/*-
* Copyright (c) 2015,2016 Annapurna Labs Ltd. and affiliates
* All rights reserved.
*
* Developed by Semihalf.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/**
* Ethernet
* @{
* @file al_init_eth_lm.h
*
* @brief ethernet link management common utilities
*
* Common operation example:
* @code
* int main()
* {
* struct al_eth_lm_context lm_context;
* struct al_eth_lm_init_params lm_params;
* enum al_eth_lm_link_mode old_mode;
* enum al_eth_lm_link_mode new_mode;
* al_bool fault;
* al_bool link_up;
* int rc = 0;
*
* lm_params.adapter = hal_adapter;
* lm_params.serdes_obj = serdes;
* lm_params.grp = grp;
* lm_params.lane = lane;
* lm_params.sfp_detection = true;
* lm_params.link_training = true;
* lm_params.rx_equal = true
* lm_params.static_values = true;
* lm_params.kr_fec_enable = false;
* lm_params.eeprom_read = &my_eeprom_read;
* lm_params.eeprom_context = context;
* lm_params.get_random_byte = &my_rand_byte;
* lm_params.default_mode = AL_ETH_LM_MODE_10G_DA;
*
* al_eth_lm_init(&lm_context, &lm_params);
*
* rc = al_eth_lm_link_detection(&lm_context, &fault, &old_mode, &new_mode);
* if (fault == false)
* return; // in this case the link is still up
*
* if (rc) {
* printf("link detection failed on error\n");
* return;
* }
*
* if (old_mode != new_mode) {
* // perform serdes configuration if needed
*
* // mac stop / start / config if needed
* }
*
* spin_lock(lock);
* rc = al_eth_lm_link_establish($lm_context, &link_up);
* spin_unlock(lock);
* if (rc) {
* printf("establish link failed\n");
* return;
* }
*
* if (link_up)
* printf("Link established successfully\n");
* else
* printf("No signal found. probably the link partner is disconnected\n");
* }
* @endcode
*
*/
#ifndef __AL_INIT_ETH_LM_H__
#define __AL_INIT_ETH_LM_H__
#include <al_serdes.h>
#include <al_hal_eth.h>
#include "al_init_eth_kr.h"
enum al_eth_lm_link_mode {
AL_ETH_LM_MODE_DISCONNECTED,
AL_ETH_LM_MODE_10G_OPTIC,
AL_ETH_LM_MODE_10G_DA,
AL_ETH_LM_MODE_1G,
AL_ETH_LM_MODE_25G,
};
enum al_eth_lm_max_speed {
AL_ETH_LM_MAX_SPEED_MAX,
AL_ETH_LM_MAX_SPEED_25G,
AL_ETH_LM_MAX_SPEED_10G,
AL_ETH_LM_MAX_SPEED_1G,
};
enum al_eth_lm_link_state {
AL_ETH_LM_LINK_DOWN,
AL_ETH_LM_LINK_DOWN_RF,
AL_ETH_LM_LINK_UP,
};
enum al_eth_lm_led_config_speed {
AL_ETH_LM_LED_CONFIG_1G,
AL_ETH_LM_LED_CONFIG_10G,
AL_ETH_LM_LED_CONFIG_25G,
};
struct al_eth_lm_led_config_data {
enum al_eth_lm_led_config_speed speed;
};
struct al_eth_lm_context {
struct al_hal_eth_adapter *adapter;
struct al_serdes_grp_obj *serdes_obj;
enum al_serdes_lane lane;
uint32_t link_training_failures;
boolean_t tx_param_dirty;
boolean_t serdes_tx_params_valid;
struct al_serdes_adv_tx_params tx_params_override;
boolean_t rx_param_dirty;
boolean_t serdes_rx_params_valid;
struct al_serdes_adv_rx_params rx_params_override;
struct al_eth_an_adv local_adv;
struct al_eth_an_adv partner_adv;
enum al_eth_lm_link_mode mode;
uint8_t da_len;
boolean_t debug;
/* configurations */
boolean_t sfp_detection;
uint8_t sfp_bus_id;
uint8_t sfp_i2c_addr;
enum al_eth_lm_link_mode default_mode;
uint8_t default_dac_len;
boolean_t link_training;
boolean_t rx_equal;
boolean_t static_values;
boolean_t retimer_exist;
enum al_eth_retimer_type retimer_type;
uint8_t retimer_bus_id;
uint8_t retimer_i2c_addr;
enum al_eth_retimer_channel retimer_channel;
/* services */
int (*i2c_read)(void *handle, uint8_t bus_id, uint8_t i2c_addr,
uint8_t reg_addr, uint8_t *val);
int (*i2c_write)(void *handle, uint8_t bus_id, uint8_t i2c_addr,
uint8_t reg_addr, uint8_t val);
void *i2c_context;
uint8_t (*get_random_byte)(void);
int (*gpio_get)(unsigned int gpio);
uint32_t gpio_present;
enum al_eth_retimer_channel retimer_tx_channel;
boolean_t retimer_configured;
enum al_eth_lm_max_speed max_speed;
boolean_t sfp_detect_force_mode;
enum al_eth_lm_link_state link_state;
boolean_t new_port;
boolean_t (*lm_pause)(void *handle);
void (*led_config)(void *handle, struct al_eth_lm_led_config_data *data);
};
struct al_eth_lm_init_params {
/* pointer to HAL context */
struct al_hal_eth_adapter *adapter;
/* pointer to serdes object */
struct al_serdes_grp_obj *serdes_obj;
/* serdes lane for this port */
enum al_serdes_lane lane;
/*
* set to true to perform sfp detection if the link is down.
