/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2013-2014 Ruslan Bukin <br@bsdpad.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Vybrid Family Analog components control digital interface (ANADIG)
* Chapter 11, Vybrid Reference Manual, Rev. 5, 07/2013
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/malloc.h>
#include <sys/rman.h>
#include <sys/timeet.h>
#include <sys/timetc.h>
#include <sys/watchdog.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <machine/bus.h>
#include <machine/cpu.h>
#include <machine/intr.h>
#include <arm/freescale/vybrid/vf_common.h>
#define ANADIG_PLL3_CTRL 0x010 /* PLL3 Control */
#define ANADIG_PLL7_CTRL 0x020 /* PLL7 Control */
#define ANADIG_PLL2_CTRL 0x030 /* PLL2 Control */
#define ANADIG_PLL2_SS 0x040 /* PLL2 Spread Spectrum */
#define ANADIG_PLL2_NUM 0x050 /* PLL2 Numerator */
#define ANADIG_PLL2_DENOM 0x060 /* PLL2 Denominator */
#define ANADIG_PLL4_CTRL 0x070 /* PLL4 Control */
#define ANADIG_PLL4_NUM 0x080 /* PLL4 Numerator */
#define ANADIG_PLL4_DENOM 0x090 /* PLL4 Denominator */
#define ANADIG_PLL6_CTRL 0x0A0 /* PLL6 Control */
#define ANADIG_PLL6_NUM 0x0B0 /* PLL6 Numerator */
#define ANADIG_PLL6_DENOM 0x0C0 /* PLL6 Denominator */
#define ANADIG_PLL5_CTRL 0x0E0 /* PLL5 Control */
#define ANADIG_PLL3_PFD 0x0F0 /* PLL3 PFD */
#define ANADIG_PLL2_PFD 0x100 /* PLL2 PFD */
#define ANADIG_REG_1P1 0x110 /* Regulator 1P1 */
#define ANADIG_REG_3P0 0x120 /* Regulator 3P0 */
#define ANADIG_REG_2P5 0x130 /* Regulator 2P5 */
#define ANADIG_ANA_MISC0 0x150 /* Analog Miscellaneous */
#define ANADIG_ANA_MISC1 0x160 /* Analog Miscellaneous */
#define ANADIG_ANADIG_DIGPROG 0x260 /* Digital Program */
#define ANADIG_PLL1_CTRL 0x270 /* PLL1 Control */
#define ANADIG_PLL1_SS 0x280 /* PLL1 Spread Spectrum */
#define ANADIG_PLL1_NUM 0x290 /* PLL1 Numerator */
#define ANADIG_PLL1_DENOM 0x2A0 /* PLL1 Denominator */
#define ANADIG_PLL1_PFD 0x2B0 /* PLL1_PFD */
#define ANADIG_PLL_LOCK 0x2C0 /* PLL Lock */
#define USB_VBUS_DETECT(n) (0x1A0 + 0x60 * n)
#define USB_CHRG_DETECT(n) (0x1B0 + 0x60 * n)
#define USB_VBUS_DETECT_STATUS(n) (0x1C0 + 0x60 * n)
#define USB_CHRG_DETECT_STATUS(n) (0x1D0 + 0x60 * n)
#define USB_LOOPBACK(n) (0x1E0 + 0x60 * n)
#define USB_MISC(n) (0x1F0 + 0x60 * n)
#define ANADIG_PLL_LOCKED (1U << 31)
#define ENABLE_LINREG (1 << 0)
#define EN_CLK_TO_UTMI (1 << 30)
#define CTRL_BYPASS (1 << 16)
#define CTRL_PWR (1 << 12)
#define CTRL_PLL_EN (1 << 13)
#define EN_USB_CLKS (1 << 6)
#define PLL4_CTRL_DIV_SEL_S 0
#define PLL4_CTRL_DIV_SEL_M 0x7f
struct anadig_softc {
struct resource *res[1];
bus_space_tag_t bst;
bus_space_handle_t bsh;
};
struct anadig_softc *anadig_sc;
static struct resource_spec anadig_spec[] = {
