// SPDX-License-Identifier: (GPL-2.0 OR MIT)
/*
* Copyright (C) 2019 Zodiac Inflight Innovations
*/
#include "imx8mq.dtsi"
/ {
aliases {
mdio-gpio0 = &mdio0;
rtc0 = &ds1341;
};
chosen {
stdout-path = &uart1;
};
mdio0: bitbang-mdio {
compatible = "virtual,mdio-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_mdio_bitbang>, <&pinctrl_fec1_phy_reset>;
gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>, /* MDC */
<&gpio1 14 GPIO_ACTIVE_HIGH>; /* MDIO */
#address-cells = <1>;
#size-cells = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
reset-gpios = <&gpio1 29 GPIO_ACTIVE_LOW>;
};
};
pcie0_refclk: clock-pcie0-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
pcie1_refclk: clock-pcie1-refclk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
};
reg_12p0_main: regulator-12p0-main {
compatible = "regulator-fixed";
regulator-name = "12V_MAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_5p0_main: regulator-5p0-main {
compatible = "regulator-fixed";
vin-supply = <®_12p0_main>;
regulator-name = "5V_MAIN";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
regulator-always-on;
};
reg_3p3_main: regulator-3p3-main {
compatible = "regulator-fixed";
vin-supply = <®_12p0_main>;
regulator-name = "3V3_MAIN";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_gen_3p3: regulator-gen-3p3 {
compatible = "regulator-fixed";
vin-supply = <®_3p3_main>;
regulator-name = "GEN_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_usdhc2_vmmc: regulator-vsd-3v3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_usdhc2>;
compatible = "regulator-fixed";
vin-supply = <®_gen_3p3>;
regulator-name = "3V3_SD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_arm: regulator-arm {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reg_arm>;
compatible = "regulator-gpio";
vin-supply = <®_12p0_main>;
regulator-name = "0V9_ARM";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1000000>;
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
states = <1000000 0x1
900000 0x0>;
regulator-always-on;
};
};
&A53_0 {
cpu-supply = <®_arm>;
};
&A53_1 {
cpu-supply = <®_arm>;
};
&A53_2 {
cpu-supply = <®_arm>;
};
&A53_3 {
cpu-supply = <®_arm>;
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-handle = <&phy0>;
phy-mode = "rmii";
status = "okay";
mdio {
#address-cells = <1>;
#size-cells = <0>;
status = "okay";
switch: switch@0 {
compatible = "marvell,mv88e6085";
pinctrl-0 = <&pinctrl_switch_irq>;
pinctrl-names = "default";
reg = <0>;
dsa,member = <0 0>;
eeprom-length = <512>;
interrupt-parent = <&gpio1>;
interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <2>;
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
label = "gigabit_proc";
phy-handle = <&switchphy0>;
};
port@1 {
reg = <1>;
label = "netaux";
phy-handle = <&switchphy1>;
};
port@2 {
reg = <2>;
label = "cpu";
ethernet = <&fec1>;
fixed-link {
speed = <100>;
full-duplex;
};
};
port@3 {
reg = <3>;
label = "netright";
phy-handle = <&switchphy3>;
};
port@4 {
reg = <4>;
label = "netleft";
phy-handle = <&switchphy4>;
};
};
mdio {
#address-cells = <1>;
#size-cells = <0>;
switchphy0: switchphy@0 {
reg = <0>;
interrupt-parent = <&switch>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy1: switchphy@1 {
reg = <1>;
interrupt-parent = <&switch>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy2: switchphy@2 {
reg = <2>;
interrupt-parent = <&switch>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy3: switchphy@3 {
reg = <3>;
interrupt-parent = <&switch>;
interrupts = <3 IRQ_TYPE_LEVEL_HIGH>;
};
switchphy4: switchphy@4 {
reg = <4>;
interrupt-parent = <&switch>;
interrupts = <4 IRQ_TYPE_LEVEL_HIGH>;
