/*
* Copyright (c) 2005 Voltaire Inc. All rights reserved.
* Copyright (c) 2005-2014 Intel Corporation. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#if !defined(RDMA_CMA_H)
#define RDMA_CMA_H
#include <netinet/in.h>
#include <sys/socket.h>
#include <infiniband/verbs.h>
#include <infiniband/sa.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Upon receiving a device removal event, users must destroy the associated
* RDMA identifier and release all resources allocated with the device.
*/
enum rdma_cm_event_type {
RDMA_CM_EVENT_ADDR_RESOLVED,
RDMA_CM_EVENT_ADDR_ERROR,
RDMA_CM_EVENT_ROUTE_RESOLVED,
RDMA_CM_EVENT_ROUTE_ERROR,
RDMA_CM_EVENT_CONNECT_REQUEST,
RDMA_CM_EVENT_CONNECT_RESPONSE,
RDMA_CM_EVENT_CONNECT_ERROR,
RDMA_CM_EVENT_UNREACHABLE,
RDMA_CM_EVENT_REJECTED,
RDMA_CM_EVENT_ESTABLISHED,
RDMA_CM_EVENT_DISCONNECTED,
RDMA_CM_EVENT_DEVICE_REMOVAL,
RDMA_CM_EVENT_MULTICAST_JOIN,
RDMA_CM_EVENT_MULTICAST_ERROR,
RDMA_CM_EVENT_ADDR_CHANGE,
RDMA_CM_EVENT_TIMEWAIT_EXIT
};
enum rdma_port_space {
RDMA_PS_IPOIB = 0x0002,
RDMA_PS_TCP = 0x0106,
RDMA_PS_UDP = 0x0111,
RDMA_PS_IB = 0x013F,
};
#define RDMA_IB_IP_PS_MASK 0xFFFFFFFFFFFF0000ULL
#define RDMA_IB_IP_PORT_MASK 0x000000000000FFFFULL
#define RDMA_IB_IP_PS_TCP 0x0000000001060000ULL
#define RDMA_IB_IP_PS_UDP 0x0000000001110000ULL
#define RDMA_IB_PS_IB 0x00000000013F0000ULL
/*
* Global qkey value for UDP QPs and multicast groups created via the
* RDMA CM.
*/
#define RDMA_UDP_QKEY 0x01234567
struct rdma_ib_addr {
union ibv_gid sgid;
union ibv_gid dgid;
__be16 pkey;
};
struct rdma_addr {
union {
struct sockaddr src_addr;
struct sockaddr_in src_sin;
struct sockaddr_in6 src_sin6;
struct sockaddr_storage src_storage;
};
union {
struct sockaddr dst_addr;
struct sockaddr_in dst_sin;
struct sockaddr_in6 dst_sin6;
struct sockaddr_storage dst_storage;
};
union {
struct rdma_ib_addr ibaddr;
} addr;
};
struct rdma_route {
struct rdma_addr addr;
struct ibv_sa_path_rec *path_rec;
int num_paths;
};
struct rdma_event_channel {
int fd;
};
struct rdma_cm_id {
struct ibv_context *verbs;
struct rdma_event_channel *channel;
void *context;
struct ibv_qp *qp;
struct rdma_route route;
enum rdma_port_space ps;
uint8_t port_num;
struct rdma_cm_event *event;
struct ibv_comp_channel *send_cq_channel;
struct ibv_cq *send_cq;
struct ibv_comp_channel *recv_cq_channel;
struct ibv_cq *recv_cq;
struct ibv_srq *srq;
struct ibv_pd *pd;
enum ibv_qp_type qp_type;
};
enum {
RDMA_MAX_RESP_RES = 0xFF,
RDMA_MAX_INIT_DEPTH = 0xFF
};
struct rdma_conn_param {
const void *private_data;
uint8_t private_data_len;
uint8_t responder_resources;
uint8_t initiator_depth;
uint8_t flow_control;
uint8_t retry_count; /* ignored when accepting */
uint8_t rnr_retry_count;
/* Fields below ignored if a QP is created on the rdma_cm_id. */
uint8_t srq;
uint32_t qp_num;
};
struct rdma_ud_param {
const void *private_data;
uint8_t private_data_len;
struct ibv_ah_attr ah_attr;
uint32_t qp_num;
uint32_t qkey;
};
struct rdma_cm_event {
struct rdma_cm_id *id;
struct rdma_cm_id *listen_id;
enum rdma_cm_event_type event;
int status;
union {
struct rdma_conn_param conn;
struct rdma_ud_param ud;
} param;
};
#define RAI_PASSIVE 0x00000001
#define RAI_NUMERICHOST 0x00000002
#define RAI_NOROUTE 0x00000004
#define RAI_FAMILY 0x00000008
struct rdma_addrinfo {
