#
# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
#
# This file contains machine dependent kernel configuration notes. For
# machine independent notes, look in /sys/conf/NOTES.
#
# $FreeBSD$
#
#
# We want LINT to cover profiling as well.
profile 2
#
# Enable the kernel DTrace hooks which are required to load the DTrace
# kernel modules.
#
options KDTRACE_HOOKS
# DTrace core
# NOTE: introduces CDDL-licensed components into the kernel
#device dtrace
# DTrace modules
#device dtrace_profile
#device dtrace_sdt
#device dtrace_fbt
#device dtrace_systrace
#device dtrace_prototype
#device dtnfscl
#device dtmalloc
# Alternatively include all the DTrace modules
#device dtraceall
#####################################################################
# SMP OPTIONS:
#
# The apic device enables the use of the I/O APIC for interrupt delivery.
# The apic device can be used in both UP and SMP kernels, but is required
# for SMP kernels. Thus, the apic device is not strictly an SMP option,
# but it is a prerequisite for SMP.
#
# Notes:
#
# HTT CPUs should only be used if they are enabled in the BIOS. For
# the ACPI case, ACPI only correctly tells us about any HTT CPUs if
# they are enabled. However, most HTT systems do not list HTT CPUs
# in the MP Table if they are enabled, thus we guess at the HTT CPUs
# for the MP Table case. However, we shouldn't try to guess and use
# these CPUs if HTT is disabled. Thus, HTT guessing is only enabled
# for the MP Table if the user explicitly asks for it via the
# MPTABLE_FORCE_HTT option. Do NOT use this option if you have HTT
# disabled in your BIOS.
#
# IPI_PREEMPTION instructs the kernel to preempt threads running on other
# CPUS if needed. Relies on the PREEMPTION option
# Mandatory:
device apic # I/O apic
# Optional:
options MPTABLE_FORCE_HTT # Enable HTT CPUs with the MP Table
options IPI_PREEMPTION
#
# Watchdog routines.
#
options MP_WATCHDOG
# Debugging options.
#
options COUNT_XINVLTLB_HITS # Counters for TLB events
options COUNT_IPIS # Per-CPU IPI interrupt counters
#####################################################################
# CPU OPTIONS
#
# You must specify at least one CPU (the one you intend to run on);
# deleting the specification for CPUs you don't need to use may make
# parts of the system run faster.
#
cpu I486_CPU
cpu I586_CPU # aka Pentium(tm)
cpu I686_CPU # aka Pentium Pro(tm)