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
{ -1, 0 }
};
static int
anadig_probe(device_t dev)
{
if (!ofw_bus_status_okay(dev))
return (ENXIO);
if (!ofw_bus_is_compatible(dev, "fsl,mvf600-anadig"))
return (ENXIO);
device_set_desc(dev, "Vybrid Family ANADIG Unit");
return (BUS_PROBE_DEFAULT);
}
static int
enable_pll(struct anadig_softc *sc, int pll_ctrl)
{
int reg;
reg = READ4(sc, pll_ctrl);
reg &= ~(CTRL_BYPASS | CTRL_PWR);
if (pll_ctrl == ANADIG_PLL3_CTRL || pll_ctrl == ANADIG_PLL7_CTRL) {
/* It is USB PLL. Power bit logic is reversed */
reg |= (CTRL_PWR | EN_USB_CLKS);
}
WRITE4(sc, pll_ctrl, reg);
/* Wait for PLL lock */
while (!(READ4(sc, pll_ctrl) & ANADIG_PLL_LOCKED))
;
reg = READ4(sc, pll_ctrl);
reg |= (CTRL_PLL_EN);
WRITE4(sc, pll_ctrl, reg);
return (0);
}
uint32_t
pll4_configure_output(uint32_t mfi, uint32_t mfn, uint32_t mfd)
{
struct anadig_softc *sc;
int reg;
sc = anadig_sc;
/*
* PLLout = Fsys * (MFI+(MFN/MFD))
*/
reg = READ4(sc, ANADIG_PLL4_CTRL);
reg &= ~(PLL4_CTRL_DIV_SEL_M << PLL4_CTRL_DIV_SEL_S);
reg |= (mfi << PLL4_CTRL_DIV_SEL_S);
WRITE4(sc, ANADIG_PLL4_CTRL, reg);
WRITE4(sc, ANADIG_PLL4_NUM, mfn);
WRITE4(sc, ANADIG_PLL4_DENOM, mfd);
return (0);
}
static int
anadig_attach(device_t dev)
{
struct anadig_softc *sc;
int reg;
sc = device_get_softc(dev);
if (bus_alloc_resources(dev, anadig_spec, sc->res)) {
device_printf(dev, "could not allocate resources\n");
return (ENXIO);
}
/* Memory interface */
sc->bst = rman_get_bustag(sc->res[0]);
sc->bsh = rman_get_bushandle(sc->res[0]);
anadig_sc = sc;
/* Enable USB PLLs */
enable_pll(sc, ANADIG_PLL3_CTRL);
enable_pll(sc, ANADIG_PLL7_CTRL);
/* Enable other PLLs */
enable_pll(sc, ANADIG_PLL1_CTRL);
enable_pll(sc, ANADIG_PLL2_CTRL);
enable_pll(sc, ANADIG_PLL4_CTRL);
enable_pll(sc, ANADIG_PLL5_CTRL);
enable_pll(sc, ANADIG_PLL6_CTRL);
/* Enable USB voltage regulator */
reg = READ4(sc, ANADIG_REG_3P0);
reg |= (ENABLE_LINREG);
WRITE4(sc, ANADIG_REG_3P0, reg);
/* Give clocks to USB */
reg = READ4(sc, USB_MISC(0));
reg |= (EN_CLK_TO_UTMI);
WRITE4(sc, USB_MISC(0), reg);
reg = READ4(sc, USB_MISC(1));
reg |= (EN_CLK_TO_UTMI);
WRITE4(sc, USB_MISC(1), reg);
#if 0
printf("USB_ANALOG_USB_MISC(0) == 0x%08x\n",
READ4(sc, USB_ANALOG_USB_MISC(0)));
printf("USB_ANALOG_USB_MISC(1) == 0x%08x\n",
READ4(sc, USB_ANALOG_USB_MISC(1)));
#endif
return (0);
}
static device_method_t anadig_methods[] = {
DEVMETHOD(device_probe, anadig_probe),
DEVMETHOD(device_attach, anadig_attach),
{ 0, 0 }
};
static driver_t anadig_driver = {
"anadig",
anadig_methods,
sizeof(struct anadig_softc),
};
static devclass_t anadig_devclass;
DRIVER_MODULE(anadig, simplebus, anadig_driver, anadig_devclass, 0, 0);