/* Licensed to the Apache Software Foundation (ASF) under one or more
* contributor license agreements. See the NOTICE file distributed with
* this work for additional information regarding copyright ownership.
* The ASF licenses this file to You under the Apache License, Version 2.0
* (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef APR_FILE_IO_H
#define APR_FILE_IO_H
/**
* @file apr_file_io.h
* @brief APR File I/O Handling
*/
#include "apr.h"
#include "apr_pools.h"
#include "apr_time.h"
#include "apr_errno.h"
#include "apr_file_info.h"
#include "apr_inherit.h"
#define APR_WANT_STDIO /**< for SEEK_* */
#define APR_WANT_IOVEC /**< for apr_file_writev */
#include "apr_want.h"
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/**
* @defgroup apr_file_io File I/O Handling Functions
* @ingroup APR
* @{
*/
/**
* @defgroup apr_file_open_flags File Open Flags/Routines
* @{
*/
/* Note to implementors: Values in the range 0x00100000--0x80000000
are reserved for platform-specific values. */
#define APR_FOPEN_READ 0x00001 /**< Open the file for reading */
#define APR_FOPEN_WRITE 0x00002 /**< Open the file for writing */
#define APR_FOPEN_CREATE 0x00004 /**< Create the file if not there */
#define APR_FOPEN_APPEND 0x00008 /**< Append to the end of the file */
#define APR_FOPEN_TRUNCATE 0x00010 /**< Open the file and truncate
to 0 length */
#define APR_FOPEN_BINARY 0x00020 /**< Open the file in binary mode
(This flag is ignored on UNIX
because it has no meaning)*/
#define APR_FOPEN_EXCL 0x00040 /**< Open should fail if #APR_FOPEN_CREATE
and file exists. */
#define APR_FOPEN_BUFFERED 0x00080 /**< Open the file for buffered I/O */
#define APR_FOPEN_DELONCLOSE 0x00100 /**< Delete the file after close */
#define APR_FOPEN_XTHREAD 0x00200 /**< Platform dependent tag to open
the file for use across multiple
threads */
#define APR_FOPEN_SHARELOCK 0x00400 /**< Platform dependent support for
higher level locked read/write
access to support writes across
process/machines */
#define APR_FOPEN_NOCLEANUP 0x00800 /**< Do not register a cleanup
when the file is opened. The
apr_os_file_t handle in apr_file_t
will not be closed when the pool
is destroyed. */
#define APR_FOPEN_SENDFILE_ENABLED 0x01000 /**< Advisory flag that this
file should support
apr_socket_sendfile operation */
#define APR_FOPEN_LARGEFILE 0x04000 /**< Platform dependent flag to enable
* large file support, see WARNING below
*/
#define APR_FOPEN_SPARSE 0x08000 /**< Platform dependent flag to enable
* sparse file support, see WARNING below
*/
#define APR_FOPEN_NONBLOCK 0x40000 /**< Platform dependent flag to enable
* non blocking file io */
/* backcompat */
#define APR_READ APR_FOPEN_READ /**< @deprecated @see APR_FOPEN_READ */
#define APR_WRITE APR_FOPEN_WRITE /**< @deprecated @see APR_FOPEN_WRITE */
#define APR_CREATE APR_FOPEN_CREATE /**< @deprecated @see APR_FOPEN_CREATE */
#define APR_APPEND APR_FOPEN_APPEND /**< @deprecated @see APR_FOPEN_APPEND */
#define APR_TRUNCATE APR_FOPEN_TRUNCATE /**< @deprecated @see APR_FOPEN_TRUNCATE */
#define APR_BINARY APR_FOPEN_BINARY /**< @deprecated @see APR_FOPEN_BINARY */
#define APR_EXCL APR_FOPEN_EXCL /**< @deprecated @see APR_FOPEN_EXCL */
#define APR_BUFFERED APR_FOPEN_BUFFERED /**< @deprecated @see APR_FOPEN_BUFFERED */
#define APR_DELONCLOSE APR_FOPEN_DELONCLOSE /**< @deprecated @see APR_FOPEN_DELONCLOSE */
#define APR_XTHREAD APR_FOPEN_XTHREAD /**< @deprecated @see APR_FOPEN_XTHREAD */
#define APR_SHARELOCK APR_FOPEN_SHARELOCK /**< @deprecated @see APR_FOPEN_SHARELOCK */
#define APR_FILE_NOCLEANUP APR_FOPEN_NOCLEANUP /**< @deprecated @see APR_FOPEN_NOCLEANUP */
#define APR_SENDFILE_ENABLED APR_FOPEN_SENDFILE_ENABLED /**< @deprecated @see APR_FOPEN_SENDFILE_ENABLED */
#define APR_LARGEFILE APR_FOPEN_LARGEFILE /**< @deprecated @see APR_FOPEN_LARGEFILE */
/** @def APR_FOPEN_LARGEFILE
* @warning APR_FOPEN_LARGEFILE flag only has effect on some
* platforms where sizeof(apr_off_t) == 4. Where implemented, it
* allows opening and writing to a file which exceeds the size which
* can be represented by apr_off_t (2 gigabytes). When a file's size
* does exceed 2Gb, apr_file_info_get() will fail with an error on the
* descriptor, likewise apr_stat()/apr_lstat() will fail on the
* filename. apr_dir_read() will fail with #APR_INCOMPLETE on a
* directory entry for a large file depending on the particular
* APR_FINFO_* flags. Generally, it is not recommended to use this
* flag.
