// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2018 BayLibre SAS. All rights reserved.
*/
/dts-v1/;
#include "meson-g12a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/gpio/meson-g12a-gpio.h>
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
/ {
compatible = "amediatech,x96-max", "amlogic,g12a";
model = "Shenzhen Amediatech Technology Co., Ltd X96 Max";
aliases {
serial0 = &uart_AO;
ethernet0 = ðmac;
};
spdif_dit: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
status = "okay";
sound-name-prefix = "DIT";
};
chosen {
stdout-path = "serial0:115200n8";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x0 0x0 0x40000000>;
};
cvbs-connector {
compatible = "composite-video-connector";
port {
cvbs_connector_in: endpoint {
remote-endpoint = <&cvbs_vdac_out>;
};
};
};
hdmi-connector {
compatible = "hdmi-connector";
type = "a";
port {
hdmi_connector_in: endpoint {
remote-endpoint = <&hdmi_tx_tmds_out>;
};
};
};
emmc_pwrseq: emmc-pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
};
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
clocks = <&wifi32k>;
clock-names = "ext_clock";
};
flash_1v8: regulator-flash_1v8 {
compatible = "regulator-fixed";
regulator-name = "FLASH_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
dc_in: regulator-dc_in {
compatible = "regulator-fixed";
regulator-name = "DC_IN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
vcc_1v8: regulator-vcc_1v8 {
compatible = "regulator-fixed";
regulator-name = "VCC_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vcc_3v3>;
regulator-always-on;
};
vcc_3v3: regulator-vcc_3v3 {
compatible = "regulator-fixed";
regulator-name = "VCC_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
/* FIXME: actually controlled by VDDCPU_B_EN */
};
vcc_5v: regulator-vcc_5v {
compatible = "regulator-fixed";
regulator-name = "VCC_5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&dc_in>;
gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
enable-active-low;
};
vddao_1v8: regulator-vddao_1v8 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
vin-supply = <&vddao_3v3>;
regulator-always-on;
};
vddao_3v3: regulator-vddao_3v3 {
compatible = "regulator-fixed";
regulator-name = "VDDAO_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&dc_in>;
regulator-always-on;
};
vddcpu: regulator-vddcpu {
compatible = "pwm-regulator";
regulator-name = "VDDCPU";
regulator-min-microvolt = <721000>;
regulator-max-microvolt = <1022000>;
vin-supply = <&dc_in>;
pwms = <&pwm_AO_cd 1 1250 0>;
pwm-dutycycle-range = <100 0>;
regulator-boot-on;
regulator-always-on;
};
sound {
compatible = "amlogic,axg-sound-card";
model = "G12A-X96-MAX";
audio-aux-devs = <&tdmout_b>;
audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
"TDMOUT_B IN 1", "FRDDR_B OUT 1",
"TDMOUT_B IN 2", "FRDDR_C OUT 1",
"TDM_B Playback", "TDMOUT_B OUT",
"SPDIFOUT IN 0", "FRDDR_A OUT 3",
"SPDIFOUT IN 1", "FRDDR_B OUT 3",
"SPDIFOUT IN 2", "FRDDR_C OUT 3";
assigned-clocks = <&clkc CLKID_MPLL2>,
<&clkc CLKID_MPLL0>,
<&clkc CLKID_MPLL1>;
assigned-clock-parents = <0>, <0>, <0>;
assigned-clock-rates = <294912000>,
<270950400>,
<393216000>;
status = "okay";
dai-link-0 {
sound-dai = <&frddr_a>;
};
dai-link-1 {
sound-dai = <&frddr_b>;
};
dai-link-2 {
sound-dai = <&frddr_c>;
};
/* 8ch hdmi interface */
dai-link-3 {
sound-dai = <&tdmif_b>;
dai-format = "i2s";
dai-tdm-slot-tx-mask-0 = <1 1>;
dai-tdm-slot-tx-mask-1 = <1 1>;
dai-tdm-slot-tx-mask-2 = <1 1>;
dai-tdm-slot-tx-mask-3 = <1 1>;
mclk-fs = <256>;
codec {
sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
};
};
/* spdif hdmi or toslink interface */
dai-link-4 {
sound-dai = <&spdifout>;
codec-0 {
sound-dai = <&spdif_dit>;
};
codec-1 {
sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
};
};
/* spdif hdmi interface */
dai-link-5 {
sound-dai = <&spdifout_b>;
codec {
sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
};
};
/* hdmi glue */
dai-link-6 {
sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
