/** @file
Simple Text Input Ex protocol from the UEFI 2.0 specification.
This protocol defines an extension to the EFI_SIMPLE_TEXT_INPUT_PROTOCOL
which exposes much more state and modifier information from the input device,
also allows one to register a notification for a particular keystroke.
Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.<BR>
SPDX-License-Identifier: BSD-2-Clause-Patent
**/
#ifndef __SIMPLE_TEXT_IN_EX_H__
#define __SIMPLE_TEXT_IN_EX_H__
#include <Protocol/SimpleTextIn.h>
#define EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL_GUID \
{0xdd9e7534, 0x7762, 0x4698, { 0x8c, 0x14, 0xf5, 0x85, 0x17, 0xa6, 0x25, 0xaa } }
typedef struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL;
/**
The Reset() function resets the input device hardware. As part
of initialization process, the firmware/device will make a quick
but reasonable attempt to verify that the device is functioning.
If the ExtendedVerification flag is TRUE the firmware may take
an extended amount of time to verify the device is operating on
reset. Otherwise the reset operation is to occur as quickly as
possible. The hardware verification process is not defined by
this specification and is left up to the platform firmware or
driver to implement.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL instance.
@param ExtendedVerification Indicates that the driver may
perform a more exhaustive
verification operation of the
device during reset.
@retval EFI_SUCCESS The device was reset.
@retval EFI_DEVICE_ERROR The device is not functioning
correctly and could not be reset.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_INPUT_RESET_EX)(
IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN BOOLEAN ExtendedVerification
);
///
/// EFI_KEY_TOGGLE_STATE. The toggle states are defined.
/// They are: EFI_TOGGLE_STATE_VALID, EFI_SCROLL_LOCK_ACTIVE
/// EFI_NUM_LOCK_ACTIVE, EFI_CAPS_LOCK_ACTIVE
///
typedef UINT8 EFI_KEY_TOGGLE_STATE;
typedef struct _EFI_KEY_STATE {
///
/// Reflects the currently pressed shift
/// modifiers for the input device. The
/// returned value is valid only if the high
/// order bit has been set.
///
UINT32 KeyShiftState;
///
/// Reflects the current internal state of
/// various toggled attributes. The returned
/// value is valid only if the high order
/// bit has been set.
///
EFI_KEY_TOGGLE_STATE KeyToggleState;
} EFI_KEY_STATE;
typedef struct {
///
/// The EFI scan code and Unicode value returned from the input device.
///
EFI_INPUT_KEY Key;
///
/// The current state of various toggled attributes as well as input modifier values.
///
EFI_KEY_STATE KeyState;
} EFI_KEY_DATA;
//
// Any Shift or Toggle State that is valid should have
// high order bit set.
//
// Shift state
//
#define EFI_SHIFT_STATE_VALID 0x80000000
#define EFI_RIGHT_SHIFT_PRESSED 0x00000001
#define EFI_LEFT_SHIFT_PRESSED 0x00000002
#define EFI_RIGHT_CONTROL_PRESSED 0x00000004
#define EFI_LEFT_CONTROL_PRESSED 0x00000008
#define EFI_RIGHT_ALT_PRESSED 0x00000010
#define EFI_LEFT_ALT_PRESSED 0x00000020
#define EFI_RIGHT_LOGO_PRESSED 0x00000040
#define EFI_LEFT_LOGO_PRESSED 0x00000080
#define EFI_MENU_KEY_PRESSED 0x00000100
#define EFI_SYS_REQ_PRESSED 0x00000200
//
// Toggle state
//
#define EFI_TOGGLE_STATE_VALID 0x80
#define EFI_KEY_STATE_EXPOSED 0x40
#define EFI_SCROLL_LOCK_ACTIVE 0x01
#define EFI_NUM_LOCK_ACTIVE 0x02
#define EFI_CAPS_LOCK_ACTIVE 0x04
//
// EFI Scan codes
//
#define SCAN_F11 0x0015
#define SCAN_F12 0x0016
#define SCAN_PAUSE 0x0048
#define SCAN_F13 0x0068
#define SCAN_F14 0x0069
#define SCAN_F15 0x006A
#define SCAN_F16 0x006B
#define SCAN_F17 0x006C
#define SCAN_F18 0x006D
#define SCAN_F19 0x006E
#define SCAN_F20 0x006F
#define SCAN_F21 0x0070
#define SCAN_F22 0x0071
#define SCAN_F23 0x0072
#define SCAN_F24 0x0073
#define SCAN_MUTE 0x007F
#define SCAN_VOLUME_UP 0x0080
#define SCAN_VOLUME_DOWN 0x0081
#define SCAN_BRIGHTNESS_UP 0x0100
#define SCAN_BRIGHTNESS_DOWN 0x0101
#define SCAN_SUSPEND 0x0102
#define SCAN_HIBERNATE 0x0103
#define SCAN_TOGGLE_DISPLAY 0x0104
#define SCAN_RECOVERY 0x0105
#define SCAN_EJECT 0x0106
/**
The function reads the next keystroke from the input device. If
there is no pending keystroke the function returns
EFI_NOT_READY. If there is a pending keystroke, then
KeyData.Key.ScanCode is the EFI scan code defined in Error!
