/*
* P2041RDB Device Tree Source
*
* Copyright 2011 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/* $FreeBSD$ */
/include/ "p2041si.dtsi"
/ {
model = "fsl,P2041RDB";
compatible = "fsl,P2041RDB";
#address-cells = <2>;
#size-cells = <2>;
interrupt-parent = <&mpic>;
aliases {
phy_rgmii_0 = &phy_rgmii_0;
phy_rgmii_1 = &phy_rgmii_1;
phy_sgmii_2 = &phy_sgmii_2;
phy_sgmii_3 = &phy_sgmii_3;
phy_sgmii_4 = &phy_sgmii_4;
phy_sgmii_1c = &phy_sgmii_1c;
phy_sgmii_1d = &phy_sgmii_1d;
phy_sgmii_1e = &phy_sgmii_1e;
phy_sgmii_1f = &phy_sgmii_1f;
phy_xgmii_2 = &phy_xgmii_2;
};
memory {
device_type = "memory";
reg = <0x00000000 0x00000000 0x00000000 0x80000000>;
};
dcsr: dcsr@f00000000 {
ranges = <0x00000000 0xf 0x00000000 0x01008000>;
};
bman-portals@ff4000000 {
bman-portal@0 {
cpu-handle = <&cpu0>;
};
bman-portal@4000 {
cpu-handle = <&cpu1>;
};
bman-portal@8000 {
cpu-handle = <&cpu2>;
};
bman-portal@c000 {
cpu-handle = <&cpu3>;
};
bman-portal@10000 {
};
bman-portal@14000 {
};
bman-portal@18000 {
};
bman-portal@1c000 {
};
bman-portal@20000 {
};
bman-portal@24000 {
};
buffer-pool@0 {
compatible = "fsl,p2041-bpool", "fsl,bpool";
fsl,bpid = <0>;
fsl,bpool-cfg = <0 0x100 0 1 0 0x100>;
};
};
qman-portals@ff4200000 {
qportal0: qman-portal@0 {
cpu-handle = <&cpu0>;
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal1: qman-portal@4000 {
cpu-handle = <&cpu1>;
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal2: qman-portal@8000 {
cpu-handle = <&cpu2>;
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal3: qman-portal@c000 {
cpu-handle = <&cpu3>;
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal4: qman-portal@10000 {
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal5: qman-portal@14000 {
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal6: qman-portal@18000 {
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal7: qman-portal@1c000 {
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal8: qman-portal@20000 {
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
qportal9: qman-portal@24000 {
fsl,qman-pool-channels = <&qpool1 &qpool2 &qpool3
&qpool4 &qpool5 &qpool6
&qpool7 &qpool8 &qpool9
&qpool10 &qpool11 &qpool12
&qpool13 &qpool14 &qpool15>;
};
};
soc: soc@ffe000000 {
spi@110000 {
flash@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "spansion,s25sl12801";
reg = <0>;
spi-max-frequency = <40000000>; /* input clock */
partition@u-boot {
label = "u-boot";
reg = <0x00000000 0x00100000>;
read-only;
};
partition@kernel {
label = "kernel";
reg = <0x00100000 0x00500000>;
read-only;
};
partition@dtb {
label = "dtb";
reg = <0x00600000 0x00100000>;
read-only;
};
partition@fs {
label = "file system";
reg = <0x00700000 0x00900000>;
};
};
};
i2c@118000 {
lm75b@48 {
compatible = "nxp,lm75a";
reg = <0x48>;
};
eeprom@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
rtc@68 {
compatible = "pericom,pt7c4338";
reg = <0x68>;
};
};
i2c@118100 {
eeprom@50 {
compatible = "at24,24c256";
reg = <0x50>;
};
};
usb1: usb@211000 {
dr_mode = "host";
};
pme: pme@316000 {
/* Commented out, use default allocation */
/* fsl,pme-pdsr = <0x0 0x23000000 0x0 0x01000000>; */
/* fsl,pme-sre = <0x0 0x24000000 0x0 0x00a00000>; */
};
qman: qman@318000 {
/* Commented out, use default allocation */
/* fsl,qman-fqd = <0x0 0x20000000 0x0 0x01000000>; */
/* fsl,qman-pfdr = <0x0 0x21000000 0x0 0x01000000>; */
};
bman: bman@31a000 {
