Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

/*-
 * Copyright (c) 2017 Ruslan Bukin <br@bsdpad.com>
 * All rights reserved.
 *
 * This software was developed by SRI International and the University of
 * Cambridge Computer Laboratory under DARPA/AFRL contract FA8750-10-C-0237
 * ("CTSRD"), as part of the DARPA CRASH research programme.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * $FreeBSD$
 */

/dts-v1/;
#include "socfpga_arria10_socdk.dtsi"

/ {
	model = "Altera SOCFPGA Arria 10";
	compatible = "altr,socfpga-arria10", "altr,socfpga";

	/* Reserve first page for secondary CPU trampoline code */
	memreserve = < 0x00000000 0x1000 >;

	soc {
		/* Local timer */
		timer@ffffc600 {
			clock-frequency = <200000000>;
		};

		/* Global timer */
		global_timer: timer@ffffc200 {
			compatible = "arm,cortex-a9-global-timer";
			reg = <0xffffc200 0x20>;
			interrupts = <1 11 0x301>;
			clock-frequency = <200000000>;
		};
	};

	chosen {
		stdin = "serial1";
		stdout = "serial1";
	};
};

&uart1 {
	clock-frequency = < 50000000 >;
};

&mmc {
	status = "okay";
	num-slots = <1>;
	cap-sd-highspeed;
	broken-cd;
	bus-width = <4>;
	bus-frequency = <200000000>;
};

&i2c1 {
	lcd@28 {
		compatible = "newhaven,nhd-0216k3z-nsw-bbw";
		reg = <0x28>;
	};
};

&usb0 {
	dr_mode = "host";
};

&qspi {
	status = "okay";

	dmas = <&pdma 24>, <&pdma 25>;
	dma-names = "tx", "rx";

	flash0: n25q00@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		compatible = "n25q00aa";
		reg = <0>;
		spi-max-frequency = <100000000>;

		m25p,fast-read;
		cdns,page-size = <256>;
		cdns,block-size = <16>;
		cdns,read-delay = <4>;
		cdns,tshsl-ns = <50>;
		cdns,tsd2d-ns = <50>;
		cdns,tchsh-ns = <4>;
		cdns,tslch-ns = <4>;

		partition@qspi-boot {
			label = "boot";
			reg = <0x0 0x2720000>;
		};

		partition@qspi-rootfs {
			label = "rootfs";
			reg = <0x2720000 0x58E0000>;
		};
	};
};