/******************************************************************************
*
* Module Name: exserial - FieldUnit support for serial address spaces
*
*****************************************************************************/
/******************************************************************************
*
* 1. Copyright Notice
*
* Some or all of this work - Copyright (c) 1999 - 2020, Intel Corp.
* All rights reserved.
*
* 2. License
*
* 2.1. This is your license from Intel Corp. under its intellectual property
* rights. You may have additional license terms from the party that provided
* you this software, covering your right to use that party's intellectual
* property rights.
*
* 2.2. Intel grants, free of charge, to any person ("Licensee") obtaining a
* copy of the source code appearing in this file ("Covered Code") an
* irrevocable, perpetual, worldwide license under Intel's copyrights in the
* base code distributed originally by Intel ("Original Intel Code") to copy,
* make derivatives, distribute, use and display any portion of the Covered
* Code in any form, with the right to sublicense such rights; and
*
* 2.3. Intel grants Licensee a non-exclusive and non-transferable patent
* license (with the right to sublicense), under only those claims of Intel
* patents that are infringed by the Original Intel Code, to make, use, sell,
* offer to sell, and import the Covered Code and derivative works thereof
* solely to the minimum extent necessary to exercise the above copyright
* license, and in no event shall the patent license extend to any additions
* to or modifications of the Original Intel Code. No other license or right
* is granted directly or by implication, estoppel or otherwise;
*
* The above copyright and patent license is granted only if the following
* conditions are met:
*
* 3. Conditions
*
* 3.1. Redistribution of Source with Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification with rights to further distribute source must include
* the above Copyright Notice, the above License, this list of Conditions,
* and the following Disclaimer and Export Compliance provision. In addition,
* Licensee must cause all Covered Code to which Licensee contributes to
* contain a file documenting the changes Licensee made to create that Covered
* Code and the date of any change. Licensee must include in that file the
* documentation of any changes made by any predecessor Licensee. Licensee
* must include a prominent statement that the modification is derived,
* directly or indirectly, from Original Intel Code.
*
* 3.2. Redistribution of Source with no Rights to Further Distribute Source.
* Redistribution of source code of any substantial portion of the Covered
* Code or modification without rights to further distribute source must
* include the following Disclaimer and Export Compliance provision in the
* documentation and/or other materials provided with distribution. In
* addition, Licensee may not authorize further sublicense of source of any
* portion of the Covered Code, and must include terms to the effect that the
* license from Licensee to its licensee is limited to the intellectual
* property embodied in the software Licensee provides to its licensee, and
* not to intellectual property embodied in modifications its licensee may
* make.
*
* 3.3. Redistribution of Executable. Redistribution in executable form of any
* substantial portion of the Covered Code or modification must reproduce the
* above Copyright Notice, and the following Disclaimer and Export Compliance
* provision in the documentation and/or other materials provided with the
* distribution.
*
* 3.4. Intel retains all right, title, and interest in and to the Original
* Intel Code.
*
* 3.5. Neither the name Intel nor any other trademark owned or controlled by
* Intel shall be used in advertising or otherwise to promote the sale, use or
* other dealings in products derived from or relating to the Covered Code
* without prior written authorization from Intel.
*
* 4. Disclaimer and Export Compliance
*
* 4.1. INTEL MAKES NO WARRANTY OF ANY KIND REGARDING ANY SOFTWARE PROVIDED
* HERE. ANY SOFTWARE ORIGINATING FROM INTEL OR DERIVED FROM INTEL SOFTWARE
* IS PROVIDED "AS IS," AND INTEL WILL NOT PROVIDE ANY SUPPORT, ASSISTANCE,
* INSTALLATION, TRAINING OR OTHER SERVICES. INTEL WILL NOT PROVIDE ANY
* UPDATES, ENHANCEMENTS OR EXTENSIONS. INTEL SPECIFICALLY DISCLAIMS ANY
* IMPLIED WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT AND FITNESS FOR A
* PARTICULAR PURPOSE.