int ai_flags;
int ai_family;
int ai_qp_type;
int ai_port_space;
socklen_t ai_src_len;
socklen_t ai_dst_len;
struct sockaddr *ai_src_addr;
struct sockaddr *ai_dst_addr;
char *ai_src_canonname;
char *ai_dst_canonname;
size_t ai_route_len;
void *ai_route;
size_t ai_connect_len;
void *ai_connect;
struct rdma_addrinfo *ai_next;
};
/**
* rdma_create_event_channel - Open a channel used to report communication events.
* Description:
* Asynchronous events are reported to users through event channels. Each
* event channel maps to a file descriptor.
* Notes:
* All created event channels must be destroyed by calling
* rdma_destroy_event_channel. Users should call rdma_get_cm_event to
* retrieve events on an event channel.
* See also:
* rdma_get_cm_event, rdma_destroy_event_channel
*/
struct rdma_event_channel *rdma_create_event_channel(void);
/**
* rdma_destroy_event_channel - Close an event communication channel.
* @channel: The communication channel to destroy.
* Description:
* Release all resources associated with an event channel and closes the
* associated file descriptor.
* Notes:
* All rdma_cm_id's associated with the event channel must be destroyed,
* and all returned events must be acked before calling this function.
* See also:
* rdma_create_event_channel, rdma_get_cm_event, rdma_ack_cm_event
*/
void rdma_destroy_event_channel(struct rdma_event_channel *channel);
/**
* rdma_create_id - Allocate a communication identifier.
* @channel: The communication channel that events associated with the
* allocated rdma_cm_id will be reported on.
* @id: A reference where the allocated communication identifier will be
* returned.
* @context: User specified context associated with the rdma_cm_id.
* @ps: RDMA port space.
* Description:
* Creates an identifier that is used to track communication information.
* Notes:
* Rdma_cm_id's are conceptually equivalent to a socket for RDMA
* communication. The difference is that RDMA communication requires
* explicitly binding to a specified RDMA device before communication
* can occur, and most operations are asynchronous in nature. Communication
* events on an rdma_cm_id are reported through the associated event
* channel. Users must release the rdma_cm_id by calling rdma_destroy_id.
* See also:
* rdma_create_event_channel, rdma_destroy_id, rdma_get_devices,
* rdma_bind_addr, rdma_resolve_addr, rdma_connect, rdma_listen,
*/
int rdma_create_id(struct rdma_event_channel *channel,
struct rdma_cm_id **id, void *context,
enum rdma_port_space ps);
/**
* rdma_create_ep - Allocate a communication identifier and qp.
* @id: A reference where the allocated communication identifier will be
* returned.
* @res: Result from rdma_getaddrinfo, which specifies the source and
* destination addresses, plus optional routing and connection information.
* @pd: Optional protection domain. This parameter is ignored if qp_init_attr
* is NULL.
* @qp_init_attr: Optional attributes for a QP created on the rdma_cm_id.
* Description:
* Create an identifier and option QP used for communication.
* Notes:
* If qp_init_attr is provided, then a queue pair will be allocated and
* associated with the rdma_cm_id. If a pd is provided, the QP will be
* created on that PD. Otherwise, the QP will be allocated on a default
* PD.
