/* Copyright (c) 2008-2012 Freescale Semiconductor, Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions are met:
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* * Neither the name of Freescale Semiconductor nor the
* names of its contributors may be used to endorse or promote products
* derived from this software without specific prior written permission.
*
*
* ALTERNATIVELY, this software may be distributed under the terms of the
* GNU General Public License ("GPL") as published by the Free Software
* Foundation, either version 2 of that License or (at your option) any
* later version.
*
* THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/**************************************************************************//**
@File fm_port_ext.h
@Description FM-Port Application Programming Interface.
*//***************************************************************************/
#ifndef __FM_PORT_EXT
#define __FM_PORT_EXT
#include "error_ext.h"
#include "std_ext.h"
#include "fm_pcd_ext.h"
#include "fm_ext.h"
#include "net_ext.h"
/**************************************************************************//**
@Group FM_grp Frame Manager API
@Description FM API functions, definitions and enums
@{
*//***************************************************************************/
/**************************************************************************//**
@Group FM_PORT_grp FM Port
@Description FM Port API
The FM uses a general module called "port" to represent a Tx port
(MAC), an Rx port (MAC) or Offline Parsing port.
The number of ports in an FM varies between SOCs.
The SW driver manages these ports as sub-modules of the FM, i.e.
after an FM is initialized, its ports may be initialized and
operated upon.
The port is initialized aware of its type, but other functions on
a port may be indifferent to its type. When necessary, the driver
verifies coherence and returns error if applicable.
On initialization, user specifies the port type and it's index
(relative to the port's type) - always starting at 0.
@{
*//***************************************************************************/
/**************************************************************************//**
@Description An enum for defining port PCD modes.
This enum defines the superset of PCD engines support - i.e. not
all engines have to be used, but all have to be enabled. The real
flow of a specific frame depends on the PCD configuration and the
frame headers and payload.
Note: the first engine and the first engine after the parser (if
exists) should be in order, the order is important as it will
define the flow of the port. However, as for the rest engines
(the ones that follows), the order is not important anymore as
it is defined by the PCD graph itself.
*//***************************************************************************/
typedef enum e_FmPortPcdSupport {
e_FM_PORT_PCD_SUPPORT_NONE = 0 /**< BMI to BMI, PCD is not used */
, e_FM_PORT_PCD_SUPPORT_PRS_ONLY /**< Use only Parser */
, e_FM_PORT_PCD_SUPPORT_PLCR_ONLY /**< Use only Policer */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR /**< Use Parser and Policer */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG /**< Use Parser and Keygen */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC /**< Use Parser, Keygen and Coarse Classification */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_CC_AND_PLCR
/**< Use all PCD engines */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_KG_AND_PLCR /**< Use Parser, Keygen and Policer */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_CC /**< Use Parser and Coarse Classification */
, e_FM_PORT_PCD_SUPPORT_PRS_AND_CC_AND_PLCR /**< Use Parser and Coarse Classification and Policer */
, e_FM_PORT_PCD_SUPPORT_CC_ONLY /**< Use only Coarse Classification */
#ifdef FM_CAPWAP_SUPPORT
, e_FM_PORT_PCD_SUPPORT_CC_AND_KG /**< Use Coarse Classification,and Keygen */
, e_FM_PORT_PCD_SUPPORT_CC_AND_KG_AND_PLCR /**< Use Coarse Classification, Keygen and Policer */
#endif /* FM_CAPWAP_SUPPORT */
} e_FmPortPcdSupport;
/**************************************************************************//**
@Description Port interrupts
*//***************************************************************************/
typedef enum e_FmPortExceptions {
e_FM_PORT_EXCEPTION_IM_BUSY /**< Independent-Mode Rx-BUSY */
} e_FmPortExceptions;
/**************************************************************************//**
@Collection General FM Port defines
*//***************************************************************************/
#define FM_PORT_PRS_RESULT_NUM_OF_WORDS 8 /**< Number of 4 bytes words in parser result */
/* @} */
/**************************************************************************//**
@Collection FM Frame error
*//***************************************************************************/
typedef uint32_t fmPortFrameErrSelect_t; /**< typedef for defining Frame Descriptor errors */
#define FM_PORT_FRM_ERR_UNSUPPORTED_FORMAT FM_FD_ERR_UNSUPPORTED_FORMAT /**< Not for Rx-Port! Unsupported Format */
#define FM_PORT_FRM_ERR_LENGTH FM_FD_ERR_LENGTH /**< Not for Rx-Port! Length Error */
#define FM_PORT_FRM_ERR_DMA FM_FD_ERR_DMA /**< DMA Data error */
#define FM_PORT_FRM_ERR_NON_FM FM_FD_RX_STATUS_ERR_NON_FM /**< non Frame-Manager error; probably come from SEC that
was chained to FM */
#define FM_PORT_FRM_ERR_IPRE (FM_FD_ERR_IPR & ~FM_FD_IPR) /**< IPR error */
#define FM_PORT_FRM_ERR_IPR_NCSP (FM_FD_ERR_IPR_NCSP & ~FM_FD_IPR) /**< IPR non-consistent-sp */
#define FM_PORT_FRM_ERR_IPFE 0 /**< Obsolete; will be removed in the future */
#ifdef FM_CAPWAP_SUPPORT
#define FM_PORT_FRM_ERR_CRE FM_FD_ERR_CRE
#define FM_PORT_FRM_ERR_CHE FM_FD_ERR_CHE
#endif /* FM_CAPWAP_SUPPORT */
#define FM_PORT_FRM_ERR_PHYSICAL FM_FD_ERR_PHYSICAL /**< Rx FIFO overflow, FCS error, code error, running disparity
error (SGMII and TBI modes), FIFO parity error. PHY
Sequence error, PHY error control character detected. */
#define FM_PORT_FRM_ERR_SIZE FM_FD_ERR_SIZE /**< Frame too long OR Frame size exceeds max_length_frame */
#define FM_PORT_FRM_ERR_CLS_DISCARD FM_FD_ERR_CLS_DISCARD /**< indicates a classifier "drop" operation */
#define FM_PORT_FRM_ERR_EXTRACTION FM_FD_ERR_EXTRACTION /**< Extract Out of Frame */
#define FM_PORT_FRM_ERR_NO_SCHEME FM_FD_ERR_NO_SCHEME /**< No Scheme Selected */
#define FM_PORT_FRM_ERR_KEYSIZE_OVERFLOW FM_FD_ERR_KEYSIZE_OVERFLOW /**< Keysize Overflow */
#define FM_PORT_FRM_ERR_COLOR_RED FM_FD_ERR_COLOR_RED /**< Frame color is red */
#define FM_PORT_FRM_ERR_COLOR_YELLOW FM_FD_ERR_COLOR_YELLOW /**< Frame color is yellow */
#define FM_PORT_FRM_ERR_ILL_PLCR FM_FD_ERR_ILL_PLCR /**< Illegal Policer Profile selected */
#define FM_PORT_FRM_ERR_PLCR_FRAME_LEN FM_FD_ERR_PLCR_FRAME_LEN /**< Policer frame length error */
#define FM_PORT_FRM_ERR_PRS_TIMEOUT FM_FD_ERR_PRS_TIMEOUT /**< Parser Time out Exceed */
#define FM_PORT_FRM_ERR_PRS_ILL_INSTRUCT FM_FD_ERR_PRS_ILL_INSTRUCT /**< Invalid Soft Parser instruction */
#define FM_PORT_FRM_ERR_PRS_HDR_ERR FM_FD_ERR_PRS_HDR_ERR /**< Header error was identified during parsing */
#define FM_PORT_FRM_ERR_BLOCK_LIMIT_EXCEEDED FM_FD_ERR_BLOCK_LIMIT_EXCEEDED /**< Frame parsed beyind 256 first bytes */
#define FM_PORT_FRM_ERR_PROCESS_TIMEOUT 0x00000001 /**< FPM Frame Processing Timeout Exceeded */
/* @} */
/**************************************************************************//**
@Group FM_PORT_init_grp FM Port Initialization Unit
@Description FM Port Initialization Unit
@{
*//***************************************************************************/
/**************************************************************************//**
@Description Exceptions user callback routine, will be called upon an
exception passing the exception identification.
@Param[in] h_App - User's application descriptor.
@Param[in] exception - The exception.
*//***************************************************************************/
typedef void (t_FmPortExceptionCallback) (t_Handle h_App, e_FmPortExceptions exception);
/**************************************************************************//**
@Description User callback function called by driver with received data.
User provides this function. Driver invokes it.
@Param[in] h_App Application's handle originally specified to
the API Config function
@Param[in] p_Data A pointer to data received
@Param[in] length length of received data
@Param[in] status receive status and errors
@Param[in] position position of buffer in frame
@Param[in] h_BufContext A handle of the user acossiated with this buffer
@Retval e_RX_STORE_RESPONSE_CONTINUE - order the driver to continue Rx
operation for all ready data.
@Retval e_RX_STORE_RESPONSE_PAUSE - order the driver to stop Rx operation.
*//***************************************************************************/
typedef e_RxStoreResponse (t_FmPortImRxStoreCallback) (t_Handle h_App,
uint8_t *p_Data,
uint16_t length,
uint16_t status,
uint8_t position,
t_Handle h_BufContext);
/**************************************************************************//**
@Description User callback function called by driver when transmit completed.
User provides this function. Driver invokes it.
