/*
* /src/NTP/REPOSITORY/ntp4-dev/include/mbg_gps166.h,v 4.7 2006/06/22 18:41:43 kardel RELEASE_20060622_A
*
* mbg_gps166.h,v 4.7 2006/06/22 18:41:43 kardel RELEASE_20060622_A
*
* $Created: Sun Jul 20 09:20:50 1997 $
*
* File GPSSERIO.H Copyright (c) by Meinberg Funkuhren (www.meinberg.de)
*
* Linkage to PARSE:
* Copyright (c) 1997-2005 by Frank Kardel <kardel <AT> ntp.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the author nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#ifndef MBG_GPS166_H
#define MBG_GPS166_H
/***************************************************************************
*
* Definitions taken from Meinberg's gpsserio.h and gpsdefs.h files.
*
* Author: Martin Burnicki, Meinberg Funkuhren
*
* Copyright (c) Meinberg Funkuhren, Bad Pyrmont, Germany
*
* Description:
* Structures and codes to be used to access Meinberg GPS clocks via
* their serial interface COM0. COM0 should be set to a high baud rate,
* default is 19200.
*
* Standard Meinberg GPS serial operation is to send the Meinberg
* standard time string automatically once per second, once per
* minute, or on request per ASCII '?'.
*
* GPS parameter setup or parameter readout uses blocks of binary
* data which have to be isolated from the standard string. A block
* of data starts with a SOH code (ASCII Start Of Header, 0x01)
* followed by a message header with constant length and a block of
* data with variable length.
*
* The first field (cmd) of the message header holds the command
* code resp. the type of data to be transmitted. The next field (len)
* gives the number of data bytes that follow the header. This number
* ranges from 0 to sizeof( MSG_DATA ). The third field (data_csum)
* holds a checksum of all data bytes and the last field of the header
* finally holds the checksum of the header itself.
*
***************************************************************************/
/**
* @brief GPS epoch bias from ordinary time_t epoch
*
* The Unix time_t epoch is usually 1970-01-01 00:00 whereas
* the GPS epoch is 1980-01-06 00:00, so the difference is 10 years,
* plus 2 days due to leap years (1972 and 1976), plus the difference
* of the day-of-month (6 - 1), so:<br>
*
* time_t t = ( gps_week * ::SECS_PER_WEEK ) + sec_of_week + ::GPS_SEC_BIAS
*/
#define GPS_SEC_BIAS 315964800UL // ( ( ( 10UL * 365UL ) + 2 + 5 ) * SECS_PER_DAY )
#ifndef _COM_HS_DEFINED
/**
* @brief Enumeration of handshake modes
*/
enum COM_HANSHAKE_MODES { HS_NONE, HS_XONXOFF, HS_RTSCTS, N_COM_HS };
#define _COM_HS_DEFINED
#endif
#ifndef _COM_PARM_DEFINED
/**
* @brief A data type to configure a serial port's baud rate
*
* @see ::MBG_BAUD_RATES
*/
typedef int32_t BAUD_RATE;
/**
* @brief Indices used to identify a parameter in the framing string
*
* @see ::MBG_FRAMING_STRS
*/
enum MBG_FRAMING_STR_IDXS { F_DBITS, F_PRTY, F_STBITS };
/**
* @brief A structure to store the configuration of a serial port
*/
typedef struct
{
BAUD_RATE baud_rate; ///< transmission speed, e.g. 19200L, see ::MBG_BAUD_RATES
char framing[4]; ///< ASCIIZ framing string, e.g. "8N1" or "7E2", see ::MBG_FRAMING_STRS
int16_t handshake; ///< handshake mode, yet only ::HS_NONE supported
} COM_PARM;
#define _COM_PARM_DEFINED
#endif
/**
* @brief Enumeration of modes supported for time string transmission
*
* This determines e.g. at which point in time a string starts
* to be transmitted via the serial port.
* Used with ::PORT_SETTINGS::mode.
*
* @see ::STR_MODE_MASKS
*/
enum STR_MODES
{
STR_ON_REQ, ///< transmission on request by received '?' character only
STR_PER_SEC, ///< transmission automatically if second changes
STR_PER_MIN, ///< transmission automatically if minute changes
STR_AUTO, ///< transmission automatically if required, e.g. on capture event
STR_ON_REQ_SEC, ///< transmission if second changes and a request has been received before
N_STR_MODE ///< the number of known modes
};
/**
* The number of serial ports which are at least available
* even with very old GPS receiver models. For devices providing
* a ::RECEIVER_INFO structure the number of provided COM ports
* is available in ::RECEIVER_INFO::n_com_ports.
*/
#define DEFAULT_N_COM 2
/**
* @brief A The structure used to store the configuration of two serial ports
*
* @deprecated This structure is deprecated, ::PORT_SETTINGS and related structures
* should be used instead, if supported by the device.