* The rdma_cm_id will be set to use synchronous operations (connect,
* listen, and get_request). To convert to asynchronous operation, the
* rdma_cm_id should be migrated to a user allocated event channel.
* See also:
* rdma_create_id, rdma_create_qp, rdma_migrate_id, rdma_connect,
* rdma_listen
*/
int rdma_create_ep(struct rdma_cm_id **id, struct rdma_addrinfo *res,
struct ibv_pd *pd, struct ibv_qp_init_attr *qp_init_attr);
/**
* rdma_destroy_ep - Deallocates a communication identifier and qp.
* @id: The communication identifier to destroy.
* Description:
* Destroys the specified rdma_cm_id and any associated QP created
* on that id.
* See also:
* rdma_create_ep
*/
void rdma_destroy_ep(struct rdma_cm_id *id);
/**
* rdma_destroy_id - Release a communication identifier.
* @id: The communication identifier to destroy.
* Description:
* Destroys the specified rdma_cm_id and cancels any outstanding
* asynchronous operation.
* Notes:
* Users must free any associated QP with the rdma_cm_id before
* calling this routine and ack an related events.
* See also:
* rdma_create_id, rdma_destroy_qp, rdma_ack_cm_event
*/
int rdma_destroy_id(struct rdma_cm_id *id);
/**
* rdma_bind_addr - Bind an RDMA identifier to a source address.
* @id: RDMA identifier.
* @addr: Local address information. Wildcard values are permitted.
* Description:
* Associates a source address with an rdma_cm_id. The address may be
* wildcarded. If binding to a specific local address, the rdma_cm_id
* will also be bound to a local RDMA device.
* Notes:
* Typically, this routine is called before calling rdma_listen to bind
* to a specific port number, but it may also be called on the active side
* of a connection before calling rdma_resolve_addr to bind to a specific
* address.
* See also:
* rdma_create_id, rdma_listen, rdma_resolve_addr, rdma_create_qp
*/
int rdma_bind_addr(struct rdma_cm_id *id, struct sockaddr *addr);
/**
* rdma_resolve_addr - Resolve destination and optional source addresses.
* @id: RDMA identifier.
* @src_addr: Source address information. This parameter may be NULL.
* @dst_addr: Destination address information.
* @timeout_ms: Time to wait for resolution to complete.
* Description:
* Resolve destination and optional source addresses from IP addresses
* to an RDMA address. If successful, the specified rdma_cm_id will
* be bound to a local device.
* Notes:
* This call is used to map a given destination IP address to a usable RDMA
* address. If a source address is given, the rdma_cm_id is bound to that
* address, the same as if rdma_bind_addr were called. If no source
* address is given, and the rdma_cm_id has not yet been bound to a device,
* then the rdma_cm_id will be bound to a source address based on the
* local routing tables. After this call, the rdma_cm_id will be bound to
* an RDMA device. This call is typically made from the active side of a
* connection before calling rdma_resolve_route and rdma_connect.
* See also:
* rdma_create_id, rdma_resolve_route, rdma_connect, rdma_create_qp,
* rdma_get_cm_event, rdma_bind_addr
*/
int rdma_resolve_addr(struct rdma_cm_id *id, struct sockaddr *src_addr,
struct sockaddr *dst_addr, int timeout_ms);
/**
* rdma_resolve_route - Resolve the route information needed to establish a connection.
* @id: RDMA identifier.
* @timeout_ms: Time to wait for resolution to complete.
* Description:
* Resolves an RDMA route to the destination address in order to establish
* a connection. The destination address must have already been resolved
* by calling rdma_resolve_addr.
* Notes:
* This is called on the client side of a connection after calling
* rdma_resolve_addr, but before calling rdma_connect.
* See also:
* rdma_resolve_addr, rdma_connect, rdma_get_cm_event
*/
int rdma_resolve_route(struct rdma_cm_id *id, int timeout_ms);
/**
* rdma_create_qp - Allocate a QP.
