/*
* Copyright 2008-2013 Freescale Semiconductor Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef __FSL_FMAN_DTSEC_MII_ACC_H
#define __FSL_FMAN_DTSEC_MII_ACC_H
#include "common/general.h"
/* MII Management Configuration Register */
#define MIIMCFG_RESET_MGMT 0x80000000
#define MIIMCFG_MGNTCLK_MASK 0x00000007
#define MIIMCFG_MGNTCLK_SHIFT 0
/* MII Management Command Register */
#define MIIMCOM_SCAN_CYCLE 0x00000002
#define MIIMCOM_READ_CYCLE 0x00000001
/* MII Management Address Register */
#define MIIMADD_PHY_ADDR_SHIFT 8
#define MIIMADD_PHY_ADDR_MASK 0x00001f00
#define MIIMADD_REG_ADDR_SHIFT 0
#define MIIMADD_REG_ADDR_MASK 0x0000001f
/* MII Management Indicator Register */
#define MIIMIND_BUSY 0x00000001
/* PHY Control Register */
#define PHY_CR_PHY_RESET 0x8000
#define PHY_CR_LOOPBACK 0x4000
#define PHY_CR_SPEED0 0x2000
#define PHY_CR_ANE 0x1000
#define PHY_CR_RESET_AN 0x0200
#define PHY_CR_FULLDUPLEX 0x0100
#define PHY_CR_SPEED1 0x0040
#define PHY_TBICON_SRESET 0x8000
#define PHY_TBICON_SPEED2 0x0020
#define PHY_TBICON_CLK_SEL 0x0020
#define PHY_TBIANA_SGMII 0x4001
#define PHY_TBIANA_1000X 0x01a0
/* register map */
/* MII Configuration Control Memory Map Registers */
struct dtsec_mii_reg {
uint32_t reserved1[72];
uint32_t miimcfg; /* MII Mgmt:configuration */
uint32_t miimcom; /* MII Mgmt:command */
uint32_t miimadd; /* MII Mgmt:address */
uint32_t miimcon; /* MII Mgmt:control 3 */
uint32_t miimstat; /* MII Mgmt:status */
uint32_t miimind; /* MII Mgmt:indicators */
};
/* dTSEC MII API */
/* functions to access the mii registers for phy configuration.
* this functionality may not be available for all dtsecs in the system.
* consult the reference manual for details */
void fman_dtsec_mii_reset(struct dtsec_mii_reg *regs);
/* frequency is in MHz.
* note that dtsec clock is 1/2 of fman clock */
void fman_dtsec_mii_init(struct dtsec_mii_reg *regs, uint16_t dtsec_freq);
int fman_dtsec_mii_write_reg(struct dtsec_mii_reg *regs,
uint8_t addr,
uint8_t reg,
uint16_t data,
uint16_t dtsec_freq);
int fman_dtsec_mii_read_reg(struct dtsec_mii_reg *regs,
uint8_t addr,
uint8_t reg,
uint16_t *data,
uint16_t dtsec_freq);
#endif /* __FSL_FMAN_DTSEC_MII_ACC_H */