/* Same as fsl,qman-*, use default allocation */
/* fsl,bman-fbpr = <0x0 0x22000000 0x0 0x01000000>; */
};
fman0: fman@400000 {
enet0: ethernet@e0000 {
tbi-handle = <&tbi0>;
phy-handle = <&phy_sgmii_2>;
phy-connection-type = "sgmii";
};
mdio0: mdio@e1120 {
tbi0: tbi-phy@8 {
reg = <0x8>;
device_type = "tbi-phy";
};
phy_rgmii_0: ethernet-phy@0 {
reg = <0x0>;
};
phy_rgmii_1: ethernet-phy@1 {
reg = <0x1>;
};
phy_sgmii_2: ethernet-phy@2 {
reg = <0x2>;
};
phy_sgmii_3: ethernet-phy@3 {
reg = <0x3>;
};
phy_sgmii_4: ethernet-phy@4 {
reg = <0x4>;
};
phy_sgmii_1c: ethernet-phy@1c {
reg = <0x1c>;
};
phy_sgmii_1d: ethernet-phy@1d {
reg = <0x1d>;
};
phy_sgmii_1e: ethernet-phy@1e {
reg = <0x1e>;
};
phy_sgmii_1f: ethernet-phy@1f {
reg = <0x1f>;
};
};
enet1: ethernet@e2000 {
tbi-handle = <&tbi1>;
phy-handle = <&phy_sgmii_3>;
phy-connection-type = "sgmii";
};
mdio@e3120 {
tbi1: tbi-phy@8 {
reg = <8>;
device_type = "tbi-phy";
};
};
enet2: ethernet@e4000 {
tbi-handle = <&tbi2>;
phy-handle = <&phy_sgmii_4>;
phy-connection-type = "sgmii";
};
mdio@e5120 {
tbi2: tbi-phy@8 {
reg = <8>;
device_type = "tbi-phy";
};
};
enet3: ethernet@e6000 {
tbi-handle = <&tbi3>;
phy-handle = <&phy_rgmii_1>;
phy-connection-type = "rgmii";
};
mdio@e7120 {
tbi3: tbi-phy@8 {
reg = <8>;
device_type = "tbi-phy";
};
};
enet4: ethernet@e8000 {
tbi-handle = <&tbi4>;
phy-handle = <&phy_rgmii_0>;
phy-connection-type = "rgmii";
};
mdio@e9120 {
tbi4: tbi-phy@8 {
reg = <8>;
device_type = "tbi-phy";
};
};
enet5: ethernet@f0000 {
/*
* phy-handle will be updated by U-Boot to
* reflect the actual slot the XAUI card is in.
*/
phy-handle = <&phy_xgmii_2>;
phy-connection-type = "xgmii";
};
mdio@f1000 {
/* XAUI card in slot 2 */
phy_xgmii_2: ethernet-phy@0 {
reg = <0x0>;
};
};
};
};
rapidio@ffe0c0000 {
reg = <0xf 0xfe0c0000 0 0x11000>;
port1 {
ranges = <0 0 0xc 0x20000000 0 0x10000000>;
};
port2 {
ranges = <0 0 0xc 0x30000000 0 0x10000000>;
};
};
localbus@ffe124000 {
reg = <0xf 0xfe124000 0 0x1000>;
ranges = <0 0 0xf 0xb8000000 0x04000000>;
flash@0,0 {
compatible = "cfi-flash";
/*
* Map 64Mb of 128MB NOR flash memory. Since highest
* line of address of NOR flash memory are set by
* FPGA, memory are divided into two pages equal to
* 64MB. One of the pages can be accessed at once.
*/
reg = <0 0 0x04000000>;
bank-width = <2>;
device-width = <2>;
};
};
pci0: pcie@ffe200000 {
reg = <0xf 0xfe200000 0 0x1000>;
ranges = <0x02000000 0 0x80000000 0x0 0x80000000 0x0 0x10000000
0x01000000 0 0x00000000 0x0 0xff000000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0x80000000
0x02000000 0 0x80000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0xff000000
0 0x00010000>;
};
};
pci1: pcie@ffe201000 {
reg = <0xf 0xfe201000 0 0x1000>;
ranges = <0x02000000 0x0 0x90000000 0x0 0x90000000 0x0 0x10000000
0x01000000 0x0 0x00000000 0x0 0xff010000 0x0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0x90000000
0x02000000 0 0x90000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0xff010000
0 0x00010000>;
};
};
pci2: pcie@ffe202000 {
reg = <0xf 0xfe202000 0 0x1000>;
ranges = <0x02000000 0 0xa0000000 0x0 0xa0000000 0 0x10000000
0x01000000 0 0x00000000 0x0 0xff020000 0 0x00010000>;
pcie@0 {
ranges = <0x02000000 0 0xa0000000
0x02000000 0 0xa0000000
0 0x10000000
0x01000000 0 0x00000000
0x01000000 0 0xff020000
0 0x00010000>;
};
};
chosen {
stdin = "serial0";
stdout = "serial0";
};
};