#!/usr/bin/env perl
#
# Copyright (c) 2005, 2006 Marcel Moolenaar
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions
# are met:
#
# 1. Redistributions of source code must retain the above copyright
# notice, this list of conditions and the following disclaimer.
# 2. Redistributions in binary form must reproduce the above copyright
# notice, this list of conditions and the following disclaimer in the
# documentation and/or other materials provided with the distribution.
#
# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
# IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
# NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
# THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
#
# $FreeBSD$
use strict;
use warnings;
use File::Basename;
my $disk = "/tmp/disk-$$";
my $mntpt_prefix = "/tmp/mount-$$";
my %steps = (
"000" => "gctl class=PART",
"001" => "gctl class=PART verb=bogus",
"010" => "gctl class=PART verb=create",
"011" => "gctl class=PART verb=create provider=bogus",
"020" => "mdcfg create pristine",
"021" => "gctl class=PART verb=create provider=%dev% entries=-1",
"022" => "gctl class=PART verb=create provider=%dev% entries=128",
"023" => "gctl class=PART verb=create provider=%dev%",
"024" => "gctl class=PART verb=modify geom=%dev%",
"025" => "conf",
"030" => "gctl class=PART verb=add",
"031" => "gctl class=PART verb=add geom=bogus",
"032" => "gctl class=PART verb=add geom=%dev%",
"033" => "gctl class=PART verb=add geom=%dev% type=bogus",
"034" => "gctl class=PART verb=add geom=%dev% type=ed0101b0-2a71-11da-ba81-003048416ace",
"035" => "gctl class=PART verb=add geom=%dev% type=ed0101b0-2a71-11da-ba81-003048416ace start=1",
"036" => "gctl class=PART verb=add geom=%dev% type=ed0101b0-2a71-11da-ba81-003048416ace start=34",
"037" => "gctl class=PART verb=add geom=%dev% type=ed0101b0-2a71-11da-ba81-003048416ace start=34 end=12345678",
"038" => "gctl class=PART verb=add geom=%dev% type=ed0101b0-2a71-11da-ba81-003048416ace start=162 end=417 entry=129",
"039" => "gctl class=PART verb=add geom=%dev% type=ed0101b0-2a71-11da-ba81-003048416ace start=162 end=417 entry:8=5",
"040" => "gctl class=PART verb=add geom=%dev% type=83d34ed5-c4ff-11da-b65b-000347c5d7f3 start=34 end=161 entry=5",
"041" => "gctl class=PART verb=add geom=%dev% type=83d34ed5-c4ff-11da-b65b-000347c5d7f3 start=34 end=546",
"042" => "gctl class=PART verb=add geom=%dev% type=83d34ed5-c4ff-11da-b65b-000347c5d7f3 start=162 end=417",
"043" => "gctl class=PART verb=add geom=%dev% type=83d34ed5-c4ff-11da-b65b-000347c5d7f3 start=100 end=300",
"044" => "gctl class=PART verb=add geom=%dev% type=83d34ed5-c4ff-11da-b65b-000347c5d7f3 start=300 end=500",
"045" => "gctl class=PART verb=add geom=%dev% type=83d34ed5-c4ff-11da-b65b-000347c5d7f3 start=34 end=161 entry:8",
"046" => "gctl class=PART verb=add geom=%dev% type=d2bd4509-c4ff-11da-b4cc-00306e39b62f start=418 end=546 entry:8",
"047" => "conf",
"050" => "gctl class=PART verb=remove geom=%dev% entry=5",
"051" => "gctl class=PART verb=remove geom=%dev% entry=2",
"052" => "gctl class=PART verb=remove geom=%dev% entry=1",
"053" => "gctl class=PART verb=remove geom=%dev% entry=1",
"054" => "conf",
"060" => "gctl class=PART verb=add geom=%dev% type=516e7cb6-6ecf-11d6-8ff8-00022d09712b start=34 end=546 entry:8=1",
"061" => "mount %dev%p1",
"062" => "gctl class=PART verb=delete geom=%dev% entry=1",
"063" => "umount %dev%p1",
"064" => "gctl class=PART verb=delete geom=%dev% entry=1",
"065" => "conf",
"100" => "mdcfg destroy",
"110" => "mdcfg create corrupted",
"111" => "gctl class=PART verb=add geom=%dev%",
"120" => "mdcfg destroy",
);
my %result = (
"000" => "FAIL Verb missing",
"001" => "FAIL 22 verb 'bogus'",
"010" => "FAIL 87 provider",
"011" => "FAIL 22 provider 'bogus'",
"020" => "",
"021" => "FAIL 22 entries -1",
"022" => "PASS",
"023" => "FAIL 17 geom '%dev%'",
"024" => "FAIL 87 entry",
"025" => "b1856477950e5786898c8f01361196cf",
"030" => "FAIL 87 geom",
"031" => "FAIL 22 geom 'bogus'",
"032" => "FAIL 87 type",
"033" => "FAIL 22 type 'bogus'",
"034" => "FAIL 87 start",
"035" => "FAIL 22 start 1",
"036" => "FAIL 87 end",
"037" => "FAIL 22 end 12345678",
"038" => "FAIL 22 entry 129",
"039" => "PASS entry=5",
"040" => "FAIL 17 entry 5",
"041" => "FAIL 28 start/end 34/546",
"042" => "FAIL 28 start/end 162/417",
"043" => "FAIL 28 start/end 100/300",
"044" => "FAIL 28 start/end 300/500",
"045" => "PASS entry=1",
"046" => "PASS entry=2",
"047" => "50783a39eecfc62a29db24381e12b9d8",
"050" => "PASS",
"051" => "PASS",
"052" => "PASS",
"053" => "FAIL 2 entry 1",
"054" => "b1856477950e5786898c8f01361196cf",
"060" => "PASS",
"061" => "PASS",
"062" => "FAIL 16",
"063" => "PASS",
"064" => "PASS",
"065" => "b1856477950e5786898c8f01361196cf",
"100" => "",
"110" => "",
"111" => "FAIL 6 geom '%dev%'",
"120" => "",
);
my $verbose = "";
if (exists $ENV{'TEST_VERBOSE'}) {
$verbose = "-v";
