 0xF4 */
U32 ReservedF8; /* 0xF8 */
U32 ReservedFC; /* 0xFC */
} MPI2_FW_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_FW_IMAGE_HEADER,
Mpi2FWImageHeader_t, MPI2_POINTER pMpi2FWImageHeader_t;
/* Signature field */
#define MPI2_FW_HEADER_SIGNATURE_OFFSET (0x00)
#define MPI2_FW_HEADER_SIGNATURE_MASK (0xFF000000)
#define MPI2_FW_HEADER_SIGNATURE (0xEA000000)
#define MPI26_FW_HEADER_SIGNATURE (0xEB000000)
/* Signature0 field */
#define MPI2_FW_HEADER_SIGNATURE0_OFFSET (0x04)
#define MPI2_FW_HEADER_SIGNATURE0 (0x5AFAA55A)
#define MPI26_FW_HEADER_SIGNATURE0_BASE (0x5AEAA500) /* Last byte is defined by architecture */
#define MPI26_FW_HEADER_SIGNATURE0_ARC_0 (0x5A)
#define MPI26_FW_HEADER_SIGNATURE0_ARC_1 (0x00)
#define MPI26_FW_HEADER_SIGNATURE0_ARC_2 (0x01)
#define MPI26_FW_HEADER_SIGNATURE0_ARC_3 (0x02)
#define MPI26_FW_HEADER_SIGNATURE0 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_0) // legacy (0x5AEAA55A)
#define MPI26_FW_HEADER_SIGNATURE0_3516 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_1)
#define MPI26_FW_HEADER_SIGNATURE0_4008 (MPI26_FW_HEADER_SIGNATURE0_BASE+MPI26_FW_HEADER_SIGNATURE0_ARC_3)
/* Signature1 field */
#define MPI2_FW_HEADER_SIGNATURE1_OFFSET (0x08)
#define MPI2_FW_HEADER_SIGNATURE1 (0xA55AFAA5)
#define MPI26_FW_HEADER_SIGNATURE1 (0xA55AEAA5)
/* Signature2 field */
#define MPI2_FW_HEADER_SIGNATURE2_OFFSET (0x0C)
#define MPI2_FW_HEADER_SIGNATURE2 (0x5AA55AFA)
#define MPI26_FW_HEADER_SIGNATURE2 (0x5AA55AEA)
/* defines for using the ProductID field */
#define MPI2_FW_HEADER_PID_TYPE_MASK (0xF000)
#define MPI2_FW_HEADER_PID_TYPE_SAS (0x2000)
#define MPI2_FW_HEADER_PID_PROD_MASK (0x0F00)
#define MPI2_FW_HEADER_PID_PROD_A (0x0000)
#define MPI2_FW_HEADER_PID_PROD_TARGET_INITIATOR_SCSI (0x0200)
#define MPI2_FW_HEADER_PID_PROD_IR_SCSI (0x0700)
#define MPI2_FW_HEADER_PID_FAMILY_MASK (0x00FF)
/* SAS ProductID Family bits */
#define MPI2_FW_HEADER_PID_FAMILY_2108_SAS (0x0013)
#define MPI2_FW_HEADER_PID_FAMILY_2208_SAS (0x0014)
#define MPI25_FW_HEADER_PID_FAMILY_3108_SAS (0x0021)
#define MPI26_FW_HEADER_PID_FAMILY_3324_SAS (0x0028)
#define MPI26_FW_HEADER_PID_FAMILY_3516_SAS (0x0031)
/* use MPI2_IOCFACTS_PROTOCOL_ defines for ProtocolFlags field */
/* use MPI2_IOCFACTS_CAPABILITY_ defines for IOCCapabilities field */
#define MPI2_FW_HEADER_IMAGESIZE_OFFSET (0x2C)
#define MPI2_FW_HEADER_NEXTIMAGE_OFFSET (0x30)
#define MPI26_FW_HEADER_BOOTFLAGS_OFFSET (0x60)
#define MPI2_FW_HEADER_VERNMHWAT_OFFSET (0x64)
#define MPI2_FW_HEADER_WHAT_SIGNATURE (0x29232840)
#define MPI2_FW_HEADER_SIZE (0x100)
/* Extended Image Header */
typedef struct _MPI2_EXT_IMAGE_HEADER
{
U8 ImageType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U32 Checksum; /* 0x04 */
U32 ImageSize; /* 0x08 */
U32 NextImageHeaderOffset; /* 0x0C */
U32 PackageVersion; /* 0x10 */
U32 Reserved3; /* 0x14 */
U32 Reserved4; /* 0x18 */
U32 Reserved5; /* 0x1C */
U8 IdentifyString[32]; /* 0x20 */
} MPI2_EXT_IMAGE_HEADER, MPI2_POINTER PTR_MPI2_EXT_IMAGE_HEADER,
Mpi2ExtImageHeader_t, MPI2_POINTER pMpi2ExtImageHeader_t;
/* useful offsets */
