<HTML>
<HEAD>
<TITLE>Solaris hints and kinks</title><link href="scripts/style.css" type="text/css" rel="stylesheet">
</HEAD>
<BODY>
Information on compiling and executing ntpd under Solaris.
<BR>
<p>Last update:
<!-- #BeginDate format:En2m -->27-Jan-2014 05:31<!-- #EndDate -->
UTC,
John Hawkinson,
<! -- This is deliberately not a mailto -- > <jhawk@MIT.EDU>
</p>
<P>
If you're not running Solaris 2.5.1 or later, it is likely
that you will have problems; upgrading would be a really good plan.
<P>
<H3>All Solaris versions</H3>
<P>
We have a report that says starting with Solaris 2.6 we should leave
<I>dosynctodr</I> alone.
<A HREF="solaris-dosynctodr.html">Here is the report</A>.
<P>
Proper operation of ntp under Solaris may require setting the kernel
variable <I>dosynctodr</I> to zero (meaning "do not synchronize the clock
to the hardware time-of-day clock"). This can be done with the
tickadj utility:
<BLOCKQUOTE><TT>
tickadj -s
</TT></BLOCKQUOTE>
If you prefer, it can also be done with the native Solaris kernel debugger:
<BLOCKQUOTE><TT>
echo dosynctodr/W0 | adb -k -w /dev/ksyms /dev/mem
</BLOCKQUOTE></TT>
<P>
Or, it can also be set by adding a line to /etc/system:
<BLOCKQUOTE><TT>
set dosynctodr = 0
</BLOCKQUOTE></TT>
<P>
Instead of the <I>tick</I> kernel variable, which many operating
systems use to control microseconds added to the system time every
clock tick (c.f. <A HREF="#frequency_tolerance">Dealing
with Frequency Tolerance Violations</A>), Solaris has the variables
<I>nsec_per_tick</I> and <I>usec_per_tick</I>.
<P>
<I>nsec_per_tick</I> and <I>usec_per_tick</I> control the number of
nanoseconds and microseconds, respectively, added to the system clock
each clock interrupt. Enterprising souls may set these based on
information collected by ntpd in the <CODE>/etc/ntp.drift</CODE> file
to correct for individual hardware variations.
<P>
On UltraSPARC systems, <I>nsec_per_tick</I> and <I>usec_per_tick</I>
are ignored in favor of the <I>cpu_tick_freq</I> variable, which
should be automatically be determined by the PROM in an accurate
fashion.
<P>
In general, the same ntp binaries should not be used across multiple
operating system releases. There is enough variation in the core operating
system support for timekeeping that a rebuild of ntpd for the idiosyncracies
of your specific operating system version is advisable.
<P>
It is recommended that ntp be started via a script like <A
HREF="solaris.xtra.S99ntpd">this one</A>, installed in
<CODE>/etc/init.d/ntpd</CODE> with a symbol link from
<CODE>/etc/rc2.d/S99ntpd</CODE>.