*
* @def APR_FOPEN_SPARSE
* @warning APR_FOPEN_SPARSE may, depending on platform, convert a
* normal file to a sparse file. Some applications may be unable
* to decipher a sparse file, so it's critical that the sparse file
* flag should only be used for files accessed only by APR or other
* applications known to be able to decipher them. APR does not
* guarantee that it will compress the file into sparse segments
* if it was previously created and written without the sparse flag.
* On platforms which do not understand, or on file systems which
* cannot handle sparse files, the flag is ignored by apr_file_open().
*
* @def APR_FOPEN_NONBLOCK
* @warning APR_FOPEN_NONBLOCK is not implemented on all platforms.
* Callers should be prepared for it to fail with #APR_ENOTIMPL.
*/
/** @} */
/**
* @defgroup apr_file_seek_flags File Seek Flags
* @{
*/
/* flags for apr_file_seek */
/** Set the file position */
#define APR_SET SEEK_SET
/** Current */
#define APR_CUR SEEK_CUR
/** Go to end of file */
#define APR_END SEEK_END
/** @} */
/**
* @defgroup apr_file_attrs_set_flags File Attribute Flags
* @{
*/
/* flags for apr_file_attrs_set */
#define APR_FILE_ATTR_READONLY 0x01 /**< File is read-only */
#define APR_FILE_ATTR_EXECUTABLE 0x02 /**< File is executable */
#define APR_FILE_ATTR_HIDDEN 0x04 /**< File is hidden */
/** @} */
/**
* @defgroup apr_file_writev{_full} max iovec size
* @{
*/
#if defined(DOXYGEN)
#define APR_MAX_IOVEC_SIZE 1024 /**< System dependent maximum
size of an iovec array */
#elif defined(IOV_MAX)
#define APR_MAX_IOVEC_SIZE IOV_MAX
#elif defined(MAX_IOVEC)
#define APR_MAX_IOVEC_SIZE MAX_IOVEC
#else
#define APR_MAX_IOVEC_SIZE 1024
#endif
/** @} */
/** File attributes */
typedef apr_uint32_t apr_fileattrs_t;
/** Type to pass as whence argument to apr_file_seek. */
typedef int apr_seek_where_t;
/**
* Structure for referencing files.
*/
typedef struct apr_file_t apr_file_t;
/* File lock types/flags */
/**
* @defgroup apr_file_lock_types File Lock Types
* @{
*/
#define APR_FLOCK_SHARED 1 /**< Shared lock. More than one process
or thread can hold a shared lock
at any given time. Essentially,
this is a "read lock", preventing
writers from establishing an
exclusive lock. */
#define APR_FLOCK_EXCLUSIVE 2 /**< Exclusive lock. Only one process
may hold an exclusive lock at any
given time. This is analogous to
a "write lock". */
#define APR_FLOCK_TYPEMASK 0x000F /**< mask to extract lock type */
#define APR_FLOCK_NONBLOCK 0x0010 /**< do not block while acquiring the
file lock */
/** @} */
/**
* Open the specified file.
* @param newf The opened file descriptor.