#define MPI2_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
#define MPI2_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
#define MPI2_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0C)
#define MPI2_EXT_IMAGE_HEADER_SIZE (0x40)
/* defines for the ImageType field */
#define MPI2_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
#define MPI2_EXT_IMAGE_TYPE_FW (0x01)
#define MPI2_EXT_IMAGE_TYPE_NVDATA (0x03)
#define MPI2_EXT_IMAGE_TYPE_BOOTLOADER (0x04)
#define MPI2_EXT_IMAGE_TYPE_INITIALIZATION (0x05)
#define MPI2_EXT_IMAGE_TYPE_FLASH_LAYOUT (0x06)
#define MPI2_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
#define MPI2_EXT_IMAGE_TYPE_MEGARAID (0x08)
#define MPI2_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09) /* MPI v2.5 and newer */
#define MPI2_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
#define MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xFF)
#define MPI2_EXT_IMAGE_TYPE_MAX (MPI2_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC) /* deprecated */
/* FLASH Layout Extended Image Data */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check RegionsPerLayout at runtime.
*/
#ifndef MPI2_FLASH_NUMBER_OF_REGIONS
#define MPI2_FLASH_NUMBER_OF_REGIONS (1)
#endif
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check NumberOfLayouts at runtime.
*/
#ifndef MPI2_FLASH_NUMBER_OF_LAYOUTS
#define MPI2_FLASH_NUMBER_OF_LAYOUTS (1)
#endif
typedef struct _MPI2_FLASH_REGION
{
U8 RegionType; /* 0x00 */
U8 Reserved1; /* 0x01 */
U16 Reserved2; /* 0x02 */
U32 RegionOffset; /* 0x04 */
U32 RegionSize; /* 0x08 */
U32 Reserved3; /* 0x0C */
} MPI2_FLASH_REGION, MPI2_POINTER PTR_MPI2_FLASH_REGION,
Mpi2FlashRegion_t, MPI2_POINTER pMpi2FlashRegion_t;
typedef struct _MPI2_FLASH_LAYOUT
{
U32 FlashSize; /* 0x00 */
U32 Reserved1; /* 0x04 */
U32 Reserved2; /* 0x08 */
U32 Reserved3; /* 0x0C */
MPI2_FLASH_REGION Region[MPI2_FLASH_NUMBER_OF_REGIONS];/* 0x10 */
} MPI2_FLASH_LAYOUT, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT,
Mpi2FlashLayout_t, MPI2_POINTER pMpi2FlashLayout_t;
typedef struct _MPI2_FLASH_LAYOUT_DATA
{
U8 ImageRevision; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 SizeOfRegion; /* 0x02 */
U8 Reserved2; /* 0x03 */
U16 NumberOfLayouts; /* 0x04 */
U16 RegionsPerLayout; /* 0x06 */
U16 MinimumSectorAlignment; /* 0x08 */
U16 Reserved3; /* 0x0A */
U32 Reserved4; /* 0x0C */
MPI2_FLASH_LAYOUT Layout[MPI2_FLASH_NUMBER_OF_LAYOUTS];/* 0x10 */
} MPI2_FLASH_LAYOUT_DATA, MPI2_POINTER PTR_MPI2_FLASH_LAYOUT_DATA,
Mpi2FlashLayoutData_t, MPI2_POINTER pMpi2FlashLayoutData_t;
/* defines for the RegionType field */
#define MPI2_FLASH_REGION_UNUSED (0x00)
#define MPI2_FLASH_REGION_FIRMWARE (0x01)
#define MPI2_FLASH_REGION_BIOS (0x02)
#define MPI2_FLASH_REGION_NVDATA (0x03)
#define MPI2_FLASH_REGION_FIRMWARE_BACKUP (0x05)
#define MPI2_FLASH_REGION_MFG_INFORMATION (0x06)
#define MPI2_FLASH_REGION_CONFIG_1 (0x07)
#define MPI2_FLASH_REGION_CONFIG_2 (0x08)
#define MPI2_FLASH_REGION_MEGARAID (0x09)
#define MPI2_FLASH_REGION_COMMON_BOOT_BLOCK (0x0A)
#define MPI2_FLASH_REGION_INIT (MPI2_FLASH_REGION_COMMON_BOOT_BLOCK) /* older name */