* @id: RDMA identifier.
* @pd: Optional protection domain for the QP.
* @qp_init_attr: initial QP attributes.
* Description:
* Allocate a QP associated with the specified rdma_cm_id and transition it
* for sending and receiving.
* Notes:
* The rdma_cm_id must be bound to a local RDMA device before calling this
* function, and the protection domain must be for that same device.
* QPs allocated to an rdma_cm_id are automatically transitioned by the
* librdmacm through their states. After being allocated, the QP will be
* ready to handle posting of receives. If the QP is unconnected, it will
* be ready to post sends.
* If pd is NULL, then the QP will be allocated using a default protection
* domain associated with the underlying RDMA device.
* See also:
* rdma_bind_addr, rdma_resolve_addr, rdma_destroy_qp, ibv_create_qp,
* ibv_modify_qp
*/
int rdma_create_qp(struct rdma_cm_id *id, struct ibv_pd *pd,
struct ibv_qp_init_attr *qp_init_attr);
int rdma_create_qp_ex(struct rdma_cm_id *id,
struct ibv_qp_init_attr_ex *qp_init_attr);
/**
* rdma_destroy_qp - Deallocate a QP.
* @id: RDMA identifier.
* Description:
* Destroy a QP allocated on the rdma_cm_id.
* Notes:
* Users must destroy any QP associated with an rdma_cm_id before
* destroying the ID.
* See also:
* rdma_create_qp, rdma_destroy_id, ibv_destroy_qp
*/
void rdma_destroy_qp(struct rdma_cm_id *id);
/**
* rdma_connect - Initiate an active connection request.
* @id: RDMA identifier.
* @conn_param: optional connection parameters.
* Description:
* For a connected rdma_cm_id, this call initiates a connection request
* to a remote destination. For an unconnected rdma_cm_id, it initiates
* a lookup of the remote QP providing the datagram service.
* Notes:
* Users must have resolved a route to the destination address
* by having called rdma_resolve_route before calling this routine.
* A user may override the default connection parameters and exchange
* private data as part of the connection by using the conn_param parameter.
* See also:
* rdma_resolve_route, rdma_disconnect, rdma_listen, rdma_get_cm_event
*/
int rdma_connect(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
/**
* rdma_listen - Listen for incoming connection requests.
* @id: RDMA identifier.
* @backlog: backlog of incoming connection requests.
* Description:
* Initiates a listen for incoming connection requests or datagram service
* lookup. The listen will be restricted to the locally bound source
* address.
* Notes:
* Users must have bound the rdma_cm_id to a local address by calling
* rdma_bind_addr before calling this routine. If the rdma_cm_id is
* bound to a specific IP address, the listen will be restricted to that
* address and the associated RDMA device. If the rdma_cm_id is bound
* to an RDMA port number only, the listen will occur across all RDMA
* devices.
* See also:
* rdma_bind_addr, rdma_connect, rdma_accept, rdma_reject, rdma_get_cm_event
*/
int rdma_listen(struct rdma_cm_id *id, int backlog);
/**
* rdma_get_request
*/
int rdma_get_request(struct rdma_cm_id *listen, struct rdma_cm_id **id);
/**
* rdma_accept - Called to accept a connection request.
* @id: Connection identifier associated with the request.
* @conn_param: Optional information needed to establish the connection.
* Description:
* Called from the listening side to accept a connection or datagram
* service lookup request.
* Notes:
* Unlike the socket accept routine, rdma_accept is not called on a
* listening rdma_cm_id. Instead, after calling rdma_listen, the user
* waits for a connection request event to occur. Connection request
* events give the user a newly created rdma_cm_id, similar to a new
* socket, but the rdma_cm_id is bound to a specific RDMA device.
* rdma_accept is called on the new rdma_cm_id.
* A user may override the default connection parameters and exchange
* private data as part of the connection by using the conn_param parameter.
