// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Linux/PA-RISC Project (http://www.parisc-linux.org/)
*
* Floating-point emulation code
* Copyright (C) 2001 Hewlett-Packard (Paul Bame) <bame@debian.org>
*/
/*
* BEGIN_DESC
*
* File:
* @(#) pa/fp/decode_exc.c $ Revision: $
*
* Purpose:
* <<please update with a synopsis of the functionality provided by this file>>
*
* External Interfaces:
* <<the following list was autogenerated, please review>>
* decode_fpu(Fpu_register, trap_counts)
*
* Internal Interfaces:
* <<please update>>
*
* Theory:
* <<please update with a overview of the operation of this file>>
*
* END_DESC
*/
#include <linux/kernel.h>
#include "float.h"
#include "sgl_float.h"
#include "dbl_float.h"
#include "cnv_float.h"
/* #include "types.h" */
#include <asm/signal.h>
#include <asm/siginfo.h>
/* #include <machine/sys/mdep_private.h> */
#undef Fpustatus_register
#define Fpustatus_register Fpu_register[0]
/* General definitions */
#define DOESTRAP 1
#define NOTRAP 0
#define SIGNALCODE(signal, code) ((signal) << 24 | (code))
#define copropbit 1<<31-2 /* bit position 2 */
#define opclass 9 /* bits 21 & 22 */
#define fmt 11 /* bits 19 & 20 */
#define df 13 /* bits 17 & 18 */
#define twobits 3 /* mask low-order 2 bits */
#define fivebits 31 /* mask low-order 5 bits */
#define MAX_EXCP_REG 7 /* number of excpeption registers to check */
/* Exception register definitions */
#define Excp_type(index) Exceptiontype(Fpu_register[index])
#define Excp_instr(index) Instructionfield(Fpu_register[index])
#define Clear_excp_register(index) Allexception(Fpu_register[index]) = 0
#define Excp_format() \
(current_ir >> ((current_ir>>opclass & twobits)==1 ? df : fmt) & twobits)
/* Miscellaneous definitions */
#define Fpu_sgl(index) Fpu_register[index*2]
#define Fpu_dblp1(index) Fpu_register[index*2]
#define Fpu_dblp2(index) Fpu_register[(index*2)+1]
#define Fpu_quadp1(index) Fpu_register[index*2]
#define Fpu_quadp2(index) Fpu_register[(index*2)+1]
#define Fpu_quadp3(index) Fpu_register[(index*2)+2]
#define Fpu_quadp4(index) Fpu_register[(index*2)+3]
/* Single precision floating-point definitions */
#ifndef Sgl_decrement
# define Sgl_decrement(sgl_value) Sall(sgl_value)--
#endif
/* Double precision floating-point definitions */
#ifndef Dbl_decrement
# define Dbl_decrement(dbl_valuep1,dbl_valuep2) \
if ((Dallp2(dbl_valuep2)--) == 0) Dallp1(dbl_valuep1)--
#endif
#define update_trap_counts(Fpu_register, aflags, bflags, trap_counts) { \
aflags=(Fpu_register[0])>>27; /* assumes zero fill. 32 bit */ \
Fpu_register[0] |= bflags; \
}
u_int
decode_fpu(unsigned int Fpu_register[], unsigned int trap_counts[])
{
unsigned int current_ir, excp;
int target, exception_index = 1;
boolean inexact;
unsigned int aflags;
unsigned int bflags;
unsigned int excptype;
/* Keep stats on how many floating point exceptions (based on type)
* that happen. Want to keep this overhead low, but still provide
* some information to the customer. All exits from this routine
* need to restore Fpu_register[0]
*/
bflags=(Fpu_register[0] & 0xf8000000);
Fpu_register[0] &= 0x07ffffff;
/* exception_index is used to index the exception register queue. It
* always points at the last register that contains a valid exception. A
* zero value implies no exceptions (also the initialized value). Setting
* the T-bit resets the exception_index to zero.
*/
/*
* Check for reserved-op exception. A reserved-op exception does not
* set any exception registers nor does it set the T-bit. If the T-bit
* is not set then a reserved-op exception occurred.
*
* At some point, we may want to report reserved op exceptions as
* illegal instructions.
*/
if (!Is_tbit_set()) {
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
return SIGNALCODE(SIGILL, ILL_COPROC);
}
/*
* Is a coprocessor op.
*
* Now we need to determine what type of exception occurred.
*/
for (exception_index=1; exception_index<=MAX_EXCP_REG; exception_index++) {
current_ir = Excp_instr(exception_index);
/*
* On PA89: there are 5 different unimplemented exception
* codes: 0x1, 0x9, 0xb, 0x3, and 0x23. PA-RISC 2.0 adds
* another, 0x2b. Only these have the low order bit set.
*/
excptype = Excp_type(exception_index);
if (excptype & UNIMPLEMENTEDEXCEPTION) {
/*
* Clear T-bit and exception register so that
* we can tell if a trap really occurs while
* emulating the instruction.
*/
Clear_tbit();
Clear_excp_register(exception_index);
/*
* Now emulate this instruction. If a trap occurs,
* fpudispatch will return a non-zero number
*/
excp = fpudispatch(current_ir,excptype,0,Fpu_register);
/* accumulate the status flags, don't lose them as in hpux */
if (excp) {
/*
* We now need to make sure that the T-bit and the
* exception register contain the correct values
* before continuing.