@Param[in] h_App Application's handle originally specified to
the API Config function
@Param[in] p_Data A pointer to data received
@Param[in] status transmit status and errors
@Param[in] lastBuffer is last buffer in frame
@Param[in] h_BufContext A handle of the user acossiated with this buffer
*//***************************************************************************/
typedef void (t_FmPortImTxConfCallback) (t_Handle h_App,
uint8_t *p_Data,
uint16_t status,
t_Handle h_BufContext);
/**************************************************************************//**
@Description A structure for additional Rx port parameters
*//***************************************************************************/
typedef struct t_FmPortRxParams {
uint32_t errFqid; /**< Error Queue Id. */
uint32_t dfltFqid; /**< Default Queue Id. */
uint16_t liodnOffset; /**< Port's LIODN offset. */
t_FmExtPools extBufPools; /**< Which external buffer pools are used
(up to FM_PORT_MAX_NUM_OF_EXT_POOLS), and their sizes. */
} t_FmPortRxParams;
/**************************************************************************//**
@Description A structure for additional non-Rx port parameters
*//***************************************************************************/
typedef struct t_FmPortNonRxParams {
uint32_t errFqid; /**< Error Queue Id. */
uint32_t dfltFqid; /**< For Tx - Default Confirmation queue,
0 means no Tx confirmation for processed
frames. For OP port - default Rx queue. */
uint32_t qmChannel; /**< QM-channel dedicated to this port; will be used
by the FM for dequeue. */
} t_FmPortNonRxParams;
/**************************************************************************//**
@Description A structure for additional Rx port parameters
*//***************************************************************************/
typedef struct t_FmPortImRxTxParams {
t_Handle h_FmMuram; /**< A handle of the FM-MURAM partition */
uint16_t liodnOffset; /**< For Rx ports only. Port's LIODN Offset. */
uint8_t dataMemId; /**< Memory partition ID for data buffers */
uint32_t dataMemAttributes; /**< Memory attributes for data buffers */
t_BufferPoolInfo rxPoolParams; /**< For Rx ports only. */
t_FmPortImRxStoreCallback *f_RxStore; /**< For Rx ports only. */
t_FmPortImTxConfCallback *f_TxConf; /**< For Tx ports only. */
} t_FmPortImRxTxParams;
/**************************************************************************//**
@Description A union for additional parameters depending on port type
*//***************************************************************************/
typedef union u_FmPortSpecificParams {
t_FmPortImRxTxParams imRxTxParams; /**< Rx/Tx Independent-Mode port parameter structure */
t_FmPortRxParams rxParams; /**< Rx port parameters structure */
t_FmPortNonRxParams nonRxParams; /**< Non-Rx port parameters structure */
} u_FmPortSpecificParams;
/**************************************************************************//**
@Description A structure representing FM initialization parameters
*//***************************************************************************/
typedef struct t_FmPortParams {
uintptr_t baseAddr; /**< Virtual Address of memory mapped FM Port registers.*/
t_Handle h_Fm; /**< A handle to the FM object this port related to */
e_FmPortType portType; /**< Port type */
uint8_t portId; /**< Port Id - relative to type;
NOTE: When configuring Offline Parsing port for
FMANv3 devices (DPAA_VERSION 11 and higher),
it is highly recommended NOT to use portId=0 due to lack
of HW resources on portId=0. */
bool independentModeEnable;
/**< This port is Independent-Mode - Used for Rx/Tx ports only! */
uint16_t liodnBase; /**< Irrelevant for P4080 rev 1. LIODN base for this port, to be
used together with LIODN offset. */
u_FmPortSpecificParams specificParams; /**< Additional parameters depending on port
type. */
t_FmPortExceptionCallback *f_Exception; /**< Relevant for IM only Callback routine to be called on BUSY exception */
t_Handle h_App; /**< A handle to an application layer object; This handle will
be passed by the driver upon calling the above callbacks */
} t_FmPortParams;
/**************************************************************************//**
@Function FM_PORT_Config
@Description Creates a descriptor for the FM PORT module.
The routine returns a handle (descriptor) to the FM PORT object.
This descriptor must be passed as first parameter to all other
FM PORT function calls.
No actual initialization or configuration of FM hardware is
done by this routine.
@Param[in] p_FmPortParams - Pointer to data structure of parameters
@Retval Handle to FM object, or NULL for Failure.
*//***************************************************************************/
t_Handle FM_PORT_Config(t_FmPortParams *p_FmPortParams);
/**************************************************************************//**
@Function FM_PORT_Init
@Description Initializes the FM PORT module by defining the software structure
and configuring the hardware registers.
@Param[in] h_FmPort - FM PORT module descriptor
@Return E_OK on success; Error code otherwise.
*//***************************************************************************/
t_Error FM_PORT_Init(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_Free
@Description Frees all resources that were assigned to FM PORT module.
Calling this routine invalidates the descriptor.
@Param[in] h_FmPort - FM PORT module descriptor
@Return E_OK on success; Error code otherwise.
*//***************************************************************************/
t_Error FM_PORT_Free(t_Handle h_FmPort);
/**************************************************************************//**
@Group FM_PORT_advanced_init_grp FM Port Advanced Configuration Unit
@Description Configuration functions used to change default values.
@{
*//***************************************************************************/
/**************************************************************************//**
@Description enum for defining QM frame dequeue
*//***************************************************************************/
typedef enum e_FmPortDeqType {
e_FM_PORT_DEQ_TYPE1, /**< Dequeue from the SP channel - with priority precedence,
and Intra-Class Scheduling respected. */
e_FM_PORT_DEQ_TYPE2, /**< Dequeue from the SP channel - with active FQ precedence,
and Intra-Class Scheduling respected. */
e_FM_PORT_DEQ_TYPE3 /**< Dequeue from the SP channel - with active FQ precedence,
and override Intra-Class Scheduling */
} e_FmPortDeqType;
/**************************************************************************//**
@Description enum for defining QM frame dequeue
*//***************************************************************************/
typedef enum e_FmPortDeqPrefetchOption {
e_FM_PORT_DEQ_NO_PREFETCH, /**< QMI preforms a dequeue action for a single frame
only when a dedicated portID Tnum is waiting. */
e_FM_PORT_DEQ_PARTIAL_PREFETCH, /**< QMI preforms a dequeue action for 3 frames when
one dedicated portId tnum is waiting. */
e_FM_PORT_DEQ_FULL_PREFETCH /**< QMI preforms a dequeue action for 3 frames when
no dedicated portId tnums are waiting. */
} e_FmPortDeqPrefetchOption;
/**************************************************************************//**
@Description enum for defining port default color
*//***************************************************************************/
typedef enum e_FmPortColor {
e_FM_PORT_COLOR_GREEN, /**< Default port color is green */
e_FM_PORT_COLOR_YELLOW, /**< Default port color is yellow */
e_FM_PORT_COLOR_RED, /**< Default port color is red */
e_FM_PORT_COLOR_OVERRIDE /**< Ignore color */
} e_FmPortColor;
/**************************************************************************//**
@Description A structure for defining Dual Tx rate limiting scale
*//***************************************************************************/
typedef enum e_FmPortDualRateLimiterScaleDown {
e_FM_PORT_DUAL_RATE_LIMITER_NONE = 0, /**< Use only single rate limiter */
e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_2, /**< Divide high rate limiter by 2 */
e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_4, /**< Divide high rate limiter by 4 */
e_FM_PORT_DUAL_RATE_LIMITER_SCALE_DOWN_BY_8 /**< Divide high rate limiter by 8 */
} e_FmPortDualRateLimiterScaleDown;
/**************************************************************************//**
@Description A structure for defining FM port resources
*//***************************************************************************/
typedef struct t_FmPortRsrc {
uint32_t num; /**< Committed required resource */
uint32_t extra; /**< Extra (not committed) required resource */
} t_FmPortRsrc;
/**************************************************************************//**
@Description A structure for defining observed pool depletion
*//***************************************************************************/
typedef struct t_FmPortObservedBufPoolDepletion {
t_FmBufPoolDepletion poolDepletionParams;/**< parameters to define pool depletion */
t_FmExtPools poolsParams; /**< Which external buffer pools are observed
(up to FM_PORT_MAX_NUM_OF_OBSERVED_EXT_POOLS),
and their sizes. */
} t_FmPortObservedBufPoolDepletion;
/**************************************************************************//**
@Description A structure for defining Tx rate limiting
*//***************************************************************************/
typedef struct t_FmPortRateLimit {
uint16_t maxBurstSize; /**< in KBytes for Tx ports, in frames
for OP ports. (note that
for early chips burst size is
rounded up to a multiply of 1000 frames).*/
uint32_t rateLimit; /**< in Kb/sec for Tx ports, in frame/sec for
OP ports. Rate limit refers to
data rate (rather than line rate). */
e_FmPortDualRateLimiterScaleDown rateLimitDivider; /**< For OP ports only. Not-valid
for some earlier chip revisions */
} t_FmPortRateLimit;
/**************************************************************************//**
@Description A structure for defining the parameters of
the Rx port performance counters
*//***************************************************************************/
typedef struct t_FmPortPerformanceCnt {
uint8_t taskCompVal; /**< Task compare value */
uint8_t queueCompVal; /**< Rx queue/Tx confirm queue compare
value (unused for H/O) */
uint8_t dmaCompVal; /**< Dma compare value */
uint32_t fifoCompVal; /**< Fifo compare value (in bytes) */
} t_FmPortPerformanceCnt;
/**************************************************************************//**
@Description A structure for defining the sizes of the Deep Sleep
the Auto Response tables
*//***************************************************************************/
typedef struct t_FmPortDsarTablesSizes
{
uint16_t maxNumOfArpEntries;
uint16_t maxNumOfEchoIpv4Entries;
uint16_t maxNumOfNdpEntries;
uint16_t maxNumOfEchoIpv6Entries;
uint16_t maxNumOfSnmpIPV4Entries;
uint16_t maxNumOfSnmpIPV6Entries;
uint16_t maxNumOfSnmpOidEntries;
uint16_t maxNumOfSnmpOidChar; /* total amount of character needed for the snmp table */
uint16_t maxNumOfIpProtFiltering;
uint16_t maxNumOfTcpPortFiltering;
uint16_t maxNumOfUdpPortFiltering;
} t_FmPortDsarTablesSizes;
/**************************************************************************//**
@Function FM_PORT_ConfigDsarSupport
@Description This function will allocate the amount of MURAM needed for
this max number of entries for Deep Sleep Auto Response.
it will calculate all needed MURAM for autoresponse including
necesary common stuff.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] params A pointer to a structure containing the maximum
sizes of the auto response tables
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDsarSupport(t_Handle h_FmPortRx, t_FmPortDsarTablesSizes *params);
/**************************************************************************//**
@Function FM_PORT_ConfigNumOfOpenDmas
@Description Calling this routine changes the max number of open DMA's
available for this port. It changes this parameter in the
internal driver data base from its default configuration
[OP: 1]
[1G-RX, 1G-TX: 1 (+1)]
[10G-RX, 10G-TX: 8 (+8)]
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_OpenDmas A pointer to a structure of parameters defining
the open DMA allocation.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigNumOfOpenDmas(t_Handle h_FmPort, t_FmPortRsrc *p_OpenDmas);
/**************************************************************************//**
@Function FM_PORT_ConfigNumOfTasks
@Description Calling this routine changes the max number of tasks
available for this port. It changes this parameter in the
internal driver data base from its default configuration
[OP: 1]
[1G-RX, 1G-TX: 3 (+2)]
[10G-RX, 10G-TX: 16 (+8)]
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_NumOfTasks A pointer to a structure of parameters defining
the tasks allocation.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigNumOfTasks(t_Handle h_FmPort, t_FmPortRsrc *p_NumOfTasks);
/**************************************************************************//**
@Function FM_PORT_ConfigSizeOfFifo
@Description Calling this routine changes the max FIFO size configured for this port.
