/* * Copyright (C) 2013 STMicroelectronics (R&D) Limited. * Author: Srinivas Kandagatla <srinivas.kandagatla@st.com> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * publishhed by the Free Software Foundation. */ #include <dt-bindings/input/input.h> / { memory{ device_type = "memory"; reg = <0x60000000 0x40000000>; }; chosen { bootargs = "console=ttyAS0,115200 clk_ignore_unused"; linux,stdout-path = &serial2; }; aliases { ttyAS0 = &serial2; ethernet0 = ðernet0; ethernet1 = ðernet1; }; soc { serial2: serial@fed32000 { status = "okay"; }; leds { compatible = "gpio-leds"; fp_led { #gpio-cells = <1>; label = "Front Panel LED"; gpios = <&pio105 7>; linux,default-trigger = "heartbeat"; }; }; /* HDMI Tx I2C */ i2c@fed41000 { /* HDMI V1.3a supports Standard mode only */ clock-frequency = <100000>; i2c-min-scl-pulse-width-us = <0>; i2c-min-sda-pulse-width-us = <5>; status = "okay"; }; ethernet0: dwmac@fe810000 { status = "okay"; phy-mode = "mii"; pinctrl-0 = <&pinctrl_mii0>; snps,reset-gpio = <&pio106 2>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; ethernet1: dwmac@fef08000 { status = "disabled"; phy-mode = "mii"; st,tx-retime-src = "txclk"; snps,reset-gpio = <&pio4 7>; snps,reset-active-low; snps,reset-delays-us = <0 10000 10000>; }; keyscan: keyscan@fe4b0000 { keypad,num-rows = <4>; keypad,num-columns = <4>; st,debounce-us = <5000>; linux,keymap = < MATRIX_KEY(0x00, 0x00, KEY_F13) MATRIX_KEY(0x00, 0x01, KEY_F9) MATRIX_KEY(0x00, 0x02, KEY_F5) MATRIX_KEY(0x00, 0x03, KEY_F1) MATRIX_KEY(0x01, 0x00, KEY_F14) MATRIX_KEY(0x01, 0x01, KEY_F10) MATRIX_KEY(0x01, 0x02, KEY_F6) MATRIX_KEY(0x01, 0x03, KEY_F2) MATRIX_KEY(0x02, 0x00, KEY_F15) MATRIX_KEY(0x02, 0x01, KEY_F11) MATRIX_KEY(0x02, 0x02, KEY_F7) MATRIX_KEY(0x02, 0x03, KEY_F3) MATRIX_KEY(0x03, 0x00, KEY_F16) MATRIX_KEY(0x03, 0x01, KEY_F12) MATRIX_KEY(0x03, 0x02, KEY_F8) MATRIX_KEY(0x03, 0x03, KEY_F4) >; }; }; }; |