/*
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 or later at the following locations:
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
*/
#include "imx53-pinfunc.h"
#include <dt-bindings/clock/imx5-clock.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
/*
* The decompressor and also some bootloaders rely on a
* pre-existing /chosen node to be available to insert the
* command line and merge other ATAGS info.
* Also for U-Boot there must be a pre-existing /memory node.
*/
chosen {};
memory { device_type = "memory"; };
aliases {
ethernet0 = &fec;
gpio0 = &gpio1;
gpio1 = &gpio2;
gpio2 = &gpio3;
gpio3 = &gpio4;
gpio4 = &gpio5;
gpio5 = &gpio6;
gpio6 = &gpio7;
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
mmc0 = &esdhc1;
mmc1 = &esdhc2;
mmc2 = &esdhc3;
mmc3 = &esdhc4;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
spi0 = &ecspi1;
spi1 = &ecspi2;
spi2 = &cspi;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
clocks = <&clks IMX5_CLK_ARM>;
clock-latency = <61036>;
voltage-tolerance = <5>;
operating-points = <
/* kHz */
166666 850000
400000 900000
800000 1050000
1000000 1200000
1200000 1300000
>;
};
};
display-subsystem {
compatible = "fsl,imx-display-subsystem";
ports = <&ipu_di0>, <&ipu_di1>;
};
tzic: tz-interrupt-controller@fffc000 {
compatible = "fsl,imx53-tzic", "fsl,tzic";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x0fffc000 0x4000>;
};
clocks {
ckil {
compatible = "fsl,imx-ckil", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
ckih1 {
compatible = "fsl,imx-ckih1", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <22579200>;
};
ckih2 {
compatible = "fsl,imx-ckih2", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <0>;
};
osc {
compatible = "fsl,imx-osc", "fixed-clock";
#clock-cells = <0>;
clock-frequency = <24000000>;
};
};
pmu {
compatible = "arm,cortex-a8-pmu";
interrupt-parent = <&tzic>;
interrupts = <77>;
};
usbphy0: usbphy-0 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
clock-names = "main_clk";
#phy-cells = <0>;
status = "okay";
};
usbphy1: usbphy-1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
clock-names = "main_clk";
#phy-cells = <0>;
status = "okay";
};
soc {
#address-cells = <1>;
#size-cells = <1>;
compatible = "simple-bus";
interrupt-parent = <&tzic>;
ranges;
sata: sata@10000000 {
compatible = "fsl,imx53-ahci";
reg = <0x10000000 0x1000>;
interrupts = <28>;
clocks = <&clks IMX5_CLK_SATA_GATE>,
<&clks IMX5_CLK_SATA_REF>,
<&clks IMX5_CLK_AHB>;
clock-names = "sata", "sata_ref", "ahb";
status = "disabled";
};
ipu: ipu@18000000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ipu";
reg = <0x18000000 0x08000000>;
interrupts = <11 10>;
clocks = <&clks IMX5_CLK_IPU_GATE>,
<&clks IMX5_CLK_IPU_DI0_GATE>,
<&clks IMX5_CLK_IPU_DI1_GATE>;
clock-names = "bus", "di0", "di1";
resets = <&src 2>;
ipu_csi0: port@0 {
reg = <0>;
};
ipu_csi1: port@1 {
reg = <1>;
};
ipu_di0: port@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
ipu_di0_disp0: endpoint@0 {
reg = <0>;
};
ipu_di0_lvds0: endpoint@1 {
reg = <1>;
remote-endpoint = <&lvds0_in>;
};
};
ipu_di1: port@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
ipu_di1_disp1: endpoint@0 {
reg = <0>;
};
ipu_di1_lvds1: endpoint@1 {
reg = <1>;
remote-endpoint = <&lvds1_in>;
};
ipu_di1_tve: endpoint@2 {
reg = <2>;
remote-endpoint = <&tve_in>;
};
};
};
aips@50000000 { /* AIPS1 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x10000000>;
ranges;
spba@50000000 {
compatible = "fsl,spba-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x50000000 0x40000>;
ranges;
esdhc1: esdhc@50004000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50004000 0x4000>;
interrupts = <1>;
clocks = <&clks IMX5_CLK_ESDHC1_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC1_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc2: esdhc@50008000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50008000 0x4000>;
interrupts = <2>;
