// SPDX-License-Identifier: GPL-2.0+
//
// Copyright 2013 Freescale Semiconductor, Inc.
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
#include "imx25.dtsi"
/ {
model = "Freescale i.MX25 Product Development Kit";
compatible = "fsl,imx25-pdk", "fsl,imx25";
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x4000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_fec_3v3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "fec-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 3 0>;
enable-active-high;
};
reg_2p5v: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3p3v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can_3v3: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "can-3v3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio4 6 0>;
};
};
sound {
compatible = "fsl,imx25-pdk-sgtl5000",
"fsl,imx-audio-sgtl5000";
model = "imx25-pdk-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
wvga: display {
model = "CLAA057VC01CW";
bits-per-pixel = <16>;
fsl,pcr = <0xfa208b80>;
bus-width = <18>;
display-timings {
native-mode = <&wvga_timings>;
wvga_timings: 640x480 {
hactive = <640>;
vactive = <480>;
hback-porch = <45>;
hfront-porch = <114>;
hsync-len = <1>;
vback-porch = <33>;
vfront-porch = <11>;
vsync-len = <1>;
clock-frequency = <25200000>;
};
};
};
};
&audmux {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_audmux>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can1>;
xceiver-supply = <®_can_3v3>;
status = "okay";
};
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
wp-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&fec {
phy-mode = "rmii";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec>;
phy-supply = <®_fec_3v3>;
phy-reset-gpios = <&gpio4 8 GPIO_ACTIVE_LOW>;
status = "okay";
};
&i2c1 {
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
status = "okay";
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 129>;
VDDA-supply = <®_2p5v>;
VDDIO-supply = <®_3p3v>;
};
};
&iomuxc {
imx25-pdk {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX25_PAD_RW__AUD4_TXFS 0xe0
MX25_PAD_OE__AUD4_TXC 0xe0
MX25_PAD_EB0__AUD4_TXD 0xe0
MX25_PAD_EB1__AUD4_RXD 0xe0
>;
};
pinctrl_can1: can1grp {
fsl,pins = <
MX25_PAD_GPIO_A__CAN1_TX 0x0
MX25_PAD_GPIO_B__CAN1_RX 0x0
MX25_PAD_D14__GPIO_4_6 0x80000000
>;
};
pinctrl_esdhc1: esdhc1grp {
fsl,pins = <
MX25_PAD_SD1_CMD__ESDHC1_CMD 0x80000000
MX25_PAD_SD1_CLK__ESDHC1_CLK 0x80000000
MX25_PAD_SD1_DATA0__ESDHC1_DAT0 0x80000000
MX25_PAD_SD1_DATA1__ESDHC1_DAT1 0x80000000
MX25_PAD_SD1_DATA2__ESDHC1_DAT2 0x80000000
MX25_PAD_SD1_DATA3__ESDHC1_DAT3 0x80000000
MX25_PAD_A14__GPIO_2_0 0x80000000
MX25_PAD_A15__GPIO_2_1 0x80000000
>;
};
pinctrl_fec: fecgrp {
fsl,pins = <
MX25_PAD_FEC_MDC__FEC_MDC 0x80000000
MX25_PAD_FEC_MDIO__FEC_MDIO 0x400001e0