* @param fname The full path to the file (using / on all systems)
* @param flag Or'ed value of:
* @li #APR_FOPEN_READ open for reading
* @li #APR_FOPEN_WRITE open for writing
* @li #APR_FOPEN_CREATE create the file if not there
* @li #APR_FOPEN_APPEND file ptr is set to end prior to all writes
* @li #APR_FOPEN_TRUNCATE set length to zero if file exists
* @li #APR_FOPEN_BINARY not a text file
* @li #APR_FOPEN_BUFFERED buffer the data. Default is non-buffered
* @li #APR_FOPEN_EXCL return error if #APR_FOPEN_CREATE and file exists
* @li #APR_FOPEN_DELONCLOSE delete the file after closing
* @li #APR_FOPEN_XTHREAD Platform dependent tag to open the file
* for use across multiple threads
* @li #APR_FOPEN_SHARELOCK Platform dependent support for higher
* level locked read/write access to support
* writes across process/machines
* @li #APR_FOPEN_NOCLEANUP Do not register a cleanup with the pool
* passed in on the @a pool argument (see below)
* @li #APR_FOPEN_SENDFILE_ENABLED Open with appropriate platform semantics
* for sendfile operations. Advisory only,
* apr_socket_sendfile does not check this flag
* @li #APR_FOPEN_LARGEFILE Platform dependent flag to enable large file
* support, see WARNING below
* @li #APR_FOPEN_SPARSE Platform dependent flag to enable sparse file
* support, see WARNING below
* @li #APR_FOPEN_NONBLOCK Platform dependent flag to enable
* non blocking file io
* @param perm Access permissions for file.
* @param pool The pool to use.
* @remark If perm is #APR_FPROT_OS_DEFAULT and the file is being created,
* appropriate default permissions will be used.
* @remark By default, the returned file descriptor will not be
* inherited by child processes created by apr_proc_create(). This
* can be changed using apr_file_inherit_set().
*/
APR_DECLARE(apr_status_t) apr_file_open(apr_file_t **newf, const char *fname,
apr_int32_t flag, apr_fileperms_t perm,
apr_pool_t *pool);
/**
* Close the specified file.
* @param file The file descriptor to close.
*/
APR_DECLARE(apr_status_t) apr_file_close(apr_file_t *file);
/**
* Delete the specified file.
* @param path The full path to the file (using / on all systems)
* @param pool The pool to use.
* @remark If the file is open, it won't be removed until all
* instances are closed.
*/
APR_DECLARE(apr_status_t) apr_file_remove(const char *path, apr_pool_t *pool);
/**
* Rename the specified file.
* @param from_path The full path to the original file (using / on all systems)
* @param to_path The full path to the new file (using / on all systems)
* @param pool The pool to use.
* @warning If a file exists at the new location, then it will be
* overwritten. Moving files or directories across devices may not be
* possible.
*/
APR_DECLARE(apr_status_t) apr_file_rename(const char *from_path,
const char *to_path,
apr_pool_t *pool);
/**
* Create a hard link to the specified file.
* @param from_path The full path to the original file (using / on all systems)
* @param to_path The full path to the new file (using / on all systems)
* @remark Both files must reside on the same device.
*/
APR_DECLARE(apr_status_t) apr_file_link(const char *from_path,
const char *to_path);
/**
* Copy the specified file to another file.
* @param from_path The full path to the original file (using / on all systems)
* @param to_path The full path to the new file (using / on all systems)
* @param perms Access permissions for the new file if it is created.
* In place of the usual or'd combination of file permissions, the
* value #APR_FPROT_FILE_SOURCE_PERMS may be given, in which case the source
* file's permissions are copied.
* @param pool The pool to use.
* @remark The new file does not need to exist, it will be created if required.
* @warning If the new file already exists, its contents will be overwritten.
*/
APR_DECLARE(apr_status_t) apr_file_copy(const char *from_path,
const char *to_path,
apr_fileperms_t perms,
apr_pool_t *pool);
/**
* Append the specified file to another file.
* @param from_path The full path to the source file (use / on all systems)
* @param to_path The full path to the destination file (use / on all systems)
* @param perms Access permissions for the destination file if it is created.
* In place of the usual or'd combination of file permissions, the
* value #APR_FPROT_FILE_SOURCE_PERMS may be given, in which case the source
* file's permissions are copied.
* @param pool The pool to use.
* @remark The new file does not need to exist, it will be created if required.
*/
APR_DECLARE(apr_status_t) apr_file_append(const char *from_path,
const char *to_path,
apr_fileperms_t perms,
apr_pool_t *pool);
/**
* Are we at the end of the file
* @param fptr The apr file we are testing.
* @remark Returns #APR_EOF if we are at the end of file, #APR_SUCCESS otherwise.
*/
APR_DECLARE(apr_status_t) apr_file_eof(apr_file_t *fptr);
/**
* Open standard error as an apr file pointer.
* @param thefile The apr file to use as stderr.
* @param pool The pool to allocate the file out of.
*
* @remark The only reason that the apr_file_open_std* functions exist
* is that you may not always have a stderr/out/in on Windows. This
* is generally a problem with newer versions of Windows and services.