#define MPI2_FLASH_REGION_CBB_BACKUP (0x0D)
#define MPI2_FLASH_REGION_SBR (0x0E)
#define MPI2_FLASH_REGION_SBR_BACKUP (0x0F)
#define MPI2_FLASH_REGION_HIIM (0x10)
#define MPI2_FLASH_REGION_HIIA (0x11)
#define MPI2_FLASH_REGION_CTLR (0x12)
#define MPI2_FLASH_REGION_IMR_FIRMWARE (0x13)
#define MPI2_FLASH_REGION_MR_NVDATA (0x14)
/* ImageRevision */
#define MPI2_FLASH_LAYOUT_IMAGE_REVISION (0x00)
/* Supported Devices Extended Image Data */
/*
* Host code (drivers, BIOS, utilities, etc.) should leave this define set to
* one and check NumberOfDevices at runtime.
*/
#ifndef MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES
#define MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES (1)
#endif
typedef struct _MPI2_SUPPORTED_DEVICE
{
U16 DeviceID; /* 0x00 */
U16 VendorID; /* 0x02 */
U16 DeviceIDMask; /* 0x04 */
U16 Reserved1; /* 0x06 */
U8 LowPCIRev; /* 0x08 */
U8 HighPCIRev; /* 0x09 */
U16 Reserved2; /* 0x0A */
U32 Reserved3; /* 0x0C */
} MPI2_SUPPORTED_DEVICE, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICE,
Mpi2SupportedDevice_t, MPI2_POINTER pMpi2SupportedDevice_t;
typedef struct _MPI2_SUPPORTED_DEVICES_DATA
{
U8 ImageRevision; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 NumberOfDevices; /* 0x02 */
U8 Reserved2; /* 0x03 */
U32 Reserved3; /* 0x04 */
MPI2_SUPPORTED_DEVICE SupportedDevice[MPI2_SUPPORTED_DEVICES_IMAGE_NUM_DEVICES]; /* 0x08 */
} MPI2_SUPPORTED_DEVICES_DATA, MPI2_POINTER PTR_MPI2_SUPPORTED_DEVICES_DATA,
Mpi2SupportedDevicesData_t, MPI2_POINTER pMpi2SupportedDevicesData_t;
/* ImageRevision */
#define MPI2_SUPPORTED_DEVICES_IMAGE_REVISION (0x00)
/* Init Extended Image Data */
typedef struct _MPI2_INIT_IMAGE_FOOTER
{
U32 BootFlags; /* 0x00 */
U32 ImageSize; /* 0x04 */
U32 Signature0; /* 0x08 */
U32 Signature1; /* 0x0C */
U32 Signature2; /* 0x10 */
U32 ResetVector; /* 0x14 */
} MPI2_INIT_IMAGE_FOOTER, MPI2_POINTER PTR_MPI2_INIT_IMAGE_FOOTER,
Mpi2InitImageFooter_t, MPI2_POINTER pMpi2InitImageFooter_t;
/* defines for the BootFlags field */
#define MPI2_INIT_IMAGE_BOOTFLAGS_OFFSET (0x00)
/* defines for the ImageSize field */
#define MPI2_INIT_IMAGE_IMAGESIZE_OFFSET (0x04)
/* defines for the Signature0 field */
#define MPI2_INIT_IMAGE_SIGNATURE0_OFFSET (0x08)
#define MPI2_INIT_IMAGE_SIGNATURE0 (0x5AA55AEA)
/* defines for the Signature1 field */
#define MPI2_INIT_IMAGE_SIGNATURE1_OFFSET (0x0C)
#define MPI2_INIT_IMAGE_SIGNATURE1 (0xA55AEAA5)
/* defines for the Signature2 field */
#define MPI2_INIT_IMAGE_SIGNATURE2_OFFSET (0x10)
#define MPI2_INIT_IMAGE_SIGNATURE2 (0x5AEAA55A)
/* Signature fields as individual bytes */
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_0 (0xEA)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_1 (0x5A)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_2 (0xA5)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_3 (0x5A)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_4 (0xA5)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_5 (0xEA)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_6 (0x5A)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_7 (0xA5)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_8 (0x5A)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_9 (0xA5)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_A (0xEA)
