// SPDX-License-Identifier:     GPL-2.0
/*
 * Copyright (C) 2019, Intel Corporation
 */
#include "socfpga_agilex.dtsi"

/ {
	model = "SoCFPGA Agilex SoCDK";

	aliases {
		serial0 = &uart0;
		ethernet0 = &gmac0;
		ethernet1 = &gmac1;
		ethernet2 = &gmac2;
	};

	chosen {
		stdout-path = "serial0:115200n8";
	};

	leds {
		compatible = "gpio-leds";
		hps0 {
			label = "hps_led0";
			gpios = <&portb 20 GPIO_ACTIVE_HIGH>;
		};

		hps1 {
			label = "hps_led1";
			gpios = <&portb 19 GPIO_ACTIVE_HIGH>;
		};

		hps2 {
			label = "hps_led2";
			gpios = <&portb 21 GPIO_ACTIVE_HIGH>;
		};
	};

	memory {
		device_type = "memory";
		/* We expect the bootloader to fill in the reg */
		reg = <0 0 0 0>;
	};

	soc {
		clocks {
			osc1 {
				clock-frequency = <25000000>;
			};
		};
	};
};

&gpio1 {
	status = "okay";
};

&gmac2 {
	status = "okay";
	phy-mode = "rgmii";
	phy-handle = <&phy0>;

	max-frame-size = <9000>;

	mdio0 {
		#address-cells = <1>;
		#size-cells = <0>;
		compatible = "snps,dwmac-mdio";
		phy0: ethernet-phy@0 {
			reg = <4>;

			txd0-skew-ps = <0>; /* -420ps */
			txd1-skew-ps = <0>; /* -420ps */
			txd2-skew-ps = <0>; /* -420ps */
			txd3-skew-ps = <0>; /* -420ps */
			rxd0-skew-ps = <420>; /* 0ps */
			rxd1-skew-ps = <420>; /* 0ps */
			rxd2-skew-ps = <420>; /* 0ps */
			rxd3-skew-ps = <420>; /* 0ps */
			txen-skew-ps = <0>; /* -420ps */
			txc-skew-ps = <900>; /* 0ps */
			rxdv-skew-ps = <420>; /* 0ps */
			rxc-skew-ps = <1680>; /* 780ps */
		};
	};
};

&nand {
	status = "okay";

	flash@0 {
		#address-cells = <1>;
		#size-cells = <1>;
		reg = <0>;
		nand-bus-width = <16>;

		partition@0 {
			label = "u-boot";
			reg = <0 0x200000>;
		};
		partition@200000 {
			label = "env";
			reg = <0x200000 0x40000>;
		};
		partition@240000 {
			label = "dtb";
			reg = <0x240000 0x40000>;
		};
		partition@280000 {
			label = "kernel";
			reg = <0x280000 0x2000000>;
		};
		partition@2280000 {
			label = "misc";
			reg = <0x2280000 0x2000000>;
		};
		partition@4280000 {
			label = "rootfs";
			reg = <0x4280000 0x3bd80000>;
		};
	};
};

&uart0 {
	status = "okay";
};

&usb0 {
	status = "okay";
	disable-over-current;
};

&watchdog0 {
	status = "okay";
};