};
};
};
};
};
&gpio3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio3_hog>;
usb-emulation {
gpio-hog;
gpios = <10 GPIO_ACTIVE_HIGH>;
output-low;
line-name = "usb-emulation";
};
usb-mode1 {
gpio-hog;
gpios = <11 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode1";
};
usb-pwr {
gpio-hog;
gpios = <12 GPIO_ACTIVE_LOW>;
output-high;
line-name = "usb-pwr-ctrl-en-n";
};
usb-mode2 {
gpio-hog;
gpios = <13 GPIO_ACTIVE_HIGH>;
output-high;
line-name = "usb-mode2";
};
};
&i2c1 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
accelerometer@1c {
compatible = "fsl,mma8451";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_accel>;
reg = <0x1c>;
interrupt-parent = <&gpio3>;
interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
interrupt-names = "INT2";
vdd-supply = <®_gen_3p3>;
vddio-supply = <®_gen_3p3>;
};
ucs1002: charger@32 {
compatible = "microchip,ucs1002";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ucs1002>;
reg = <0x32>;
interrupt-parent = <&gpio3>;
interrupts = <17 IRQ_TYPE_EDGE_BOTH>,
<18 IRQ_TYPE_EDGE_BOTH>;
interrupt-names = "a_det", "alert";
};
};
&i2c2 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
pmic@8 {
compatible = "fsl,pfuze100";
reg = <0x8>;
regulators {
sw1a_reg: sw1ab {
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1100000>;
};
sw1c_reg: sw1c {
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1100000>;
};
sw2_reg: sw2 {
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
sw3a_reg: sw3ab {
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
sw4_reg: sw4 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
swbst_reg: swbst {
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5150000>;
};
snvs_reg: vsnvs {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
vref_reg: vrefddr {
regulator-always-on;
};
vgen1_reg: vgen1 {
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <1550000>;
};
vgen2_reg: vgen2 {
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <975000>;
regulator-always-on;
};
vgen3_reg: vgen3 {
regulator-min-microvolt = <1675000>;
regulator-max-microvolt = <1975000>;
regulator-always-on;
};
vgen4_reg: vgen4 {
regulator-min-microvolt = <1625000>;
regulator-max-microvolt = <1875000>;
regulator-always-on;
};
vgen5_reg: vgen5 {
regulator-min-microvolt = <3075000>;
regulator-max-microvolt = <3625000>;
regulator-always-on;
};
vgen6_reg: vgen6 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
};
};
eeprom@54 {
compatible = "atmel,24c128";
reg = <0x54>;
};
ds1341: rtc@68 {
compatible = "dallas,ds1341";
reg = <0x68>;
};
};
&i2c3 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3>;
status = "okay";
usbhub: usbhub@2c {
compatible ="microchip,usb2513b";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbhub>;
reg = <0x2c>;
reset-gpios = <&gpio3 25 GPIO_ACTIVE_LOW>;
};
watchdog@38 {
compatible = "zii,rave-wdt";
reg = <0x38>;
};
};
&i2c4 {
clock-frequency = <400000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c4>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
rave-sp {
compatible = "zii,rave-sp-rdu2";
current-speed = <1000000>;
#address-cells = <1>;
#size-cells = <1>;
watchdog {
compatible = "zii,rave-sp-watchdog";
};
backlight {
compatible = "zii,rave-sp-backlight";
};
pwrbutton {
compatible = "zii,rave-sp-pwrbutton";
};
eeprom@a3 {
compatible = "zii,rave-sp-eeprom";
reg = <0xa3 0x4000>;
zii,eeprom-name = "dds-eeprom";
};
eeprom@a4 {
compatible = "zii,rave-sp-eeprom";
reg = <0xa4 0x4000>;
#address-cells = <1>;
#size-cells = <1>;
zii,eeprom-name = "main-eeprom";
};
};
};
&usb3_phy0 {
vbus-supply = <&ucs1002>;
status = "okay";
};
&usb_dwc3_0 {
dr_mode = "host";