#define MPI2_INIT_IMAGE_SIGNATURE_BYTE_B (0x5A)
/* defines for the ResetVector field */
#define MPI2_INIT_IMAGE_RESETVECTOR_OFFSET (0x14)
/* Encrypted Hash Extended Image Data */
typedef struct _MPI25_ENCRYPTED_HASH_ENTRY
{
U8 HashImageType; /* 0x00 */
U8 HashAlgorithm; /* 0x01 */
U8 EncryptionAlgorithm; /* 0x02 */
U8 Reserved1; /* 0x03 */
U32 Reserved2; /* 0x04 */
U32 EncryptedHash[1]; /* 0x08 */ /* variable length */
} MPI25_ENCRYPTED_HASH_ENTRY, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_ENTRY,
Mpi25EncryptedHashEntry_t, MPI2_POINTER pMpi25EncryptedHashEntry_t;
/* values for HashImageType */
#define MPI25_HASH_IMAGE_TYPE_UNUSED (0x00)
#define MPI25_HASH_IMAGE_TYPE_FIRMWARE (0x01)
#define MPI25_HASH_IMAGE_TYPE_BIOS (0x02)
/* values for HashAlgorithm */
#define MPI25_HASH_ALGORITHM_UNUSED (0x00)
#define MPI25_HASH_ALGORITHM_SHA256 (0x01)
/* values for EncryptionAlgorithm */
#define MPI25_ENCRYPTION_ALG_UNUSED (0x00)
#define MPI25_ENCRYPTION_ALG_RSA256 (0x01)
typedef struct _MPI25_ENCRYPTED_HASH_DATA
{
U8 ImageVersion; /* 0x00 */
U8 NumHash; /* 0x01 */
U16 Reserved1; /* 0x02 */
U32 Reserved2; /* 0x04 */
MPI25_ENCRYPTED_HASH_ENTRY EncryptedHashEntry[1]; /* 0x08 */ /* variable number of entries */
} MPI25_ENCRYPTED_HASH_DATA, MPI2_POINTER PTR_MPI25_ENCRYPTED_HASH_DATA,
Mpi25EncryptedHashData_t, MPI2_POINTER pMpi25EncryptedHashData_t;
/****************************************************************************
* PowerManagementControl message
****************************************************************************/
/* PowerManagementControl Request message */
typedef struct _MPI2_PWR_MGMT_CONTROL_REQUEST
{
U8 Feature; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U8 Parameter1; /* 0x0C */
U8 Parameter2; /* 0x0D */
U8 Parameter3; /* 0x0E */
U8 Parameter4; /* 0x0F */
U32 Reserved5; /* 0x10 */
U32 Reserved6; /* 0x14 */
} MPI2_PWR_MGMT_CONTROL_REQUEST, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REQUEST,
Mpi2PwrMgmtControlRequest_t, MPI2_POINTER pMpi2PwrMgmtControlRequest_t;
/* defines for the Feature field */
#define MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND (0x01)
#define MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION (0x02)
#define MPI2_PM_CONTROL_FEATURE_PCIE_LINK (0x03) /* obsolete */
#define MPI2_PM_CONTROL_FEATURE_IOC_SPEED (0x04)
#define MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE (0x05) /* reserved in MPI 2.0 */
#define MPI2_PM_CONTROL_FEATURE_MIN_PRODUCT_SPECIFIC (0x80)
#define MPI2_PM_CONTROL_FEATURE_MAX_PRODUCT_SPECIFIC (0xFF)
/* parameter usage for the MPI2_PM_CONTROL_FEATURE_DA_PHY_POWER_COND Feature */
/* Parameter1 contains a PHY number */
/* Parameter2 indicates power condition action using these defines */
#define MPI2_PM_CONTROL_PARAM2_PARTIAL (0x01)
#define MPI2_PM_CONTROL_PARAM2_SLUMBER (0x02)
#define MPI2_PM_CONTROL_PARAM2_EXIT_PWR_MGMT (0x03)