<a id="frequency_tolerance" />
<h4>Dealing with Frequency Tolerance Violations (<tt>tickadj</tt> and
Friends)</h4>
The NTP Version 3 specification RFC-1305 calls for a maximum
oscillator frequency tolerance of +-100 parts-per-million (PPM), which is
representative of those components suitable for use in relatively
inexpensive workstation platforms. For those platforms meeting this
tolerance, NTP will automatically compensate for the frequency errors of the
individual oscillator and no further adjustments are required, either to the
configuration file or to various kernel variables. For the NTP Version 4
release, this tolerance has been increased to +-500 PPM. <p>However, in the
case of certain notorious platforms, in particular Sun 4.1.1 systems, the
performance can be improved by adjusting the values of certain kernel
variables; in particular, <tt>tick</tt> and <tt>tickadj</tt>. The variable
<tt>tick</tt> is the increment in microseconds added to the system time on
each interval- timer interrupt, while the variable <tt>tickadj</tt> is used
by the time adjustment code as a slew rate, in microseconds per tick. When
the time is being adjusted via a call to the system routine
<tt>adjtime()</tt>, the kernel increases or reduces tick by <tt>tickadj</tt>
microseconds per tick until the specified adjustment has been
completed. Unfortunately, in most Unix implementations the tick increment
must be either zero or plus/minus exactly <tt>tickadj</tt> microseconds,
meaning that adjustments are truncated to be an integral multiple of
<tt>tickadj</tt> (this latter behaviour is a misfeature, and is the only
reason the <tt>tickadj</tt> code needs to concern itself with the internal
implementation of <tt>tickadj</tt> at all). In addition, the stock Unix
implementation considers it an error to request another adjustment before a
prior one has completed.</p> <p>Thus, to make very sure it avoids problems
related to the roundoff, the <tt>tickadj</tt> program can be used to adjust
the values of <tt>tick</tt> and <tt>tickadj</tt>. This ensures that all
adjustments given to <tt>adjtime()</tt> are an even multiple of
<tt>tickadj</tt> microseconds and computes the largest adjustment that can
be completed in the adjustment interval (using both the value of
<tt>tick</tt> and the value of <tt>tickadj</tt>) so it can avoid exceeding
this limit. It is important to note that not all systems will allow
inspection or modification of kernel variables other than at system build
time. It is also important to know that, with the current NTP tolerances, it
is rarely necessary to make these changes, but in many cases they will
substantially improve the general accuracy of the time service.</p>
<p>Unfortunately, the value of <tt>tickadj</tt> set by default is almost
always too large for <tt>ntpd</tt>. NTP operates by continuously making
small adjustments to the clock, usually at one-second intervals. If
<tt>tickaj</tt> is set too large, the adjustments will disappear in the
roundoff; while, if <tt>tickadj</tt> is too small, NTP will have difficulty
if it needs to make an occasional large adjustment. While the daemon itself
will read the kernel's values of these variables, it will not change the
values, even if they are unsuitable. You must do this yourself before the
daemon is started using the <tt>tickadj</tt> program included in the
<tt>./util</tt> directory of the distribution. Note that the latter program
will also compute an optimal value of <tt>tickadj</tt> for NTP use based on
the kernel's value of <tt>tick</tt>.</p> <p>The <tt>tickadj</tt> program can
reset several other kernel variables if asked. It can change the value of
<tt>tick</tt> if asked. This is handy to compensate for kernel bugs which
cause the clock to run with a very large frequency error, as with SunOS
4.1.1 systems. It can also be used to set the value of the kernel
<tt>dosynctodr</tt> variable to zero. This variable controls whether to
synchronize the system clock to the time-of-day clock, something you really
don't want to be happen when <tt>ntpd</tt> is trying to keep it under
control. In some systems, such as recent Sun Solaris kernels, the
<tt>dosynctodr</tt > variable is the only one that can be changed by the
<tt>tickadj</tt> program. In this and other modern kernels, it is not
necessary to change the other variables in any case.</p>
<p>We have a report that says starting with Solaris 2.6 we should leave
<i>dosynctodr</i> alone.</p> <p>In order to maintain reasonable correctness
bounds, as well as reasonably good accuracy with acceptable polling
intervals, <tt>ntpd</tt> will complain if the frequency error is greater
than 500 PPM. For machines with a value of <tt>tick</tt> in the 10-ms range,
a change of one in the value of <tt>tick</tt> will change the frequency by
about 100 PPM. In order to determine the value of <tt>tick</tt> for a
particular CPU, disconnect the machine from all source s of time
(<tt>dosynctodr</tt> = 0) and record its actual time compared to an outside
source (eyeball-and-wristwatch will do) over a day or more. Multiply the
time change over the day by 0.116 and add or subtract the result to tick,
depending on whether the CPU is fast or slow. An example call to
<tt>tickadj</tt> useful on SunOS 4.1.1 is:</p>
<pre>
<tt>tickadj</tt> -t 9999 -a 5 -s
</pre>
which sets tick 100 PPM fast, <tt>tickadj</tt> to 5 microseconds and turns
off the clock/calendar chip fiddle. This line can be added to the <tt
>rc.local</tt> configuration file to automatically set the kernel variables
at boot time. <p>All this stuff about diddling kernel variables so the NTP
daemon will work is really silly. If vendors would ship machines with clocks
that kept reasonable time and would make their <tt>adjtime()</tt> system
call apply the slew it is given exactly, independent of the value of
<tt>tickadj</tt>, all this could go away. This is in fact the case on many
current Unix systems.</p>
<H3>Solaris 2.6</H3>
<P>
Solaris 2.6 adds support for kernel PLL timekeeping, but breaks this
support in such a fashion that using it worse than not. This is <A
HREF="solaris.xtra.4095849"> SUN Bug ID 4095849</A>, and it is not yet
fixed as of June 1998.