*
* 4.2. IN NO EVENT SHALL INTEL HAVE ANY LIABILITY TO LICENSEE, ITS LICENSEES
* OR ANY OTHER THIRD PARTY, FOR ANY LOST PROFITS, LOST DATA, LOSS OF USE OR
* COSTS OF PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES, OR FOR ANY INDIRECT,
* SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THIS AGREEMENT, UNDER ANY
* CAUSE OF ACTION OR THEORY OF LIABILITY, AND IRRESPECTIVE OF WHETHER INTEL
* HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES. THESE LIMITATIONS
* SHALL APPLY NOTWITHSTANDING THE FAILURE OF THE ESSENTIAL PURPOSE OF ANY
* LIMITED REMEDY.
*
* 4.3. Licensee shall not export, either directly or indirectly, any of this
* software or system incorporating such software without first obtaining any
* required license or other approval from the U. S. Department of Commerce or
* any other agency or department of the United States Government. In the
* event Licensee exports any such software from the United States or
* re-exports any such software from a foreign destination, Licensee shall
* ensure that the distribution and export/re-export of the software is in
* compliance with all laws, regulations, orders, or other restrictions of the
* U.S. Export Administration Regulations. Licensee agrees that neither it nor
* any of its subsidiaries will export/re-export any technical data, process,
* software, or service, directly or indirectly, to any country for which the
* United States government or any agency thereof requires an export license,
* other governmental approval, or letter of assurance, without first obtaining
* such license, approval or letter.
*
*****************************************************************************
*
* Alternatively, you may choose to be licensed under the terms of the
* following license:
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* Alternatively, you may choose to be licensed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
*****************************************************************************/
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <contrib/dev/acpica/include/acdispat.h>
#include <contrib/dev/acpica/include/acinterp.h>
#include <contrib/dev/acpica/include/amlcode.h>
#define _COMPONENT ACPI_EXECUTER
ACPI_MODULE_NAME ("exserial")
/*******************************************************************************
*
* FUNCTION: AcpiExReadGpio
*
* PARAMETERS: ObjDesc - The named field to read
* Buffer - Where the return data is returned
*
* RETURN: Status
*
* DESCRIPTION: Read from a named field that references a Generic Serial Bus
* field
*
******************************************************************************/
ACPI_STATUS
AcpiExReadGpio (
ACPI_OPERAND_OBJECT *ObjDesc,
void *Buffer)
{
ACPI_STATUS Status;
ACPI_FUNCTION_TRACE_PTR (ExReadGpio, ObjDesc);
/*
* For GPIO (GeneralPurposeIo), the Address will be the bit offset
* from the previous Connection() operator, making it effectively a
* pin number index. The BitLength is the length of the field, which
* is thus the number of pins.
*/
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"GPIO FieldRead [FROM]: Pin %u Bits %u\n",
ObjDesc->Field.PinNumberIndex, ObjDesc->Field.BitLength));
/* Lock entire transaction if requested */
AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);
/* Perform the read */
Status = AcpiExAccessRegion (
ObjDesc, 0, (UINT64 *) Buffer, ACPI_READ);
AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExWriteGpio
*
* PARAMETERS: SourceDesc - Contains data to write. Expect to be
* an Integer object.
* ObjDesc - The named field
* ResultDesc - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Write to a named field that references a General Purpose I/O
* field.
*
******************************************************************************/
ACPI_STATUS
AcpiExWriteGpio (
ACPI_OPERAND_OBJECT *SourceDesc,
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_OPERAND_OBJECT **ReturnBuffer)
{
ACPI_STATUS Status;
void *Buffer;
ACPI_FUNCTION_TRACE_PTR (ExWriteGpio, ObjDesc);
/*
* For GPIO (GeneralPurposeIo), we will bypass the entire field
* mechanism and handoff the bit address and bit width directly to
* the handler. The Address will be the bit offset
* from the previous Connection() operator, making it effectively a
* pin number index. The BitLength is the length of the field, which
* is thus the number of pins.
