/*
* Derived from crc32c.c version 1.1 by Mark Adler.
*
* Copyright (C) 2013 Mark Adler
*
* This software is provided 'as-is', without any express or implied warranty.
* In no event will the author be held liable for any damages arising from the
* use of this software.
*
* Permission is granted to anyone to use this software for any purpose,
* including commercial applications, and to alter it and redistribute it
* freely, subject to the following restrictions:
*
* 1. The origin of this software must not be misrepresented; you must not
* claim that you wrote the original software. If you use this software
* in a product, an acknowledgment in the product documentation would be
* appreciated but is not required.
* 2. Altered source versions must be plainly marked as such, and must not be
* misrepresented as being the original software.
* 3. This notice may not be removed or altered from any source distribution.
*
* Mark Adler
* madler@alumni.caltech.edu
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* This file is compiled in userspace in order to run ATF unit tests.
*/
#ifdef USERSPACE_TESTING
#include <stdint.h>
#include <stdlib.h>
#else
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#endif
static __inline uint32_t
_mm_crc32_u8(uint32_t x, uint8_t y)
{
/*
* clang (at least 3.9.[0-1]) pessimizes "rm" (y) and "m" (y)
* significantly and "r" (y) a lot by copying y to a different
* local variable (on the stack or in a register), so only use
* the latter. This costs a register and an instruction but
* not a uop.
*/
__asm("crc32b %1,%0" : "+r" (x) : "r" (y));
return (x);
}
#ifdef __amd64__
static __inline uint64_t
_mm_crc32_u64(uint64_t x, uint64_t y)
{
__asm("crc32q %1,%0" : "+r" (x) : "r" (y));
return (x);
}
#else
static __inline uint32_t
_mm_crc32_u32(uint32_t x, uint32_t y)
{
__asm("crc32l %1,%0" : "+r" (x) : "r" (y));
return (x);
}
#endif
/* CRC-32C (iSCSI) polynomial in reversed bit order. */
#define POLY 0x82f63b78
/*
* Block sizes for three-way parallel crc computation. LONG and SHORT must
* both be powers of two.
*/
#define LONG 128
#define SHORT 64
/*
* Tables for updating a crc for LONG, 2 * LONG, SHORT and 2 * SHORT bytes
* of value 0 later in the input stream, in the same way that the hardware
* would, but in software without calculating intermediate steps.
*/
static uint32_t crc32c_long[4][256];
static uint32_t crc32c_2long[4][256];
static uint32_t crc32c_short[4][256];
static uint32_t crc32c_2short[4][256];
/*
* Multiply a matrix times a vector over the Galois field of two elements,
* GF(2). Each element is a bit in an unsigned integer. mat must have at
* least as many entries as the power of two for most significant one bit in
* vec.
*/
static inline uint32_t
gf2_matrix_times(uint32_t *mat, uint32_t vec)
{
uint32_t sum;
sum = 0;
while (vec) {
if (vec & 1)
sum ^= *mat;
vec >>= 1;
mat++;
}
return (sum);
}
/*
* Multiply a matrix by itself over GF(2). Both mat and square must have 32
* rows.
*/
static inline void
gf2_matrix_square(uint32_t *square, uint32_t *mat)
{
int n;
for (n = 0; n < 32; n++)
square[n] = gf2_matrix_times(mat, mat[n]);
}
/*
* Construct an operator to apply len zeros to a crc. len must be a power of
* two. If len is not a power of two, then the result is the same as for the
* largest power of two less than len. The result for len == 0 is the same as
* for len == 1. A version of this routine could be easily written for any
* len, but that is not needed for this application.