* when set to true, eeprom_read below should NOT be NULL.
*/
boolean_t sfp_detection;
/* i2c bus id of the SFP for this port */
uint8_t sfp_bus_id;
/* i2c addr of the SFP for this port */
uint8_t sfp_i2c_addr;
/*
* default mode, and dac length will be used in case sfp_detection
* is not set or in case the detection failed.
*/
enum al_eth_lm_link_mode default_mode;
uint8_t default_dac_len;
/* the i2c bus id and addr of the retimer in case it exist */
uint8_t retimer_bus_id;
uint8_t retimer_i2c_addr;
/* retimer channel connected to this port */
enum al_eth_retimer_channel retimer_channel;
enum al_eth_retimer_channel retimer_tx_channel;
/* retimer type if exist */
enum al_eth_retimer_type retimer_type;
/*
* the following parameters control what mechanisms to run
* on link_establish with the following steps:
* - if retimer_exist is set, the retimer will be configured based on DA len.
* - if link_training is set and DA detected run link training. if succeed return 0
* - if rx_equal is set serdes equalization will be run to configure the rx parameters.
* - if static_values is set, tx and rx values will be set based on static values.
*/
boolean_t retimer_exist;
boolean_t link_training;
boolean_t rx_equal;
boolean_t static_values;
/* enable / disable fec capabilities in AN */
boolean_t kr_fec_enable;
/*
* pointer to function that's read 1 byte from eeprom
* in case no eeprom is connected should return -ETIMEDOUT
*/
int (*i2c_read)(void *handle, uint8_t bus_id, uint8_t i2c_addr,
uint8_t reg_addr, uint8_t *val);
int (*i2c_write)(void *handle, uint8_t bus_id, uint8_t i2c_addr,
uint8_t reg_addr, uint8_t val);
void *i2c_context;
/* pointer to function that return 1 rand byte */
uint8_t (*get_random_byte)(void);
/* pointer to function that gets GPIO value - if NULL gpio present won't be used */
int (*gpio_get)(unsigned int gpio);
/* gpio number connected to the SFP present pin */
uint32_t gpio_present;
enum al_eth_lm_max_speed max_speed;
/* in case force mode is true - the default mode will be set regardless to
* the SFP EEPROM content */
boolean_t sfp_detect_force_mode;
/* lm pause callback - in case it return true the LM will try to preserve
* the current link status and will not try to establish new link (and will not
* access to i2c bus) */
boolean_t (*lm_pause)(void *handle);
/* config ethernet LEDs according to data. can be NULL if no configuration needed */
void (*led_config)(void *handle, struct al_eth_lm_led_config_data *data);
};
/**
* initialize link management context and set configuration
*
* @param lm_context pointer to link management context
* @param params parameters passed from upper layer
*
* @return 0 in case of success. otherwise on failure.
*/
int al_eth_lm_init(struct al_eth_lm_context *lm_context,
struct al_eth_lm_init_params *params);
/**
* perform link status check. in case link is down perform sfp detection
*
* @param lm_context pointer to link management context
* @param link_fault indicate if the link is down
* @param old_mode the last working mode
* @param new_mode the new mode detected in this call
*
* @return 0 in case of success. otherwise on failure.
*/
int al_eth_lm_link_detection(struct al_eth_lm_context *lm_context,
boolean_t *link_fault, enum al_eth_lm_link_mode *old_mode,
enum al_eth_lm_link_mode *new_mode);
/**
* run LT, rx equalization and static values override according to configuration
* This function MUST be called inside a lock as it using common serdes registers
*
* @param lm_context pointer to link management context
* @param link_up set to true in case link is establish successfully
*
* @return < 0 in case link was failed to be established
*/
int al_eth_lm_link_establish(struct al_eth_lm_context *lm_context,
boolean_t *link_up);
/**
* override the default static parameters
*
* @param lm_context pointer to link management context
* @param tx_params pointer to new tx params
* @param rx_params pointer to new rx params
*
* @return 0 in case of success. otherwise on failure.
**/
int al_eth_lm_static_parameters_override(struct al_eth_lm_context *lm_context,
struct al_serdes_adv_tx_params *tx_params,
struct al_serdes_adv_rx_params *rx_params);
/**
* disable serdes parameters override
*
* @param lm_context pointer to link management context
* @param tx_params set to true to disable override of tx params
* @param rx_params set to true to disable override of rx params
*
* @return 0 in case of success. otherwise on failure.
**/
int al_eth_lm_static_parameters_override_disable(struct al_eth_lm_context *lm_context,
boolean_t tx_params, boolean_t rx_params);
/**
* get the static parameters that are being used
* if the parameters was override - return the override values
* else return the current values of the parameters
*
* @param lm_context pointer to link management context
* @param tx_params pointer to new tx params
* @param rx_params pointer to new rx params
*
* @return 0 in case of success. otherwise on failure.
*/
int al_eth_lm_static_parameters_get(struct al_eth_lm_context *lm_context,
struct al_serdes_adv_tx_params *tx_params,
struct al_serdes_adv_rx_params *rx_params);
/**
* convert link management mode to string
*
* @param val link management mode
*
* @return string of the mode
*/
const char *al_eth_lm_mode_convert_to_str(enum al_eth_lm_link_mode val);
/**
* print all debug messages
*
* @param lm_context pointer to link management context
* @param enable set to true to enable debug mode
*/
void al_eth_lm_debug_mode_set(struct al_eth_lm_context *lm_context,
boolean_t enable);
#endif