<P>
<H3>Solaris 2.5 and 2.5.1</H3>
<P>
On UltraSPARC systems, calculation of <I>cpu_tick_freq</I> is broken
such that values that are off by significant amounts may be used
instead. This unfortunately means that ntpd may have severe problems
keeping synchronization. This is <A HREF="solaris.xtra.4023118"> SUN Bug ID
4023118</A>. Bryan Cantrill <! -- <bmc@eng.sun.com> --> of Sun
posted <A HREF="solaris.xtra.patchfreq">patchfreq</A>, a workaround script,
to comp.protocols.time.ntp in March of 1997.
<P>
<HR>
<H2>OLD DATA</H2>
<STRONG>I can't vouch for the accuracy the information below this
rule. It may be significantly dated or incorrect.</STRONG>
<P>
<P>
<H3>Solaris 2.2</H3>
<P>
Solaris 2.2 and later contain completely re-written clock code to
provide high resolution microsecond timers. A benefit of the
re-written clock code is that adjtime does not round off its
adjustments, so ntp does not have to compensate for this
rounding. Under Solaris 2.2 and later, ntp #define's
<CODE>ADJTIME_IS_ACCURATE</CODE>, and does not look for the <I>tickadj</I>
kernel variable.
<P>
<H3>Solaris 2.1</H3>
(This originally written by William L. Jones <jones@chpc.utexas.edu>)
<P>
Solaris 2.1 contains fairly traditional clock code, with <I>tick</I>
and <I>tickadj</I>.
<P>
Since settimeofday under Solaris 2.1 only sets the seconds part of timeval
care must be used in starting xntpd. I suggest the following start
up script:
<BLOCKQUOTE><TT>
tickadj -s -a 1000
<BR>ntpdate -v server1 server2
<BR>sleep 20
<BR>ntpdate -v server1 server2
<BR>sleep 20
<BR>tickadj -a 200
<BR>xntpd
</TT></BLOCKQUOTE>
The first tickadj turns of the time of day clock and sets the tick
adjust value to 1 millisecond. This will insure that an adjtime value
of at most 2 seconds will complete in 20 seconds.
<P>
The first ntpdate will set the time to within two seconds
using settimeofday or it will adjust time using adjtime.
<P>
The first sleep insures the adjtime has completed for the first ntpdate.
<P>
The second ntpdate will use adjtime to set the time of day since the
clock should be within 2 seconds of the correct time.
<P>
The second tickadj set the tick adjust system value to 5 microseconds.
<P>
The second sleeps insure that adjtime will complete before starting
the next xntpd.
<P>
I tried running with a tickadj of 5 microseconds with out much success.
200 microseconds seems to work well.
<P>
<HR>
Prior versions of this file had major text contributed by:
<MENU>
<LI>Denny Gentry <denny@eng.sun.com>
</MENU>
<BODY>
</HTML>