*/
static void
crc32c_zeros_op(uint32_t *even, size_t len)
{
uint32_t odd[32]; /* odd-power-of-two zeros operator */
uint32_t row;
int n;
/* put operator for one zero bit in odd */
odd[0] = POLY; /* CRC-32C polynomial */
row = 1;
for (n = 1; n < 32; n++) {
odd[n] = row;
row <<= 1;
}
/* put operator for two zero bits in even */
gf2_matrix_square(even, odd);
/* put operator for four zero bits in odd */
gf2_matrix_square(odd, even);
/*
* first square will put the operator for one zero byte (eight zero
* bits), in even -- next square puts operator for two zero bytes in
* odd, and so on, until len has been rotated down to zero
*/
do {
gf2_matrix_square(even, odd);
len >>= 1;
if (len == 0)
return;
gf2_matrix_square(odd, even);
len >>= 1;
} while (len);
/* answer ended up in odd -- copy to even */
for (n = 0; n < 32; n++)
even[n] = odd[n];
}
/*
* Take a length and build four lookup tables for applying the zeros operator
* for that length, byte-by-byte on the operand.
*/
static void
crc32c_zeros(uint32_t zeros[][256], size_t len)
{
uint32_t op[32];
uint32_t n;
crc32c_zeros_op(op, len);
for (n = 0; n < 256; n++) {
zeros[0][n] = gf2_matrix_times(op, n);
zeros[1][n] = gf2_matrix_times(op, n << 8);
zeros[2][n] = gf2_matrix_times(op, n << 16);
zeros[3][n] = gf2_matrix_times(op, n << 24);
}
}
/* Apply the zeros operator table to crc. */
static inline uint32_t
crc32c_shift(uint32_t zeros[][256], uint32_t crc)
{
return (zeros[0][crc & 0xff] ^ zeros[1][(crc >> 8) & 0xff] ^
zeros[2][(crc >> 16) & 0xff] ^ zeros[3][crc >> 24]);
}
/* Initialize tables for shifting crcs. */
static void
#ifdef USERSPACE_TESTING
__attribute__((__constructor__))
#endif
crc32c_init_hw(void)
{
crc32c_zeros(crc32c_long, LONG);
crc32c_zeros(crc32c_2long, 2 * LONG);
crc32c_zeros(crc32c_short, SHORT);
crc32c_zeros(crc32c_2short, 2 * SHORT);
}
#ifdef _KERNEL
SYSINIT(crc32c_sse42, SI_SUB_LOCK, SI_ORDER_ANY, crc32c_init_hw, NULL);
#endif
/* Compute CRC-32C using the Intel hardware instruction. */
#ifdef USERSPACE_TESTING
uint32_t sse42_crc32c(uint32_t, const unsigned char *, unsigned);
#endif
uint32_t
sse42_crc32c(uint32_t crc, const unsigned char *buf, unsigned len)
{
#ifdef __amd64__
const size_t align = 8;
#else
const size_t align = 4;
#endif
const unsigned char *next, *end;
#ifdef __amd64__
uint64_t crc0, crc1, crc2;
#else
uint32_t crc0, crc1, crc2;
#endif
next = buf;
crc0 = crc;
/* Compute the crc to bring the data pointer to an aligned boundary. */
while (len && ((uintptr_t)next & (align - 1)) != 0) {
crc0 = _mm_crc32_u8(crc0, *next);
next++;
len--;
}
#if LONG > SHORT
/*
* Compute the crc on sets of LONG*3 bytes, executing three independent
* crc instructions, each on LONG bytes -- this is optimized for the
* Nehalem, Westmere, Sandy Bridge, and Ivy Bridge architectures, which
* have a throughput of one crc per cycle, but a latency of three
* cycles.
*/
crc = 0;
while (len >= LONG * 3) {
crc1 = 0;
crc2 = 0;
end = next + LONG;
do {
#ifdef __amd64__
crc0 = _mm_crc32_u64(crc0, *(const uint64_t *)next);
crc1 = _mm_crc32_u64(crc1,
*(const uint64_t *)(next + LONG));
crc2 = _mm_crc32_u64(crc2,
*(const uint64_t *)(next + (LONG * 2)));
#else
crc0 = _mm_crc32_u32(crc0, *(const uint32_t *)next);
crc1 = _mm_crc32_u32(crc1,
*(const uint32_t *)(next + LONG));
crc2 = _mm_crc32_u32(crc2,
*(const uint32_t *)(next + (LONG * 2)));
#endif
next += align;
} while (next < end);
/*-
* Update the crc. Try to do it in parallel with the inner
* loop. 'crc' is used to accumulate crc0 and crc1
* produced by the inner loop so that the next iteration
* of the loop doesn't depend on anything except crc2.