clocks = <&clks IMX5_CLK_ESDHC2_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC2_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
uart3: serial@5000c000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x5000c000 0x4000>;
interrupts = <33>;
clocks = <&clks IMX5_CLK_UART3_IPG_GATE>,
<&clks IMX5_CLK_UART3_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 42 4 0>, <&sdma 43 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
ecspi1: ecspi@50010000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x50010000 0x4000>;
interrupts = <36>;
clocks = <&clks IMX5_CLK_ECSPI1_IPG_GATE>,
<&clks IMX5_CLK_ECSPI1_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
ssi2: ssi@50014000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx53-ssi",
"fsl,imx51-ssi",
"fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
<&clks IMX5_CLK_SSI2_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
esdhc3: esdhc@50020000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50020000 0x4000>;
interrupts = <3>;
clocks = <&clks IMX5_CLK_ESDHC3_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC3_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
esdhc4: esdhc@50024000 {
compatible = "fsl,imx53-esdhc";
reg = <0x50024000 0x4000>;
interrupts = <4>;
clocks = <&clks IMX5_CLK_ESDHC4_IPG_GATE>,
<&clks IMX5_CLK_DUMMY>,
<&clks IMX5_CLK_ESDHC4_PER_GATE>;
clock-names = "ipg", "ahb", "per";
bus-width = <4>;
status = "disabled";
};
};
aipstz1: bridge@53f00000 {
compatible = "fsl,imx53-aipstz";
reg = <0x53f00000 0x60>;
};
usbotg: usb@53f80000 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80000 0x0200>;
interrupts = <18>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 0>;
fsl,usbphy = <&usbphy0>;
status = "disabled";
};
usbh1: usb@53f80200 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80200 0x0200>;
interrupts = <14>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 1>;
fsl,usbphy = <&usbphy1>;
dr_mode = "host";
status = "disabled";
};
usbh2: usb@53f80400 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80400 0x0200>;
interrupts = <16>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 2>;
dr_mode = "host";
status = "disabled";
};
usbh3: usb@53f80600 {
compatible = "fsl,imx53-usb", "fsl,imx27-usb";
reg = <0x53f80600 0x0200>;
interrupts = <17>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
fsl,usbmisc = <&usbmisc 3>;
dr_mode = "host";
status = "disabled";
};
usbmisc: usbmisc@53f80800 {
#index-cells = <1>;
compatible = "fsl,imx53-usbmisc";
reg = <0x53f80800 0x200>;
clocks = <&clks IMX5_CLK_USBOH3_GATE>;
};
gpio1: gpio@53f84000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f84000 0x4000>;
interrupts = <50 51>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@53f88000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f88000 0x4000>;
interrupts = <52 53>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@53f8c000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f8c000 0x4000>;
interrupts = <54 55>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@53f90000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53f90000 0x4000>;
interrupts = <56 57>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
kpp: kpp@53f94000 {
compatible = "fsl,imx53-kpp", "fsl,imx21-kpp";
reg = <0x53f94000 0x4000>;
interrupts = <60>;
clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
wdog1: wdog@53f98000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f98000 0x4000>;
interrupts = <58>;
clocks = <&clks IMX5_CLK_DUMMY>;
};
wdog2: wdog@53f9c000 {
compatible = "fsl,imx53-wdt", "fsl,imx21-wdt";
reg = <0x53f9c000 0x4000>;
interrupts = <59>;
clocks = <&clks IMX5_CLK_DUMMY>;
status = "disabled";
};
gpt: timer@53fa0000 {
compatible = "fsl,imx53-gpt", "fsl,imx31-gpt";
reg = <0x53fa0000 0x4000>;
interrupts = <39>;
clocks = <&clks IMX5_CLK_GPT_IPG_GATE>,
<&clks IMX5_CLK_GPT_HF_GATE>;
clock-names = "ipg", "per";
};
