/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2000,2001 Jonathan Chen.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the TDK 78Q2120 MII
*
* References:
* Datasheet for the 78Q2120 - http://www.tsc.tdk.com/lan/78q2120.pdf
* Most of this code stolen from ukphy.c
*/
/*
* The TDK 78Q2120 is found on some Xircom X3201 based CardBus cards,
* also spotted on some 3C575 cards. It's just like any other normal
* phy, except it does auto negotiation in a different way.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/errno.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/tdkphyreg.h>
#include "miibus_if.h"
static int tdkphy_probe(device_t);
static int tdkphy_attach(device_t);
static device_method_t tdkphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, tdkphy_probe),
DEVMETHOD(device_attach, tdkphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static devclass_t tdkphy_devclass;
static driver_t tdkphy_driver = {
"tdkphy",
tdkphy_methods,
sizeof(struct mii_softc)
};
DRIVER_MODULE(tdkphy, miibus, tdkphy_driver, tdkphy_devclass, 0, 0);
static int tdkphy_service(struct mii_softc *, struct mii_data *, int);
static void tdkphy_status(struct mii_softc *);
static const struct mii_phydesc tdkphys[] = {
MII_PHY_DESC(xxTSC, 78Q2120),
MII_PHY_END
};
static const struct mii_phy_funcs tdkphy_funcs = {
tdkphy_service,
tdkphy_status,
mii_phy_reset
};
static int
tdkphy_probe(device_t dev)
{
return (mii_phy_dev_probe(dev, tdkphys, BUS_PROBE_DEFAULT));
}
static int
tdkphy_attach(device_t dev)
{
mii_phy_dev_attach(dev, MIIF_NOMANPAUSE, &tdkphy_funcs, 1);
return (0);
}
static int
tdkphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
switch (cmd) {
case MII_POLLSTAT:
break;
case MII_MEDIACHG:
mii_phy_setmedia(sc);
break;
case MII_TICK:
if (mii_phy_tick(sc) == EJUSTRETURN)
return (0);
break;
}
/* Update the media status. */
PHY_STATUS(sc);
if (sc->mii_pdata->mii_media_active & IFM_FDX)
PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) | BMCR_FDX);
else
PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) & ~BMCR_FDX);
/* Callback if something changed. */
mii_phy_update(sc, cmd);
return (0);
}
static void
tdkphy_status(struct mii_softc *phy)
{
struct mii_data *mii = phy->mii_pdata;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
int bmsr, bmcr, anlpar, diag;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR);
if (bmsr & BMSR_LINK)
mii->mii_media_status |= IFM_ACTIVE;
bmcr = PHY_READ(phy, MII_BMCR);
if (bmcr & BMCR_ISO) {
mii->mii_media_active |= IFM_NONE;
mii->mii_media_status = 0;
return;
}
if (bmcr & BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
if (bmcr & BMCR_AUTOEN) {
/*
* NWay autonegotiation takes the highest-order common
* bit of the ANAR and ANLPAR (i.e. best media advertised
* both by us and our link partner).
*/
if ((bmsr & BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
anlpar = PHY_READ(phy, MII_ANAR) & PHY_READ(phy, MII_ANLPAR);
/*
* ANLPAR doesn't get set on my card, but we check it anyway,
* since it is mentioned in the 78Q2120 specs.
*/
if (anlpar & ANLPAR_TX_FD)
mii->mii_media_active |= IFM_100_TX|IFM_FDX;
else if (anlpar & ANLPAR_T4)
mii->mii_media_active |= IFM_100_T4|IFM_HDX;
else if (anlpar & ANLPAR_TX)
mii->mii_media_active |= IFM_100_TX|IFM_HDX;
else if (anlpar & ANLPAR_10_FD)
mii->mii_media_active |= IFM_10_T|IFM_FDX;
else if (anlpar & ANLPAR_10)
mii->mii_media_active |= IFM_10_T|IFM_HDX;
else {
/*
* ANLPAR isn't set, which leaves two possibilities:
* 1) Auto negotiation failed
* 2) Auto negotiation completed, but the card forgot
* to set ANLPAR.
* So we check the MII_DIAG(18) register...
*/
diag = PHY_READ(phy, MII_DIAG);
if (diag & DIAG_NEGFAIL) /* assume 10baseT if no neg */
mii->mii_media_active |= IFM_10_T|IFM_HDX;
else {
if (diag & DIAG_DUPLEX)
mii->mii_media_active |= IFM_FDX;
else
mii->mii_media_active |= IFM_HDX;
if (diag & DIAG_RATE_100)
mii->mii_media_active |= IFM_100_TX;
else
mii->mii_media_active |= IFM_10_T;
}
}
if ((mii->mii_media_active & IFM_FDX) != 0)
mii->mii_media_active |= mii_phy_flowstatus(phy);
} else
mii->mii_media_active = ife->ifm_media;
}