status = "okay";
};
&usb3_phy1 {
vbus-supply = <®_5p0_main>;
status = "okay";
};
&usb_dwc3_1 {
dr_mode = "host";
status = "okay";
};
&pcie0 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie0>;
reset-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MQ_CLK_PCIE1_ROOT>,
<&clk IMX8MQ_CLK_PCIE1_AUX>,
<&clk IMX8MQ_CLK_PCIE1_PHY>,
<&pcie0_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
status = "okay";
};
&pcie1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie1>;
reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
clocks = <&clk IMX8MQ_CLK_PCIE2_ROOT>,
<&clk IMX8MQ_CLK_PCIE2_AUX>,
<&clk IMX8MQ_CLK_PCIE2_PHY>,
<&pcie1_refclk>;
clock-names = "pcie", "pcie_aux", "pcie_phy", "pcie_bus";
status = "okay";
};
&pgc_gpu {
power-supply = <&sw1a_reg>;
};
&pgc_vpu {
power-supply = <&sw1c_reg>;
};
&usdhc1 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC1>;
assigned-clock-rates = <400000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1>;
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
vqmmc-supply = <&sw4_reg>;
bus-width = <8>;
non-removable;
no-sd;
no-sdio;
status = "okay";
};
&usdhc2 {
assigned-clocks = <&clk IMX8MQ_CLK_USDHC2>;
assigned-clock-rates = <200000000>;
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc2>;
pinctrl-1 = <&pinctrl_usdhc2_100mhz>;
pinctrl-2 = <&pinctrl_usdhc2_200mhz>;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
vmmc-supply = <®_usdhc2_vmmc>;
status = "okay";
};
&snvs_rtc {
status = "disabled";
};
&iomuxc {
pinctrl_accel: accelgrp {
fsl,pins = <
MX8MQ_IOMUXC_SAI5_RXC_GPIO3_IO20 0x41
>;
};
pinctrl_fec1: fec1grp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_MDC_ENET1_MDC 0x3
MX8MQ_IOMUXC_ENET_MDIO_ENET1_MDIO 0x23
MX8MQ_IOMUXC_ENET_TD1_ENET1_RGMII_TD1 0x1f
MX8MQ_IOMUXC_ENET_TD0_ENET1_RGMII_TD0 0x1f
MX8MQ_IOMUXC_ENET_RD1_ENET1_RGMII_RD1 0x91
MX8MQ_IOMUXC_ENET_RD0_ENET1_RGMII_RD0 0x91
MX8MQ_IOMUXC_ENET_TD2_ENET1_TX_CLK 0x1f
MX8MQ_IOMUXC_ENET_RXC_ENET1_RX_ER 0x91
MX8MQ_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL 0x91
MX8MQ_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL 0x1f
>;
};
pinctrl_fec1_phy_reset: fec1phyresetgrp {
fsl,pins = <
MX8MQ_IOMUXC_ENET_RD3_GPIO1_IO29 0x11
>;
};
pinctrl_gpio3_hog: gpio3hoggrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_DATA04_GPIO3_IO10 0x6
MX8MQ_IOMUXC_NAND_DATA05_GPIO3_IO11 0x6
MX8MQ_IOMUXC_NAND_DATA06_GPIO3_IO12 0x6
MX8MQ_IOMUXC_NAND_DATA07_GPIO3_IO13 0x6
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C1_SCL_I2C1_SCL 0x4000007f
MX8MQ_IOMUXC_I2C1_SDA_I2C1_SDA 0x4000007f
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C2_SCL_I2C2_SCL 0x4000007f
MX8MQ_IOMUXC_I2C2_SDA_I2C2_SDA 0x4000007f
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C3_SCL_I2C3_SCL 0x4000007f
MX8MQ_IOMUXC_I2C3_SDA_I2C3_SDA 0x4000007f
>;
};
pinctrl_i2c4: i2c4grp {
fsl,pins = <
MX8MQ_IOMUXC_I2C4_SCL_I2C4_SCL 0x4000007f
MX8MQ_IOMUXC_I2C4_SDA_I2C4_SDA 0x4000007f
>;
};
pinctrl_mdio_bitbang: bitbangmdiogrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO13_GPIO1_IO13 0x44
MX8MQ_IOMUXC_GPIO1_IO14_GPIO1_IO14 0x64
>;
};
pinctrl_pcie0: pcie0grp {
fsl,pins = <
MX8MQ_IOMUXC_UART4_RXD_PCIE1_CLKREQ_B 0x66
MX8MQ_IOMUXC_GPIO1_IO03_GPIO1_IO3 0x6
>;
};
pinctrl_pcie1: pcie1grp {
fsl,pins = <
MX8MQ_IOMUXC_UART4_TXD_PCIE2_CLKREQ_B 0x66
MX8MQ_IOMUXC_GPIO1_IO06_GPIO1_IO6 0x6
>;
};
pinctrl_reg_arm: regarmgrp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_READY_B_GPIO3_IO16 0x19
>;
};
pinctrl_reg_usdhc2: regusdhc2grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_RESET_B_GPIO2_IO19 0x41
>;
};
pinctrl_switch_irq: switchgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO15_GPIO1_IO15 0x41