This function changes the internal driver data base from its
default configuration. Please refer to the driver's User Guide for
information on default FIFO sizes in the various devices.
[OP: 2KB]
[1G-RX, 1G-TX: 11KB]
[10G-RX, 10G-TX: 12KB]
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_SizeOfFifo A pointer to a structure of parameters defining
the FIFO allocation.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigSizeOfFifo(t_Handle h_FmPort, t_FmPortRsrc *p_SizeOfFifo);
/**************************************************************************//**
@Function FM_PORT_ConfigDeqHighPriority
@Description Calling this routine changes the dequeue priority in the
internal driver data base from its default configuration
1G: [DEFAULT_PORT_deqHighPriority_1G]
10G: [DEFAULT_PORT_deqHighPriority_10G]
May be used for Non-Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] highPri TRUE to select high priority, FALSE for normal operation.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDeqHighPriority(t_Handle h_FmPort, bool highPri);
/**************************************************************************//**
@Function FM_PORT_ConfigDeqType
@Description Calling this routine changes the dequeue type parameter in the
internal driver data base from its default configuration
[DEFAULT_PORT_deqType].
May be used for Non-Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] deqType According to QM definition.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDeqType(t_Handle h_FmPort, e_FmPortDeqType deqType);
/**************************************************************************//**
@Function FM_PORT_ConfigDeqPrefetchOption
@Description Calling this routine changes the dequeue prefetch option parameter in the
internal driver data base from its default configuration
[DEFAULT_PORT_deqPrefetchOption]
Note: Available for some chips only
May be used for Non-Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] deqPrefetchOption New option
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDeqPrefetchOption(t_Handle h_FmPort, e_FmPortDeqPrefetchOption deqPrefetchOption);
/**************************************************************************//**
@Function FM_PORT_ConfigDeqByteCnt
@Description Calling this routine changes the dequeue byte count parameter in
the internal driver data base from its default configuration
1G:[DEFAULT_PORT_deqByteCnt_1G].
10G:[DEFAULT_PORT_deqByteCnt_10G].
May be used for Non-Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] deqByteCnt New byte count
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDeqByteCnt(t_Handle h_FmPort, uint16_t deqByteCnt);
/**************************************************************************//**
@Function FM_PORT_ConfigBufferPrefixContent
@Description Defines the structure, size and content of the application buffer.
The prefix will
In Tx ports, if 'passPrsResult', the application
should set a value to their offsets in the prefix of
the FM will save the first 'privDataSize', than,
depending on 'passPrsResult' and 'passTimeStamp', copy parse result
and timeStamp, and the packet itself (in this order), to the
application buffer, and to offset.
Calling this routine changes the buffer margins definitions
in the internal driver data base from its default
configuration: Data size: [DEFAULT_PORT_bufferPrefixContent_privDataSize]
Pass Parser result: [DEFAULT_PORT_bufferPrefixContent_passPrsResult].
Pass timestamp: [DEFAULT_PORT_bufferPrefixContent_passTimeStamp].
May be used for all ports
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in,out] p_FmBufferPrefixContent A structure of parameters describing the
structure of the buffer.
Out parameter: Start margin - offset
of data from start of external buffer.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigBufferPrefixContent(t_Handle h_FmPort,
t_FmBufferPrefixContent *p_FmBufferPrefixContent);
/**************************************************************************//**
@Function FM_PORT_ConfigCheksumLastBytesIgnore
@Description Calling this routine changes the number of checksum bytes to ignore
parameter in the internal driver data base from its default configuration
[DEFAULT_PORT_cheksumLastBytesIgnore]
May be used by Tx & Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] cheksumLastBytesIgnore New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigCheksumLastBytesIgnore(t_Handle h_FmPort, uint8_t cheksumLastBytesIgnore);
/**************************************************************************//**
@Function FM_PORT_ConfigCutBytesFromEnd
@Description Calling this routine changes the number of bytes to cut from a
frame's end parameter in the internal driver data base
from its default configuration [DEFAULT_PORT_cutBytesFromEnd]
Note that if the result of (frame length before chop - cutBytesFromEnd) is
less than 14 bytes, the chop operation is not executed.
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] cutBytesFromEnd New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigCutBytesFromEnd(t_Handle h_FmPort, uint8_t cutBytesFromEnd);
/**************************************************************************//**
@Function FM_PORT_ConfigPoolDepletion
@Description Calling this routine enables pause frame generation depending on the
depletion status of BM pools. It also defines the conditions to activate
this functionality. By default, this functionality is disabled.
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_BufPoolDepletion A structure of pool depletion parameters
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigPoolDepletion(t_Handle h_FmPort, t_FmBufPoolDepletion *p_BufPoolDepletion);
/**************************************************************************//**
@Function FM_PORT_ConfigObservedPoolDepletion
@Description Calling this routine enables a mechanism to stop port enqueue
depending on the depletion status of selected BM pools.
It also defines the conditions to activate
this functionality. By default, this functionality is disabled.
Note: Available for some chips only
May be used for OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_FmPortObservedBufPoolDepletion A structure of parameters for pool depletion.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigObservedPoolDepletion(t_Handle h_FmPort,
t_FmPortObservedBufPoolDepletion *p_FmPortObservedBufPoolDepletion);
/**************************************************************************//**
@Function FM_PORT_ConfigExtBufPools
@Description This routine should be called for OP ports
that internally use BM buffer pools. In such cases, e.g. for fragmentation and
re-assembly, the FM needs new BM buffers. By calling this routine the user
specifies the BM buffer pools that should be used.
Note: Available for some chips only
May be used for OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_FmExtPools A structure of parameters for the external pools.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigExtBufPools(t_Handle h_FmPort, t_FmExtPools *p_FmExtPools);
/**************************************************************************//**
@Function FM_PORT_ConfigBackupPools
@Description Calling this routine allows the configuration of some of the BM pools
defined for this port as backup pools.
A pool configured to be a backup pool will be used only if all other
enabled non-backup pools are depleted.
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_FmPortBackupBmPools An array of pool id's. All pools specified here will
be defined as backup pools.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigBackupPools(t_Handle h_FmPort, t_FmBackupBmPools *p_FmPortBackupBmPools);
/**************************************************************************//**
@Function FM_PORT_ConfigFrmDiscardOverride
@Description Calling this routine changes the error frames destination parameter
in the internal driver data base from its default configuration:
override = [DEFAULT_PORT_frmDiscardOverride]
May be used for Rx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] override TRUE to override discarding of error frames and
enqueueing them to error queue.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigFrmDiscardOverride(t_Handle h_FmPort, bool override);
/**************************************************************************//**
@Function FM_PORT_ConfigErrorsToDiscard
@Description Calling this routine changes the behaviour on error parameter
in the internal driver data base from its default configuration:
[DEFAULT_PORT_errorsToDiscard].
If a requested error was previously defined as "ErrorsToEnqueue" it's
definition will change and the frame will be discarded.
Errors that were not defined either as "ErrorsToEnqueue" nor as
"ErrorsToDiscard", will be forwarded to CPU.
May be used for Rx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] errs A list of errors to discard
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigErrorsToDiscard(t_Handle h_FmPort, fmPortFrameErrSelect_t errs);
/**************************************************************************//**
@Function FM_PORT_ConfigDmaSwapData
@Description Calling this routine changes the DMA swap data aparameter
in the internal driver data base from its default
configuration [DEFAULT_PORT_dmaSwapData]
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] swapData New selection
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDmaSwapData(t_Handle h_FmPort, e_FmDmaSwapOption swapData);
/**************************************************************************//**
@Function FM_PORT_ConfigDmaIcCacheAttr
@Description Calling this routine changes the internal context cache
attribute parameter in the internal driver data base
from its default configuration [DEFAULT_PORT_dmaIntContextCacheAttr]
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] intContextCacheAttr New selection
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDmaIcCacheAttr(t_Handle h_FmPort, e_FmDmaCacheOption intContextCacheAttr);
/**************************************************************************//**
@Function FM_PORT_ConfigDmaHdrAttr
@Description Calling this routine changes the header cache
attribute parameter in the internal driver data base
from its default configuration [DEFAULT_PORT_dmaHeaderCacheAttr]
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] headerCacheAttr New selection
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDmaHdrAttr(t_Handle h_FmPort, e_FmDmaCacheOption headerCacheAttr);
/**************************************************************************//**
@Function FM_PORT_ConfigDmaScatterGatherAttr
@Description Calling this routine changes the scatter gather cache
attribute parameter in the internal driver data base
from its default configuration [DEFAULT_PORT_dmaScatterGatherCacheAttr]
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] scatterGatherCacheAttr New selection
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDmaScatterGatherAttr(t_Handle h_FmPort, e_FmDmaCacheOption scatterGatherCacheAttr);
/**************************************************************************//**
@Function FM_PORT_ConfigDmaWriteOptimize
@Description Calling this routine changes the write optimization
parameter in the internal driver data base
from its default configuration: By default optimize = [DEFAULT_PORT_dmaWriteOptimize].
Note:
1. For head optimization, data alignment must be >= 16 (supported by default).
3. For tail optimization, note that the optimization is performed by extending the write transaction
of the frame payload at the tail as needed to achieve optimal bus transfers, so that the last write
is extended to be on 16/64 bytes aligned block (chip dependent).
Relevant for non-Tx port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] optimize TRUE to enable optimization, FALSE for normal operation
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDmaWriteOptimize(t_Handle h_FmPort, bool optimize);
/**************************************************************************//**
@Function FM_PORT_ConfigNoScatherGather
@Description Calling this routine changes the noScatherGather parameter in internal driver data base
from its default configuration.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] noScatherGather (TRUE - frame is discarded if can not be stored in single buffer,
FALSE - frame can be stored in scatter gather (S/G) format).