*
* @remark The other problem is that the C library functions generally work
* differently on Windows and Unix. So, by using apr_file_open_std*
* functions, you can get a handle to an APR struct that works with
* the APR functions which are supposed to work identically on all
* platforms.
*/
APR_DECLARE(apr_status_t) apr_file_open_stderr(apr_file_t **thefile,
apr_pool_t *pool);
/**
* open standard output as an apr file pointer.
* @param thefile The apr file to use as stdout.
* @param pool The pool to allocate the file out of.
*
* @remark See remarks for apr_file_open_stderr().
*/
APR_DECLARE(apr_status_t) apr_file_open_stdout(apr_file_t **thefile,
apr_pool_t *pool);
/**
* open standard input as an apr file pointer.
* @param thefile The apr file to use as stdin.
* @param pool The pool to allocate the file out of.
*
* @remark See remarks for apr_file_open_stderr().
*/
APR_DECLARE(apr_status_t) apr_file_open_stdin(apr_file_t **thefile,
apr_pool_t *pool);
/**
* open standard error as an apr file pointer, with flags.
* @param thefile The apr file to use as stderr.
* @param flags The flags to open the file with. Only the
* @li #APR_FOPEN_EXCL
* @li #APR_FOPEN_BUFFERED
* @li #APR_FOPEN_XTHREAD
* @li #APR_FOPEN_SHARELOCK
* @li #APR_FOPEN_SENDFILE_ENABLED
* @li #APR_FOPEN_LARGEFILE
*
* flags should be used. The #APR_FOPEN_WRITE flag will
* be set unconditionally.
* @param pool The pool to allocate the file out of.
*
* @remark See remarks for apr_file_open_stderr().
*/
APR_DECLARE(apr_status_t) apr_file_open_flags_stderr(apr_file_t **thefile,
apr_int32_t flags,
apr_pool_t *pool);
/**
* open standard output as an apr file pointer, with flags.
* @param thefile The apr file to use as stdout.
* @param flags The flags to open the file with. Only the
* @li #APR_FOPEN_EXCL
* @li #APR_FOPEN_BUFFERED
* @li #APR_FOPEN_XTHREAD
* @li #APR_FOPEN_SHARELOCK
* @li #APR_FOPEN_SENDFILE_ENABLED
* @li #APR_FOPEN_LARGEFILE
*
* flags should be used. The #APR_FOPEN_WRITE flag will
* be set unconditionally.
* @param pool The pool to allocate the file out of.
*
* @remark See remarks for apr_file_open_stderr().
*/
APR_DECLARE(apr_status_t) apr_file_open_flags_stdout(apr_file_t **thefile,
apr_int32_t flags,
apr_pool_t *pool);
/**
* open standard input as an apr file pointer, with flags.
* @param thefile The apr file to use as stdin.
* @param flags The flags to open the file with. Only the
* @li #APR_FOPEN_EXCL
* @li #APR_FOPEN_BUFFERED
* @li #APR_FOPEN_XTHREAD
* @li #APR_FOPEN_SHARELOCK
* @li #APR_FOPEN_SENDFILE_ENABLED
* @li #APR_FOPEN_LARGEFILE
*
* flags should be used. The #APR_FOPEN_WRITE flag will
* be set unconditionally.
* @param pool The pool to allocate the file out of.
*
* @remark See remarks for apr_file_open_stderr().
*/
APR_DECLARE(apr_status_t) apr_file_open_flags_stdin(apr_file_t **thefile,
apr_int32_t flags,
apr_pool_t *pool);
/**
* Read data from the specified file.
* @param thefile The file descriptor to read from.
* @param buf The buffer to store the data to.
* @param nbytes On entry, the number of bytes to read; on exit, the number
* of bytes read.
*
* @remark apr_file_read() will read up to the specified number of
* bytes, but never more. If there isn't enough data to fill that
* number of bytes, all of the available data is read. The third
* argument is modified to reflect the number of bytes read. If a
* char was put back into the stream via ungetc, it will be the first
* character returned.
*
* @remark It is not possible for both bytes to be read and an #APR_EOF
* or other error to be returned. #APR_EINTR is never returned.
*/
APR_DECLARE(apr_status_t) apr_file_read(apr_file_t *thefile, void *buf,
apr_size_t *nbytes);
/**
* Write data to the specified file.
* @param thefile The file descriptor to write to.
* @param buf The buffer which contains the data.
* @param nbytes On entry, the number of bytes to write; on exit, the number
* of bytes written.
*
* @remark apr_file_write() will write up to the specified number of
* bytes, but never more. If the OS cannot write that many bytes, it
* will write as many as it can. The third argument is modified to
* reflect the * number of bytes written.