*/
typedef struct
{
COM_PARM com[DEFAULT_N_COM]; ///< COM0 and COM1 settings
uint8_t mode[DEFAULT_N_COM]; ///< COM0 and COM1 output mode
} PORT_PARM;
/**
* @brief The type of a GPS command code
*
* @see ::GPS_CMD_CODES
*/
typedef uint16_t GPS_CMD;
/**
* @brief Control codes to be or'ed with a particular command/type code
*/
enum GPS_CMD_CTRL_CODES
{
GPS_REQACK = 0x8000, ///< to device: request acknowledge
GPS_ACK = 0x4000, ///< from device: acknowledge a command
GPS_NACK = 0x2000, ///< from device: error evaluating a command
};
#define GPS_CTRL_MSK 0xF000 ///< bit mask of all ::GPS_CMD_CTRL_CODES
/**
* @brief Command codes for the binary protocol
*
* These codes specify commands and associated data types used by Meinberg's
* binary protocol to exchange data with a device via serial port, direct USB,
* or socket I/O.
*
* Some commands and associated data structures can be read (r) from a device, others
* can be written (w) to the device, and some can also be sent automatically (a) by
* a device after a ::GPS_AUTO_ON command has been sent to the device.
* The individual command codes are marked with (rwa) accordingly, where '-' is used
* to indicate that a particular mode is not supported.
*
* @note Not all command code are supported by all devices.
* See the hints for a particular command.
*
* @note If ::GPS_ALM, ::GPS_EPH or a code named ..._IDX is sent to retrieve
* some data from a device then an uint16_t parameter must be also supplied
* in order to specify the index number of the data set to be returned.
* The valid index range depends on the command code.
* For ::GPS_ALM and ::GPS_EPH the index is the SV number which may be 0 or
* ::MIN_SVNO_GPS to ::MAX_SVNO_GPS. If the number is 0 then all ::N_SVNO_GPS
* almanacs or ephemeris data structures are returned.
*
* @see ::GPS_CMD_CODES_TABLE
*/
enum GPS_CMD_CODES
{ /* system data */
GPS_AUTO_ON = 0x000, ///< (-w-) no data, enable auto-msgs from device
GPS_AUTO_OFF, ///< (-w-) no data, disable auto-msgs from device
GPS_SW_REV, ///< (r--) deprecated, ::SW_REV, software revision, use only if ::GPS_RECEIVER_INFO not supp.
GPS_BVAR_STAT, ///< (r--) ::BVAR_STAT, status of buffered variables, only if ::GPS_MODEL_HAS_BVAR_STAT
GPS_TIME, ///< (-wa) ::TTM, current time or capture, or init board time
GPS_POS_XYZ, ///< (rw-) ::XYZ, current position in ECEF coordinates, only if ::GPS_MODEL_HAS_POS_XYZ
GPS_POS_LLA, ///< (rw-) ::LLA, current position in geographic coordinates, only if ::GPS_MODEL_HAS_POS_LLA
GPS_TZDL, ///< (rw-) ::TZDL, time zone / daylight saving, only if ::GPS_MODEL_HAS_TZDL
GPS_PORT_PARM, ///< (rw-) deprecated, ::PORT_PARM, use ::PORT_SETTINGS etc. if ::GPS_RECEIVER_INFO supported
GPS_SYNTH, ///< (rw-) ::SYNTH, synthesizer settings, only if ::GPS_HAS_SYNTH
GPS_ANT_INFO, ///< (r-a) ::ANT_INFO, time diff after antenna disconnect, only if ::GPS_MODEL_HAS_ANT_INFO
GPS_UCAP, ///< (r-a) ::TTM, user capture events, only if ::RECEIVER_INFO::n_ucaps > 0
/* GPS data */
GPS_CFGH = 0x100, ///< (rw-) ::CFGH, SVs' configuration and health codes
GPS_ALM, ///< (rw-) req: uint16_t SV num, ::SV_ALM, one SV's almanac
GPS_EPH, ///< (rw-) req: uint16_t SV num, ::SV_EPH, one SV's ephemeris
GPS_UTC, ///< (rw-) ::UTC, GPS %UTC correction parameters
GPS_IONO, ///< (rw-) ::IONO, GPS ionospheric correction parameters
GPS_ASCII_MSG ///< (r--) ::ASCII_MSG, the GPS ASCII message
};
#ifndef _CSUM_DEFINED
typedef uint16_t CSUM; /* checksum used by some structures stored in non-volatile memory */
#define _CSUM_DEFINED
#endif
/**
* @brief The header of a binary message.
*/
typedef struct
{
GPS_CMD cmd; ///< see ::GPS_CMD_CODES
uint16_t len; ///< length of the data portion appended after the header
CSUM data_csum; ///< checksum of the data portion appended after the header
CSUM hdr_csum; ///< checksum of the preceding header bytes
} GPS_MSG_HDR;
#define GPS_ID_STR_LEN 16
#define GPS_ID_STR_SIZE ( GPS_ID_STR_LEN + 1 )
/**
* @brief Software revision information
*
* Contains a software revision code, plus an optional
* identifier for a customized version.