#
# Options for CPU features.
#
# CPU_ATHLON_SSE_HACK tries to enable SSE instructions when the BIOS has
# forgotten to enable them.
#
# CPU_BLUELIGHTNING_3X enables triple-clock mode on IBM Blue Lightning
# CPU if CPU supports it. The default is double-clock mode on
# BlueLightning CPU box.
#
# CPU_BLUELIGHTNING_FPU_OP_CACHE enables FPU operand cache on IBM
# BlueLightning CPU. It works only with Cyrix FPU, and this option
# should not be used with Intel FPU.
#
# CPU_BTB_EN enables branch target buffer on Cyrix 5x86 (NOTE 1).
#
# CPU_CYRIX_NO_LOCK enables weak locking for the entire address space
# of Cyrix 6x86 and 6x86MX CPUs by setting the NO_LOCK bit of CCR1.
# Otherwise, the NO_LOCK bit of CCR1 is cleared. (NOTE 3)
#
# CPU_DIRECT_MAPPED_CACHE sets L1 cache of Cyrix 486DLC CPU in direct
# mapped mode. Default is 2-way set associative mode.
#
# CPU_DISABLE_5X86_LSSER disables load store serialize (i.e., enables
# reorder). This option should not be used if you use memory mapped
# I/O device(s).
#
# CPU_ELAN enables support for AMDs ElanSC520 CPU.
# CPU_ELAN_PPS enables precision timestamp code.
# CPU_ELAN_XTAL sets the clock crystal frequency in Hz.
#
# CPU_ENABLE_LONGRUN enables support for Transmeta Crusoe LongRun
# technology which allows to restrict power consumption of the CPU by
# using group of hw.crusoe.* sysctls.
#
# CPU_FASTER_5X86_FPU enables faster FPU exception handler.
#
# CPU_GEODE is for the SC1100 Geode embedded processor. This option
# is necessary because the i8254 timecounter is toast.
#
# CPU_I486_ON_386 enables CPU cache on i486 based CPU upgrade products
# for i386 machines.
#
# CPU_IORT defines I/O clock delay time (NOTE 1). Default values of
# I/O clock delay time on Cyrix 5x86 and 6x86 are 0 and 7,respectively
# (no clock delay).
#
# CPU_L2_LATENCY specifies the L2 cache latency value. This option is used
# only when CPU_PPRO2CELERON is defined and Mendocino Celeron is detected.
# The default value is 5.
#
# CPU_LOOP_EN prevents flushing the prefetch buffer if the destination
# of a jump is already present in the prefetch buffer on Cyrix 5x86(NOTE
# 1).
#
# CPU_PPRO2CELERON enables L2 cache of Mendocino Celeron CPUs. This option
# is useful when you use Socket 8 to Socket 370 converter, because most Pentium
# Pro BIOSs do not enable L2 cache of Mendocino Celeron CPUs.
#
# CPU_RSTK_EN enables return stack on Cyrix 5x86 (NOTE 1).
#
# CPU_SOEKRIS enables support www.soekris.com hardware.
#
# CPU_SUSP_HLT enables suspend on HALT. If this option is set, CPU
# enters suspend mode following execution of HALT instruction.
#
# CPU_UPGRADE_HW_CACHE eliminates unneeded cache flush instruction(s).
#
# CPU_WT_ALLOC enables write allocation on Cyrix 6x86/6x86MX and AMD
# K5/K6/K6-2 CPUs.
#
# CYRIX_CACHE_WORKS enables CPU cache on Cyrix 486 CPUs with cache
# flush at hold state.
#
# CYRIX_CACHE_REALLY_WORKS enables (1) CPU cache on Cyrix 486 CPUs
# without cache flush at hold state, and (2) write-back CPU cache on
# Cyrix 6x86 whose revision < 2.7 (NOTE 2).
#
# NO_F00F_HACK disables the hack that prevents Pentiums (and ONLY
# Pentiums) from locking up when a LOCK CMPXCHG8B instruction is
# executed. This option is only needed if I586_CPU is also defined,
# and should be included for any non-Pentium CPU that defines it.
#
# NO_MEMORY_HOLE is an optimisation for systems with AMD K6 processors
# which indicates that the 15-16MB range is *definitely* not being
# occupied by an ISA memory hole.
#
# NOTE 1: The options, CPU_BTB_EN, CPU_LOOP_EN, CPU_IORT,
# CPU_LOOP_EN and CPU_RSTK_EN should not be used because of CPU bugs.
# These options may crash your system.
#
# NOTE 2: If CYRIX_CACHE_REALLY_WORKS is not set, CPU cache is enabled
# in write-through mode when revision < 2.7. If revision of Cyrix
# 6x86 >= 2.7, CPU cache is always enabled in write-back mode.
#
# NOTE 3: This option may cause failures for software that requires
# locked cycles in order to operate correctly.
#
options CPU_ATHLON_SSE_HACK
options CPU_BLUELIGHTNING_3X
options CPU_BLUELIGHTNING_FPU_OP_CACHE
options CPU_BTB_EN
options CPU_DIRECT_MAPPED_CACHE
options CPU_DISABLE_5X86_LSSER
options CPU_ELAN
options CPU_ELAN_PPS
options CPU_ELAN_XTAL=32768000
options CPU_ENABLE_LONGRUN
options CPU_FASTER_5X86_FPU