*
* @remark It is possible for both bytes to be written and an error to
* be returned. #APR_EINTR is never returned.
*/
APR_DECLARE(apr_status_t) apr_file_write(apr_file_t *thefile, const void *buf,
apr_size_t *nbytes);
/**
* Write data from iovec array to the specified file.
* @param thefile The file descriptor to write to.
* @param vec The array from which to get the data to write to the file.
* @param nvec The number of elements in the struct iovec array. This must
* be smaller than #APR_MAX_IOVEC_SIZE. If it isn't, the function
* will fail with #APR_EINVAL.
* @param nbytes The number of bytes written.
*
* @remark It is possible for both bytes to be written and an error to
* be returned. #APR_EINTR is never returned.
*
* @remark apr_file_writev() is available even if the underlying
* operating system doesn't provide writev().
*/
APR_DECLARE(apr_status_t) apr_file_writev(apr_file_t *thefile,
const struct iovec *vec,
apr_size_t nvec, apr_size_t *nbytes);
/**
* Read data from the specified file, ensuring that the buffer is filled
* before returning.
* @param thefile The file descriptor to read from.
* @param buf The buffer to store the data to.
* @param nbytes The number of bytes to read.
* @param bytes_read If non-NULL, this will contain the number of bytes read.
*
* @remark apr_file_read_full() will read up to the specified number of
* bytes, but never more. If there isn't enough data to fill that
* number of bytes, then the process/thread will block until it is
* available or EOF is reached. If a char was put back into the
* stream via ungetc, it will be the first character returned.
*
* @remark It is possible for both bytes to be read and an error to be
* returned. And if *bytes_read is less than nbytes, an accompanying
* error is _always_ returned.
*
* @remark #APR_EINTR is never returned.
*/
APR_DECLARE(apr_status_t) apr_file_read_full(apr_file_t *thefile, void *buf,
apr_size_t nbytes,
apr_size_t *bytes_read);
/**
* Write data to the specified file, ensuring that all of the data is
* written before returning.
* @param thefile The file descriptor to write to.
* @param buf The buffer which contains the data.
* @param nbytes The number of bytes to write.
* @param bytes_written If non-NULL, set to the number of bytes written.
*
* @remark apr_file_write_full() will write up to the specified number of
* bytes, but never more. If the OS cannot write that many bytes, the
* process/thread will block until they can be written. Exceptional
* error such as "out of space" or "pipe closed" will terminate with
* an error.
*
* @remark It is possible for both bytes to be written and an error to
* be returned. And if *bytes_written is less than nbytes, an
* accompanying error is _always_ returned.
*
* @remark #APR_EINTR is never returned.
*/
APR_DECLARE(apr_status_t) apr_file_write_full(apr_file_t *thefile,
const void *buf,
apr_size_t nbytes,
apr_size_t *bytes_written);
/**
* Write data from iovec array to the specified file, ensuring that all of the
* data is written before returning.
* @param thefile The file descriptor to write to.
* @param vec The array from which to get the data to write to the file.
* @param nvec The number of elements in the struct iovec array. This must
* be smaller than #APR_MAX_IOVEC_SIZE. If it isn't, the function
* will fail with #APR_EINVAL.
* @param nbytes The number of bytes written.
*
* @remark apr_file_writev_full() is available even if the underlying
* operating system doesn't provide writev().
*/
APR_DECLARE(apr_status_t) apr_file_writev_full(apr_file_t *thefile,
const struct iovec *vec,
apr_size_t nvec,
apr_size_t *nbytes);
/**
* Write a character into the specified file.
* @param ch The character to write.
* @param thefile The file descriptor to write to
*/
APR_DECLARE(apr_status_t) apr_file_putc(char ch, apr_file_t *thefile);
/**
* Read a character from the specified file.
* @param ch The character to read into
* @param thefile The file descriptor to read from
*/
APR_DECLARE(apr_status_t) apr_file_getc(char *ch, apr_file_t *thefile);
/**
* Put a character back onto a specified stream.
* @param ch The character to write.
* @param thefile The file descriptor to write to
*/
APR_DECLARE(apr_status_t) apr_file_ungetc(char ch, apr_file_t *thefile);
/**
* Read a line from the specified file
* @param str The buffer to store the string in.
* @param len The length of the string
* @param thefile The file descriptor to read from
* @remark The buffer will be NUL-terminated if any characters are stored.
* The newline at the end of the line will not be stripped.