*/
typedef struct
{
uint16_t code; ///< Version number, e.g. 0x0120 means v1.20
char name[GPS_ID_STR_SIZE]; ///< Optional string identifying a customized version
uint8_t reserved; ///< Reserved field to yield even structure size
} SW_REV;
/**
* @brief GNSS satellite numbers
*
* @todo: Check if MAX_SVNO_GLN is 94 instead of 95, and thus
* N_SVNO_GLN is 30 instead of 31, as reported by Wikipedia.
*/
enum GNSS_SVNOS
{
MIN_SVNO_GPS = 1, ///< min. GPS satellite PRN number
MAX_SVNO_GPS = 32, ///< max. GPS satellite PRN number
N_SVNO_GPS = 32, ///< max. number of active GPS satellites
MIN_SVNO_WAAS = 33, ///< min. WAAS satellite number
MAX_SVNO_WAAS = 64, ///< max. WAAS satellite number
N_SVNO_WAAS = 32, ///< max. number of active WAAS satellites
MIN_SVNO_GLONASS = 65, ///< min. Glonass satellite number (64 + sat slot ID)
MAX_SVNO_GLONASS = 95, ///< max. Glonass satellite number (64 + sat slot ID)
N_SVNO_GLONASS = 31 ///< max. number of active Glonass satellites
};
typedef uint16_t SVNO; ///< the number of an SV (Space Vehicle, i.e. satellite)
typedef uint16_t HEALTH; ///< an SV's 6 bit health code
typedef uint16_t CFG; ///< an SV's 4 bit configuration code
typedef uint16_t IOD; ///< Issue-Of-Data code
/**
* @brief Status flags of battery buffered data
*
* Related to data received from the satellites, or data derived thereof.
*
* All '0' means OK, single bits set to '1' indicate
* the associated type of GPS data is not available.
*
* @see ::BVAR_FLAGS
*/
typedef uint16_t BVAR_STAT;
#define _mbg_swab_bvar_stat( _p ) _mbg_swab16( (_p) )
/**
* @brief Enumeration of flag bits used to define ::BVAR_FLAGS
*
* For each bit which is set this means the associated data set in
* non-volatile memory is not available, or incomplete.
* Most data sets will just be re-collected from the data streams sent
* by the satellites. However, the receiver position has usually been
* computed earlier during normal operation, and will be re-computed
* when a sufficient number of satellites can be received.
*
* @see ::BVAR_STAT
* @see ::BVAR_FLAGS
* @see ::BVAR_FLAG_NAMES
*/
enum BVAR_FLAG_BITS
{
BVAR_BIT_CFGH_INVALID, ///< Satellite configuration and health parameters incomplete
BVAR_BIT_ALM_NOT_COMPLETE, ///< Almanac parameters incomplete
BVAR_BIT_UTC_INVALID, ///< %UTC offset parameters incomplete
BVAR_BIT_IONO_INVALID, ///< Ionospheric correction parameters incomplete
BVAR_BIT_RCVR_POS_INVALID, ///< No valid receiver position available
N_BVAR_BIT ///< number of defined ::BVAR_STAT bits
};
/**
* @brief Bit masks associated with ::BVAR_FLAG_BITS
*
* Used with ::BVAR_STAT.
*
* @see ::BVAR_STAT
* @see ::BVAR_FLAG_BITS
* @see ::BVAR_FLAG_NAMES
*/
enum BVAR_FLAGS
{
BVAR_CFGH_INVALID = ( 1UL << BVAR_BIT_CFGH_INVALID ), ///< see ::BVAR_BIT_CFGH_INVALID
BVAR_ALM_NOT_COMPLETE = ( 1UL << BVAR_BIT_ALM_NOT_COMPLETE ), ///< see ::BVAR_BIT_ALM_NOT_COMPLETE
BVAR_UTC_INVALID = ( 1UL << BVAR_BIT_UTC_INVALID ), ///< see ::BVAR_BIT_UTC_INVALID
BVAR_IONO_INVALID = ( 1UL << BVAR_BIT_IONO_INVALID ), ///< see ::BVAR_BIT_IONO_INVALID
BVAR_RCVR_POS_INVALID = ( 1UL << BVAR_BIT_RCVR_POS_INVALID ), ///< see ::BVAR_BIT_RCVR_POS_INVALID
};
/**
* @brief A structure used to hold time in GPS format
*
* Date and time refer to the linear time scale defined by GPS, with
* the epoch starting at %UTC midnight at the beginning of January 6, 1980.
*
* GPS time is counted by the week numbers since the epoch, plus second
* of the week, plus fraction of the second. The week number transmitted
* by the satellites rolls over from 1023 to 0, but Meinberg devices
* just continue to count the weeks beyond the 1024 week limit to keep
* the receiver's internal time.
*
* %UTC time differs from GPS time since a number of leap seconds have
* been inserted in the %UTC time scale after the GPS epoche. The number
* of leap seconds is disseminated by the satellites using the ::UTC
* parameter set, which also provides info on pending leap seconds.
*/
typedef struct
{
uint16_t wn; ///< the week number since GPS has been installed
uint32_t sec; ///< the second of that week
uint32_t tick; ///< fractions of a second, 1/::RECEIVER_INFO::ticks_per_sec units
} T_GPS;
/**
* @brief Local date and time computed from GPS time
*
* The current number of leap seconds have to be added to get %UTC
* from GPS time. Additional corrections could have been made according
* to the time zone/daylight saving parameters ::TZDL defined by the user.