codec {
sound-dai = <&hdmi_tx>;
};
};
};
wifi32k: wifi32k {
compatible = "pwm-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
};
};
&arb {
status = "okay";
};
&cec_AO {
pinctrl-0 = <&cec_ao_a_h_pins>;
pinctrl-names = "default";
status = "disabled";
hdmi-phandle = <&hdmi_tx>;
};
&cecb_AO {
pinctrl-0 = <&cec_ao_b_h_pins>;
pinctrl-names = "default";
status = "okay";
hdmi-phandle = <&hdmi_tx>;
};
&clkc_audio {
status = "okay";
};
&cpu0 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu1 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu2 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cpu3 {
cpu-supply = <&vddcpu>;
operating-points-v2 = <&cpu_opp_table>;
clocks = <&clkc CLKID_CPU_CLK>;
clock-latency = <50000>;
};
&cvbs_vdac_port {
cvbs_vdac_out: endpoint {
remote-endpoint = <&cvbs_connector_in>;
};
};
&frddr_a {
status = "okay";
};
&frddr_b {
status = "okay";
};
&frddr_c {
status = "okay";
};
&hdmi_tx {
status = "okay";
pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
pinctrl-names = "default";
hdmi-supply = <&vcc_5v>;
};
&hdmi_tx_tmds_port {
hdmi_tx_tmds_out: endpoint {
remote-endpoint = <&hdmi_connector_in>;
};
};
&ir {
status = "okay";
pinctrl-0 = <&remote_input_ao_pins>;
pinctrl-names = "default";
linux,rc-map-name = "rc-x96max";
};
&pwm_AO_cd {
pinctrl-0 = <&pwm_ao_d_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin1";
status = "okay";
};
&ext_mdio {
external_phy: ethernet-phy@0 {
/* Realtek RTL8211F (0x001cc916) */
reg = <0>;
max-speed = <1000>;
eee-broken-1000t;
reset-assert-us = <10000>;
reset-deassert-us = <30000>;
reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
interrupt-parent = <&gpio_intc>;
/* MAC_INTR on GPIOZ_14 */
interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
};
};
ðmac {
pinctrl-0 = <ð_pins>, <ð_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy-mode = "rgmii";
phy-handle = <&external_phy>;
amlogic,tx-delay-ns = <2>;
};
&pwm_ef {
status = "okay";
pinctrl-0 = <&pwm_e_pins>;
pinctrl-names = "default";
clocks = <&xtal>;
clock-names = "clkin0";
};
&uart_A {
status = "okay";
pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
pinctrl-names = "default";
uart-has-rtscts;
bluetooth {
compatible = "brcm,bcm43438-bt";
shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
max-speed = <2000000>;
clocks = <&wifi32k>;
clock-names = "lpo";
};
};
&uart_AO {
status = "okay";
pinctrl-0 = <&uart_ao_a_pins>;
pinctrl-names = "default";
};
&usb {
status = "okay";
dr_mode = "host";
};
/* SDIO */
&sd_emmc_a {
status = "okay";
pinctrl-0 = <&sdio_pins>;
pinctrl-1 = <&sdio_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
#address-cells = <1>;
#size-cells = <0>;
bus-width = <4>;
cap-sd-highspeed;
sd-uhs-sdr50;
max-frequency = <100000000>;
non-removable;
disable-wp;
/* WiFi firmware requires power to be kept while in suspend */
keep-power-in-suspend;
mmc-pwrseq = <&sdio_pwrseq>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddao_1v8>;
brcmf: wifi@1 {
reg = <1>;
compatible = "brcm,bcm4329-fmac";
};
};
/* SD card */
&sd_emmc_b {
status = "okay";
pinctrl-0 = <&sdcard_c_pins>;
pinctrl-1 = <&sdcard_clk_gate_c_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <4>;
cap-sd-highspeed;
max-frequency = <100000000>;
disable-wp;
cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
vmmc-supply = <&vddao_3v3>;
vqmmc-supply = <&vddao_3v3>;
};
/* eMMC */
&sd_emmc_c {
status = "okay";
pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
pinctrl-1 = <&emmc_clk_gate_pins>;
pinctrl-names = "default", "clk-gate";
bus-width = <8>;
cap-mmc-highspeed;
max-frequency = <100000000>;
non-removable;
disable-wp;
mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v3>;
vqmmc-supply = <&flash_1v8>;
};
&spdifout {
pinctrl-0 = <&spdif_out_h_pins>;
pinctrl-names = "default";
status = "okay";
};
&spdifout_b {
status = "okay";
};
&tdmif_b {
status = "okay";
};
&tdmout_b {
status = "okay";
};
&tohdmitx {
status = "okay";
};