// SPDX-License-Identifier: GPL-2.0-only
/* Copyright (c) 2013-2016, The Linux Foundation. All rights reserved.
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/qcom,gcc-msm8994.h>
/ {
model = "Qualcomm Technologies, Inc. MSM 8992";
compatible = "qcom,msm8992";
// msm-id needed by bootloader for selecting correct blob
qcom,msm-id = <251 0>, <252 0>;
interrupt-parent = <&intc>;
#address-cells = <2>;
#size-cells = <2>;
chosen { };
cpus {
#address-cells = <2>;
#size-cells = <0>;
cpu-map {
cluster0 {
core0 {
cpu = <&CPU0>;
};
};
};
CPU0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a53";
reg = <0x0 0x0>;
next-level-cache = <&L2_0>;
L2_0: l2-cache {
compatible = "cache";
cache-level = <2>;
};
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
xo_board: xo_board {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <19200000>;
};
sleep_clk: sleep_clk {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <32768>;
};
vreg_vph_pwr: vreg-vph-pwr {
compatible = "regulator-fixed";
status = "okay";
regulator-name = "vph-pwr";
regulator-min-microvolt = <3600000>;
regulator-max-microvolt = <3600000>;
regulator-always-on;
};
sfpb_mutex: hwmutex {
compatible = "qcom,sfpb-mutex";
syscon = <&sfpb_mutex_regs 0x0 0x100>;
#hwlock-cells = <1>;
};
smem {
compatible = "qcom,smem";
memory-region = <&smem_region>;
qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&sfpb_mutex 3>;
};
soc {
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 0 0 0xffffffff>;
compatible = "simple-bus";
intc: interrupt-controller@f9000000 {
compatible = "qcom,msm-qgic2";
interrupt-controller;
#interrupt-cells = <3>;
reg = <0xf9000000 0x1000>,
<0xf9002000 0x1000>;
};
apcs: syscon@f900d000 {
compatible = "syscon";
reg = <0xf900d000 0x2000>;
};
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
ranges;
compatible = "arm,armv7-timer-mem";
reg = <0xf9020000 0x1000>;
frame@f9021000 {
frame-number = <0>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9021000 0x1000>,
<0xf9022000 0x1000>;
};
frame@f9023000 {
frame-number = <1>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9023000 0x1000>;
status = "disabled";
};
frame@f9024000 {
frame-number = <2>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9024000 0x1000>;
status = "disabled";
};
frame@f9025000 {
frame-number = <3>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9025000 0x1000>;
status = "disabled";
};
frame@f9026000 {
frame-number = <4>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9026000 0x1000>;
status = "disabled";
};
frame@f9027000 {
frame-number = <5>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9027000 0x1000>;
status = "disabled";
};
frame@f9028000 {
frame-number = <6>;
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
reg = <0xf9028000 0x1000>;
status = "disabled";
};
};
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
};
msmgpio: pinctrl@fd510000 {
compatible = "qcom,msm8994-pinctrl";
reg = <0xfd510000 0x4000>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
gpio-ranges = <&msmgpio 0 0 146>;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_LOW>;
status = "disabled";
clock-names = "core", "iface";
clocks = <&clock_gcc GCC_BLSP1_UART2_APPS_CLK>,
<&clock_gcc GCC_BLSP1_AHB_CLK>;
};
clock_gcc: clock-controller@fc400000 {
compatible = "qcom,gcc-msm8994";
#clock-cells = <1>;
#reset-cells = <1>;
#power-domain-cells = <1>;
reg = <0xfc400000 0x2000>;
};
sdhci1: mmc@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
reg-names = "hc_mem", "core_mem";
interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>,
<GIC_SPI 138 IRQ_TYPE_NONE>;
interrupt-names = "hc_irq", "pwr_irq";
clocks = <&clock_gcc GCC_SDCC1_APPS_CLK>,
<&clock_gcc GCC_SDCC1_AHB_CLK>;
clock-names = "core", "iface";
pinctrl-names = "default", "sleep";
pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
&sdc1_rclk_on>;
pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
&sdc1_rclk_off>;
regulator-always-on;
bus-width = <8>;
mmc-hs400-1_8v;
status = "okay";
};
rpm_msg_ram: memory@fc428000 {
compatible = "qcom,rpm-msg-ram";
reg = <0xfc428000 0x4000>;
};
sfpb_mutex_regs: syscon@fd484000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "syscon";
reg = <0xfd484000 0x400>;
};
};
memory {
device_type = "memory";
reg = <0 0 0 0>; // bootloader will update
};
reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
ranges;
smem_region: smem@6a00000 {
reg = <0x0 0x6a00000 0x0 0x200000>;
no-map;
};
};
smd_rpm: smd {
compatible = "qcom,smd";
rpm {
interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
qcom,ipc = <&apcs 8 0>;
qcom,smd-edge = <15>;
qcom,local-pid = <0>;
qcom,remote-pid = <6>;
rpm-requests {
compatible = "qcom,rpm-msm8994";
qcom,smd-channels = "rpm_requests";
pm8994-regulators {
compatible = "qcom,rpm-pm8994-regulators";
pm8994_s1: s1 {};
pm8994_s2: s2 {};
pm8994_s3: s3 {};
pm8994_s4: s4 {};
pm8994_s5: s5 {};
pm8994_s6: s6 {};
pm8994_s7: s7 {};
pm8994_l1: l1 {};
pm8994_l2: l2 {};
pm8994_l3: l3 {};
pm8994_l4: l4 {};
pm8994_l6: l6 {};
pm8994_l8: l8 {};
pm8994_l9: l9 {};
pm8994_l10: l10 {};
pm8994_l11: l11 {};
pm8994_l12: l12 {};
pm8994_l13: l13 {};
pm8994_l14: l14 {};
pm8994_l15: l15 {};
pm8994_l16: l16 {};
pm8994_l17: l17 {};
pm8994_l18: l18 {};
pm8994_l19: l19 {};
pm8994_l20: l20 {};
pm8994_l21: l21 {};
pm8994_l22: l22 {};
pm8994_l23: l23 {};
pm8994_l24: l24 {};
pm8994_l25: l25 {};
pm8994_l26: l26 {};
pm8994_l27: l27 {};
pm8994_l28: l28 {};
pm8994_l29: l29 {};
pm8994_l30: l30 {};
pm8994_l31: l31 {};
pm8994_l32: l32 {};
pm8994_lvs1: lvs1 {};
pm8994_lvs2: lvs2 {};
};
};
};
};
};
#include "msm8992-pins.dtsi"