/*- * SPDX-License-Identifier: BSD-2-Clause * * Copyright (c) 2004 Jason L. Wright (jason@thought.net) * Copyright (c) 2006 Marius Strobl <marius@FreeBSD.org> * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright * notice, this list of conditions and the following disclaimer in the * documentation and/or other materials provided with the distribution. * * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN * ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. * * from: OpenBSD: clkbrdreg.h,v 1.2 2004/10/01 15:36:30 jason Exp * * $FreeBSD$ */ #ifndef _SPARC64_FHC_CLKBRDREG_H_ #define _SPARC64_FHC_CLKBRDREG_H_ /* register bank 0 */ #define CLK_CF_REG2 0x20 /* clock frequency register 2 */ #define CLK_CF_REG2_REN_RCONS 0x80 /* reset enable: remote console */ #define CLK_CF_REG2_REN_GEN 0x40 /* reset enable: frequency change */ #define CLK_CF_REG2_REN_WDOG 0x20 /* reset enable: watchdog */ #define CLK_CF_REG2_DIV1 0x10 /* CPU module divisor bit 1 */ #define CLK_CF_REG2_RANGE 0x0c /* clock range */ #define CLK_CF_REG2_DIV0 0x02 /* CPU module divisor bit 0 */ #define CLK_CF_REG2_FREQ8 0x01 /* frequency bit 8 */ /* register bank 1 */ #define CLK_CTRL 0x00 /* system control register */ #define CLK_CTRL_IEN_FAN 0x80 /* intr enable: fan failure */ #define CLK_CTRL_IEN_DC 0x40 /* intr enable: power supply DC */ #define CLK_CTRL_IEN_AC 0x20 /* intr enable: AC power */ #define CLK_CTRL_IEN_BRD 0x10 /* intr enable: board insert */ #define CLK_CTRL_POFF 0x08 /* turn off system power */ #define CLK_CTRL_LLED 0x04 /* left led (reversed) */ #define CLK_CTRL_MLED 0x02 /* middle led */ #define CLK_CTRL_RLED 0x01 /* right led */ #define CLK_STS1 0x10 /* system status register 1 */ #define CLK_STS1_SLOTS_MASK 0xc0 /* system status 1 slots mask */ #define CLK_STS1_SLOTS_16 0x40 /* 16 slots */ #define CLK_STS1_SLOTS_8 0xc0 /* 8 slots */ #define CLK_STS1_SLOTS_4 0x80 /* 4 slots */ #define CLK_STS1_SLOTS_TESTBED 0x00 /* test machine */ #define CLK_STS1_SECURE 0x20 /* key in position secure (reversed) */ #define CLK_STS1_FAN 0x10 /* fan tray present (reversed) */ #define CLK_STS1_BRD 0x08 /* board inserted (reversed) */ #define CLK_STS1_PS0 0x04 /* power supply 0 present (reversed) */ #define CLK_STS1_RST_WDOG 0x02 /* rst by: watchdog (reversed) */ #define CLK_STS1_RST_GEN 0x01 /* rst by: freq change (reversed) */ #define CLK_STS2 0x20 /* system status register 2 */ #define CLK_STS2_RST_RCONS 0x80 /* rst by: remote console (reversed) */ #define CLK_STS2_OK_PS0 0x40 /* ok: power supply 0 */ #define CLK_STS2_OK_33V 0x20 /* ok: 3.3V on clock board */ #define CLK_STS2_OK_50V 0x10 /* ok: 5.0V on clock board */ #define CLK_STS2_FAIL_AC 0x08 /* failed: AC power */ #define CLK_STS2_FAIL_FAN 0x04 /* failed: rack fans */ #define CLK_STS2_OK_ACFAN 0x02 /* ok: 4 AC box fans */ #define CLK_STS2_OK_KEYFAN 0x01 /* ok: keyswitch fans */ #define CLK_PSTS1 0x30 /* power supply 1 status register */ #define CLK_PSTS1_PS 0x80 /* power supply 1 present (reversed) */ #define CLK_PPRES 0x40 /* power supply presence register */ #define CLK_PPRES_CSHARE 0x80 /* current share backplane */ #define CLK_PPRES_OK_MASK 0x7f /* precharge and peripheral pwr mask */ #define CLK_PPRES_OK_P_5V 0x40 /* ok: peripheral 5V */ #define CLK_PPRES_OK_P_12V 0x20 /* ok: peripheral 12V */ #define CLK_PPRES_OK_AUX_5V 0x10 /* ok: auxiliary 5V */ #define CLK_PPRES_OK_PP_5V 0x08 /* ok: peripheral 5V precharge */ #define CLK_PPRES_OK_PP_12V 0x04 /* ok: peripheral 12V precharge */ #define CLK_PPRES_OK_SP_3V 0x02 /* ok: system 3.3V precharge */ #define CLK_PPRES_OK_SP_5V 0x01 /* ok: system 5V precharge */ #define CLK_TEMP 0x50 /* temperature register */ #define CLK_IDIAG 0x60 /* interrupt diagnostic register */ #define CLK_PSTS2 0x70 /* power supply 2 status register */ /* register bank 2 */ #define CLKVER_SLOTS 0x00 /* clock version slots register */ #define CLKVER_SLOTS_MASK 0x80 /* clock version slots mask */ #define CLKVER_SLOTS_PLUS 0x00 /* plus system (reversed) */ #endif /* !_SPARC64_FHC_CLKBRDREG_H_ */ |