/*
* Copyright (C) 2012 Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
/ {
#address-cells = <1>;
#size-cells = <1>;
model = "Marvell Orion5x SoC";
compatible = "marvell,orion5x";
interrupt-parent = <&intc>;
aliases {
gpio0 = &gpio0;
};
soc {
#address-cells = <2>;
#size-cells = <1>;
controller = <&mbusc>;
devbus_bootcs: devbus-bootcs {
compatible = "marvell,orion-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x1046C 0x4>;
ranges = <0 MBUS_ID(0x01, 0x0f) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&core_clk 0>;
status = "disabled";
};
devbus_cs0: devbus-cs0 {
compatible = "marvell,orion-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x1045C 0x4>;
ranges = <0 MBUS_ID(0x01, 0x1e) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&core_clk 0>;
status = "disabled";
};
devbus_cs1: devbus-cs1 {
compatible = "marvell,orion-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10460 0x4>;
ranges = <0 MBUS_ID(0x01, 0x1d) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&core_clk 0>;
status = "disabled";
};
devbus_cs2: devbus-cs2 {
compatible = "marvell,orion-devbus";
reg = <MBUS_ID(0xf0, 0x01) 0x10464 0x4>;
ranges = <0 MBUS_ID(0x01, 0x1b) 0 0xffffffff>;
#address-cells = <1>;
#size-cells = <1>;
clocks = <&core_clk 0>;
status = "disabled";
};
internal-regs {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
gpio0: gpio@10100 {
compatible = "marvell,orion-gpio";
#gpio-cells = <2>;
gpio-controller;
reg = <0x10100 0x40>;
ngpios = <32>;
interrupt-controller;
#interrupt-cells = <2>;
interrupts = <6>, <7>, <8>, <9>;
};
spi: spi@10600 {
compatible = "marvell,orion-spi";
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
reg = <0x10600 0x28>;
status = "disabled";
};
i2c: i2c@11000 {
compatible = "marvell,mv64xxx-i2c";
reg = <0x11000 0x20>;
#address-cells = <1>;
#size-cells = <0>;
interrupts = <5>;
clocks = <&core_clk 0>;
status = "disabled";
};
uart0: serial@12000 {
compatible = "ns16550a";
reg = <0x12000 0x100>;
reg-shift = <2>;
interrupts = <3>;
clocks = <&core_clk 0>;
status = "disabled";
};
uart1: serial@12100 {
compatible = "ns16550a";
reg = <0x12100 0x100>;
reg-shift = <2>;
interrupts = <4>;
clocks = <&core_clk 0>;
status = "disabled";
};
bridge_intc: bridge-interrupt-ctrl@20110 {
compatible = "marvell,orion-bridge-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20110 0x8>;
interrupts = <0>;
marvell,#interrupts = <4>;
};
intc: interrupt-controller@20200 {
compatible = "marvell,orion-intc";
interrupt-controller;
#interrupt-cells = <1>;
reg = <0x20200 0x08>;
};
timer: timer@20300 {
compatible = "marvell,orion-timer";
reg = <0x20300 0x20>;
interrupt-parent = <&bridge_intc>;
interrupts = <1>, <2>;
clocks = <&core_clk 0>;
};
wdt: wdt@20300 {
compatible = "marvell,orion-wdt";
reg = <0x20300 0x28>, <0x20108 0x4>;
interrupt-parent = <&bridge_intc>;
interrupts = <3>;
clocks = <&core_clk 0>;
status = "okay";
};
ehci0: ehci@50000 {
compatible = "marvell,orion-ehci";
reg = <0x50000 0x1000>;
interrupts = <17>;
status = "disabled";
};
xor: dma-controller@60900 {
compatible = "marvell,orion-xor";
reg = <0x60900 0x100
0x60b00 0x100>;
status = "okay";
xor00 {
interrupts = <30>;
dmacap,memcpy;
dmacap,xor;
};
xor01 {
interrupts = <31>;
dmacap,memcpy;
dmacap,xor;
dmacap,memset;
};
};
eth: ethernet-controller@72000 {
compatible = "marvell,orion-eth";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72000 0x4000>;
marvell,tx-checksum-limit = <1600>;
status = "disabled";
ethport: ethernet-port@0 {
compatible = "marvell,orion-eth-port";
reg = <0>;
interrupts = <21>;
/* overwrite MAC address in bootloader */
local-mac-address = [00 00 00 00 00 00];
/* set phy-handle property in board file */
};
};
mdio: mdio-bus@72004 {
compatible = "marvell,orion-mdio";
#address-cells = <1>;
#size-cells = <0>;
reg = <0x72004 0x84>;
interrupts = <22>;
status = "disabled";
/* add phy nodes in board file */
};
sata: sata@80000 {
compatible = "marvell,orion-sata";
reg = <0x80000 0x5000>;
interrupts = <29>;
status = "disabled";
};
cesa: crypto@90000 {
compatible = "marvell,orion-crypto";
reg = <0x90000 0x10000>;
reg-names = "regs";
interrupts = <28>;
marvell,crypto-srams = <&crypto_sram>;
marvell,crypto-sram-size = <0x800>;
status = "okay";
};
ehci1: ehci@a0000 {
compatible = "marvell,orion-ehci";
reg = <0xa0000 0x1000>;
interrupts = <12>;
status = "disabled";
};
};
crypto_sram: sa-sram {
compatible = "mmio-sram";
reg = <MBUS_ID(0x09, 0x00) 0x0 0x800>;
#address-cells = <1>;
#size-cells = <1>;
};
};
};