* The status field can be checked to see which corrections
* have actually been applied.
*
* @note Conversion from GPS time to %UTC and/or local time can only be
* done if some valid ::UTC correction parameters are available in the
* receiver's non-volatile memory.
*/
typedef struct
{
int16_t year; ///< year number, 0..9999
int8_t month; ///< month, 1..12
int8_t mday; ///< day of month, 1..31
int16_t yday; ///< day of year, 1..365, or 366 in case of leap year
int8_t wday; ///< day of week, 0..6 == Sun..Sat
int8_t hour; ///< hours, 0..23
int8_t min; ///< minutes, 0..59
int8_t sec; ///< seconds, 0..59, or 60 in case of inserted leap second
int32_t frac; ///< fractions of a second, 1/::RECEIVER_INFO::ticks_per_sec units
int32_t offs_from_utc; ///< local time offset from %UTC [sec]
uint16_t status; ///< status flags, see ::TM_GPS_STATUS_BIT_MASKS
} TM_GPS;
/**
* @brief Status flag bits used to define ::TM_GPS_STATUS_BIT_MASKS
*
* These bits report info on the time conversion from GPS time to %UTC
* and/or local time as well as device status info.
*
* @see ::TM_GPS_STATUS_BIT_MASKS
*/
enum TM_GPS_STATUS_BITS
{
TM_BIT_UTC, ///< %UTC correction has been made
TM_BIT_LOCAL, ///< %UTC has been converted to local time according to ::TZDL settings
TM_BIT_DL_ANN, ///< state of daylight saving is going to change
TM_BIT_DL_ENB, ///< daylight saving is in effect
TM_BIT_LS_ANN, ///< leap second pending
TM_BIT_LS_ENB, ///< current second is leap second
TM_BIT_LS_ANN_NEG, ///< set in addition to ::TM_BIT_LS_ANN if leap sec is negative
TM_BIT_INVT, ///< invalid time, e.g. if RTC battery bas been empty
TM_BIT_EXT_SYNC, ///< synchronized externally
TM_BIT_HOLDOVER, ///< in holdover mode after previous synchronization
TM_BIT_ANT_SHORT, ///< antenna cable short circuited
TM_BIT_NO_WARM, ///< OCXO has not warmed up
TM_BIT_ANT_DISCONN, ///< antenna currently disconnected
TM_BIT_SYN_FLAG, ///< TIME_SYN output is low
TM_BIT_NO_SYNC, ///< time sync actually not verified
TM_BIT_NO_POS ///< position actually not verified, LOCK LED off
};
/**
* @brief Status flag masks used with ::TM_GPS::status
*
* These bits report info on the time conversion from GPS time to %UTC
* and/or local time as well as device status info.
*
* @see ::TM_GPS_STATUS_BITS
*/
enum TM_GPS_STATUS_BIT_MASKS
{
TM_UTC = ( 1UL << TM_BIT_UTC ), ///< see ::TM_BIT_UTC
TM_LOCAL = ( 1UL << TM_BIT_LOCAL ), ///< see ::TM_BIT_LOCAL
TM_DL_ANN = ( 1UL << TM_BIT_DL_ANN ), ///< see ::TM_BIT_DL_ANN
TM_DL_ENB = ( 1UL << TM_BIT_DL_ENB ), ///< see ::TM_BIT_DL_ENB
TM_LS_ANN = ( 1UL << TM_BIT_LS_ANN ), ///< see ::TM_BIT_LS_ANN
TM_LS_ENB = ( 1UL << TM_BIT_LS_ENB ), ///< see ::TM_BIT_LS_ENB
TM_LS_ANN_NEG = ( 1UL << TM_BIT_LS_ANN_NEG ), ///< see ::TM_BIT_LS_ANN_NEG
TM_INVT = ( 1UL << TM_BIT_INVT ), ///< see ::TM_BIT_INVT
TM_EXT_SYNC = ( 1UL << TM_BIT_EXT_SYNC ), ///< see ::TM_BIT_EXT_SYNC
TM_HOLDOVER = ( 1UL << TM_BIT_HOLDOVER ), ///< see ::TM_BIT_HOLDOVER
TM_ANT_SHORT = ( 1UL << TM_BIT_ANT_SHORT ), ///< see ::TM_BIT_ANT_SHORT
TM_NO_WARM = ( 1UL << TM_BIT_NO_WARM ), ///< see ::TM_BIT_NO_WARM
TM_ANT_DISCONN = ( 1UL << TM_BIT_ANT_DISCONN ), ///< see ::TM_BIT_ANT_DISCONN
TM_SYN_FLAG = ( 1UL << TM_BIT_SYN_FLAG ), ///< see ::TM_BIT_SYN_FLAG
TM_NO_SYNC = ( 1UL << TM_BIT_NO_SYNC ), ///< see ::TM_BIT_NO_SYNC
TM_NO_POS = ( 1UL << TM_BIT_NO_POS ) ///< see ::TM_BIT_NO_POS
};
/**
* @brief A structure used to transmit information on date and time
*
* This structure can be used to transfer the current time, in which
* case the channel field has to be set to -1, or an event capture time
* retrieved from the on-board FIFO, in which case the channel field
* contains the index of the time capture input, e.g. 0 or 1.