*
* The full expression for the update is:
* crc = S*S*S*crc + S*S*crc0 + S*crc1
* where the terms are polynomials modulo the CRC polynomial.
* We regroup this subtly as:
* crc = S*S * (S*crc + crc0) + S*crc1.
* This has an extra dependency which reduces possible
* parallelism for the expression, but it turns out to be
* best to intentionally delay evaluation of this expression
* so that it competes less with the inner loop.
*
* We also intentionally reduce parallelism by feedng back
* crc2 to the inner loop as crc0 instead of accumulating
* it in crc. This synchronizes the loop with crc update.
* CPU and/or compiler schedulers produced bad order without
* this.
*
* Shifts take about 12 cycles each, so 3 here with 2
* parallelizable take about 24 cycles and the crc update
* takes slightly longer. 8 dependent crc32 instructions
* can run in 24 cycles, so the 3-way blocking is worse
* than useless for sizes less than 8 * <word size> = 64
* on amd64. In practice, SHORT = 32 confirms these
* timing calculations by giving a small improvement
* starting at size 96. Then the inner loop takes about
* 12 cycles and the crc update about 24, but these are
* partly in parallel so the total time is less than the
* 36 cycles that 12 dependent crc32 instructions would
* take.
*
* To have a chance of completely hiding the overhead for
* the crc update, the inner loop must take considerably
* longer than 24 cycles. LONG = 64 makes the inner loop
* take about 24 cycles, so is not quite large enough.
* LONG = 128 works OK. Unhideable overheads are about
* 12 cycles per inner loop. All assuming timing like
* Haswell.
*/
crc = crc32c_shift(crc32c_long, crc) ^ crc0;
crc1 = crc32c_shift(crc32c_long, crc1);
crc = crc32c_shift(crc32c_2long, crc) ^ crc1;
crc0 = crc2;
next += LONG * 2;
len -= LONG * 3;
}
crc0 ^= crc;
#endif /* LONG > SHORT */
/*
* Do the same thing, but now on SHORT*3 blocks for the remaining data
* less than a LONG*3 block
*/
crc = 0;
while (len >= SHORT * 3) {
crc1 = 0;
crc2 = 0;
end = next + SHORT;
do {
#ifdef __amd64__
crc0 = _mm_crc32_u64(crc0, *(const uint64_t *)next);
crc1 = _mm_crc32_u64(crc1,
*(const uint64_t *)(next + SHORT));
crc2 = _mm_crc32_u64(crc2,
*(const uint64_t *)(next + (SHORT * 2)));
#else
crc0 = _mm_crc32_u32(crc0, *(const uint32_t *)next);
crc1 = _mm_crc32_u32(crc1,
*(const uint32_t *)(next + SHORT));
crc2 = _mm_crc32_u32(crc2,
*(const uint32_t *)(next + (SHORT * 2)));
#endif
next += align;
} while (next < end);
crc = crc32c_shift(crc32c_short, crc) ^ crc0;
crc1 = crc32c_shift(crc32c_short, crc1);
crc = crc32c_shift(crc32c_2short, crc) ^ crc1;
crc0 = crc2;
next += SHORT * 2;
len -= SHORT * 3;
}
crc0 ^= crc;
/* Compute the crc on the remaining bytes at native word size. */
end = next + (len - (len & (align - 1)));
while (next < end) {
#ifdef __amd64__
crc0 = _mm_crc32_u64(crc0, *(const uint64_t *)next);
#else
crc0 = _mm_crc32_u32(crc0, *(const uint32_t *)next);
#endif
next += align;
}
len &= (align - 1);
/* Compute the crc for any trailing bytes. */
while (len) {
crc0 = _mm_crc32_u8(crc0, *next);
next++;
len--;
}
return ((uint32_t)crc0);
}