srtc: rtc@53fa4000 {
compatible = "fsl,imx53-rtc";
reg = <0x53fa4000 0x4000>;
interrupts = <24>;
clocks = <&clks IMX5_CLK_SRTC_GATE>;
};
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
};
gpr: iomuxc-gpr@53fa8000 {
compatible = "fsl,imx53-iomuxc-gpr", "syscon";
reg = <0x53fa8000 0xc>;
};
ldb: ldb@53fa8008 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ldb";
reg = <0x53fa8008 0x4>;
gpr = <&gpr>;
clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
<&clks IMX5_CLK_LDB_DI1_SEL>,
<&clks IMX5_CLK_IPU_DI0_SEL>,
<&clks IMX5_CLK_IPU_DI1_SEL>,
<&clks IMX5_CLK_LDB_DI0_GATE>,
<&clks IMX5_CLK_LDB_DI1_GATE>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel",
"di0", "di1";
status = "disabled";
lvds-channel@0 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
status = "disabled";
port@0 {
reg = <0>;
lvds0_in: endpoint {
remote-endpoint = <&ipu_di0_lvds0>;
};
};
port@2 {
reg = <2>;
};
};
lvds-channel@1 {
#address-cells = <1>;
#size-cells = <0>;
reg = <1>;
status = "disabled";
port@1 {
reg = <1>;
lvds1_in: endpoint {
remote-endpoint = <&ipu_di1_lvds1>;
};
};
port@2 {
reg = <2>;
};
};
};
pwm1: pwm@53fb4000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb4000 0x4000>;
clocks = <&clks IMX5_CLK_PWM1_IPG_GATE>,
<&clks IMX5_CLK_PWM1_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <61>;
};
pwm2: pwm@53fb8000 {
#pwm-cells = <2>;
compatible = "fsl,imx53-pwm", "fsl,imx27-pwm";
reg = <0x53fb8000 0x4000>;
clocks = <&clks IMX5_CLK_PWM2_IPG_GATE>,
<&clks IMX5_CLK_PWM2_HF_GATE>;
clock-names = "ipg", "per";
interrupts = <94>;
};
uart1: serial@53fbc000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fbc000 0x4000>;
interrupts = <31>;
clocks = <&clks IMX5_CLK_UART1_IPG_GATE>,
<&clks IMX5_CLK_UART1_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 18 4 0>, <&sdma 19 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
uart2: serial@53fc0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53fc0000 0x4000>;
interrupts = <32>;
clocks = <&clks IMX5_CLK_UART2_IPG_GATE>,
<&clks IMX5_CLK_UART2_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 12 4 0>, <&sdma 13 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
can1: can@53fc8000 {
compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
reg = <0x53fc8000 0x4000>;
interrupts = <82>;
clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>,
<&clks IMX5_CLK_CAN1_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
can2: can@53fcc000 {
compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
reg = <0x53fcc000 0x4000>;
interrupts = <83>;
clocks = <&clks IMX5_CLK_CAN2_IPG_GATE>,
<&clks IMX5_CLK_CAN2_SERIAL_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
src: src@53fd0000 {
compatible = "fsl,imx53-src", "fsl,imx51-src";
reg = <0x53fd0000 0x4000>;
#reset-cells = <1>;
};
clks: ccm@53fd4000{
compatible = "fsl,imx53-ccm";
reg = <0x53fd4000 0x4000>;
interrupts = <0 71 0x04 0 72 0x04>;
#clock-cells = <1>;
};
gpio5: gpio@53fdc000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fdc000 0x4000>;
interrupts = <103 104>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@53fe0000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fe0000 0x4000>;
interrupts = <105 106>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@53fe4000 {
compatible = "fsl,imx53-gpio", "fsl,imx35-gpio";
reg = <0x53fe4000 0x4000>;
interrupts = <107 108>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
i2c3: i2c@53fec000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x53fec000 0x4000>;
interrupts = <64>;
clocks = <&clks IMX5_CLK_I2C3_GATE>;
status = "disabled";
};
uart4: serial@53ff0000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x53ff0000 0x4000>;
interrupts = <13>;
clocks = <&clks IMX5_CLK_UART4_IPG_GATE>,
<&clks IMX5_CLK_UART4_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 2 4 0>, <&sdma 3 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
};
aips@60000000 { /* AIPS2 */