options CPU_GEODE
options CPU_I486_ON_386
options CPU_IORT
options CPU_L2_LATENCY=5
options CPU_LOOP_EN
options CPU_PPRO2CELERON
options CPU_RSTK_EN
options CPU_SOEKRIS
options CPU_SUSP_HLT
options CPU_UPGRADE_HW_CACHE
options CPU_WT_ALLOC
options CYRIX_CACHE_WORKS
options CYRIX_CACHE_REALLY_WORKS
#options NO_F00F_HACK
# Debug options
options NPX_DEBUG # enable npx debugging
#
# PERFMON causes the driver for Pentium/Pentium Pro performance counters
# to be compiled. See perfmon(4) for more information.
#
options PERFMON
#####################################################################
# NETWORKING OPTIONS
#
# DEVICE_POLLING adds support for mixed interrupt-polling handling
# of network device drivers, which has significant benefits in terms
# of robustness to overloads and responsivity, as well as permitting
# accurate scheduling of the CPU time between kernel network processing
# and other activities. The drawback is a moderate (up to 1/HZ seconds)
# potential increase in response times.
# It is strongly recommended to use HZ=1000 or 2000 with DEVICE_POLLING
# to achieve smoother behaviour.
# Additionally, you can enable/disable polling at runtime with help of
# the ifconfig(8) utility, and select the CPU fraction reserved to
# userland with the sysctl variable kern.polling.user_frac
# (default 50, range 0..100).
#
# Not all device drivers support this mode of operation at the time of
# this writing. See polling(4) for more details.
options DEVICE_POLLING
# BPF_JITTER adds support for BPF just-in-time compiler.
options BPF_JITTER
# OpenFabrics Enterprise Distribution (Infiniband).
options OFED
options OFED_DEBUG_INIT
# Sockets Direct Protocol
options SDP
options SDP_DEBUG
# IP over Infiniband
options IPOIB
options IPOIB_DEBUG
options IPOIB_CM
#####################################################################
# CLOCK OPTIONS
# Provide read/write access to the memory in the clock chip.
device nvram # Access to rtc cmos via /dev/nvram
#####################################################################
# MISCELLANEOUS DEVICES AND OPTIONS
device speaker #Play IBM BASIC-style noises out your speaker
hint.speaker.0.at="isa"
hint.speaker.0.port="0x61"
device gzip #Exec gzipped a.out's. REQUIRES COMPAT_AOUT!
device apm_saver # Requires APM
#####################################################################
# HARDWARE BUS CONFIGURATION
#
# ISA bus
#
device isa
#
# Options for `isa':
#
# AUTO_EOI_1 enables the `automatic EOI' feature for the master 8259A
# interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
# This option breaks suspend/resume on some portables.
#
# AUTO_EOI_2 enables the `automatic EOI' feature for the slave 8259A
# interrupt controller. This saves about 0.7-1.25 usec for each interrupt.
# Automatic EOI is documented not to work for for the slave with the
# original i8259A, but it works for some clones and some integrated
# versions.
#
# MAXMEM specifies the amount of RAM on the machine; if this is not
# specified, FreeBSD will first read the amount of memory from the CMOS
# RAM, so the amount of memory will initially be limited to 64MB or 16MB
# depending on the BIOS. If the BIOS reports 64MB, a memory probe will
# then attempt to detect the installed amount of RAM. If this probe
# fails to detect >64MB RAM you will have to use the MAXMEM option.
# The amount is in kilobytes, so for a machine with 128MB of RAM, it would
# be 131072 (128 * 1024).
#
# BROKEN_KEYBOARD_RESET disables the use of the keyboard controller to
# reset the CPU for reboot. This is needed on some systems with broken
# keyboard controllers.
options AUTO_EOI_1
#options AUTO_EOI_2
options MAXMEM=(128*1024)
#options BROKEN_KEYBOARD_RESET
#
# AGP GART support
device agp
# AGP debugging.
options AGP_DEBUG
#####################################################################
# HARDWARE DEVICE CONFIGURATION
# To include support for VGA VESA video modes
options VESA
# Turn on extra debugging checks and output for VESA support.
options VESA_DEBUG
device dpms # DPMS suspend & resume via VESA BIOS
# x86 real mode BIOS emulator, required by atkbdc/dpms/vesa
options X86BIOS
#
# Hints for the non-optional Numeric Processing eXtension driver.
hint.npx.0.flags="0x0"
hint.npx.0.irq="13"