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigNoScatherGather(t_Handle h_FmPort, bool noScatherGather);
/**************************************************************************//**
@Function FM_PORT_ConfigDfltColor
@Description Calling this routine changes the internal default color parameter
in the internal driver data base
from its default configuration [DEFAULT_PORT_color]
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] color New selection
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDfltColor(t_Handle h_FmPort, e_FmPortColor color);
/**************************************************************************//**
@Function FM_PORT_ConfigSyncReq
@Description Calling this routine changes the synchronization attribute parameter
in the internal driver data base from its default configuration:
syncReq = [DEFAULT_PORT_syncReq]
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] syncReq TRUE to request synchronization, FALSE otherwize.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigSyncReq(t_Handle h_FmPort, bool syncReq);
/**************************************************************************//**
@Function FM_PORT_ConfigForwardReuseIntContext
@Description This routine is relevant for Rx ports that are routed to OP port.
It changes the internal context reuse option in the internal
driver data base from its default configuration:
reuse = [DEFAULT_PORT_forwardIntContextReuse]
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] reuse TRUE to reuse internal context on frames
forwarded to OP port.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigForwardReuseIntContext(t_Handle h_FmPort, bool reuse);
/**************************************************************************//**
@Function FM_PORT_ConfigDontReleaseTxBufToBM
@Description This routine should be called if no Tx confirmation
is done, and yet buffers should not be released to the BM.
Normally, buffers are returned using the Tx confirmation
process. When Tx confirmation is not used (defFqid=0),
buffers are typically released to the BM. This routine
may be called to avoid this behavior and not release the
buffers.
May be used for Tx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigDontReleaseTxBufToBM(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_ConfigIMMaxRxBufLength
@Description Changes the maximum receive buffer length from its default
configuration: Closest rounded down power of 2 value of the
data buffer size.
The maximum receive buffer length directly affects the structure
of received frames (single- or multi-buffered) and the performance
of both the FM and the driver.
The selection between single- or multi-buffered frames should be
done according to the characteristics of the specific application.
The recommended mode is to use a single data buffer per packet,
as this mode provides the best performance. However, the user can
select to use multiple data buffers per packet.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] newVal Maximum receive buffer length (in bytes).
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
This routine is to be used only if Independent-Mode is enabled.
*//***************************************************************************/
t_Error FM_PORT_ConfigIMMaxRxBufLength(t_Handle h_FmPort, uint16_t newVal);
/**************************************************************************//**
@Function FM_PORT_ConfigIMRxBdRingLength
@Description Changes the receive BD ring length from its default
configuration:[DEFAULT_PORT_rxBdRingLength]
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] newVal The desired BD ring length.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
This routine is to be used only if Independent-Mode is enabled.
*//***************************************************************************/
t_Error FM_PORT_ConfigIMRxBdRingLength(t_Handle h_FmPort, uint16_t newVal);
/**************************************************************************//**
@Function FM_PORT_ConfigIMTxBdRingLength
@Description Changes the transmit BD ring length from its default
configuration:[DEFAULT_PORT_txBdRingLength]
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] newVal The desired BD ring length.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
This routine is to be used only if Independent-Mode is enabled.
*//***************************************************************************/
t_Error FM_PORT_ConfigIMTxBdRingLength(t_Handle h_FmPort, uint16_t newVal);
/**************************************************************************//**
@Function FM_PORT_ConfigIMFmanCtrlExternalStructsMemory
@Description Configures memory partition and attributes for FMan-Controller
data structures (e.g. BD rings).
Calling this routine changes the internal driver data base
from its default configuration
[DEFAULT_PORT_ImfwExtStructsMemId, DEFAULT_PORT_ImfwExtStructsMemAttr].
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] memId Memory partition ID.
@Param[in] memAttributes Memory attributes mask (a combination of MEMORY_ATTR_x flags).
@Return E_OK on success; Error code otherwise.
*//***************************************************************************/
t_Error FM_PORT_ConfigIMFmanCtrlExternalStructsMemory(t_Handle h_FmPort,
uint8_t memId,
uint32_t memAttributes);
/**************************************************************************//**
@Function FM_PORT_ConfigIMPolling
@Description Changes the Rx flow from interrupt driven (default) to polling.
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
This routine is to be used only if Independent-Mode is enabled.
*//***************************************************************************/
t_Error FM_PORT_ConfigIMPolling(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_ConfigMaxFrameLength
@Description Changes the definition of the max size of frame that should be
transmitted/received on this port from its default value [DEFAULT_PORT_maxFrameLength].
This parameter is used for confirmation of the minimum Fifo
size calculations and only for Tx ports or ports working in
independent mode. This should be larger than the maximum possible
MTU that will be used for this port (i.e. its MAC).
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] length Max size of frame
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
This routine is to be used only if Independent-Mode is enabled.
*//***************************************************************************/
t_Error FM_PORT_ConfigMaxFrameLength(t_Handle h_FmPort, uint16_t length);
/**************************************************************************//*
@Function FM_PORT_ConfigTxFifoMinFillLevel
@Description Calling this routine changes the fifo minimum
fill level parameter in the internal driver data base
from its default configuration [DEFAULT_PORT_txFifoMinFillLevel]
May be used for Tx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] minFillLevel New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigTxFifoMinFillLevel(t_Handle h_FmPort, uint32_t minFillLevel);
/**************************************************************************//*
@Function FM_PORT_ConfigFifoDeqPipelineDepth
@Description Calling this routine changes the fifo dequeue
pipeline depth parameter in the internal driver data base
from its default configuration: 1G ports: [DEFAULT_PORT_fifoDeqPipelineDepth_1G],
10G port: [DEFAULT_PORT_fifoDeqPipelineDepth_10G],
OP port: [DEFAULT_PORT_fifoDeqPipelineDepth_OH]
May be used for Tx/OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] deqPipelineDepth New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigFifoDeqPipelineDepth(t_Handle h_FmPort, uint8_t deqPipelineDepth);
/**************************************************************************//*
@Function FM_PORT_ConfigTxFifoLowComfLevel
@Description Calling this routine changes the fifo low comfort level
parameter in internal driver data base
from its default configuration [DEFAULT_PORT_txFifoLowComfLevel]
May be used for Tx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] fifoLowComfLevel New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigTxFifoLowComfLevel(t_Handle h_FmPort, uint32_t fifoLowComfLevel);
/**************************************************************************//*
@Function FM_PORT_ConfigRxFifoThreshold
@Description Calling this routine changes the threshold of the FIFO
fill level parameter in the internal driver data base
from its default configuration [DEFAULT_PORT_rxFifoThreshold]
If the total number of buffers which are
currently in use and associated with the
specific RX port exceed this threshold, the
BMI will signal the MAC to send a pause frame
over the link.
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] fifoThreshold New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigRxFifoThreshold(t_Handle h_FmPort, uint32_t fifoThreshold);
/**************************************************************************//*
@Function FM_PORT_ConfigRxFifoPriElevationLevel
@Description Calling this routine changes the priority elevation level
parameter in the internal driver data base from its default
configuration [DEFAULT_PORT_rxFifoPriElevationLevel]
If the total number of buffers which are currently in use and
associated with the specific RX port exceed the amount specified
in priElevationLevel, BMI will signal the main FM's DMA to
elevate the FM priority on the system bus.
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] priElevationLevel New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigRxFifoPriElevationLevel(t_Handle h_FmPort, uint32_t priElevationLevel);
#ifdef FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669
/**************************************************************************//*
@Function FM_PORT_ConfigBCBWorkaround
@Description Configures BCB errata workaround.
When BCB errata is applicable, the workaround is always
performed by FM Controller. Thus, this functions doesn't
actually enable errata workaround but rather allows driver
to perform adjustments required due to errata workaround
execution in FM controller.
Applying BCB workaround also configures FM_PORT_FRM_ERR_PHYSICAL
errors to be discarded. Thus FM_PORT_FRM_ERR_PHYSICAL can't be
set by FM_PORT_SetErrorsRoute() function.
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigBCBWorkaround(t_Handle h_FmPort);
#endif /* FM_HEAVY_TRAFFIC_HANG_ERRATA_FMAN_A005669 */
#if (DPAA_VERSION >= 11)
/**************************************************************************//*
@Function FM_PORT_ConfigInternalBuffOffset
@Description Configures internal buffer offset.
May be used for Rx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] val New value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ConfigInternalBuffOffset(t_Handle h_FmPort, uint8_t val);
#endif /* (DPAA_VERSION >= 11) */
/** @} */ /* end of FM_PORT_advanced_init_grp group */
/** @} */ /* end of FM_PORT_init_grp group */
/**************************************************************************//**
@Group FM_PORT_runtime_control_grp FM Port Runtime Control Unit
@Description FM Port Runtime control unit API functions, definitions and enums.