*/
APR_DECLARE(apr_status_t) apr_file_gets(char *str, int len,
apr_file_t *thefile);
/**
* Write the string into the specified file.
* @param str The string to write.
* @param thefile The file descriptor to write to
*/
APR_DECLARE(apr_status_t) apr_file_puts(const char *str, apr_file_t *thefile);
/**
* Flush the file's buffer.
* @param thefile The file descriptor to flush
*/
APR_DECLARE(apr_status_t) apr_file_flush(apr_file_t *thefile);
/**
* Transfer all file modified data and metadata to disk.
* @param thefile The file descriptor to sync
*/
APR_DECLARE(apr_status_t) apr_file_sync(apr_file_t *thefile);
/**
* Transfer all file modified data to disk.
* @param thefile The file descriptor to sync
*/
APR_DECLARE(apr_status_t) apr_file_datasync(apr_file_t *thefile);
/**
* Duplicate the specified file descriptor.
* @param new_file The structure to duplicate into.
* @param old_file The file to duplicate.
* @param p The pool to use for the new file.
* @remark *new_file must point to a valid apr_file_t, or point to NULL.
*/
APR_DECLARE(apr_status_t) apr_file_dup(apr_file_t **new_file,
apr_file_t *old_file,
apr_pool_t *p);
/**
* Duplicate the specified file descriptor and close the original
* @param new_file The old file that is to be closed and reused
* @param old_file The file to duplicate
* @param p The pool to use for the new file
*
* @remark new_file MUST point at a valid apr_file_t. It cannot be NULL.
*/
APR_DECLARE(apr_status_t) apr_file_dup2(apr_file_t *new_file,
apr_file_t *old_file,
apr_pool_t *p);
/**
* Move the specified file descriptor to a new pool
* @param new_file Pointer in which to return the new apr_file_t
* @param old_file The file to move
* @param p The pool to which the descriptor is to be moved
* @remark Unlike apr_file_dup2(), this function doesn't do an
* OS dup() operation on the underlying descriptor; it just
* moves the descriptor's apr_file_t wrapper to a new pool.
* @remark The new pool need not be an ancestor of old_file's pool.
* @remark After calling this function, old_file may not be used
*/
APR_DECLARE(apr_status_t) apr_file_setaside(apr_file_t **new_file,
apr_file_t *old_file,
apr_pool_t *p);
/**
* Give the specified apr file handle a new buffer
* @param thefile The file handle that is to be modified
* @param buffer The buffer
* @param bufsize The size of the buffer
* @remark It is possible to add a buffer to previously unbuffered
* file handles, the #APR_FOPEN_BUFFERED flag will be added to
* the file handle's flags. Likewise, with buffer=NULL and
* bufsize=0 arguments it is possible to make a previously
* buffered file handle unbuffered.
*/
APR_DECLARE(apr_status_t) apr_file_buffer_set(apr_file_t *thefile,
char * buffer,
apr_size_t bufsize);
/**
* Get the size of any buffer for the specified apr file handle
* @param thefile The file handle
*/
APR_DECLARE(apr_size_t) apr_file_buffer_size_get(apr_file_t *thefile);
/**
* Move the read/write file offset to a specified byte within a file.
* @param thefile The file descriptor
* @param where How to move the pointer, one of:
* @li #APR_SET -- set the offset to offset
* @li #APR_CUR -- add the offset to the current position
* @li #APR_END -- add the offset to the current file size
* @param offset The offset to move the pointer to.
* @remark The third argument is modified to be the offset the pointer
was actually moved to.
*/
APR_DECLARE(apr_status_t) apr_file_seek(apr_file_t *thefile,
apr_seek_where_t where,
apr_off_t *offset);
/**
* Create an anonymous pipe.
* @param in The newly created pipe's file for reading.
* @param out The newly created pipe's file for writing.
* @param pool The pool to operate on.
* @remark By default, the returned file descriptors will be inherited
* by child processes created using apr_proc_create(). This can be
* changed using apr_file_inherit_unset().
* @bug Some platforms cannot toggle between blocking and nonblocking,
* and when passing a pipe as a standard handle to an application which
* does not expect it, a non-blocking stream will fluxor the client app.
* @deprecated @see apr_file_pipe_create_ex()
*/
APR_DECLARE(apr_status_t) apr_file_pipe_create(apr_file_t **in,
apr_file_t **out,
apr_pool_t *pool);
/**
* Create an anonymous pipe which portably supports async timeout options.
* @param in The newly created pipe's file for reading.
* @param out The newly created pipe's file for writing.