#
# `flags' for npx0:
# 0x01 don't use the npx registers to optimize bcopy.
# 0x02 don't use the npx registers to optimize bzero.
# 0x04 don't use the npx registers to optimize copyin or copyout.
# The npx registers are normally used to optimize copying and zeroing when
# all of the following conditions are satisfied:
# I586_CPU is an option
# the cpu is an i586 (perhaps not a Pentium)
# the probe for npx0 succeeds
# INT 16 exception handling works.
# Then copying and zeroing using the npx registers is normally 30-100% faster.
# The flags can be used to control cases where it doesn't work or is slower.
# Setting them at boot time using hints works right (the optimizations
# are not used until later in the bootstrap when npx0 is attached).
# Flag 0x08 automatically disables the i586 optimized routines.
#
#
# Optional devices:
#
# PS/2 mouse
device psm
hint.psm.0.at="atkbdc"
hint.psm.0.irq="12"
# Options for psm:
options PSM_HOOKRESUME #hook the system resume event, useful
#for some laptops
options PSM_RESETAFTERSUSPEND #reset the device at the resume event
# The keyboard controller; it controls the keyboard and the PS/2 mouse.
device atkbdc
hint.atkbdc.0.at="isa"
hint.atkbdc.0.port="0x060"
# The AT keyboard
device atkbd
hint.atkbd.0.at="atkbdc"
hint.atkbd.0.irq="1"
# Options for atkbd:
options ATKBD_DFLT_KEYMAP # specify the built-in keymap
makeoptions ATKBD_DFLT_KEYMAP=fr.dvorak
# `flags' for atkbd:
# 0x01 Force detection of keyboard, else we always assume a keyboard
# 0x02 Don't reset keyboard, useful for some newer ThinkPads
# 0x03 Force detection and avoid reset, might help with certain
# dockingstations
# 0x04 Old-style (XT) keyboard support, useful for older ThinkPads
# Video card driver for VGA adapters.
device vga
hint.vga.0.at="isa"