@{
*//***************************************************************************/
/**************************************************************************//**
@Description enum for defining FM Port counters
*//***************************************************************************/
typedef enum e_FmPortCounters {
e_FM_PORT_COUNTERS_CYCLE, /**< BMI performance counter */
e_FM_PORT_COUNTERS_TASK_UTIL, /**< BMI performance counter */
e_FM_PORT_COUNTERS_QUEUE_UTIL, /**< BMI performance counter */
e_FM_PORT_COUNTERS_DMA_UTIL, /**< BMI performance counter */
e_FM_PORT_COUNTERS_FIFO_UTIL, /**< BMI performance counter */
e_FM_PORT_COUNTERS_RX_PAUSE_ACTIVATION, /**< BMI Rx only performance counter */
e_FM_PORT_COUNTERS_FRAME, /**< BMI statistics counter */
e_FM_PORT_COUNTERS_DISCARD_FRAME, /**< BMI statistics counter */
e_FM_PORT_COUNTERS_DEALLOC_BUF, /**< BMI deallocate buffer statistics counter */
e_FM_PORT_COUNTERS_RX_BAD_FRAME, /**< BMI Rx only statistics counter */
e_FM_PORT_COUNTERS_RX_LARGE_FRAME, /**< BMI Rx only statistics counter */
e_FM_PORT_COUNTERS_RX_FILTER_FRAME, /**< BMI Rx & OP only statistics counter */
e_FM_PORT_COUNTERS_RX_LIST_DMA_ERR, /**< BMI Rx, OP & HC only statistics counter */
e_FM_PORT_COUNTERS_RX_OUT_OF_BUFFERS_DISCARD, /**< BMI Rx, OP & HC statistics counter */
e_FM_PORT_COUNTERS_PREPARE_TO_ENQUEUE_COUNTER, /**< BMI Rx, OP & HC only statistics counter */
e_FM_PORT_COUNTERS_WRED_DISCARD, /**< BMI OP & HC only statistics counter */
e_FM_PORT_COUNTERS_LENGTH_ERR, /**< BMI non-Rx statistics counter */
e_FM_PORT_COUNTERS_UNSUPPRTED_FORMAT, /**< BMI non-Rx statistics counter */
e_FM_PORT_COUNTERS_DEQ_TOTAL, /**< QMI total QM dequeues counter */
e_FM_PORT_COUNTERS_ENQ_TOTAL, /**< QMI total QM enqueues counter */
e_FM_PORT_COUNTERS_DEQ_FROM_DEFAULT, /**< QMI counter */
e_FM_PORT_COUNTERS_DEQ_CONFIRM /**< QMI counter */
} e_FmPortCounters;
typedef struct t_FmPortBmiStats {
uint32_t cntCycle;
uint32_t cntTaskUtil;
uint32_t cntQueueUtil;
uint32_t cntDmaUtil;
uint32_t cntFifoUtil;
uint32_t cntRxPauseActivation;
uint32_t cntFrame;
uint32_t cntDiscardFrame;
uint32_t cntDeallocBuf;
uint32_t cntRxBadFrame;
uint32_t cntRxLargeFrame;
uint32_t cntRxFilterFrame;
uint32_t cntRxListDmaErr;
uint32_t cntRxOutOfBuffersDiscard;
uint32_t cntWredDiscard;
uint32_t cntLengthErr;
uint32_t cntUnsupportedFormat;
} t_FmPortBmiStats;
/**************************************************************************//**
@Description Structure for Port id parameters.
Fields commented 'IN' are passed by the port module to be used
by the FM module.
Fields commented 'OUT' will be filled by FM before returning to port.
*//***************************************************************************/
typedef struct t_FmPortCongestionGrps {
uint16_t numOfCongestionGrpsToConsider; /**< The number of required CGs
to define the size of the following array */
uint8_t congestionGrpsToConsider[FM_PORT_NUM_OF_CONGESTION_GRPS];
/**< An array of CG indexes;
Note that the size of the array should be
'numOfCongestionGrpsToConsider'. */
#if (DPAA_VERSION >= 11)
bool pfcPrioritiesEn[FM_PORT_NUM_OF_CONGESTION_GRPS][FM_MAX_NUM_OF_PFC_PRIORITIES];
/**< a matrix that represents the map between the CG ids
defined in 'congestionGrpsToConsider' to the priorties
mapping array. */
#endif /* (DPAA_VERSION >= 11) */
} t_FmPortCongestionGrps;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response ARP Entry
*//***************************************************************************/
typedef struct t_FmPortDsarArpEntry
{
uint32_t ipAddress;
uint8_t mac[6];
bool isVlan;
uint16_t vid;
} t_FmPortDsarArpEntry;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response ARP info
*//***************************************************************************/
typedef struct t_FmPortDsarArpInfo
{
uint8_t tableSize;
t_FmPortDsarArpEntry *p_AutoResTable;
bool enableConflictDetection; /* when TRUE Conflict Detection will be checked and wake the host if needed */
} t_FmPortDsarArpInfo;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response NDP Entry
*//***************************************************************************/
typedef struct t_FmPortDsarNdpEntry
{
uint32_t ipAddress[4];
uint8_t mac[6];
bool isVlan;
uint16_t vid;
} t_FmPortDsarNdpEntry;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response NDP info
*//***************************************************************************/
typedef struct t_FmPortDsarNdpInfo
{
uint32_t multicastGroup;
uint8_t tableSizeAssigned;
t_FmPortDsarNdpEntry *p_AutoResTableAssigned; /* This list refer to solicitation IP addresses.
Note that all IP adresses must be from the same multicast group.
This will be checked and if not operation will fail. */
uint8_t tableSizeTmp;
t_FmPortDsarNdpEntry *p_AutoResTableTmp; /* This list refer to temp IP addresses.
Note that all temp IP adresses must be from the same multicast group.
This will be checked and if not operation will fail. */
bool enableConflictDetection; /* when TRUE Conflict Detection will be checked and wake the host if needed */
} t_FmPortDsarNdpInfo;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response ICMPV4 info
*//***************************************************************************/
typedef struct t_FmPortDsarEchoIpv4Info
{
uint8_t tableSize;
t_FmPortDsarArpEntry *p_AutoResTable;
} t_FmPortDsarEchoIpv4Info;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response ICMPV6 info
*//***************************************************************************/
typedef struct t_FmPortDsarEchoIpv6Info
{
uint8_t tableSize;
t_FmPortDsarNdpEntry *p_AutoResTable;
} t_FmPortDsarEchoIpv6Info;
/**************************************************************************//**
@Description Deep Sleep Auto Response SNMP OIDs table entry
*//***************************************************************************/
typedef struct {
uint16_t oidSize;
uint8_t *oidVal; /* only the oid string */
uint16_t resSize;
uint8_t *resVal; /* resVal will be the entire reply,
i.e. "Type|Length|Value" */
} t_FmPortDsarOidsEntry;
/**************************************************************************//**
@Description Deep Sleep Auto Response SNMP IPv4 Addresses Table Entry
Refer to the FMan Controller spec for more details.
*//***************************************************************************/
typedef struct
{
uint32_t ipv4Addr; /*!< 32 bit IPv4 Address. */
bool isVlan;
uint16_t vid; /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared */
/*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
} t_FmPortDsarSnmpIpv4AddrTblEntry;
/**************************************************************************//**
@Description Deep Sleep Auto Response SNMP IPv6 Addresses Table Entry
Refer to the FMan Controller spec for more details.
*//***************************************************************************/
typedef struct
{
uint32_t ipv6Addr[4]; /*!< 4 * 32 bit IPv6 Address. */
bool isVlan;
uint16_t vid; /*!< 12 bits VLAN ID. The 4 left-most bits should be cleared */
/*!< This field should be 0x0000 for an entry with no VLAN tag or a null VLAN ID. */
} t_FmPortDsarSnmpIpv6AddrTblEntry;
/**************************************************************************//**
@Description Deep Sleep Auto Response SNMP Descriptor
*//***************************************************************************/
typedef struct
{
uint16_t control; /**< Control bits [0-15]. */
uint16_t maxSnmpMsgLength; /**< Maximal allowed SNMP message length. */
uint16_t numOfIpv4Addresses; /**< Number of entries in IPv4 addresses table. */
uint16_t numOfIpv6Addresses; /**< Number of entries in IPv6 addresses table. */
t_FmPortDsarSnmpIpv4AddrTblEntry *p_Ipv4AddrTbl; /**< Pointer to IPv4 addresses table. */
t_FmPortDsarSnmpIpv6AddrTblEntry *p_Ipv6AddrTbl; /**< Pointer to IPv6 addresses table. */
uint8_t *p_RdOnlyCommunityStr; /**< Pointer to the Read Only Community String. */
uint8_t *p_RdWrCommunityStr; /**< Pointer to the Read Write Community String. */
t_FmPortDsarOidsEntry *p_OidsTbl; /**< Pointer to OIDs table. */
uint32_t oidsTblSize; /**< Number of entries in OIDs table. */
} t_FmPortDsarSnmpInfo;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response filtering Entry
*//***************************************************************************/
typedef struct t_FmPortDsarFilteringEntry
{
uint16_t srcPort;
uint16_t dstPort;
uint16_t srcPortMask;
uint16_t dstPortMask;
} t_FmPortDsarFilteringEntry;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response filtering info
*//***************************************************************************/
typedef struct t_FmPortDsarFilteringInfo
{
/* IP protocol filtering parameters */
uint8_t ipProtTableSize;
uint8_t *p_IpProtTablePtr;
bool ipProtPassOnHit; /* when TRUE, miss in the table will cause the packet to be droped,
hit will pass the packet to UDP/TCP filters if needed and if not
to the classification tree. If the classification tree will pass
the packet to a queue it will cause a wake interupt.
When FALSE it the other way around. */
/* UDP port filtering parameters */
uint8_t udpPortsTableSize;
t_FmPortDsarFilteringEntry *p_UdpPortsTablePtr;
bool udpPortPassOnHit; /* when TRUE, miss in the table will cause the packet to be droped,
hit will pass the packet to classification tree.
If the classification tree will pass the packet to a queue it
will cause a wake interupt.
When FALSE it the other way around. */
/* TCP port filtering parameters */
uint16_t tcpFlagsMask;
uint8_t tcpPortsTableSize;
t_FmPortDsarFilteringEntry *p_TcpPortsTablePtr;
bool tcpPortPassOnHit; /* when TRUE, miss in the table will cause the packet to be droped,
hit will pass the packet to classification tree.
If the classification tree will pass the packet to a queue it
will cause a wake interupt.
When FALSE it the other way around. */
} t_FmPortDsarFilteringInfo;
/**************************************************************************//**
@Description Structure for Deep Sleep Auto Response parameters
*//***************************************************************************/
typedef struct t_FmPortDsarParams
{
t_Handle h_FmPortTx;
t_FmPortDsarArpInfo *p_AutoResArpInfo;
t_FmPortDsarEchoIpv4Info *p_AutoResEchoIpv4Info;
t_FmPortDsarNdpInfo *p_AutoResNdpInfo;
t_FmPortDsarEchoIpv6Info *p_AutoResEchoIpv6Info;
t_FmPortDsarSnmpInfo *p_AutoResSnmpInfo;
t_FmPortDsarFilteringInfo *p_AutoResFilteringInfo;
} t_FmPortDsarParams;
/**************************************************************************//**
@Function FM_PORT_EnterDsar
@Description Enter Deep Sleep Auto Response mode.
This function write the apropriate values to in the relevant
tables in the MURAM.