* See also:
* rdma_listen, rdma_reject, rdma_get_cm_event
*/
int rdma_accept(struct rdma_cm_id *id, struct rdma_conn_param *conn_param);
/**
* rdma_reject - Called to reject a connection request.
* @id: Connection identifier associated with the request.
* @private_data: Optional private data to send with the reject message.
* @private_data_len: Size of the private_data to send, in bytes.
* Description:
* Called from the listening side to reject a connection or datagram
* service lookup request.
* Notes:
* After receiving a connection request event, a user may call rdma_reject
* to reject the request. If the underlying RDMA transport supports
* private data in the reject message, the specified data will be passed to
* the remote side.
* See also:
* rdma_listen, rdma_accept, rdma_get_cm_event
*/
int rdma_reject(struct rdma_cm_id *id, const void *private_data,
uint8_t private_data_len);
/**
* rdma_notify - Notifies the librdmacm of an asynchronous event.
* @id: RDMA identifier.
* @event: Asynchronous event.
* Description:
* Used to notify the librdmacm of asynchronous events that have occurred
* on a QP associated with the rdma_cm_id.
* Notes:
* Asynchronous events that occur on a QP are reported through the user's
* device event handler. This routine is used to notify the librdmacm of
* communication events. In most cases, use of this routine is not
* necessary, however if connection establishment is done out of band
* (such as done through Infiniband), it's possible to receive data on a
* QP that is not yet considered connected. This routine forces the
* connection into an established state in this case in order to handle
* the rare situation where the connection never forms on its own.
* Events that should be reported to the CM are: IB_EVENT_COMM_EST.
* See also:
* rdma_connect, rdma_accept, rdma_listen
*/
int rdma_notify(struct rdma_cm_id *id, enum ibv_event_type event);
/**
* rdma_disconnect - This function disconnects a connection.
* @id: RDMA identifier.
* Description:
* Disconnects a connection and transitions any associated QP to the
* error state.
* See also:
* rdma_connect, rdma_listen, rdma_accept
*/
int rdma_disconnect(struct rdma_cm_id *id);
/**
* rdma_join_multicast - Joins a multicast group.
* @id: Communication identifier associated with the request.
* @addr: Multicast address identifying the group to join.
* @context: User-defined context associated with the join request.
* Description:
* Joins a multicast group and attaches an associated QP to the group.
* Notes:
* Before joining a multicast group, the rdma_cm_id must be bound to
* an RDMA device by calling rdma_bind_addr or rdma_resolve_addr. Use of
* rdma_resolve_addr requires the local routing tables to resolve the
* multicast address to an RDMA device. The user must call
* rdma_leave_multicast to leave the multicast group and release any
* multicast resources. The context is returned to the user through
* the private_data field in the rdma_cm_event.
* See also:
* rdma_leave_multicast, rdma_bind_addr, rdma_resolve_addr, rdma_create_qp
*/
int rdma_join_multicast(struct rdma_cm_id *id, struct sockaddr *addr,
void *context);
/**
* rdma_leave_multicast - Leaves a multicast group.
* @id: Communication identifier associated with the request.
* @addr: Multicast address identifying the group to leave.
* Description:
* Leaves a multicast group and detaches an associated QP from the group.
* Notes:
* Calling this function before a group has been fully joined results in
* canceling the join operation. Users should be aware that messages
* received from the multicast group may stilled be queued for
* completion processing immediately after leaving a multicast group.
* Destroying an rdma_cm_id will automatically leave all multicast groups.
* See also:
* rdma_join_multicast, rdma_destroy_qp
*/
int rdma_leave_multicast(struct rdma_cm_id *id, struct sockaddr *addr);
/**
* rdma_get_cm_event - Retrieves the next pending communication event.
* @channel: Event channel to check for events.
* @event: Allocated information about the next communication event.
* Description:
* Retrieves a communication event. If no events are pending, by default,
* the call will block until an event is received.