# Options for vga:
# Try the following option if the mouse pointer is not drawn correctly
# or font does not seem to be loaded properly. May cause flicker on
# some systems.
options VGA_ALT_SEQACCESS
# If you can dispense with some vga driver features, you may want to
# use the following options to save some memory.
#options VGA_NO_FONT_LOADING # don't save/load font
#options VGA_NO_MODE_CHANGE # don't change video modes
# Older video cards may require this option for proper operation.
options VGA_SLOW_IOACCESS # do byte-wide i/o's to TS and GDC regs
# The following option probably won't work with the LCD displays.
options VGA_WIDTH90 # support 90 column modes
# Debugging.
options VGA_DEBUG
# vt(4) drivers.
device vt_vga
# Linear framebuffer driver for S3 VESA 1.2 cards. Works on top of VESA.
device s3pci
# 3Dfx Voodoo Graphics, Voodoo II /dev/3dfx CDEV support. This will create
# the /dev/3dfx0 device to work with glide implementations. This should get
# linked to /dev/3dfx and /dev/voodoo. Note that this is not the same as
# the tdfx DRI module from XFree86 and is completely unrelated.
#
# To enable Linuxulator support, one must also include COMPAT_LINUX in the
# config as well. The other option is to load both as modules.
device tdfx # Enable 3Dfx Voodoo support
device tdfx_linux # Enable Linuxulator support
#
# ACPI support using the Intel ACPI Component Architecture reference
# implementation.
#
# ACPI_DEBUG enables the use of the debug.acpi.level and debug.acpi.layer
# kernel environment variables to select initial debugging levels for the
# Intel ACPICA code. (Note that the Intel code must also have USE_DEBUGGER
# defined when it is built).
device acpi
options ACPI_DEBUG
options ACPI_DMAR
# ACPI WMI Mapping driver
device acpi_wmi
# ACPI Asus Extras (LCD backlight/brightness, video output, etc.)
device acpi_asus
# ACPI Fujitsu Extras (Buttons)
device acpi_fujitsu
# ACPI extras driver for HP laptops
device acpi_hp
# ACPI extras driver for IBM laptops
device acpi_ibm
# ACPI Panasonic Extras (LCD backlight/brightness, video output, etc.)
device acpi_panasonic
# ACPI Sony extra (LCD brightness)
device acpi_sony
# ACPI Toshiba Extras (LCD backlight/brightness, video output, etc.)
device acpi_toshiba
# ACPI Video Extensions (LCD backlight/brightness, video output, etc.)
device acpi_video
# ACPI Docking Station
device acpi_dock
# ACPI ASOC ATK0110 ASUSTeK AI Booster (voltage, temperature and fan sensors)
device aibs
# The cpufreq(4) driver provides support for non-ACPI CPU frequency control
device cpufreq
# Direct Rendering modules for 3D acceleration.
device drm # DRM core module required by DRM drivers
device mach64drm # ATI Rage Pro, Rage Mobility P/M, Rage XL
device mgadrm # AGP Matrox G200, G400, G450, G550
device r128drm # ATI Rage 128
device savagedrm # S3 Savage3D, Savage4
device sisdrm # SiS 300/305, 540, 630
device tdfxdrm # 3dfx Voodoo 3/4/5 and Banshee
device viadrm # VIA
options DRM_DEBUG # Include debug printfs (slow)
#
# mse: Logitech and ATI InPort bus mouse ports
device mse
hint.mse.0.at="isa"
hint.mse.0.port="0x23c"
hint.mse.0.irq="5"
#
# Network interfaces:
#
# bxe: Broadcom NetXtreme II (BCM5771X/BCM578XX) PCIe 10Gb Ethernet
# adapters.
# ce: Cronyx Tau-PCI/32 sync single/dual port G.703/E1 serial adaptor
# with 32 HDLC subchannels (requires sppp (default), or NETGRAPH if
# NETGRAPH_CRONYX is configured)
# cp: Cronyx Tau-PCI sync single/dual/four port
# V.35/RS-232/RS-530/RS-449/X.21/G.703/E1/E3/T3/STS-1
# serial adaptor (requires sppp (default), or NETGRAPH if
# NETGRAPH_CRONYX is configured)
# cs: IBM Etherjet and other Crystal Semi CS89x0-based adapters
# ctau: Cronyx Tau sync dual port V.35/RS-232/RS-530/RS-449/X.21/G.703/E1
# serial adaptor (requires sppp (default), or NETGRAPH if
# NETGRAPH_CRONYX is configured)
# ed: Western Digital and SMC 80xx; Novell NE1000 and NE2000; 3Com 3C503
# HP PC Lan+, various PC Card devices
# (requires miibus)
# ipw: Intel PRO/Wireless 2100 IEEE 802.11 adapter
# iwi: Intel PRO/Wireless 2200BG/2225BG/2915ABG IEEE 802.11 adapters
# Requires the iwi firmware module
# iwn: Intel Wireless WiFi Link 1000/105/135/2000/4965/5000/6000/6050 abgn
# 802.11 network adapters
# Requires the iwn firmware module
# mthca: Mellanox HCA InfiniBand
# mlx4ib: Mellanox ConnectX HCA InfiniBand
# mlx4en: Mellanox ConnectX HCA Ethernet
# nfe: nVidia nForce MCP on-board Ethernet Networking (BSD open source)
# sbni: Granch SBNI12-xx ISA and PCI adapters
# vmx: VMware VMXNET3 Ethernet (BSD open source)
# wpi: Intel 3945ABG Wireless LAN controller
# Requires the wpi firmware module
# Order for ISA/EISA devices is important here
device bxe # Broadcom NetXtreme II BCM5771X/BCM578XX 10GbE
device ce
device cp
device cs # Crystal Semiconductor CS89x0 NIC
hint.cs.0.at="isa"
hint.cs.0.port="0x300"
device ctau
hint.ctau.0.at="isa"
hint.ctau.0.port="0x240"
hint.ctau.0.irq="15"
hint.ctau.0.drq="7"
#options NETGRAPH_CRONYX # Enable NETGRAPH support for Cronyx adapter(s)
device ed # NE[12]000, SMC Ultra, 3c503, DS8390 cards
options ED_3C503
options ED_HPP
options ED_SIC
hint.ed.0.at="isa"
hint.ed.0.port="0x280"
hint.ed.0.irq="5"
hint.ed.0.maddr="0xd8000"
device ipw # Intel 2100 wireless NICs.
device iwi # Intel 2200BG/2225BG/2915ABG wireless NICs.
device iwn # Intel 4965/1000/5000/6000 wireless NICs.