@Param[in] h_FmPortRx - FM PORT module descriptor
@Param[in] params - Auto Response parameters
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_EnterDsar(t_Handle h_FmPortRx, t_FmPortDsarParams *params);
/**************************************************************************//**
@Function FM_PORT_EnterDsarFinal
@Description Enter Deep Sleep Auto Response mode.
This function sets the Tx port in independent mode as needed
and redirect the receive flow to go through the
Dsar Fman-ctrl code
@Param[in] h_DsarRxPort - FM Rx PORT module descriptor
@Param[in] h_DsarTxPort - FM Tx PORT module descriptor
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_EnterDsarFinal(t_Handle h_DsarRxPort, t_Handle h_DsarTxPort);
/**************************************************************************//**
@Function FM_PORT_ExitDsar
@Description Exit Deep Sleep Auto Response mode.
This function reverse the AR mode and put the ports back into
their original wake mode
@Param[in] h_FmPortRx - FM PORT Rx module descriptor
@Param[in] h_FmPortTx - FM PORT Tx module descriptor
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_EnterDsar().
*//***************************************************************************/
void FM_PORT_ExitDsar(t_Handle h_FmPortRx, t_Handle h_FmPortTx);
/**************************************************************************//**
@Function FM_PORT_IsInDsar
@Description This function returns TRUE if the port was set as Auto Response
and FALSE if not. Once Exit AR mode it will return FALSE as well
until re-enabled once more.
@Param[in] h_FmPort - FM PORT module descriptor
@Return E_OK on success; Error code otherwise.
*//***************************************************************************/
bool FM_PORT_IsInDsar(t_Handle h_FmPort);
typedef struct t_FmPortDsarStats
{
uint32_t arpArCnt;
uint32_t echoIcmpv4ArCnt;
uint32_t ndpArCnt;
uint32_t echoIcmpv6ArCnt;
uint32_t snmpGetCnt;
uint32_t snmpGetNextCnt;
} t_FmPortDsarStats;
/**************************************************************************//**
@Function FM_PORT_GetDsarStats
@Description Return statistics for Deep Sleep Auto Response
@Param[in] h_FmPortRx - FM PORT module descriptor
@Param[out] stats - structure containing the statistics counters
@Return E_OK on success; Error code otherwise.
*//***************************************************************************/
t_Error FM_PORT_GetDsarStats(t_Handle h_FmPortRx, t_FmPortDsarStats *stats);
#if (defined(DEBUG_ERRORS) && (DEBUG_ERRORS > 0))
/**************************************************************************//**
@Function FM_PORT_DumpRegs
@Description Dump all regs.
Calling this routine invalidates the descriptor.
@Param[in] h_FmPort - FM PORT module descriptor
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_DumpRegs(t_Handle h_FmPort);
#endif /* (defined(DEBUG_ERRORS) && ... */
/**************************************************************************//**
@Function FM_PORT_GetBufferDataOffset
@Description Relevant for Rx ports.
Returns the data offset from the beginning of the data buffer
@Param[in] h_FmPort - FM PORT module descriptor
@Return data offset.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
uint32_t FM_PORT_GetBufferDataOffset(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_GetBufferICInfo
@Description Returns the Internal Context offset from the beginning of the data buffer
@Param[in] h_FmPort - FM PORT module descriptor
@Param[in] p_Data - A pointer to the data buffer.
@Return Internal context info pointer on success, NULL if 'allOtherInfo' was not
configured for this port.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
uint8_t * FM_PORT_GetBufferICInfo(t_Handle h_FmPort, char *p_Data);
/**************************************************************************//**
@Function FM_PORT_GetBufferPrsResult
@Description Returns the pointer to the parse result in the data buffer.
In Rx ports this is relevant after reception, if parse
result is configured to be part of the data passed to the
application. For non Rx ports it may be used to get the pointer
of the area in the buffer where parse result should be
initialized - if so configured.
See FM_PORT_ConfigBufferPrefixContent for data buffer prefix
configuration.
@Param[in] h_FmPort - FM PORT module descriptor
@Param[in] p_Data - A pointer to the data buffer.
@Return Parse result pointer on success, NULL if parse result was not
configured for this port.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_FmPrsResult * FM_PORT_GetBufferPrsResult(t_Handle h_FmPort, char *p_Data);
/**************************************************************************//**
@Function FM_PORT_GetBufferTimeStamp
@Description Returns the time stamp in the data buffer.
Relevant for Rx ports for getting the buffer time stamp.
See FM_PORT_ConfigBufferPrefixContent for data buffer prefix
configuration.
@Param[in] h_FmPort - FM PORT module descriptor
@Param[in] p_Data - A pointer to the data buffer.
@Return A pointer to the hash result on success, NULL otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
uint64_t * FM_PORT_GetBufferTimeStamp(t_Handle h_FmPort, char *p_Data);
/**************************************************************************//**
@Function FM_PORT_GetBufferHashResult
@Description Given a data buffer, on the condition that hash result was defined
as a part of the buffer content (see FM_PORT_ConfigBufferPrefixContent)
this routine will return the pointer to the hash result location in the
buffer prefix.
@Param[in] h_FmPort - FM PORT module descriptor
@Param[in] p_Data - A pointer to the data buffer.
@Return A pointer to the hash result on success, NULL otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
uint8_t * FM_PORT_GetBufferHashResult(t_Handle h_FmPort, char *p_Data);
/**************************************************************************//**
@Function FM_PORT_Disable
@Description Gracefully disable an FM port. The port will not start new tasks after all
tasks associated with the port are terminated.
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
This is a blocking routine, it returns after port is
gracefully stopped, i.e. the port will not except new frames,
but it will finish all frames or tasks which were already began
*//***************************************************************************/
t_Error FM_PORT_Disable(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_Enable
@Description A runtime routine provided to allow disable/enable of port.
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_Enable(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_SetRateLimit
@Description Calling this routine enables rate limit algorithm.
By default, this functionality is disabled.
Note that rate-limit mechanism uses the FM time stamp.
The selected rate limit specified here would be
rounded DOWN to the nearest 16M.
May be used for Tx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_RateLimit A structure of rate limit parameters
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
If rate limit is set on a port that need to send PFC frames,
it might violate the stop transmit timing.
*//***************************************************************************/
t_Error FM_PORT_SetRateLimit(t_Handle h_FmPort, t_FmPortRateLimit *p_RateLimit);
/**************************************************************************//**
@Function FM_PORT_DeleteRateLimit
@Description Calling this routine disables and clears rate limit
initialization.
May be used for Tx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_DeleteRateLimit(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_SetPfcPrioritiesMappingToQmanWQ
@Description Calling this routine maps each PFC received priority to the transmit WQ.
This WQ will be blocked upon receiving a PFC frame with this priority.
May be used for Tx ports only.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] prio PFC priority (0-7).
@Param[in] wq Work Queue (0-7).
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetPfcPrioritiesMappingToQmanWQ(t_Handle h_FmPort, uint8_t prio, uint8_t wq);
/**************************************************************************//**
@Function FM_PORT_SetStatisticsCounters
@Description Calling this routine enables/disables port's statistics counters.
By default, counters are enabled.
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] enable TRUE to enable, FALSE to disable.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetStatisticsCounters(t_Handle h_FmPort, bool enable);
/**************************************************************************//**
@Function FM_PORT_SetFrameQueueCounters
@Description Calling this routine enables/disables port's enqueue/dequeue counters.
By default, counters are enabled.
May be used for all ports
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] enable TRUE to enable, FALSE to disable.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetFrameQueueCounters(t_Handle h_FmPort, bool enable);
/**************************************************************************//**
@Function FM_PORT_AnalyzePerformanceParams
@Description User may call this routine to so the driver will analyze if the
basic performance parameters are correct and also the driver may
suggest of improvements; The basic parameters are FIFO sizes, number
of DMAs and number of TNUMs for the port.
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_AnalyzePerformanceParams(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_SetAllocBufCounter
@Description Calling this routine enables/disables BM pool allocate
buffer counters.
By default, counters are enabled.
May be used for Rx ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] poolId BM pool id.
@Param[in] enable TRUE to enable, FALSE to disable.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, bool enable);
/**************************************************************************//**
@Function FM_PORT_GetBmiCounters
@Description Read port's BMI stat counters and place them into
a designated structure of counters.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[out] p_BmiStats counters structure
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_GetBmiCounters(t_Handle h_FmPort, t_FmPortBmiStats *p_BmiStats);
/**************************************************************************//**
@Function FM_PORT_GetCounter
@Description Reads one of the FM PORT counters.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] fmPortCounter The requested counter.
@Return Counter's current value.
@Cautions Allowed only following FM_PORT_Init().
Note that it is user's responsibility to call this routine only
for enabled counters, and there will be no indication if a
disabled counter is accessed.
*//***************************************************************************/
uint32_t FM_PORT_GetCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter);
/**************************************************************************//**
@Function FM_PORT_ModifyCounter
@Description Sets a value to an enabled counter. Use "0" to reset the counter.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] fmPortCounter The requested counter.
@Param[in] value The requested value to be written into the counter.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ModifyCounter(t_Handle h_FmPort, e_FmPortCounters fmPortCounter, uint32_t value);
/**************************************************************************//**
@Function FM_PORT_GetAllocBufCounter
@Description Reads one of the FM PORT buffer counters.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] poolId The requested pool.
@Return Counter's current value.
@Cautions Allowed only following FM_PORT_Init().
Note that it is user's responsibility to call this routine only
for enabled counters, and there will be no indication if a
disabled counter is accessed.
*//***************************************************************************/
uint32_t FM_PORT_GetAllocBufCounter(t_Handle h_FmPort, uint8_t poolId);
/**************************************************************************//**
@Function FM_PORT_ModifyAllocBufCounter
@Description Sets a value to an enabled counter. Use "0" to reset the counter.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] poolId The requested pool.
@Param[in] value The requested value to be written into the counter.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ModifyAllocBufCounter(t_Handle h_FmPort, uint8_t poolId, uint32_t value);
/**************************************************************************//**
@Function FM_PORT_AddCongestionGrps
@Description This routine effects the corresponding Tx port.
It should be called in order to enable pause
frame transmission in case of congestion in one or more
of the congestion groups relevant to this port.
Each call to this routine may add one or more congestion
groups to be considered relevant to this port.