/* Parameter3 and Parameter4 are reserved */
/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PORT_WIDTH_MODULATION Feature */
/* Parameter1 contains SAS port width modulation group number */
/* Parameter2 indicates IOC action using these defines */
#define MPI2_PM_CONTROL_PARAM2_REQUEST_OWNERSHIP (0x01)
#define MPI2_PM_CONTROL_PARAM2_CHANGE_MODULATION (0x02)
#define MPI2_PM_CONTROL_PARAM2_RELINQUISH_OWNERSHIP (0x03)
/* Parameter3 indicates desired modulation level using these defines */
#define MPI2_PM_CONTROL_PARAM3_25_PERCENT (0x00)
#define MPI2_PM_CONTROL_PARAM3_50_PERCENT (0x01)
#define MPI2_PM_CONTROL_PARAM3_75_PERCENT (0x02)
#define MPI2_PM_CONTROL_PARAM3_100_PERCENT (0x03)
/* Parameter4 is reserved */
/* this next set (_PCIE_LINK) is obsolete */
/* parameter usage for the MPI2_PM_CONTROL_FEATURE_PCIE_LINK Feature */
/* Parameter1 indicates desired PCIe link speed using these defines */
#define MPI2_PM_CONTROL_PARAM1_PCIE_2_5_GBPS (0x00) /* obsolete */
#define MPI2_PM_CONTROL_PARAM1_PCIE_5_0_GBPS (0x01) /* obsolete */
#define MPI2_PM_CONTROL_PARAM1_PCIE_8_0_GBPS (0x02) /* obsolete */
/* Parameter2 indicates desired PCIe link width using these defines */
#define MPI2_PM_CONTROL_PARAM2_WIDTH_X1 (0x01) /* obsolete */
#define MPI2_PM_CONTROL_PARAM2_WIDTH_X2 (0x02) /* obsolete */
#define MPI2_PM_CONTROL_PARAM2_WIDTH_X4 (0x04) /* obsolete */
#define MPI2_PM_CONTROL_PARAM2_WIDTH_X8 (0x08) /* obsolete */
/* Parameter3 and Parameter4 are reserved */
/* parameter usage for the MPI2_PM_CONTROL_FEATURE_IOC_SPEED Feature */
/* Parameter1 indicates desired IOC hardware clock speed using these defines */
#define MPI2_PM_CONTROL_PARAM1_FULL_IOC_SPEED (0x01)
#define MPI2_PM_CONTROL_PARAM1_HALF_IOC_SPEED (0x02)
#define MPI2_PM_CONTROL_PARAM1_QUARTER_IOC_SPEED (0x04)
#define MPI2_PM_CONTROL_PARAM1_EIGHTH_IOC_SPEED (0x08)
/* Parameter2, Parameter3, and Parameter4 are reserved */
/* parameter usage for the MPI2_PM_CONTROL_FEATURE_GLOBAL_PWR_MGMT_MODE Feature */
/* Parameter1 indicates host action regarding global power management mode */
#define MPI2_PM_CONTROL_PARAM1_TAKE_CONTROL (0x01)
#define MPI2_PM_CONTROL_PARAM1_CHANGE_GLOBAL_MODE (0x02)
#define MPI2_PM_CONTROL_PARAM1_RELEASE_CONTROL (0x03)
/* Parameter2 indicates the requested global power management mode */
#define MPI2_PM_CONTROL_PARAM2_FULL_PWR_PERF (0x01)
#define MPI2_PM_CONTROL_PARAM2_REDUCED_PWR_PERF (0x08)
#define MPI2_PM_CONTROL_PARAM2_STANDBY (0x40)
/* Parameter3 and Parameter4 are reserved */
/* PowerManagementControl Reply message */
typedef struct _MPI2_PWR_MGMT_CONTROL_REPLY
{
U8 Feature; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 Reserved2; /* 0x04 */
U8 Reserved3; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved4; /* 0x0A */
U16 Reserved5; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI2_PWR_MGMT_CONTROL_REPLY, MPI2_POINTER PTR_MPI2_PWR_MGMT_CONTROL_REPLY,
Mpi2PwrMgmtControlReply_t, MPI2_POINTER pMpi2PwrMgmtControlReply_t;
/****************************************************************************
* IO Unit Control messages (MPI v2.6 and later only.)