*/
if (SourceDesc->Common.Type != ACPI_TYPE_INTEGER)
{
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
"GPIO FieldWrite [FROM]: (%s:%X), Value %.8X [TO]: Pin %u Bits %u\n",
AcpiUtGetTypeName (SourceDesc->Common.Type),
SourceDesc->Common.Type, (UINT32) SourceDesc->Integer.Value,
ObjDesc->Field.PinNumberIndex, ObjDesc->Field.BitLength));
Buffer = &SourceDesc->Integer.Value;
/* Lock entire transaction if requested */
AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);
/* Perform the write */
Status = AcpiExAccessRegion (
ObjDesc, 0, (UINT64 *) Buffer, ACPI_WRITE);
AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExReadSerialBus
*
* PARAMETERS: ObjDesc - The named field to read
* ReturnBuffer - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Read from a named field that references a serial bus
* (SMBus, IPMI, or GSBus).
*
******************************************************************************/
ACPI_STATUS
AcpiExReadSerialBus (
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_OPERAND_OBJECT **ReturnBuffer)
{
ACPI_STATUS Status;
UINT32 BufferLength;
ACPI_OPERAND_OBJECT *BufferDesc;
UINT32 Function;
UINT16 AccessorType;
ACPI_FUNCTION_TRACE_PTR (ExReadSerialBus, ObjDesc);
/*
* This is an SMBus, GSBus or IPMI read. We must create a buffer to
* hold the data and then directly access the region handler.
*
* Note: SMBus and GSBus protocol value is passed in upper 16-bits
* of Function
*
* Common buffer format:
* Status; (Byte 0 of the data buffer)
* Length; (Byte 1 of the data buffer)
* Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
*/
switch (ObjDesc->Field.RegionObj->Region.SpaceId)
{
case ACPI_ADR_SPACE_SMBUS:
BufferLength = ACPI_SMBUS_BUFFER_SIZE;
Function = ACPI_READ | (ObjDesc->Field.Attribute << 16);
break;
case ACPI_ADR_SPACE_IPMI:
BufferLength = ACPI_IPMI_BUFFER_SIZE;
Function = ACPI_READ;
break;
case ACPI_ADR_SPACE_GSBUS:
AccessorType = ObjDesc->Field.Attribute;
if (AccessorType == AML_FIELD_ATTRIB_RAW_PROCESS_BYTES)
{
ACPI_ERROR ((AE_INFO,
"Invalid direct read using bidirectional write-then-read protocol"));
return_ACPI_STATUS (AE_AML_PROTOCOL);
}
Status = AcpiExGetProtocolBufferLength (AccessorType, &BufferLength);
if (ACPI_FAILURE (Status))
{
ACPI_ERROR ((AE_INFO,
"Invalid protocol ID for GSBus: 0x%4.4X", AccessorType));
return_ACPI_STATUS (Status);
}
/* Add header length to get the full size of the buffer */
BufferLength += ACPI_SERIAL_HEADER_SIZE;
Function = ACPI_READ | (AccessorType << 16);
break;
default:
return_ACPI_STATUS (AE_AML_INVALID_SPACE_ID);
}
/* Create the local transfer buffer that is returned to the caller */
BufferDesc = AcpiUtCreateBufferObject (BufferLength);
if (!BufferDesc)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Lock entire transaction if requested */
AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);
/* Call the region handler for the write-then-read */
Status = AcpiExAccessRegion (ObjDesc, 0,
ACPI_CAST_PTR (UINT64, BufferDesc->Buffer.Pointer), Function);
AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);
*ReturnBuffer = BufferDesc;
return_ACPI_STATUS (Status);
}
/*******************************************************************************
*
* FUNCTION: AcpiExWriteSerialBus
*
* PARAMETERS: SourceDesc - Contains data to write
* ObjDesc - The named field
* ReturnBuffer - Where the return value is returned, if any
*
* RETURN: Status
*
* DESCRIPTION: Write to a named field that references a serial bus
* (SMBus, IPMI, GSBus).