Reference source not found. The KeyData.Key.UnicodeChar is the
actual printable character or is zero if the key does not
represent a printable character (control key, function key,
etc.). The KeyData.KeyState is shift state for the character
reflected in KeyData.Key.UnicodeChar or KeyData.Key.ScanCode .
When interpreting the data from this function, it should be
noted that if a class of printable characters that are
normally adjusted by shift modifiers (e.g. Shift Key + "f"
key) would be presented solely as a KeyData.Key.UnicodeChar
without the associated shift state. So in the previous example
of a Shift Key + "f" key being pressed, the only pertinent
data returned would be KeyData.Key.UnicodeChar with the value
of "F". This of course would not typically be the case for
non-printable characters such as the pressing of the Right
Shift Key + F10 key since the corresponding returned data
would be reflected both in the KeyData.KeyState.KeyShiftState
and KeyData.Key.ScanCode values. UEFI drivers which implement
the EFI_SIMPLE_TEXT_INPUT_EX protocol are required to return
KeyData.Key and KeyData.KeyState values. These drivers must
always return the most current state of
KeyData.KeyState.KeyShiftState and
KeyData.KeyState.KeyToggleState. It should also be noted that
certain input devices may not be able to produce shift or toggle
state information, and in those cases the high order bit in the
respective Toggle and Shift state fields should not be active.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL instance.
@param KeyData A pointer to a buffer that is filled in with
the keystroke state data for the key that was
pressed.
@retval EFI_SUCCESS The keystroke information was returned.
@retval EFI_NOT_READY There was no keystroke data available.
@retval EFI_DEVICE_ERROR The keystroke information was not returned due to
hardware errors.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_INPUT_READ_KEY_EX)(
IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
OUT EFI_KEY_DATA *KeyData
);
/**
The SetState() function allows the input device hardware to
have state settings adjusted.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL instance.
@param KeyToggleState Pointer to the EFI_KEY_TOGGLE_STATE to
set the state for the input device.
@retval EFI_SUCCESS The device state was set appropriately.
@retval EFI_DEVICE_ERROR The device is not functioning
correctly and could not have the
setting adjusted.
@retval EFI_UNSUPPORTED The device does not support the
ability to have its state set.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_SET_STATE)(
IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN EFI_KEY_TOGGLE_STATE *KeyToggleState
);
///
/// The function will be called when the key sequence is typed specified by KeyData.
///
typedef
EFI_STATUS
(EFIAPI *EFI_KEY_NOTIFY_FUNCTION)(
IN EFI_KEY_DATA *KeyData
);
/**
The RegisterKeystrokeNotify() function registers a function
which will be called when a specified keystroke will occur.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL instance.
@param KeyData A pointer to a buffer that is filled in with
the keystroke information for the key that was
pressed. If KeyData.Key, KeyData.KeyState.KeyToggleState
and KeyData.KeyState.KeyShiftState are 0, then any incomplete
keystroke will trigger a notification of the KeyNotificationFunction.
@param KeyNotificationFunction Points to the function to be called when the key sequence
is typed specified by KeyData. This notification function
should be called at <=TPL_CALLBACK.
@param NotifyHandle Points to the unique handle assigned to
the registered notification.
@retval EFI_SUCCESS Key notify was registered successfully.
@retval EFI_OUT_OF_RESOURCES Unable to allocate necessary
data structures.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_REGISTER_KEYSTROKE_NOTIFY)(
IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN EFI_KEY_DATA *KeyData,
IN EFI_KEY_NOTIFY_FUNCTION KeyNotificationFunction,
OUT VOID **NotifyHandle
);
/**
The UnregisterKeystrokeNotify() function removes the
notification which was previously registered.
@param This A pointer to the EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL instance.
@param NotificationHandle The handle of the notification
function being unregistered.
@retval EFI_SUCCESS Key notify was unregistered successfully.
@retval EFI_INVALID_PARAMETER The NotificationHandle is
invalid.
**/
typedef
EFI_STATUS
(EFIAPI *EFI_UNREGISTER_KEYSTROKE_NOTIFY)(
IN EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL *This,
IN VOID *NotificationHandle
);
///
/// The EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL is used on the ConsoleIn
/// device. It is an extension to the Simple Text Input protocol
/// which allows a variety of extended shift state information to be
/// returned.
///
struct _EFI_SIMPLE_TEXT_INPUT_EX_PROTOCOL{
EFI_INPUT_RESET_EX Reset;
EFI_INPUT_READ_KEY_EX ReadKeyStrokeEx;
///
/// Event to use with WaitForEvent() to wait for a key to be available.
///
EFI_EVENT WaitForKeyEx;
EFI_SET_STATE SetState;
EFI_REGISTER_KEYSTROKE_NOTIFY RegisterKeyNotify;
EFI_UNREGISTER_KEYSTROKE_NOTIFY UnregisterKeyNotify;
};
extern EFI_GUID gEfiSimpleTextInputExProtocolGuid;
#endif