}
# Compile the driver...
my $st = system("make obj && make all");
if ($st != 0) {
print "1..0 # SKIP error compiling test.c\n";
exit 0;
}
chomp(my $cmd = `make '-V\${.OBJDIR}/\${PROG}'`);
my $out = basename($cmd) . ".out";
# Make sure we have permission to use gctl...
if (`$cmd` =~ "^FAIL Permission denied") {
print "1..0 # SKIP insufficient permissions\n";
exit 0;
}
my $debugflags_oid = 'kern.geom.debugflags';
chomp(my $old_geom_debugflags = `sysctl -n $debugflags_oid`);
if ($? != 0) {
print "1..0 # SKIP could not query $debugflags_oid\n";
exit 0;
}
if (system("sysctl $debugflags_oid=0") != 0) {
print "1..0 # SKIP could not set $debugflags_oid=0\n";
exit 0;
}
my $count = keys (%steps);
print "1..$count\n";
my $nr = 1;
my $dev = "n/a";
foreach my $key (sort keys %steps) {
my ($action, $args) = split(/ /, $steps{$key}, 2);
my $res = $result{$key};
$args = "" if (not defined $args);
$args =~ s/%dev%/$dev/g;
$res =~ s/%dev%/$dev/g;
if ($action =~ "^gctl") {
my $errmsg = "";
system("$cmd $verbose $args | tee $out 2>&1");
chomp($st = `tail -1 $out`);
if ($st ne $res) {
$errmsg = "\"$st\" (actual) != \"$res\" (expected)\n";
}
printf("%sok $nr \# gctl($key)%s\n",
($errmsg eq "" ? "" : "not "),
($errmsg eq "" ? "" : " - $errmsg"));
unlink $out;
} elsif ($action =~ "^mdcfg") {
my $errmsg = "";
if ($args =~ "^create") {
# NOTE: `count=1024` affects $key => {"025" "054", "065"}.
if (system("dd if=/dev/zero of=$disk count=1024 2>&1") == 0) {
chomp($dev = `mdconfig -a -t vnode -f $disk`);
if ($? == 0) {
if (system("gpart create -s GPT $dev") != 0) {
$errmsg = "gpart create failed";
}
} else {
$errmsg = "mdconfig -a failed";
}
} else {
$errmsg = "dd failed";
}
} elsif ($args =~ "^destroy") {
$dev =~ s/md/-u /g;
if (system("mdconfig -d $dev") != 0) {
$errmsg = "mdconfig -d failed";
}
unlink $disk;
$dev = "n/a";
}
printf("%sok $nr # mdcfg($key)%s\n",
($errmsg eq "" ? "" : "not "),
($errmsg eq "" ? "" : " - $errmsg"));
} elsif ($action =~ "^conf") {
system("sysctl -b kern.geom.conftxt | grep -a $dev | sed -e s:$disk:DISK:g -e s:$dev:DEV:g | sort | md5 -p | tee $out 2>&1");
$st = `tail -1 $out`;
if ($st =~ "^$res") {
print "ok $nr \# conf($key)\n";
} else {
print "not ok $nr \# conf($key) - $st\n";
}
unlink $out;
} elsif ($action =~ "^mount") {
my $errmsg = "";
mkdir("$mntpt_prefix-$args");
if (system("newfs /dev/$args") == 0) {
if (system("mount /dev/$args $mntpt_prefix-$args") != 0) {
$errmsg = "mount failed";
}
} else {
$errmsg = "newfs failed";
}
printf("%sok $nr # mount($key)%s\n",
($errmsg eq "" ? "" : "not "),
($errmsg eq "" ? "" : " - $errmsg"));
} elsif ($action =~ "^umount") {
system("umount $mntpt_prefix-$args");
system("rmdir $mntpt_prefix-$args");
print "ok $nr \# umount($key)\n";
}
$nr += 1;
}
END {
system("sysctl $debugflags_oid=$old_geom_debugflags");
unlink($cmd);
}