# Hint for the i386-only ISA front-end of le(4).
hint.le.0.at="isa"
hint.le.0.port="0x280"
hint.le.0.irq="10"
hint.le.0.drq="0"
device mthca # Mellanox HCA InfiniBand
device mlx4 # Shared code module between IB and Ethernet
device mlx4ib # Mellanox ConnectX HCA InfiniBand
device mlx4en # Mellanox ConnectX HCA Ethernet
device nfe # nVidia nForce MCP on-board Ethernet
device sbni
hint.sbni.0.at="isa"
hint.sbni.0.port="0x210"
hint.sbni.0.irq="0xefdead"
hint.sbni.0.flags="0"
device vmx # VMware VMXNET3 Ethernet
device wpi # Intel 3945ABG wireless NICs.
# IEEE 802.11 adapter firmware modules
# Intel PRO/Wireless 2100 firmware:
# ipwfw: BSS/IBSS/monitor mode firmware
# ipwbssfw: BSS mode firmware
# ipwibssfw: IBSS mode firmware
# ipwmonitorfw: Monitor mode firmware
# Intel PRO/Wireless 2200BG/2225BG/2915ABG firmware:
# iwifw: BSS/IBSS/monitor mode firmware
# iwibssfw: BSS mode firmware
# iwiibssfw: IBSS mode firmware
# iwimonitorfw: Monitor mode firmware
# Intel Wireless WiFi Link 4965/1000/5000/6000 series firmware:
# iwnfw: Single module to support all devices
# iwn1000fw: Specific module for the 1000 only
# iwn105fw: Specific module for the 105 only
# iwn135fw: Specific module for the 135 only
# iwn2000fw: Specific module for the 2000 only
# iwn2030fw: Specific module for the 2030 only
# iwn4965fw: Specific module for the 4965 only
# iwn5000fw: Specific module for the 5000 only
# iwn5150fw: Specific module for the 5150 only
# iwn6000fw: Specific module for the 6000 only
# iwn6000g2afw: Specific module for the 6000g2a only
# iwn6000g2bfw: Specific module for the 6000g2b only
# iwn6050fw: Specific module for the 6050 only
# wpifw: Intel 3945ABG Wireless LAN Controller firmware
device iwifw
device iwibssfw
device iwiibssfw
device iwimonitorfw
device ipwfw
device ipwbssfw
device ipwibssfw
device ipwmonitorfw
device iwnfw
device iwn1000fw
device iwn105fw
device iwn135fw
device iwn2000fw
device iwn2030fw
device iwn4965fw
device iwn5000fw
device iwn5150fw
device iwn6000fw
device iwn6000g2afw
device iwn6000g2bfw
device iwn6050fw
device wpifw
#
# Non-Transparent Bridge (NTB) drivers
#
device if_ntb # Virtual NTB network interface
device ntb_transport # NTB packet transport driver
device ntb # NTB hardware interface
device ntb_hw_intel # Intel NTB hardware driver
device ntb_hw_plx # PLX NTB hardware driver
#
# ATA raid adapters
#
device pst
#
# Areca 11xx and 12xx series of SATA II RAID controllers.
# CAM is required.
#
device arcmsr # Areca SATA II RAID
#
# 3ware 9000 series PATA/SATA RAID controller driver and options.
# The driver is implemented as a SIM, and so, needs the CAM infrastructure.
#
options TWA_DEBUG # 0-10; 10 prints the most messages.