*/
/*
* Set t-bit since it might still be needed for a
* subsequent real trap (I don't understand fully -PB)
*/
Set_tbit();
/* some of the following code uses
* Excp_type(exception_index) so fix that up */
Set_exceptiontype_and_instr_field(excp,current_ir,
Fpu_register[exception_index]);
if (excp == UNIMPLEMENTEDEXCEPTION) {
/*
* it is really unimplemented, so restore the
* TIMEX extended unimplemented exception code
*/
excp = excptype;
update_trap_counts(Fpu_register, aflags, bflags,
trap_counts);
return SIGNALCODE(SIGILL, ILL_COPROC);
}
/* some of the following code uses excptype, so
* fix that up too */
excptype = excp;
}
/* handle exceptions other than the real UNIMPLIMENTED the
* same way as if the hardware had caused them */
if (excp == NOEXCEPTION)
/* For now use 'break', should technically be 'continue' */
break;
}
/*
* In PA89, the underflow exception has been extended to encode
* additional information. The exception looks like pp01x0,
* where x is 1 if inexact and pp represent the inexact bit (I)
* and the round away bit (RA)
*/
if (excptype & UNDERFLOWEXCEPTION) {
/* check for underflow trap enabled */
if (Is_underflowtrap_enabled()) {
update_trap_counts(Fpu_register, aflags, bflags,
trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTUND);
} else {
/*
* Isn't a real trap; we need to
* return the default value.
*/
target = current_ir & fivebits;
#ifndef lint
if (Ibit(Fpu_register[exception_index])) inexact = TRUE;
else inexact = FALSE;
#endif
switch (Excp_format()) {
case SGL:
/*
* If ra (round-away) is set, will
* want to undo the rounding done
* by the hardware.
*/
if (Rabit(Fpu_register[exception_index]))
Sgl_decrement(Fpu_sgl(target));
/* now denormalize */
sgl_denormalize(&Fpu_sgl(target),&inexact,Rounding_mode());
break;
case DBL:
/*
* If ra (round-away) is set, will
* want to undo the rounding done
* by the hardware.
*/
if (Rabit(Fpu_register[exception_index]))
Dbl_decrement(Fpu_dblp1(target),Fpu_dblp2(target));
/* now denormalize */
dbl_denormalize(&Fpu_dblp1(target),&Fpu_dblp2(target),
&inexact,Rounding_mode());
break;
}
if (inexact) Set_underflowflag();
/*
* Underflow can generate an inexact
* exception. If inexact trap is enabled,
* want to do an inexact trap, otherwise
* set inexact flag.
*/
if (inexact && Is_inexacttrap_enabled()) {
/*
* Set exception field of exception register
* to inexact, parm field to zero.
* Underflow bit should be cleared.
*/
Set_exceptiontype(Fpu_register[exception_index],
INEXACTEXCEPTION);
Set_parmfield(Fpu_register[exception_index],0);
update_trap_counts(Fpu_register, aflags, bflags,
trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTRES);
}
else {
/*
* Exception register needs to be cleared.
* Inexact flag needs to be set if inexact.
*/
Clear_excp_register(exception_index);
if (inexact) Set_inexactflag();
}
}
continue;
}
switch(Excp_type(exception_index)) {
case OVERFLOWEXCEPTION:
case OVERFLOWEXCEPTION | INEXACTEXCEPTION:
/* check for overflow trap enabled */
update_trap_counts(Fpu_register, aflags, bflags,
trap_counts);
if (Is_overflowtrap_enabled()) {
update_trap_counts(Fpu_register, aflags, bflags,
trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTOVF);
} else {
/*
* Isn't a real trap; we need to
* return the default value.
*/
target = current_ir & fivebits;
switch (Excp_format()) {
case SGL:
Sgl_setoverflow(Fpu_sgl(target));
break;
case DBL:
Dbl_setoverflow(Fpu_dblp1(target),Fpu_dblp2(target));
break;
}
Set_overflowflag();
/*
* Overflow always generates an inexact
* exception. If inexact trap is enabled,
* want to do an inexact trap, otherwise
* set inexact flag.
*/
if (Is_inexacttrap_enabled()) {
/*
* Set exception field of exception
* register to inexact. Overflow
* bit should be cleared.
*/
Set_exceptiontype(Fpu_register[exception_index],
INEXACTEXCEPTION);
update_trap_counts(Fpu_register, aflags, bflags,
trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTRES);
}
else {
/*
* Exception register needs to be cleared.
* Inexact flag needs to be set.
*/
Clear_excp_register(exception_index);
Set_inexactflag();
}
}
break;
case INVALIDEXCEPTION:
case OPC_2E_INVALIDEXCEPTION:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTINV);
case DIVISIONBYZEROEXCEPTION:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
Clear_excp_register(exception_index);
return SIGNALCODE(SIGFPE, FPE_FLTDIV);
case INEXACTEXCEPTION:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
return SIGNALCODE(SIGFPE, FPE_FLTRES);
default:
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
printk("%s(%d) Unknown FPU exception 0x%x\n", __FILE__,
__LINE__, Excp_type(exception_index));
return SIGNALCODE(SIGILL, ILL_COPROC);
case NOEXCEPTION: /* no exception */
/*
* Clear exception register in case
* other fields are non-zero.
*/
Clear_excp_register(exception_index);
break;
}
}
/*
* No real exceptions occurred.
*/
Clear_tbit();
update_trap_counts(Fpu_register, aflags, bflags, trap_counts);
return(NOTRAP);
}