****************************************************************************/
/* IO Unit Control Request Message */
typedef struct _MPI26_IOUNIT_CONTROL_REQUEST
{
U8 Operation; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 ChainOffset; /* 0x02 */
U8 Function; /* 0x03 */
U16 DevHandle; /* 0x04 */
U8 IOCParameter; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U16 Reserved4; /* 0x0C */
U8 PhyNum; /* 0x0E */
U8 PrimFlags; /* 0x0F */
U32 Primitive; /* 0x10 */
U8 LookupMethod; /* 0x14 */
U8 Reserved5; /* 0x15 */
U16 SlotNumber; /* 0x16 */
U64 LookupAddress; /* 0x18 */
U32 IOCParameterValue; /* 0x20 */
U32 Reserved7; /* 0x24 */
U32 Reserved8; /* 0x28 */
} MPI26_IOUNIT_CONTROL_REQUEST,
MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REQUEST,
Mpi26IoUnitControlRequest_t, MPI2_POINTER pMpi26IoUnitControlRequest_t;
/* values for the Operation field */
#define MPI26_CTRL_OP_CLEAR_ALL_PERSISTENT (0x02)
#define MPI26_CTRL_OP_SAS_PHY_LINK_RESET (0x06)
#define MPI26_CTRL_OP_SAS_PHY_HARD_RESET (0x07)
#define MPI26_CTRL_OP_PHY_CLEAR_ERROR_LOG (0x08)
#define MPI26_CTRL_OP_LINK_CLEAR_ERROR_LOG (0x09)
#define MPI26_CTRL_OP_SAS_SEND_PRIMITIVE (0x0A)
#define MPI26_CTRL_OP_FORCE_FULL_DISCOVERY (0x0B)
#define MPI26_CTRL_OP_REMOVE_DEVICE (0x0D)
#define MPI26_CTRL_OP_LOOKUP_MAPPING (0x0E)
#define MPI26_CTRL_OP_SET_IOC_PARAMETER (0x0F)
#define MPI26_CTRL_OP_ENABLE_FP_DEVICE (0x10)
#define MPI26_CTRL_OP_DISABLE_FP_DEVICE (0x11)
#define MPI26_CTRL_OP_ENABLE_FP_ALL (0x12)
#define MPI26_CTRL_OP_DISABLE_FP_ALL (0x13)
#define MPI26_CTRL_OP_DEV_ENABLE_NCQ (0x14)
#define MPI26_CTRL_OP_DEV_DISABLE_NCQ (0x15)
#define MPI26_CTRL_OP_SHUTDOWN (0x16)
#define MPI26_CTRL_OP_DEV_ENABLE_PERSIST_CONNECTION (0x17)
#define MPI26_CTRL_OP_DEV_DISABLE_PERSIST_CONNECTION (0x18)
#define MPI26_CTRL_OP_DEV_CLOSE_PERSIST_CONNECTION (0x19)
#define MPI26_CTRL_OP_ENABLE_NVME_SGL_FORMAT (0x1A)
#define MPI26_CTRL_OP_DISABLE_NVME_SGL_FORMAT (0x1B)
#define MPI26_CTRL_OP_PRODUCT_SPECIFIC_MIN (0x80)
/* values for the PrimFlags field */
#define MPI26_CTRL_PRIMFLAGS_SINGLE (0x08)
#define MPI26_CTRL_PRIMFLAGS_TRIPLE (0x02)
#define MPI26_CTRL_PRIMFLAGS_REDUNDANT (0x01)
/* values for the LookupMethod field */
#define MPI26_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
#define MPI26_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
#define MPI26_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
/* IO Unit Control Reply Message */
typedef struct _MPI26_IOUNIT_CONTROL_REPLY
{
U8 Operation; /* 0x00 */
U8 Reserved1; /* 0x01 */
U8 MsgLength; /* 0x02 */
U8 Function; /* 0x03 */
U16 DevHandle; /* 0x04 */
U8 IOCParameter; /* 0x06 */
U8 MsgFlags; /* 0x07 */
U8 VP_ID; /* 0x08 */
U8 VF_ID; /* 0x09 */
U16 Reserved3; /* 0x0A */
U16 Reserved4; /* 0x0C */
U16 IOCStatus; /* 0x0E */
U32 IOCLogInfo; /* 0x10 */
} MPI26_IOUNIT_CONTROL_REPLY, MPI2_POINTER PTR_MPI26_IOUNIT_CONTROL_REPLY,
Mpi26IoUnitControlReply_t, MPI2_POINTER pMpi26IoUnitControlReply_t;
#endif