* @param blocking one of these values defined in apr_thread_proc.h;
* @li #APR_FULL_BLOCK
* @li #APR_READ_BLOCK
* @li #APR_WRITE_BLOCK
* @li #APR_FULL_NONBLOCK
* @param pool The pool to operate on.
* @remark By default, the returned file descriptors will be inherited
* by child processes created using apr_proc_create(). This can be
* changed using apr_file_inherit_unset().
* @remark Some platforms cannot toggle between blocking and nonblocking,
* and when passing a pipe as a standard handle to an application which
* does not expect it, a non-blocking stream will fluxor the client app.
* Use this function rather than apr_file_pipe_create() to create pipes
* where one or both ends require non-blocking semantics.
*/
APR_DECLARE(apr_status_t) apr_file_pipe_create_ex(apr_file_t **in,
apr_file_t **out,
apr_int32_t blocking,
apr_pool_t *pool);
/**
* Create a named pipe.
* @param filename The filename of the named pipe
* @param perm The permissions for the newly created pipe.
* @param pool The pool to operate on.
*/
APR_DECLARE(apr_status_t) apr_file_namedpipe_create(const char *filename,
apr_fileperms_t perm,
apr_pool_t *pool);
/**
* Get the timeout value for a pipe or manipulate the blocking state.
* @param thepipe The pipe we are getting a timeout for.
* @param timeout The current timeout value in microseconds.
*/
APR_DECLARE(apr_status_t) apr_file_pipe_timeout_get(apr_file_t *thepipe,
apr_interval_time_t *timeout);
/**
* Set the timeout value for a pipe or manipulate the blocking state.
* @param thepipe The pipe we are setting a timeout on.
* @param timeout The timeout value in microseconds. Values < 0 mean wait
* forever, 0 means do not wait at all.
*/
APR_DECLARE(apr_status_t) apr_file_pipe_timeout_set(apr_file_t *thepipe,
apr_interval_time_t timeout);
/** file (un)locking functions. */
/**
* Establish a lock on the specified, open file. The lock may be advisory
* or mandatory, at the discretion of the platform. The lock applies to
* the file as a whole, rather than a specific range. Locks are established
* on a per-thread/process basis; a second lock by the same thread will not
* block.
* @param thefile The file to lock.
* @param type The type of lock to establish on the file.
*/
APR_DECLARE(apr_status_t) apr_file_lock(apr_file_t *thefile, int type);
/**
* Remove any outstanding locks on the file.
* @param thefile The file to unlock.
*/
APR_DECLARE(apr_status_t) apr_file_unlock(apr_file_t *thefile);
/**accessor and general file_io functions. */
/**
* return the file name of the current file.
* @param new_path The path of the file.
* @param thefile The currently open file.
*/
APR_DECLARE(apr_status_t) apr_file_name_get(const char **new_path,
apr_file_t *thefile);
/**
* Return the data associated with the current file.
* @param data The user data associated with the file.
* @param key The key to use for retrieving data associated with this file.
* @param file The currently open file.
*/
APR_DECLARE(apr_status_t) apr_file_data_get(void **data, const char *key,
apr_file_t *file);
/**
* Set the data associated with the current file.
* @param file The currently open file.
* @param data The user data to associate with the file.
* @param key The key to use for associating data with the file.
* @param cleanup The cleanup routine to use when the file is destroyed.
*/
APR_DECLARE(apr_status_t) apr_file_data_set(apr_file_t *file, void *data,
const char *key,
apr_status_t (*cleanup)(void *));
/**
* Write a string to a file using a printf format.
* @param fptr The file to write to.
* @param format The format string
* @param ... The values to substitute in the format string
* @return The number of bytes written
*/
APR_DECLARE_NONSTD(int) apr_file_printf(apr_file_t *fptr,
const char *format, ...)
__attribute__((format(printf,2,3)));
/**
* set the specified file's permission bits.
* @param fname The file (name) to apply the permissions to.
* @param perms The permission bits to apply to the file.
*
* @warning Some platforms may not be able to apply all of the
* available permission bits; #APR_INCOMPLETE will be returned if some
* permissions are specified which could not be set.
*
* @warning Platforms which do not implement this feature will return
* #APR_ENOTIMPL.
*/
APR_DECLARE(apr_status_t) apr_file_perms_set(const char *fname,
apr_fileperms_t perms);
/**
* Set attributes of the specified file.
* @param fname The full path to the file (using / on all systems)
* @param attributes Or'd combination of
* @li #APR_FILE_ATTR_READONLY - make the file readonly
* @li #APR_FILE_ATTR_EXECUTABLE - make the file executable
* @li #APR_FILE_ATTR_HIDDEN - make the file hidden
* @param attr_mask Mask of valid bits in attributes.