*/
typedef struct
{
int16_t channel; ///< -1: the current on-board time; >= 0 the capture channel number
T_GPS t; ///< time in GPS scale and format
TM_GPS tm; ///< time converted to %UTC and/or local time according to ::TZDL settings
} TTM;
/* Two types of variables used to store a position. Type XYZ is */
/* used with a position in earth centered, earth fixed (ECEF) */
/* coordinates whereas type LLA holds such a position converted */
/* to geographic coordinates as defined by WGS84 (World Geodetic */
/* System from 1984). */
/**
* @brief Sequence and number of components of a cartesian position
*/
enum XYZ_FIELDS { XP, YP, ZP, N_XYZ }; // x, y, z
/**
* @brief A position in cartesian coordinates
*
* Usually earth centered, earth fixed (ECEF) coordinates,
* in [m].
*
* @note In the original code this is an array of double.
*
* @see ::XYZ_FIELDS
*/
typedef l_fp XYZ[N_XYZ];
/**
* @brief Sequence and number of components of a geographic position
*/
enum LLA_FIELDS { LAT, LON, ALT, N_LLA }; /* latitude, longitude, altitude */
/**
* @brief A geographic position based on latitude, longitude, and altitude
*
* The geographic position associated to specific cartesian coordinates
* depends on the characteristics of the ellipsoid used for the computation,
* the so-called geographic datum. GPS uses the WGS84 (World Geodetic System
* from 1984) ellipsoid by default.
*
* lon, lat in [rad], alt in [m]
*
* @note In the original code this is an array of double.
*
* @see ::LLA_FIELDS
*/
typedef l_fp LLA[N_LLA];
/**
* @defgroup group_synth Synthesizer parameters
*
* Synthesizer frequency is expressed as a
* four digit decimal number (freq) to be multiplied by 0.1 Hz and an
* base 10 exponent (range). If the effective frequency is less than
* 10 kHz its phase is synchronized corresponding to the variable phase.
* Phase may be in a range from -360 deg to +360 deg with a resolution
* of 0.1 deg, so the resulting numbers to be stored are in a range of
* -3600 to +3600.
*
* Example:<br>
* Assume the value of freq is 2345 (decimal) and the value of phase is 900.
* If range == 0 the effective frequency is 234.5 Hz with a phase of +90 deg.
* If range == 1 the synthesizer will generate a 2345 Hz output frequency
* and so on.
*
* Limitations:<br>
* If freq == 0 the synthesizer is disabled. If range == 0 the least
* significant digit of freq is limited to 0, 3, 5 or 6. The resulting
* frequency is shown in the examples below:
* - freq == 1230 --> 123.0 Hz
* - freq == 1233 --> 123 1/3 Hz (real 1/3 Hz, NOT 123.3 Hz)
* - freq == 1235 --> 123.5 Hz
* - freq == 1236 --> 123 2/3 Hz (real 2/3 Hz, NOT 123.6 Hz)
*
* If range == ::MAX_SYNTH_RANGE the value of freq must not exceed 1000, so
* the output frequency is limited to 10 MHz (see ::MAX_SYNTH_FREQ_VAL).
*
* @{ */
#define N_SYNTH_FREQ_DIGIT 4 ///< number of digits to edit
#define MAX_SYNTH_FREQ 1000 ///< if range == ::MAX_SYNTH_RANGE
#define MIN_SYNTH_RANGE 0
#define MAX_SYNTH_RANGE 5
#define N_SYNTH_RANGE ( MAX_SYNTH_RANGE - MIN_SYNTH_RANGE + 1 )
#define N_SYNTH_PHASE_DIGIT 4
#define MAX_SYNTH_PHASE 3600
#define MAX_SYNTH_FREQ_EDIT 9999 ///< max sequence of digits when editing
/**
* @brief The maximum frequency that can be configured for the synthesizer
*/
#define MAX_SYNTH_FREQ_VAL 10000000UL ///< 10 MHz
/* == MAX_SYNTH_FREQ * 10^(MAX_SYNTH_RANGE-1) */
/**
* @brief The synthesizer's phase is only be synchronized if the frequency is below this limit
*/
#define SYNTH_PHASE_SYNC_LIMIT 10000UL ///< 10 kHz
/**
* A Macro used to determine the position of the decimal point
* when printing the synthesizer frequency as 4 digit value
*/
#define _synth_dp_pos_from_range( _r ) \
( ( ( N_SYNTH_RANGE - (_r) ) % ( N_SYNTH_FREQ_DIGIT - 1 ) ) + 1 )
/**
* @brief Synthesizer frequency units
*
* An initializer for commonly displayed synthesizer frequency units
* (::N_SYNTH_RANGE strings)
*/
#define DEFAULT_FREQ_RANGES \
{ \
"Hz", \
"kHz", \
"kHz", \
"kHz", \
"MHz", \
"MHz", \
}
/**
* @brief Synthesizer configuration parameters
*/
typedef struct
{
int16_t freq; ///< four digits used; scale: 0.1 Hz; e.g. 1234 -> 123.4 Hz
int16_t range; ///< scale factor for freq; 0..::MAX_SYNTH_RANGE
int16_t phase; ///< -::MAX_SYNTH_PHASE..+::MAX_SYNTH_PHASE; >0 -> pulses later
} SYNTH;
#define _mbg_swab_synth( _p ) \
{ \
_mbg_swab16( &(_p)->freq ); \
_mbg_swab16( &(_p)->range ); \
_mbg_swab16( &(_p)->phase ); \
}
/**
* @brief Enumeration of synthesizer states
*/