MX25_PAD_FEC_TDATA0__FEC_TDATA0 0x80000000
MX25_PAD_FEC_TDATA1__FEC_TDATA1 0x80000000
MX25_PAD_FEC_TX_EN__FEC_TX_EN 0x80000000
MX25_PAD_FEC_RDATA0__FEC_RDATA0 0x80000000
MX25_PAD_FEC_RDATA1__FEC_RDATA1 0x80000000
MX25_PAD_FEC_RX_DV__FEC_RX_DV 0x80000000
MX25_PAD_FEC_TX_CLK__FEC_TX_CLK 0x1c0
MX25_PAD_A17__GPIO_2_3 0x80000000
MX25_PAD_D12__GPIO_4_8 0x80000000
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX25_PAD_I2C1_CLK__I2C1_CLK 0x80000000
MX25_PAD_I2C1_DAT__I2C1_DAT 0x80000000
>;
};
pinctrl_kpp: kppgrp {
fsl,pins = <
MX25_PAD_KPP_ROW0__KPP_ROW0 0x80000000
MX25_PAD_KPP_ROW1__KPP_ROW1 0x80000000
MX25_PAD_KPP_ROW2__KPP_ROW2 0x80000000
MX25_PAD_KPP_ROW3__KPP_ROW3 0x80000000
MX25_PAD_KPP_COL0__KPP_COL0 0x80000000
MX25_PAD_KPP_COL1__KPP_COL1 0x80000000
MX25_PAD_KPP_COL2__KPP_COL2 0x80000000
MX25_PAD_KPP_COL3__KPP_COL3 0x80000000
>;
};
pinctrl_lcd: lcdgrp {
fsl,pins = <
MX25_PAD_LD0__LD0 0xe0
MX25_PAD_LD1__LD1 0xe0
MX25_PAD_LD2__LD2 0xe0
MX25_PAD_LD3__LD3 0xe0
MX25_PAD_LD4__LD4 0xe0
MX25_PAD_LD5__LD5 0xe0
MX25_PAD_LD6__LD6 0xe0
MX25_PAD_LD7__LD7 0xe0
MX25_PAD_LD8__LD8 0xe0
MX25_PAD_LD9__LD9 0xe0
MX25_PAD_LD10__LD10 0xe0
MX25_PAD_LD11__LD11 0xe0
MX25_PAD_LD12__LD12 0xe0
MX25_PAD_LD13__LD13 0xe0
MX25_PAD_LD14__LD14 0xe0
MX25_PAD_LD15__LD15 0xe0
MX25_PAD_GPIO_E__LD16 0xe0
MX25_PAD_GPIO_F__LD17 0xe0
MX25_PAD_HSYNC__HSYNC 0xe0
MX25_PAD_VSYNC__VSYNC 0xe0
MX25_PAD_LSCLK__LSCLK 0xe0
MX25_PAD_OE_ACD__OE_ACD 0xe0
MX25_PAD_CONTRAST__CONTRAST 0xe0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX25_PAD_UART1_RTS__UART1_RTS 0xe0
MX25_PAD_UART1_CTS__UART1_CTS 0xe0
MX25_PAD_UART1_TXD__UART1_TXD 0x80000000
MX25_PAD_UART1_RXD__UART1_RXD 0xc0
>;
};
};
};
&lcdc {
display = <&wvga>;
fsl,lpccr = <0x00a903ff>;
fsl,lscr1 = <0x00120300>;
fsl,dmacr = <0x00020010>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd>;
status = "okay";
};
&nfc {
nand-on-flash-bbt;
status = "okay";
};
&kpp {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_kpp>;
linux,keymap = <
MATRIX_KEY(0x0, 0x0, KEY_UP)
MATRIX_KEY(0x0, 0x1, KEY_DOWN)
MATRIX_KEY(0x0, 0x2, KEY_VOLUMEDOWN)
MATRIX_KEY(0x0, 0x3, KEY_HOME)
MATRIX_KEY(0x1, 0x0, KEY_RIGHT)
MATRIX_KEY(0x1, 0x1, KEY_LEFT)
MATRIX_KEY(0x1, 0x2, KEY_ENTER)
MATRIX_KEY(0x1, 0x3, KEY_VOLUMEUP)
MATRIX_KEY(0x2, 0x0, KEY_F6)
MATRIX_KEY(0x2, 0x1, KEY_F8)
MATRIX_KEY(0x2, 0x2, KEY_F9)
MATRIX_KEY(0x2, 0x3, KEY_F10)
MATRIX_KEY(0x3, 0x0, KEY_F1)
MATRIX_KEY(0x3, 0x1, KEY_F2)
MATRIX_KEY(0x3, 0x2, KEY_F3)
MATRIX_KEY(0x3, 0x2, KEY_POWER)
>;
status = "okay";
};
&ssi1 {
status = "okay";
};
&tsc {
status = "okay";
};
&tscadc {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
uart-has-rtscts;
status = "okay";
};
&usbhost1 {
status = "okay";
};
&usbotg {
external-vbus-divider;
status = "okay";
};