device twa # 3ware 9000 series PATA/SATA RAID
#
# SCSI host adapters:
#
# ncv: NCR 53C500 based SCSI host adapters.
# nsp: Workbit Ninja SCSI-3 based PC Card SCSI host adapters.
# stg: TMC 18C30, 18C50 based SCSI host adapters.
device ncv
device nsp
device stg
hint.stg.0.at="isa"
hint.stg.0.port="0x140"
hint.stg.0.port="11"
#
# Adaptec FSA RAID controllers, including integrated DELL controllers,
# the Dell PERC 2/QC and the HP NetRAID-4M
device aac
device aacp # SCSI Passthrough interface (optional, CAM required)
#
# Adaptec by PMC RAID controllers, Series 6/7/8 and upcoming families
device aacraid # Container interface, CAM required
#
# Highpoint RocketRAID 27xx.
device hpt27xx
#
# Highpoint RocketRAID 182x.
device hptmv
#
# Highpoint DC7280 and R750.
device hptnr
#
# Highpoint RocketRAID. Supports RR172x, RR222x, RR2240, RR232x, RR2340,
# RR2210, RR174x, RR2522, RR231x, RR230x.
device hptrr
#
# Highpoint RocketRaid 3xxx series SATA RAID
device hptiop
#
# Intel integrated Memory Controller (iMC) SMBus controller
# Sandybridge-Xeon, Ivybridge-Xeon, Haswell-Xeon, Broadwell-Xeon
device imcsmb
#
# IBM (now Adaptec) ServeRAID controllers
device ips
#
# Intel C600 (Patsburg) integrated SAS controller
device isci
options ISCI_LOGGING # enable debugging in isci HAL
#
# NVM Express (NVMe) support
device nvme # base NVMe driver
device nvd # expose NVMe namespaces as disks, depends on nvme
#
# PMC-Sierra SAS/SATA controller
device pmspcv
#
# SafeNet crypto driver: can be moved to the MI NOTES as soon as
# it's tested on a big-endian machine
#
device safe # SafeNet 1141
options SAFE_DEBUG # enable debugging support: hw.safe.debug
options SAFE_RNDTEST # enable rndtest support
#
# glxiic is an I2C driver for the AMD Geode LX CS5536 System Management Bus
# controller. Requires 'device iicbus'.
#
device glxiic # AMD Geode LX CS5536 System Management Bus
#
# glxsb is a driver for the Security Block in AMD Geode LX processors.
# Requires 'device crypto'.
#
device glxsb # AMD Geode LX Security Block
#
# VirtIO support
#
# The virtio entry provides a generic bus for use by the device drivers.
# It must be combined with an interface that communicates with the host.
# Multiple such interfaces defined by the VirtIO specification. FreeBSD
# only has support for PCI. Therefore, virtio_pci must be statically
# compiled in or loaded as a module for the device drivers to function.
#
device virtio # Generic VirtIO bus (required)
