Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /sys/gnu/dts/arm64/rockchip/rk3368-lion-haikou.dts 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
 * Copyright (c) 2018 Theobroma Systems Design und Consulting GmbH
 */

/dts-v1/;
#include "rk3368-lion.dtsi"

/ {
	model = "Theobroma Systems RK3368-uQ7 Baseboard";
	compatible = "tsd,rk3368-lion-haikou", "rockchip,rk3368";

	chosen {
		stdout-path = "serial0:115200n8";
	};

	i2cmux2 {
		i2c@0 {
			eeprom: eeprom@50 {
				compatible = "atmel,24c01";
				pagesize = <8>;
				reg = <0x50>;
			};
		};
	};

	leds {
		pinctrl-0 = <&led_pins_module>, <&led_sd_haikou>;

		sd-card-led {
			label = "sd_card_led";
			gpios = <&gpio0 RK_PD2 GPIO_ACTIVE_HIGH>;
			linux,default-trigger = "mmc0";
		};
	};

	dc_12v: dc-12v {
		compatible = "regulator-fixed";
		regulator-name = "dc_12v";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <12000000>;
		regulator-max-microvolt = <12000000>;
	};

	vcc3v3_baseboard: vcc3v3-baseboard {
		compatible = "regulator-fixed";
		regulator-name = "vcc3v3_baseboard";
		regulator-always-on;
		regulator-boot-on;
		regulator-min-microvolt = <3300000>;
		regulator-max-microvolt = <3300000>;
		vin-supply = <&dc_12v>;
	};

	vcc5v0_otg: vcc5v0-otg-regulator {
		compatible = "regulator-fixed";
		enable-active-high;
		gpio = <&gpio0 RK_PD4 GPIO_ACTIVE_HIGH>;
		pinctrl-names = "default";
		pinctrl-0 = <&otg_vbus_drv>;
		regulator-name = "vcc5v0_otg";
		regulator-always-on;
	};
};

&sdmmc {
	bus-width = <4>;
	cap-mmc-highspeed;
	cap-sd-highspeed;
	cd-gpios = <&gpio2 RK_PB3 GPIO_ACTIVE_LOW>;
	disable-wp;
	max-frequency = <25000000>;
	pinctrl-names = "default";
	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>;
	rockchip,default-sample-phase = <90>;
	vmmc-supply = <&vcc3v3_baseboard>;
	status = "okay";
};

&spi2 {
	cs-gpios = <0>, <&gpio2 RK_PC3 GPIO_ACTIVE_LOW>;
	status = "okay";
};

&usb_otg {
	dr_mode = "otg";
	status = "okay";
};

&uart0 {
	pinctrl-names = "default";
	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
	status = "okay";
};

&uart1 {
	/* alternate function of GPIO5/6 */
	status = "disabled";
};

&pinctrl {
	pinctrl-names = "default";
	pinctrl-0 = <&haikou_pin_hog>;

	hog {
		haikou_pin_hog: haikou-pin-hog {
			rockchip,pins =
				/* LID_BTN */
				<3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
				/* BATLOW# */
				<0 RK_PD6 RK_FUNC_GPIO &pcfg_pull_up>,
				/* SLP_BTN# */
				<3 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
				/* BIOS_DISABLE# */
				<3 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
		};
	};

	leds {
		led_sd_haikou: led-sd-gpio {
			rockchip,pins =
				<0 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	sdmmc {
		sdmmc_cd_gpio: sdmmc-cd-gpio {
			rockchip,pins =
				<2 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};

	usb_otg {
		otg_vbus_drv: otg-vbus-drv {
			rockchip,pins =
				<0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
		};
	};
};