enum SYNTH_STATES
{
SYNTH_DISABLED, ///< disbled by cfg, i.e. freq == 0.0
SYNTH_OFF, ///< not enabled after power-up
SYNTH_FREE, ///< enabled, but not synchronized
SYNTH_DRIFTING, ///< has initially been sync'd, but now running free
SYNTH_SYNC, ///< fully synchronized
N_SYNTH_STATE ///< the number of known states
};
/**
* @brief A structure used to report the synthesizer state
*/
typedef struct
{
uint8_t state; ///< state code as enumerated in ::SYNTH_STATES
uint8_t flags; ///< reserved, currently always 0
} SYNTH_STATE;
#define _mbg_swab_synth_state( _p ) _nop_macro_fnc()
#define SYNTH_FLAG_PHASE_IGNORED 0x01
/** @} defgroup group_synth */
/**
* @defgroup group_tzdl Time zone / daylight saving parameters
*
* Example: <br>
* For automatic daylight saving enable/disable in Central Europe,
* the variables are to be set as shown below: <br>
* - offs = 3600L one hour from %UTC
* - offs_dl = 3600L one additional hour if daylight saving enabled
* - tm_on = first Sunday from March 25, 02:00:00h ( year |= ::DL_AUTO_FLAG )
* - tm_off = first Sunday from October 25, 03:00:00h ( year |= ::DL_AUTO_FLAG )
* - name[0] == "CET " name if daylight saving not enabled
* - name[1] == "CEST " name if daylight saving is enabled
*
* @{ */
/**
* @brief The name of a time zone
*
* @note Up to 5 printable characters, plus trailing zero
*/
typedef char TZ_NAME[6];
/**
* @brief Time zone / daylight saving parameters
*
* This structure is used to specify how a device converts on-board %UTC
* to local time, including computation of beginning and end of daylight
* saving time (DST), if required.
*
* @note The ::TZDL structure contains members of type ::TM_GPS to specify
* the times for beginning and end of DST. However, the ::TM_GPS::frac,
* ::TM_GPS::offs_from_utc, and ::TM_GPS::status fields of these ::TZDL::tm_on
* and ::TZDL::tm_off members are ignored for the conversion to local time,
* and thus should be 0.
*/
typedef struct
{
int32_t offs; ///< standard offset from %UTC to local time [sec]
int32_t offs_dl; ///< additional offset if daylight saving enabled [sec]
TM_GPS tm_on; ///< date/time when daylight saving starts
TM_GPS tm_off; ///< date/time when daylight saving ends
TZ_NAME name[2]; ///< names without and with daylight saving enabled
} TZDL;
/**
* @brief A flag indicating automatic computation of DST
*
* If this flag is or'ed to the year numbers in ::TZDL::tm_on and ::TZDL::tm_off
* then daylight saving is computed automatically year by year.
*/
#define DL_AUTO_FLAG 0x8000
/** @} defgroup group_tzdl */
/**
* @brief Antenna status and error at reconnect information
*
* The structure below reflects the status of the antenna,
* the times of last disconnect/reconnect, and the board's
* clock offset when it has synchronized again after the
* disconnection interval.
*
* @note ::ANT_INFO::status changes back to ::ANT_RECONN only
* after the antenna has been reconnected <b>and</b> the
* receiver has re-synchronized to the satellite signal.
* In this case ::ANT_INFO::delta_t reports the time offset
* before resynchronization, i.e. how much the internal
* time has drifted while the antenna was disconnected.
*/
typedef struct
{
int16_t status; ///< current status of antenna, see ::ANT_STATUS_CODES
TM_GPS tm_disconn; ///< time of antenna disconnect
TM_GPS tm_reconn; ///< time of antenna reconnect
int32_t delta_t; ///< clock offs at reconn. time in 1/::RECEIVER_INFO::ticks_per_sec units
} ANT_INFO;
/**
* @brief Status code used with ::ANT_INFO::status
*/
enum ANT_STATUS_CODES
{
ANT_INVALID, ///< No other fields valid since antenna has not yet been disconnected
ANT_DISCONN, ///< Antenna is disconnected, tm_reconn and delta_t not yet set
ANT_RECONN, ///< Antenna has been disconnect, and receiver sync. after reconnect, so all fields valid
N_ANT_STATUS_CODES ///< the number of known status codes
};
/**
* @brief Summary of configuration and health data of all satellites
*/
typedef struct
{
CSUM csum; ///< checksum of the remaining bytes
int16_t valid; ///< flag data are valid
T_GPS tot_51; ///< time of transmission, page 51
T_GPS tot_63; ///< time of transmission, page 63
T_GPS t0a; ///< complete reference time almanac
CFG cfg[N_SVNO_GPS]; ///< 4 bit SV configuration code from page 63
HEALTH health[N_SVNO_GPS]; ///< 6 bit SV health codes from pages 51, 63
} CFGH;
/**
* @brief GPS %UTC correction parameters
*
* %UTC correction parameters basically as sent by the GPS satellites.