compatible = "fsl,aips-bus", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
reg = <0x60000000 0x10000000>;
ranges;
aipstz2: bridge@63f00000 {
compatible = "fsl,imx53-aipstz";
reg = <0x63f00000 0x60>;
};
iim: iim@63f98000 {
compatible = "fsl,imx53-iim", "fsl,imx27-iim";
reg = <0x63f98000 0x4000>;
interrupts = <69>;
clocks = <&clks IMX5_CLK_IIM_GATE>;
};
uart5: serial@63f90000 {
compatible = "fsl,imx53-uart", "fsl,imx21-uart";
reg = <0x63f90000 0x4000>;
interrupts = <86>;
clocks = <&clks IMX5_CLK_UART5_IPG_GATE>,
<&clks IMX5_CLK_UART5_PER_GATE>;
clock-names = "ipg", "per";
dmas = <&sdma 16 4 0>, <&sdma 17 4 0>;
dma-names = "rx", "tx";
status = "disabled";
};
owire: owire@63fa4000 {
compatible = "fsl,imx53-owire", "fsl,imx21-owire";
reg = <0x63fa4000 0x4000>;
clocks = <&clks IMX5_CLK_OWIRE_GATE>;
status = "disabled";
};
ecspi2: ecspi@63fac000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-ecspi", "fsl,imx51-ecspi";
reg = <0x63fac000 0x4000>;
interrupts = <37>;
clocks = <&clks IMX5_CLK_ECSPI2_IPG_GATE>,
<&clks IMX5_CLK_ECSPI2_PER_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
sdma: sdma@63fb0000 {
compatible = "fsl,imx53-sdma", "fsl,imx35-sdma";
reg = <0x63fb0000 0x4000>;
interrupts = <6>;
clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx53.bin";
};
cspi: cspi@63fc0000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
reg = <0x63fc0000 0x4000>;
interrupts = <38>;
clocks = <&clks IMX5_CLK_CSPI_IPG_GATE>,
<&clks IMX5_CLK_CSPI_IPG_GATE>;
clock-names = "ipg", "per";
status = "disabled";
};
i2c2: i2c@63fc4000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc4000 0x4000>;
interrupts = <63>;
clocks = <&clks IMX5_CLK_I2C2_GATE>;
status = "disabled";
};
i2c1: i2c@63fc8000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx53-i2c", "fsl,imx21-i2c";
reg = <0x63fc8000 0x4000>;
interrupts = <62>;
clocks = <&clks IMX5_CLK_I2C1_GATE>;
status = "disabled";
};
ssi1: ssi@63fcc000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
"fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
<&clks IMX5_CLK_SSI1_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
audmux: audmux@63fd0000 {
compatible = "fsl,imx53-audmux", "fsl,imx31-audmux";
reg = <0x63fd0000 0x4000>;
status = "disabled";
};
nfc: nand@63fdb000 {
compatible = "fsl,imx53-nand";
reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>;
interrupts = <8>;
clocks = <&clks IMX5_CLK_NFC_GATE>;
status = "disabled";
};
ssi3: ssi@63fe8000 {
#sound-dai-cells = <0>;
compatible = "fsl,imx53-ssi", "fsl,imx51-ssi",
"fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
<&clks IMX5_CLK_SSI3_ROOT_GATE>;
clock-names = "ipg", "baud";
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
fsl,fifo-depth = <15>;
status = "disabled";
};
fec: ethernet@63fec000 {
compatible = "fsl,imx53-fec", "fsl,imx25-fec";
reg = <0x63fec000 0x4000>;
interrupts = <87>;
clocks = <&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>,
<&clks IMX5_CLK_FEC_GATE>;
clock-names = "ipg", "ahb", "ptp";
status = "disabled";
};
tve: tve@63ff0000 {
compatible = "fsl,imx53-tve";
reg = <0x63ff0000 0x1000>;
interrupts = <92>;
clocks = <&clks IMX5_CLK_TVE_GATE>,
<&clks IMX5_CLK_IPU_DI1_SEL>;
clock-names = "tve", "di_sel";
status = "disabled";
port {
tve_in: endpoint {
remote-endpoint = <&ipu_di1_tve>;
};
};
};
vpu: vpu@63ff4000 {
compatible = "fsl,imx53-vpu", "cnm,coda7541";
reg = <0x63ff4000 0x1000>;
interrupts = <9>;
clocks = <&clks IMX5_CLK_VPU_REFERENCE_GATE>,
<&clks IMX5_CLK_VPU_GATE>;
clock-names = "per", "ahb";
resets = <&src 1>;
iram = <&ocram>;
};
sahara: crypto@63ff8000 {
compatible = "fsl,imx53-sahara";
reg = <0x63ff8000 0x4000>;
interrupts = <19 20>;
clocks = <&clks IMX5_CLK_SAHARA_IPG_GATE>,
<&clks IMX5_CLK_SAHARA_IPG_GATE>;
clock-names = "ipg", "ahb";
};
};
ocram: sram@f8000000 {
compatible = "mmio-sram";
reg = <0xf8000000 0x20000>;
clocks = <&clks IMX5_CLK_OCRAM>;
};
};
};