>;
};
pinctrl_ts: tsgrp {
fsl,pins = <
MX8MQ_IOMUXC_GPIO1_IO11_GPIO1_IO11 0x96
MX8MQ_IOMUXC_GPIO1_IO12_GPIO1_IO12 0x96
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX8MQ_IOMUXC_UART1_RXD_UART1_DCE_RX 0x49
MX8MQ_IOMUXC_UART1_TXD_UART1_DCE_TX 0x49
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX8MQ_IOMUXC_UART2_RXD_UART2_DCE_RX 0x49
MX8MQ_IOMUXC_UART2_TXD_UART2_DCE_TX 0x49
>;
};
pinctrl_ucs1002: ucs1002grp {
fsl,pins = <
MX8MQ_IOMUXC_NAND_WE_B_GPIO3_IO17 0x41
MX8MQ_IOMUXC_NAND_WP_B_GPIO3_IO18 0x41
>;
};
pinctrl_usbhub: usbhubgrp {
fsl,pins = <
MX8MQ_IOMUXC_SAI5_MCLK_GPIO3_IO25 0x41
>;
};
pinctrl_usdhc1: usdhc1grp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x83
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xc3
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xc3
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xc3
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xc3
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xc3
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xc3
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xc3
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xc3
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xc3
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x83
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
pinctrl_usdhc1_100mhz: usdhc1-100grp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x8d
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xcd
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xcd
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xcd
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xcd
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xcd
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xcd
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xcd
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xcd
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xcd
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x8d
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
pinctrl_usdhc1_200mhz: usdhc1-200grp {
fsl,pins = <
MX8MQ_IOMUXC_SD1_CLK_USDHC1_CLK 0x9f
MX8MQ_IOMUXC_SD1_CMD_USDHC1_CMD 0xdf
MX8MQ_IOMUXC_SD1_DATA0_USDHC1_DATA0 0xdf
MX8MQ_IOMUXC_SD1_DATA1_USDHC1_DATA1 0xdf
MX8MQ_IOMUXC_SD1_DATA2_USDHC1_DATA2 0xdf
MX8MQ_IOMUXC_SD1_DATA3_USDHC1_DATA3 0xdf
MX8MQ_IOMUXC_SD1_DATA4_USDHC1_DATA4 0xdf
MX8MQ_IOMUXC_SD1_DATA5_USDHC1_DATA5 0xdf
MX8MQ_IOMUXC_SD1_DATA6_USDHC1_DATA6 0xdf
MX8MQ_IOMUXC_SD1_DATA7_USDHC1_DATA7 0xdf
MX8MQ_IOMUXC_SD1_STROBE_USDHC1_STROBE 0x9f
MX8MQ_IOMUXC_SD1_RESET_B_USDHC1_RESET_B 0xc1
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc3
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc3
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc3
MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_100mhz: usdhc2-100grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x85
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc5
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc5
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc5
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc5
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc5
MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
pinctrl_usdhc2_200mhz: usdhc2-200grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x87
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc7
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc7
MX8MQ_IOMUXC_SD2_DATA1_USDHC2_DATA1 0xc7
MX8MQ_IOMUXC_SD2_DATA2_USDHC2_DATA2 0xc7
MX8MQ_IOMUXC_SD2_DATA3_USDHC2_DATA3 0xc7
MX8MQ_IOMUXC_GPIO1_IO04_USDHC2_VSELECT 0xc1
>;
};
};