* @param pool the pool to use.
* @remark This function should be used in preference to explicit manipulation
* of the file permissions, because the operations to provide these
* attributes are platform specific and may involve more than simply
* setting permission bits.
* @warning Platforms which do not implement this feature will return
* #APR_ENOTIMPL.
*/
APR_DECLARE(apr_status_t) apr_file_attrs_set(const char *fname,
apr_fileattrs_t attributes,
apr_fileattrs_t attr_mask,
apr_pool_t *pool);
/**
* Set the mtime of the specified file.
* @param fname The full path to the file (using / on all systems)
* @param mtime The mtime to apply to the file.
* @param pool The pool to use.
* @warning Platforms which do not implement this feature will return
* #APR_ENOTIMPL.
*/
APR_DECLARE(apr_status_t) apr_file_mtime_set(const char *fname,
apr_time_t mtime,
apr_pool_t *pool);
/**
* Create a new directory on the file system.
* @param path the path for the directory to be created. (use / on all systems)
* @param perm Permissions for the new directory.
* @param pool the pool to use.
*/
APR_DECLARE(apr_status_t) apr_dir_make(const char *path, apr_fileperms_t perm,
apr_pool_t *pool);
/** Creates a new directory on the file system, but behaves like
* 'mkdir -p'. Creates intermediate directories as required. No error
* will be reported if PATH already exists.
* @param path the path for the directory to be created. (use / on all systems)
* @param perm Permissions for the new directory.
* @param pool the pool to use.
*/
APR_DECLARE(apr_status_t) apr_dir_make_recursive(const char *path,
apr_fileperms_t perm,
apr_pool_t *pool);
/**
* Remove directory from the file system.
* @param path the path for the directory to be removed. (use / on all systems)
* @param pool the pool to use.
* @remark Removing a directory which is in-use (e.g., the current working
* directory, or during apr_dir_read, or with an open file) is not portable.
*/
APR_DECLARE(apr_status_t) apr_dir_remove(const char *path, apr_pool_t *pool);
/**
* get the specified file's stats.
* @param finfo Where to store the information about the file.
* @param wanted The desired apr_finfo_t fields, as a bit flag of APR_FINFO_* values
* @param thefile The file to get information about.
*/
APR_DECLARE(apr_status_t) apr_file_info_get(apr_finfo_t *finfo,
apr_int32_t wanted,
apr_file_t *thefile);
/**
* Truncate the file's length to the specified offset
* @param fp The file to truncate
* @param offset The offset to truncate to.
* @remark The read/write file offset is repositioned to offset.
*/
APR_DECLARE(apr_status_t) apr_file_trunc(apr_file_t *fp, apr_off_t offset);
/**
* Retrieve the flags that were passed into apr_file_open()
* when the file was opened.
* @return apr_int32_t the flags
*/
APR_DECLARE(apr_int32_t) apr_file_flags_get(apr_file_t *f);
/**
* Get the pool used by the file.
*/
APR_POOL_DECLARE_ACCESSOR(file);
/**
* Set a file to be inherited by child processes.
*
*/
APR_DECLARE_INHERIT_SET(file);
/**
* Unset a file from being inherited by child processes.
*/
APR_DECLARE_INHERIT_UNSET(file);
/**
* Open a temporary file
* @param fp The apr file to use as a temporary file.
* @param templ The template to use when creating a temp file.
* @param flags The flags to open the file with. If this is zero,
* the file is opened with
* #APR_FOPEN_CREATE | #APR_FOPEN_READ | #APR_FOPEN_WRITE |
* #APR_FOPEN_EXCL | #APR_FOPEN_DELONCLOSE
* @param p The pool to allocate the file out of.
* @remark
* This function generates a unique temporary file name from template.
* The last six characters of template must be XXXXXX and these are replaced
* with a string that makes the filename unique. Since it will be modified,
* template must not be a string constant, but should be declared as a character
* array.
*
*/
APR_DECLARE(apr_status_t) apr_file_mktemp(apr_file_t **fp, char *templ,
apr_int32_t flags, apr_pool_t *p);
/**
* Find an existing directory suitable as a temporary storage location.
* @param temp_dir The temp directory.
* @param p The pool to use for any necessary allocations.
* @remark
* This function uses an algorithm to search for a directory that an
* an application can use for temporary storage.
*
*/
APR_DECLARE(apr_status_t) apr_temp_dir_get(const char **temp_dir,
apr_pool_t *p);
/** @} */
#ifdef __cplusplus
}
#endif
#endif /* ! APR_FILE_IO_H */