*
* The csum field is only used by the card's firmware to check the
* consistency of the structure in non-volatile memory.
*
* The field labeled valid indicates if the parameter set is valid, i.e.
* if it contains data received from the satellites.
*
* t0t, A0 and A1 contain fractional correction parameters for the current
* GPS-%UTC time offset in addition to the whole seconds. This is evaluated
* by the receivers' firmware to convert GPS time to %UTC time.
*
* The delta_tls field contains the current full seconds offset between
* GPS time and %UTC, which corresponds to the number of leap seconds inserted
* into the %UTC time scale since GPS was put into operation in January 1980.
*
* delta_tlfs holds the number of "future" leap seconds, i.e. the %UTC offset
* after the next leap second event defined by WNlsf and DNt.
*
* The fields WNlsf and DNt specify the GPS week number and the day number
* in that week for the end of which a leap second has been scheduled.
*
* @note: The satellites transmit WNlsf only as a signed 8 bit value, so it
* can only define a point in time which is +/- 127 weeks off the current time.
* The firmware tries to expand this based on the current week number, but
* the result is ambiguous if the leap second occurs or occurred more
* than 127 weeks in the future or past.
*
* So the leap second date should <b>only</b> be evaluated and displayed
* in a user interface if the fields delta_tls and delta_tlsf have
* different values, in which case there is indeed a leap second announcement
* inside the +/- 127 week range.
*
* @note In the original code the type of A0 and A1 is double.
*/
typedef struct
{
CSUM csum; ///< Checksum of the remaining bytes
int16_t valid; ///< Flag indicating %UTC parameters are valid
T_GPS t0t; ///< Reference Time %UTC Parameters [wn|sec]
l_fp A0; ///< +- Clock Correction Coefficient 0 [sec]
l_fp A1; ///< +- Clock Correction Coefficient 1 [sec/sec]
uint16_t WNlsf; ///< Week number of nearest leap second
int16_t DNt; ///< The day number at the end of which a leap second occurs
int8_t delta_tls; ///< Current %UTC offset to GPS system time [sec]
int8_t delta_tlsf; ///< Future %UTC offset to GPS system time after next leap second transition [sec]
} UTC;
/**
* @brief GPS ASCII message
*/
typedef struct
{
CSUM csum; ///< checksum of the remaining bytes */
int16_t valid; ///< flag data are valid
char s[23]; ///< 22 chars GPS ASCII message plus trailing zero
} ASCII_MSG;
/**
* @brief Ephemeris parameters of one specific satellite
*
* Needed to compute the position of a satellite at a given time with
* high precision. Valid for an interval of 4 to 6 hours from start
* of transmission.
*/
typedef struct
{
CSUM csum; ///< checksum of the remaining bytes
int16_t valid; ///< flag data are valid
HEALTH health; ///< health indication of transmitting SV [---]
IOD IODC; ///< Issue Of Data, Clock
IOD IODE2; ///< Issue of Data, Ephemeris (Subframe 2)
IOD IODE3; ///< Issue of Data, Ephemeris (Subframe 3)
T_GPS tt; ///< time of transmission
T_GPS t0c; ///< Reference Time Clock [---]
T_GPS t0e; ///< Reference Time Ephemeris [---]
l_fp sqrt_A; ///< Square Root of semi-major Axis [sqrt(m)]
l_fp e; ///< Eccentricity [---]
l_fp M0; ///< +- Mean Anomaly at Ref. Time [rad]
l_fp omega; ///< +- Argument of Perigee [rad]
l_fp OMEGA0; ///< +- Longit. of Asc. Node of orbit plane [rad]
l_fp OMEGADOT; ///< +- Rate of Right Ascension [rad/sec]
l_fp deltan; ///< +- Mean Motion Diff. from computed value [rad/sec]
l_fp i0; ///< +- Inclination Angle [rad]
l_fp idot; ///< +- Rate of Inclination Angle [rad/sec]
l_fp crc; ///< +- Cosine Corr. Term to Orbit Radius [m]
l_fp crs; ///< +- Sine Corr. Term to Orbit Radius [m]
l_fp cuc; ///< +- Cosine Corr. Term to Arg. of Latitude [rad]
l_fp cus; ///< +- Sine Corr. Term to Arg. of Latitude [rad]
l_fp cic; ///< +- Cosine Corr. Term to Inclination Angle [rad]
l_fp cis; ///< +- Sine Corr. Term to Inclination Angle [rad]
l_fp af0; ///< +- Clock Correction Coefficient 0 [sec]
l_fp af1; ///< +- Clock Correction Coefficient 1 [sec/sec]
l_fp af2; ///< +- Clock Correction Coefficient 2 [sec/sec^2]
l_fp tgd; ///< +- estimated group delay differential [sec]
uint16_t URA; ///< predicted User Range Accuracy
uint8_t L2code; ///< code on L2 channel [---]
uint8_t L2flag; ///< L2 P data flag [---]
} EPH;
/**
* @brief Almanac parameters of one specific satellite
*
* A reduced precision set of parameters used to check if a satellite
* is in view at a given time. Valid for an interval of more than 7 days
* from start of transmission.