May be used for Rx, or RX+OP ports only (depending on chip)
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_CongestionGrps A pointer to an array of congestion groups
id's to consider.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_AddCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps);
/**************************************************************************//**
@Function FM_PORT_RemoveCongestionGrps
@Description This routine effects the corresponding Tx port. It should be
called when congestion groups were
defined for this port and are no longer relevant, or pause
frames transmitting is not required on their behalf.
Each call to this routine may remove one or more congestion
groups to be considered relevant to this port.
May be used for Rx, or RX+OP ports only (depending on chip)
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_CongestionGrps A pointer to an array of congestion groups
id's to consider.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_RemoveCongestionGrps(t_Handle h_FmPort, t_FmPortCongestionGrps *p_CongestionGrps);
/**************************************************************************//**
@Function FM_PORT_IsStalled
@Description A routine for checking whether the specified port is stalled.
@Param[in] h_FmPort A handle to a FM Port module.
@Return TRUE if port is stalled, FALSE otherwize
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
bool FM_PORT_IsStalled(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_ReleaseStalled
@Description This routine may be called in case the port was stalled and may
now be released.
Note that this routine is available only on older FMan revisions
(FMan v2, DPAA v1.0 only).
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_ReleaseStalled(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_SetRxL4ChecksumVerify
@Description This routine is relevant for Rx ports (1G and 10G). The routine
set/clear the L3/L4 checksum verification (on RX side).
Note that this takes affect only if hw-parser is enabled!
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] l4Checksum boolean indicates whether to do L3/L4 checksum
on frames or not.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetRxL4ChecksumVerify(t_Handle h_FmPort, bool l4Checksum);
/**************************************************************************//**
@Function FM_PORT_SetErrorsRoute
@Description Errors selected for this routine will cause a frame with that error
to be enqueued to error queue.
Errors not selected for this routine will cause a frame with that error
to be enqueued to the one of the other port queues.
By default all errors are defined to be enqueued to error queue.
Errors that were configured to be discarded (at initialization)
may not be selected here.
May be used for Rx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] errs A list of errors to enqueue to error queue
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Config() and before FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetErrorsRoute(t_Handle h_FmPort, fmPortFrameErrSelect_t errs);
/**************************************************************************//**
@Function FM_PORT_SetIMExceptions
@Description Calling this routine enables/disables FM PORT interrupts.
@Param[in] h_FmPort FM PORT module descriptor.
@Param[in] exception The exception to be selected.
@Param[in] enable TRUE to enable interrupt, FALSE to mask it.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
This routine should NOT be called from guest-partition
(i.e. guestId != NCSW_MASTER_ID)
*//***************************************************************************/
t_Error FM_PORT_SetIMExceptions(t_Handle h_FmPort, e_FmPortExceptions exception, bool enable);
/**************************************************************************//*
@Function FM_PORT_SetPerformanceCounters
@Description Calling this routine enables/disables port's performance counters.
By default, counters are enabled.
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] enable TRUE to enable, FALSE to disable.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetPerformanceCounters(t_Handle h_FmPort, bool enable);
/**************************************************************************//*
@Function FM_PORT_SetPerformanceCountersParams
@Description Calling this routine defines port's performance
counters parameters.
May be used for all port types
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_FmPortPerformanceCnt A pointer to a structure of performance
counters parameters.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetPerformanceCountersParams(t_Handle h_FmPort, t_FmPortPerformanceCnt *p_FmPortPerformanceCnt);
/**************************************************************************//**
@Group FM_PORT_pcd_runtime_control_grp FM Port PCD Runtime Control Unit
@Description FM Port PCD Runtime control unit API functions, definitions and enums.
@{
*//***************************************************************************/
/**************************************************************************//**
@Description A structure defining the KG scheme after the parser.
This is relevant only to change scheme selection mode - from
direct to indirect and vice versa, or when the scheme is selected directly,
to select the scheme id.
*//***************************************************************************/
typedef struct t_FmPcdKgSchemeSelect {
bool direct; /**< TRUE to use 'h_Scheme' directly, FALSE to use LCV. */
t_Handle h_DirectScheme; /**< Scheme handle, selects the scheme after parser;
Relevant only when 'direct' is TRUE. */
} t_FmPcdKgSchemeSelect;
/**************************************************************************//**
@Description A structure of scheme parameters
*//***************************************************************************/
typedef struct t_FmPcdPortSchemesParams {
uint8_t numOfSchemes; /**< Number of schemes for port to be bound to. */
t_Handle h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES]; /**< Array of 'numOfSchemes' schemes for the
port to be bound to */
} t_FmPcdPortSchemesParams;
/**************************************************************************//**
@Description Union for defining port protocol parameters for parser
*//***************************************************************************/
typedef union u_FmPcdHdrPrsOpts {
/* MPLS */
struct {
bool labelInterpretationEnable; /**< When this bit is set, the last MPLS label will be
interpreted as described in HW spec table. When the bit
is cleared, the parser will advance to MPLS next parse */
e_NetHeaderType nextParse; /**< must be equal or higher than IPv4 */
} mplsPrsOptions;
/* VLAN */
struct {
uint16_t tagProtocolId1; /**< User defined Tag Protocol Identifier, to be recognized
on VLAN TAG on top of 0x8100 and 0x88A8 */
uint16_t tagProtocolId2; /**< User defined Tag Protocol Identifier, to be recognized
on VLAN TAG on top of 0x8100 and 0x88A8 */
} vlanPrsOptions;
/* PPP */
struct{
bool enableMTUCheck; /**< Check validity of MTU according to RFC2516 */
} pppoePrsOptions;
/* IPV6 */
struct{
bool routingHdrEnable; /**< TRUE to enable routing header, otherwise ignore */
} ipv6PrsOptions;
/* UDP */
struct{
bool padIgnoreChecksum; /**< TRUE to ignore pad in checksum */
} udpPrsOptions;
/* TCP */
struct {
bool padIgnoreChecksum; /**< TRUE to ignore pad in checksum */
} tcpPrsOptions;
} u_FmPcdHdrPrsOpts;
/**************************************************************************//**
@Description A structure for defining each header for the parser
*//***************************************************************************/
typedef struct t_FmPcdPrsAdditionalHdrParams {
e_NetHeaderType hdr; /**< Selected header; use HEADER_TYPE_NONE
to indicate that sw parser is to run first
(before HW parser, and independent of the
existence of any protocol), in this case,
swPrsEnable must be set, and all other
parameters are irrelevant. */
bool errDisable; /**< TRUE to disable error indication */
bool swPrsEnable; /**< Enable jump to SW parser when this
header is recognized by the HW parser. */
uint8_t indexPerHdr; /**< Normally 0, if more than one sw parser
attachments exists for the same header,
(in the main sw parser code) use this
index to distinguish between them. */
bool usePrsOpts; /**< TRUE to use parser options. */
u_FmPcdHdrPrsOpts prsOpts; /**< A union according to header type,
defining the parser options selected.*/
} t_FmPcdPrsAdditionalHdrParams;
/**************************************************************************//**
@Description struct for defining port PCD parameters
*//***************************************************************************/
typedef struct t_FmPortPcdPrsParams {
uint8_t prsResultPrivateInfo; /**< The private info provides a method of inserting
port information into the parser result. This information
may be extracted by Keygen and be used for frames
distribution when a per-port distinction is required,
it may also be used as a port logical id for analyzing
incoming frames. */
uint8_t parsingOffset; /**< Number of bytes from beginning of packet to start parsing */
e_NetHeaderType firstPrsHdr; /**< The type of the first header expected at 'parsingOffset' */
bool includeInPrsStatistics; /**< TRUE to include this port in the parser statistics;
NOTE: this field is not valid when the FM is in "guest" mode
and IPC is not available. */
uint8_t numOfHdrsWithAdditionalParams; /**< Normally 0, some headers may get
special parameters */
t_FmPcdPrsAdditionalHdrParams additionalParams[FM_PCD_PRS_NUM_OF_HDRS];
/**< 'numOfHdrsWithAdditionalParams' structures
of additional parameters
for each header that requires them */
bool setVlanTpid1; /**< TRUE to configure user selection of Ethertype to
indicate a VLAN tag (in addition to the TPID values
0x8100 and 0x88A8). */
uint16_t vlanTpid1; /**< extra tag to use if setVlanTpid1=TRUE. */
bool setVlanTpid2; /**< TRUE to configure user selection of Ethertype to
indicate a VLAN tag (in addition to the TPID values
0x8100 and 0x88A8). */
uint16_t vlanTpid2; /**< extra tag to use if setVlanTpid1=TRUE. */
} t_FmPortPcdPrsParams;
/**************************************************************************//**
@Description struct for defining coarse alassification parameters
*//***************************************************************************/
typedef struct t_FmPortPcdCcParams {
t_Handle h_CcTree; /**< A handle to a CC tree */
} t_FmPortPcdCcParams;
/**************************************************************************//**
@Description struct for defining keygen parameters
*//***************************************************************************/
typedef struct t_FmPortPcdKgParams {
uint8_t numOfSchemes; /**< Number of schemes for port to be bound to. */
t_Handle h_Schemes[FM_PCD_KG_NUM_OF_SCHEMES];
/**< Array of 'numOfSchemes' schemes handles for the
port to be bound to */
bool directScheme; /**< TRUE for going from parser to a specific scheme,
regardless of parser result */
t_Handle h_DirectScheme; /**< relevant only if direct == TRUE, Scheme handle,
as returned by FM_PCD_KgSetScheme */
} t_FmPortPcdKgParams;
/**************************************************************************//**
@Description struct for defining policer parameters
*//***************************************************************************/
typedef struct t_FmPortPcdPlcrParams {
t_Handle h_Profile; /**< Selected profile handle */
} t_FmPortPcdPlcrParams;
/**************************************************************************//**
@Description struct for defining port PCD parameters
*//***************************************************************************/
typedef struct t_FmPortPcdParams {
e_FmPortPcdSupport pcdSupport; /**< Relevant for Rx and offline ports only.