*
******************************************************************************/
ACPI_STATUS
AcpiExWriteSerialBus (
ACPI_OPERAND_OBJECT *SourceDesc,
ACPI_OPERAND_OBJECT *ObjDesc,
ACPI_OPERAND_OBJECT **ReturnBuffer)
{
ACPI_STATUS Status;
UINT32 BufferLength;
UINT32 DataLength;
void *Buffer;
ACPI_OPERAND_OBJECT *BufferDesc;
UINT32 Function;
UINT16 AccessorType;
ACPI_FUNCTION_TRACE_PTR (ExWriteSerialBus, ObjDesc);
/*
* This is an SMBus, GSBus or IPMI write. We will bypass the entire
* field mechanism and handoff the buffer directly to the handler.
* For these address spaces, the buffer is bidirectional; on a
* write, return data is returned in the same buffer.
*
* Source must be a buffer of sufficient size, these are fixed size:
* ACPI_SMBUS_BUFFER_SIZE, or ACPI_IPMI_BUFFER_SIZE.
*
* Note: SMBus and GSBus protocol type is passed in upper 16-bits
* of Function
*
* Common buffer format:
* Status; (Byte 0 of the data buffer)
* Length; (Byte 1 of the data buffer)
* Data[x-1]: (Bytes 2-x of the arbitrary length data buffer)
*/
if (SourceDesc->Common.Type != ACPI_TYPE_BUFFER)
{
ACPI_ERROR ((AE_INFO,
"SMBus/IPMI/GenericSerialBus write requires "
"Buffer, found type %s",
AcpiUtGetObjectTypeName (SourceDesc)));
return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
}
switch (ObjDesc->Field.RegionObj->Region.SpaceId)
{
case ACPI_ADR_SPACE_SMBUS:
BufferLength = ACPI_SMBUS_BUFFER_SIZE;
Function = ACPI_WRITE | (ObjDesc->Field.Attribute << 16);
break;
case ACPI_ADR_SPACE_IPMI:
BufferLength = ACPI_IPMI_BUFFER_SIZE;
Function = ACPI_WRITE;
break;
case ACPI_ADR_SPACE_GSBUS:
AccessorType = ObjDesc->Field.Attribute;
Status = AcpiExGetProtocolBufferLength (AccessorType, &BufferLength);
if (ACPI_FAILURE (Status))
{
ACPI_ERROR ((AE_INFO,
"Invalid protocol ID for GSBus: 0x%4.4X", AccessorType));
return_ACPI_STATUS (Status);
}
/* Add header length to get the full size of the buffer */
BufferLength += ACPI_SERIAL_HEADER_SIZE;
Function = ACPI_WRITE | (AccessorType << 16);
break;
default:
return_ACPI_STATUS (AE_AML_INVALID_SPACE_ID);
}
/* Create the transfer/bidirectional/return buffer */
BufferDesc = AcpiUtCreateBufferObject (BufferLength);
if (!BufferDesc)
{
return_ACPI_STATUS (AE_NO_MEMORY);
}
/* Copy the input buffer data to the transfer buffer */
Buffer = BufferDesc->Buffer.Pointer;
DataLength = (BufferLength < SourceDesc->Buffer.Length ?
BufferLength : SourceDesc->Buffer.Length);
memcpy (Buffer, SourceDesc->Buffer.Pointer, DataLength);
/* Lock entire transaction if requested */
AcpiExAcquireGlobalLock (ObjDesc->CommonField.FieldFlags);
/*
* Perform the write (returns status and perhaps data in the
* same buffer)
*/
Status = AcpiExAccessRegion (
ObjDesc, 0, (UINT64 *) Buffer, Function);
AcpiExReleaseGlobalLock (ObjDesc->CommonField.FieldFlags);
*ReturnBuffer = BufferDesc;
return_ACPI_STATUS (Status);
}