*/
typedef struct
{
CSUM csum; ///< checksum of the remaining bytes
int16_t valid; ///< flag data are valid
HEALTH health; ///< [---]
T_GPS t0a; ///< Reference Time Almanac [sec]
l_fp sqrt_A; ///< Square Root of semi-major Axis [sqrt(m)]
l_fp e; ///< Eccentricity [---]
l_fp M0; ///< +- Mean Anomaly at Ref. Time [rad]
l_fp omega; ///< +- Argument of Perigee [rad]
l_fp OMEGA0; ///< +- Longit. of Asc. Node of orbit plane [rad]
l_fp OMEGADOT; ///< +- Rate of Right Ascension [rad/sec]
l_fp deltai; ///< +- [rad]
l_fp af0; ///< +- Clock Correction Coefficient 0 [sec]
l_fp af1; ///< +- Clock Correction Coefficient 1 [sec/sec]
} ALM;
/**
* @brief Ionospheric correction parameters
*/
typedef struct
{
CSUM csum; ///< checksum of the remaining bytes
int16_t valid; ///< flag data are valid
l_fp alpha_0; ///< Ionosph. Corr. Coeff. Alpha 0 [sec]
l_fp alpha_1; ///< Ionosph. Corr. Coeff. Alpha 1 [sec/deg]
l_fp alpha_2; ///< Ionosph. Corr. Coeff. Alpha 2 [sec/deg^2]
l_fp alpha_3; ///< Ionosph. Corr. Coeff. Alpha 3 [sec/deg^3]
l_fp beta_0; ///< Ionosph. Corr. Coeff. Beta 0 [sec]
l_fp beta_1; ///< Ionosph. Corr. Coeff. Beta 1 [sec/deg]
l_fp beta_2; ///< Ionosph. Corr. Coeff. Beta 2 [sec/deg^2]
l_fp beta_3; ///< Ionosph. Corr. Coeff. Beta 3 [sec/deg^3]
} IONO;
void mbg_tm_str (char **, TM_GPS *, int, int);
void mbg_tgps_str (char **, T_GPS *, int);
void get_mbg_header (unsigned char **, GPS_MSG_HDR *);
void put_mbg_header (unsigned char **, GPS_MSG_HDR *);
void get_mbg_sw_rev (unsigned char **, SW_REV *);
void get_mbg_ascii_msg (unsigned char **, ASCII_MSG *);
void get_mbg_svno (unsigned char **, SVNO *);
void get_mbg_health (unsigned char **, HEALTH *);
void get_mbg_cfg (unsigned char **, CFG *);
void get_mbg_tgps (unsigned char **, T_GPS *);
void get_mbg_tm (unsigned char **, TM_GPS *);
void get_mbg_ttm (unsigned char **, TTM *);
void get_mbg_synth (unsigned char **, SYNTH *);
void get_mbg_tzdl (unsigned char **, TZDL *);
void get_mbg_antinfo (unsigned char **, ANT_INFO *);
void get_mbg_cfgh (unsigned char **, CFGH *);
void get_mbg_utc (unsigned char **, UTC *);
void get_mbg_lla (unsigned char **, LLA);
void get_mbg_xyz (unsigned char **, XYZ);
void get_mbg_portparam (unsigned char **, PORT_PARM *);
void get_mbg_eph (unsigned char **, EPH *);
void get_mbg_alm (unsigned char **, ALM *);
void get_mbg_iono (unsigned char **, IONO *);
CSUM mbg_csum (unsigned char *, unsigned int);
#endif
/*
* History:
*
* mbg_gps166.h,v
* Revision 4.7 2006/06/22 18:41:43 kardel
* clean up signedness (gcc 4)
*
* Revision 4.6 2005/10/07 22:11:56 kardel
* bounded buffer implementation
*
* Revision 4.5.2.1 2005/09/25 10:23:48 kardel
* support bounded buffers
*
* Revision 4.5 2005/06/25 10:58:45 kardel
* add missing log keywords
*
* Revision 4.1 1998/06/12 15:07:30 kardel
* fixed prototyping
*
* Revision 4.0 1998/04/10 19:50:42 kardel
* Start 4.0 release version numbering
*
* Revision 1.1 1998/04/10 19:27:34 kardel
* initial NTP VERSION 4 integration of PARSE with GPS166 binary support
*
* Revision 1.1 1997/10/06 20:55:38 kardel
* new parse structure
*
*/