Describes the active PCD engines for this port. */
t_Handle h_NetEnv; /**< HL Unused in PLCR only mode */
t_FmPortPcdPrsParams *p_PrsParams; /**< Parser parameters for this port */
t_FmPortPcdCcParams *p_CcParams; /**< Coarse classification parameters for this port */
t_FmPortPcdKgParams *p_KgParams; /**< Keygen parameters for this port */
t_FmPortPcdPlcrParams *p_PlcrParams; /**< Policer parameters for this port; Relevant for one of
following cases:
e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or
e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR were selected,
or if any flow uses a KG scheme were policer
profile is not generated
('bypassPlcrProfileGeneration selected'). */
t_Handle h_IpReassemblyManip; /**< IP Reassembly manipulation */
#if (DPAA_VERSION >= 11)
t_Handle h_CapwapReassemblyManip;/**< CAPWAP Reassembly manipulation */
#endif /* (DPAA_VERSION >= 11) */
} t_FmPortPcdParams;
/**************************************************************************//**
@Description A structure for defining the Parser starting point
*//***************************************************************************/
typedef struct t_FmPcdPrsStart {
uint8_t parsingOffset; /**< Number of bytes from beginning of packet to
start parsing */
e_NetHeaderType firstPrsHdr; /**< The type of the first header axpected at
'parsingOffset' */
} t_FmPcdPrsStart;
#if (DPAA_VERSION >= 11)
/**************************************************************************//**
@Description struct for defining external buffer margins
*//***************************************************************************/
typedef struct t_FmPortVSPAllocParams {
uint8_t numOfProfiles; /**< Number of Virtual Storage Profiles; must be a power of 2 */
uint8_t dfltRelativeId; /**< The default Virtual-Storage-Profile-id dedicated to Rx/OP port
The same default Virtual-Storage-Profile-id will be for coupled Tx port
if relevant function called for Rx port */
t_Handle h_FmTxPort; /**< Handle to coupled Tx Port; not relevant for OP port. */
} t_FmPortVSPAllocParams;
#endif /* (DPAA_VERSION >= 11) */
/**************************************************************************//**
@Function FM_PORT_SetPCD
@Description Calling this routine defines the port's PCD configuration.
It changes it from its default configuration which is PCD
disabled (BMI to BMI) and configures it according to the passed
parameters.
May be used for Rx and OP ports only
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_FmPortPcd A Structure of parameters defining the port's PCD
configuration.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_SetPCD(t_Handle h_FmPort, t_FmPortPcdParams *p_FmPortPcd);
/**************************************************************************//**
@Function FM_PORT_DeletePCD
@Description Calling this routine releases the port's PCD configuration.
The port returns to its default configuration which is PCD
disabled (BMI to BMI) and all PCD configuration is removed.
May be used for Rx and OP ports which are
in PCD mode only
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_DeletePCD(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_AttachPCD
@Description This routine may be called after FM_PORT_DetachPCD was called,
to return to the originally configured PCD support flow.
The couple of routines are used to allow PCD configuration changes
that demand that PCD will not be used while changes take place.
May be used for Rx and OP ports which are
in PCD mode only
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
*//***************************************************************************/
t_Error FM_PORT_AttachPCD(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_DetachPCD
@Description Calling this routine detaches the port from its PCD functionality.
The port returns to its default flow which is BMI to BMI.
May be used for Rx and OP ports which are
in PCD mode only
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_AttachPCD().
*//***************************************************************************/
t_Error FM_PORT_DetachPCD(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_PcdPlcrAllocProfiles
@Description This routine may be called only for ports that use the Policer in
order to allocate private policer profiles.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] numOfProfiles The number of required policer profiles
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(),
and before FM_PORT_SetPCD().
*//***************************************************************************/
t_Error FM_PORT_PcdPlcrAllocProfiles(t_Handle h_FmPort, uint16_t numOfProfiles);
/**************************************************************************//**
@Function FM_PORT_PcdPlcrFreeProfiles
@Description This routine should be called for freeing private policer profiles.
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init() and FM_PCD_Init(),
and before FM_PORT_SetPCD().
*//***************************************************************************/
t_Error FM_PORT_PcdPlcrFreeProfiles(t_Handle h_FmPort);
#if (DPAA_VERSION >= 11)
/**************************************************************************//**
@Function FM_PORT_VSPAlloc
@Description This routine allocated VSPs per port and forces the port to work
in VSP mode. Note that the port is initialized by default with the
physical-storage-profile only.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_Params A structure of parameters for allocation VSP's per port
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init(), and before FM_PORT_SetPCD()
and also before FM_PORT_Enable(); i.e. the port should be disabled.
*//***************************************************************************/
t_Error FM_PORT_VSPAlloc(t_Handle h_FmPort, t_FmPortVSPAllocParams *p_Params);
#endif /* (DPAA_VERSION >= 11) */
/**************************************************************************//**
@Function FM_PORT_PcdKgModifyInitialScheme
@Description This routine may be called only for ports that use the keygen in
order to change the initial scheme frame should be routed to.
The change may be of a scheme id (in case of direct mode),
from direct to indirect, or from indirect to direct - specifying the scheme id.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_FmPcdKgScheme A structure of parameters for defining whether
a scheme is direct/indirect, and if direct - scheme id.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
*//***************************************************************************/
t_Error FM_PORT_PcdKgModifyInitialScheme (t_Handle h_FmPort, t_FmPcdKgSchemeSelect *p_FmPcdKgScheme);
/**************************************************************************//**
@Function FM_PORT_PcdPlcrModifyInitialProfile
@Description This routine may be called for ports with flows
e_FM_PORT_PCD_SUPPORT_PLCR_ONLY or e_FM_PORT_PCD_SUPPORT_PRS_AND_PLCR
only, to change the initial Policer profile frame should be
routed to. The change may be of a profile and/or absolute/direct
mode selection.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] h_Profile Policer profile handle
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
*//***************************************************************************/
t_Error FM_PORT_PcdPlcrModifyInitialProfile (t_Handle h_FmPort, t_Handle h_Profile);
/**************************************************************************//**
@Function FM_PORT_PcdCcModifyTree
@Description This routine may be called for ports that use coarse classification tree
if the user wishes to replace the tree. The routine may not be called while port
receives packets using the PCD functionalities, therefor port must be first detached
from the PCD, only than the routine may be called, and than port be attached to PCD again.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] h_CcTree A CC tree that was already built. The tree id as returned from
the BuildTree routine.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init(), FM_PORT_SetPCD() and FM_PORT_DetachPCD()
*//***************************************************************************/
t_Error FM_PORT_PcdCcModifyTree (t_Handle h_FmPort, t_Handle h_CcTree);
/**************************************************************************//**
@Function FM_PORT_PcdKgBindSchemes
@Description These routines may be called for adding more schemes for the
port to be bound to. The selected schemes are not added,
just this specific port starts using them.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_PortScheme A structure defining the list of schemes to be added.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
*//***************************************************************************/
t_Error FM_PORT_PcdKgBindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme);
/**************************************************************************//**
@Function FM_PORT_PcdKgUnbindSchemes
@Description These routines may be called for adding more schemes for the
port to be bound to. The selected schemes are not removed or invalidated,
just this specific port stops using them.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_PortScheme A structure defining the list of schemes to be added.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init() and FM_PORT_SetPCD().
*//***************************************************************************/
t_Error FM_PORT_PcdKgUnbindSchemes (t_Handle h_FmPort, t_FmPcdPortSchemesParams *p_PortScheme);
/**************************************************************************//**
@Function FM_PORT_GetIPv4OptionsCount
@Description TODO
@Param[in] h_FmPort A handle to a FM Port module.
@Param[out] p_Ipv4OptionsCount will hold the counter value
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init()
*//***************************************************************************/
t_Error FM_PORT_GetIPv4OptionsCount(t_Handle h_FmPort, uint32_t *p_Ipv4OptionsCount);
/** @} */ /* end of FM_PORT_pcd_runtime_control_grp group */
/** @} */ /* end of FM_PORT_runtime_control_grp group */
/**************************************************************************//**
@Group FM_PORT_runtime_data_grp FM Port Runtime Data-path Unit
@Description FM Port Runtime data unit API functions, definitions and enums.
This API is valid only if working in Independent-Mode.
@{
*//***************************************************************************/
/**************************************************************************//**
@Function FM_PORT_ImTx
@Description Tx function, called to transmit a data buffer on the port.
@Param[in] h_FmPort A handle to a FM Port module.
@Param[in] p_Data A pointer to an LCP data buffer.
@Param[in] length Size of data for transmission.
@Param[in] lastBuffer Buffer position - TRUE for the last buffer
of a frame, including a single buffer frame
@Param[in] h_BufContext A handle of the user acossiated with this buffer
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
NOTE - This routine can be used only when working in
Independent-Mode mode.
*//***************************************************************************/
t_Error FM_PORT_ImTx( t_Handle h_FmPort,
uint8_t *p_Data,
uint16_t length,
bool lastBuffer,
t_Handle h_BufContext);
/**************************************************************************//**
@Function FM_PORT_ImTxConf
@Description Tx port confirmation routine, optional, may be called to verify
transmission of all frames. The procedure performed by this
routine will be performed automatically on next buffer transmission,
but if desired, calling this routine will invoke this action on
demand.
@Param[in] h_FmPort A handle to a FM Port module.
@Cautions Allowed only following FM_PORT_Init().
NOTE - This routine can be used only when working in
Independent-Mode mode.
*//***************************************************************************/
void FM_PORT_ImTxConf(t_Handle h_FmPort);
/**************************************************************************//**
@Function FM_PORT_ImRx
@Description Rx function, may be called to poll for received buffers.
Normally, Rx process is invoked by the driver on Rx interrupt.
Alternatively, this routine may be called on demand.
@Param[in] h_FmPort A handle to a FM Port module.
@Return E_OK on success; Error code otherwise.
@Cautions Allowed only following FM_PORT_Init().
NOTE - This routine can be used only when working in
Independent-Mode mode.
*//***************************************************************************/
t_Error FM_PORT_ImRx(t_Handle h_FmPort);
/** @} */ /* end of FM_PORT_runtime_data_grp group */
/** @} */ /* end of FM_PORT_grp group */
/** @} */ /* end of FM_grp group */
#ifdef NCSW_BACKWARD_COMPATIBLE_API
#define FM_PORT_ConfigTxFifoDeqPipelineDepth FM_PORT_ConfigFifoDeqPipelineDepth
#endif /* NCSW_BACKWARD_COMPATIBLE_API */
#endif /* __FM_PORT_EXT */