device virtio_pci # VirtIO PCI Interface
device vtnet # VirtIO Ethernet device
device virtio_blk # VirtIO Block device
device virtio_scsi # VirtIO SCSI device
device virtio_balloon # VirtIO Memory Balloon device
device virtio_random # VirtIO Entropy device
device virtio_console # VirtIO Console device
device hyperv # HyperV drivers
#####################################################################
#
# Miscellaneous hardware:
#
# apm: Laptop Advanced Power Management (experimental)
# ipmi: Intelligent Platform Management Interface
# smapi: System Management Application Program Interface driver
# smbios: DMI/SMBIOS entry point
# vpd: Vital Product Data kernel interface
# pbio: Parallel (8255 PPI) basic I/O (mode 0) port (e.g. Advantech PCL-724)
# asmc: Apple System Management Controller
# si: Specialix International SI/XIO or SX intelligent serial card driver
# tpm: Trusted Platform Module
# Notes on APM
# The flags takes the following meaning for apm0:
# 0x0020 Statclock is broken.
# Notes on the Specialix SI/XIO driver:
# The host card is memory, not IO mapped.
# The Rev 1 host cards use a 64K chunk, on a 32K boundary.
# The Rev 2 host cards use a 32K chunk, on a 32K boundary.
# The cards can use an IRQ of 11, 12 or 15.
# Notes on the Sony Programmable I/O controller
# This is a temporary driver that should someday be replaced by something
# that hooks into the ACPI layer. The device is hooked to the PIIX4's
# General Device 10 decoder, which means you have to fiddle with PCI
# registers to map it in, even though it is otherwise treated here as
# an ISA device. At the moment, the driver polls, although the device
# is capable of generating interrupts. It largely undocumented.
# The port location in the hint is where you WANT the device to be
# mapped. 0x10a0 seems to be traditional. At the moment the jogdial
# is the only thing truly supported, but apparently a fair percentage
# of the Vaio extra features are controlled by this device.
device apm
hint.apm.0.flags="0x20"
device ipmi
device smapi
device smbios
device vpd
device pbio
hint.pbio.0.at="isa"
hint.pbio.0.port="0x360"
device asmc
device tpm
device padlock_rng # VIA Padlock RNG
device rdrand_rng # Intel Bull Mountain RNG
device aesni # AES-NI OpenCrypto module
#
# Laptop/Notebook options:
#
# See also:
# apm under `Miscellaneous hardware'
# above.
# For older notebooks that signal a powerfail condition (external
# power supply dropped, or battery state low) by issuing an NMI:
options POWERFAIL_NMI # make it beep instead of panicing
#
# I2C Bus
#
# Philips i2c bus support is provided by the `iicbus' device.
#
# Supported interfaces:
# pcf Philips PCF8584 ISA-bus controller
#
device pcf
hint.pcf.0.at="isa"
hint.pcf.0.port="0x320"
hint.pcf.0.irq="5"
#
# Hardware watchdog timers:
#
# ichwd: Intel ICH watchdog timer
# amdsbwd: AMD SB7xx watchdog timer
# viawd: VIA south bridge watchdog timer
# wbwd: Winbond watchdog timer
#
device ichwd
device amdsbwd
device viawd
device wbwd
#
# Temperature sensors:
#
# coretemp: on-die sensor on Intel Core and newer CPUs
# amdtemp: on-die sensor on AMD K8/K10/K11 CPUs
#
device coretemp
device amdtemp
#
# CPU control pseudo-device. Provides access to MSRs, CPUID info and
# microcode update feature.
#
device cpuctl
#
# System Management Bus (SMB)
#
options ENABLE_ALART # Control alarm on Intel intpm driver
#
# Set the number of PV entries per process. Increasing this can
# stop panics related to heavy use of shared memory. However, that can
# (combined with large amounts of physical memory) cause panics at
# boot time due the kernel running out of VM space.
#
# If you're tweaking this, you might also want to increase the sysctls
# "vm.v_free_min", "vm.v_free_reserved", and "vm.v_free_target".
#
# The value below is the one more than the default.
#
options PMAP_SHPGPERPROC=201
#
# Number of initial kernel page table pages used for early bootstrap.
# This number should include enough pages to map the kernel, any
# modules or other data loaded with the kernel by the loader, and data
# structures allocated before the VM system is initialized such as the
# vm_page_t array. Each page table page maps 4MB (2MB with PAE).
#
options NKPT=31
#####################################################################
# ABI Emulation
# Enable iBCS2 runtime support for SCO and ISC binaries
#options IBCS2
# Emulate spx device for client side of SVR3 local X interface
options SPX_HACK
# Enable (32-bit) a.out binary support
options COMPAT_AOUT
# Enable 32-bit runtime support for CloudABI binaries.
options COMPAT_CLOUDABI32
# Enable Linux ABI emulation
options COMPAT_LINUX
# Enable the linux-like proc filesystem support (requires COMPAT_LINUX
# and PSEUDOFS)
options LINPROCFS
#Enable the linux-like sys filesystem support (requires COMPAT_LINUX
# and PSEUDOFS)
options LINSYSFS
# Enable NDIS binary driver support
options NDISAPI
device ndis
#####################################################################
# VM OPTIONS
# KSTACK_PAGES is the number of memory pages to assign to the kernel
# stack of each thread.
options KSTACK_PAGES=5
# Enable detailed accounting by the PV entry allocator.
options PV_STATS
#####################################################################
# More undocumented options for linting.
# Note that documenting these are not considered an affront.
options FB_INSTALL_CDEV # install a CDEV entry in /dev
options I586_PMC_GUPROF=0x70000
options KBDIO_DEBUG=2
options KBD_MAXRETRY=4
options KBD_MAXWAIT=6
options KBD_RESETDELAY=201
options PSM_DEBUG=1
options TIMER_FREQ=((14318182+6)/12)
options VM_KMEM_SIZE
options VM_KMEM_SIZE_MAX
options VM_KMEM_SIZE_SCALE