* Notes:
* The default synchronous behavior of this routine can be changed by
* modifying the file descriptor associated with the given channel. All
* events that are reported must be acknowledged by calling rdma_ack_cm_event.
* Destruction of an rdma_cm_id will block until related events have been
* acknowledged.
* See also:
* rdma_ack_cm_event, rdma_create_event_channel, rdma_event_str
*/
int rdma_get_cm_event(struct rdma_event_channel *channel,
struct rdma_cm_event **event);
/**
* rdma_ack_cm_event - Free a communication event.
* @event: Event to be released.
* Description:
* All events which are allocated by rdma_get_cm_event must be released,
* there should be a one-to-one correspondence between successful gets
* and acks.
* See also:
* rdma_get_cm_event, rdma_destroy_id
*/
int rdma_ack_cm_event(struct rdma_cm_event *event);
__be16 rdma_get_src_port(struct rdma_cm_id *id);
__be16 rdma_get_dst_port(struct rdma_cm_id *id);
static inline struct sockaddr *rdma_get_local_addr(struct rdma_cm_id *id)
{
return &id->route.addr.src_addr;
}
static inline struct sockaddr *rdma_get_peer_addr(struct rdma_cm_id *id)
{
return &id->route.addr.dst_addr;
}
/**
* rdma_get_devices - Get list of RDMA devices currently available.
* @num_devices: If non-NULL, set to the number of devices returned.
* Description:
* Return a NULL-terminated array of opened RDMA devices. Callers can use
* this routine to allocate resources on specific RDMA devices that will be
* shared across multiple rdma_cm_id's.
* Notes:
* The returned array must be released by calling rdma_free_devices. Devices
* remain opened while the librdmacm is loaded.
* See also:
* rdma_free_devices
*/
struct ibv_context **rdma_get_devices(int *num_devices);
/**
* rdma_free_devices - Frees the list of devices returned by rdma_get_devices.
* @list: List of devices returned from rdma_get_devices.
* Description:
* Frees the device array returned by rdma_get_devices.
* See also:
* rdma_get_devices
*/
void rdma_free_devices(struct ibv_context **list);
/**
* rdma_event_str - Returns a string representation of an rdma cm event.
* @event: Asynchronous event.
* Description:
* Returns a string representation of an asynchronous event.
* See also:
* rdma_get_cm_event
*/
const char *rdma_event_str(enum rdma_cm_event_type event);
/* Option levels */
enum {
RDMA_OPTION_ID = 0,
RDMA_OPTION_IB = 1
};
/* Option details */
enum {
RDMA_OPTION_ID_TOS = 0, /* uint8_t: RFC 2474 */
RDMA_OPTION_ID_REUSEADDR = 1, /* int: ~SO_REUSEADDR */
RDMA_OPTION_ID_AFONLY = 2, /* int: ~IPV6_V6ONLY */
RDMA_OPTION_IB_PATH = 1 /* struct ibv_path_data[] */
};
/**
* rdma_set_option - Set options for an rdma_cm_id.
* @id: Communication identifier to set option for.
* @level: Protocol level of the option to set.
* @optname: Name of the option to set.
* @optval: Reference to the option data.
* @optlen: The size of the %optval buffer.
*/
int rdma_set_option(struct rdma_cm_id *id, int level, int optname,
void *optval, size_t optlen);
/**
* rdma_migrate_id - Move an rdma_cm_id to a new event channel.
* @id: Communication identifier to migrate.
* @channel: New event channel for rdma_cm_id events.
*/
int rdma_migrate_id(struct rdma_cm_id *id, struct rdma_event_channel *channel);
/**
* rdma_getaddrinfo - RDMA address and route resolution service.
*/
int rdma_getaddrinfo(const char *node, const char *service,
const struct rdma_addrinfo *hints,
struct rdma_addrinfo **res);
void rdma_freeaddrinfo(struct rdma_addrinfo *res);
#ifdef __cplusplus
}
#endif
#endif /* RDMA_CMA_H */