Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
 * ASIX AX8817X based USB 2.0 Ethernet Devices
 * Copyright (C) 2003-2006 David Hollis <dhollis@davehollis.com>
 * Copyright (C) 2005 Phil Chang <pchang23@sbcglobal.net>
 * Copyright (C) 2006 James Painter <jamie.painter@iname.com>
 * Copyright (c) 2002-2003 TiVo Inc.
 */

#ifndef _ASIX_H
#define _ASIX_H

// #define	DEBUG			// error path messages, extra info
// #define	VERBOSE			// more; success messages

#include <linux/module.h>
#include <linux/kmod.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/workqueue.h>
#include <linux/mii.h>
#include <linux/usb.h>
#include <linux/crc32.h>
#include <linux/usb/usbnet.h>
#include <linux/slab.h>
#include <linux/if_vlan.h>

#define DRIVER_VERSION "22-Dec-2011"
#define DRIVER_NAME "asix"

/* ASIX AX8817X based USB 2.0 Ethernet Devices */

#define AX_CMD_SET_SW_MII		0x06
#define AX_CMD_READ_MII_REG		0x07
#define AX_CMD_WRITE_MII_REG		0x08
#define AX_CMD_STATMNGSTS_REG		0x09
#define AX_CMD_SET_HW_MII		0x0a
#define AX_CMD_READ_EEPROM		0x0b
#define AX_CMD_WRITE_EEPROM		0x0c
#define AX_CMD_WRITE_ENABLE		0x0d
#define AX_CMD_WRITE_DISABLE		0x0e
#define AX_CMD_READ_RX_CTL		0x0f
#define AX_CMD_WRITE_RX_CTL		0x10
#define AX_CMD_READ_IPG012		0x11
#define AX_CMD_WRITE_IPG0		0x12
#define AX_CMD_WRITE_IPG1		0x13
#define AX_CMD_READ_NODE_ID		0x13
#define AX_CMD_WRITE_NODE_ID		0x14
#define AX_CMD_WRITE_IPG2		0x14
#define AX_CMD_WRITE_MULTI_FILTER	0x16
#define AX88172_CMD_READ_NODE_ID	0x17
#define AX_CMD_READ_PHY_ID		0x19
#define AX_CMD_READ_MEDIUM_STATUS	0x1a
#define AX_CMD_WRITE_MEDIUM_MODE	0x1b
#define AX_CMD_READ_MONITOR_MODE	0x1c
#define AX_CMD_WRITE_MONITOR_MODE	0x1d
#define AX_CMD_READ_GPIOS		0x1e
#define AX_CMD_WRITE_GPIOS		0x1f
#define AX_CMD_SW_RESET			0x20
#define AX_CMD_SW_PHY_STATUS		0x21
#define AX_CMD_SW_PHY_SELECT		0x22
#define AX_QCTCTRL			0x2A

#define AX_CHIPCODE_MASK		0x70
#define AX_AX88772_CHIPCODE		0x00
#define AX_AX88772A_CHIPCODE		0x10
#define AX_AX88772B_CHIPCODE		0x20
#define AX_HOST_EN			0x01

#define AX_PHYSEL_PSEL			0x01
#define AX_PHYSEL_SSMII			0
#define AX_PHYSEL_SSEN			0x10

#define AX_PHY_SELECT_MASK		(BIT(3) | BIT(2))
#define AX_PHY_SELECT_INTERNAL		0
#define AX_PHY_SELECT_EXTERNAL		BIT(2)

#define AX_MONITOR_MODE			0x01
#define AX_MONITOR_LINK			0x02
#define AX_MONITOR_MAGIC		0x04
#define AX_MONITOR_HSFS			0x10

/* AX88172 Medium Status Register values */
#define AX88172_MEDIUM_FD		0x02
#define AX88172_MEDIUM_TX		0x04
#define AX88172_MEDIUM_FC		0x10
#define AX88172_MEDIUM_DEFAULT \
		( AX88172_MEDIUM_FD | AX88172_MEDIUM_TX | AX88172_MEDIUM_FC )

#define AX_MCAST_FILTER_SIZE		8
#define AX_MAX_MCAST			64

#define AX_SWRESET_CLEAR		0x00
#define AX_SWRESET_RR			0x01
#define AX_SWRESET_RT			0x02
#define AX_SWRESET_PRTE			0x04
#define AX_SWRESET_PRL			0x08
#define AX_SWRESET_BZ			0x10
#define AX_SWRESET_IPRL			0x20
#define AX_SWRESET_IPPD			0x40

#define AX88772_IPG0_DEFAULT		0x15
#define AX88772_IPG1_DEFAULT		0x0c
#define AX88772_IPG2_DEFAULT		0x12

/* AX88772 & AX88178 Medium Mode Register */
#define AX_MEDIUM_PF		0x0080
#define AX_MEDIUM_JFE		0x0040
#define AX_MEDIUM_TFC		0x0020
#define AX_MEDIUM_RFC		0x0010
#define AX_MEDIUM_ENCK		0x0008
#define AX_MEDIUM_AC		0x0004
#define AX_MEDIUM_FD		0x0002
#define AX_MEDIUM_GM		0x0001
#define AX_MEDIUM_SM		0x1000
#define AX_MEDIUM_SBP		0x0800
#define AX_MEDIUM_PS		0x0200
#define AX_MEDIUM_RE		0x0100

#define AX88178_MEDIUM_DEFAULT	\
	(AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \
	 AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \
	 AX_MEDIUM_RE)

#define AX88772_MEDIUM_DEFAULT	\
	(AX_MEDIUM_FD | AX_MEDIUM_RFC | \
	 AX_MEDIUM_TFC | AX_MEDIUM_PS | \
	 AX_MEDIUM_AC | AX_MEDIUM_RE)

/* AX88772 & AX88178 RX_CTL values */
#define AX_RX_CTL_SO		0x0080
#define AX_RX_CTL_AP		0x0020
#define AX_RX_CTL_AM		0x0010
#define AX_RX_CTL_AB		0x0008
#define AX_RX_CTL_SEP		0x0004
#define AX_RX_CTL_AMALL		0x0002
#define AX_RX_CTL_PRO		0x0001
#define AX_RX_CTL_MFB_2048	0x0000
#define AX_RX_CTL_MFB_4096	0x0100
#define AX_RX_CTL_MFB_8192	0x0200
#define AX_RX_CTL_MFB_16384	0x0300

#define AX_DEFAULT_RX_CTL	(AX_RX_CTL_SO | AX_RX_CTL_AB)

/* GPIO 0 .. 2 toggles */
#define AX_GPIO_GPO0EN		0x01	/* GPIO0 Output enable */
#define AX_GPIO_GPO_0		0x02	/* GPIO0 Output value */
#define AX_GPIO_GPO1EN		0x04	/* GPIO1 Output enable */
#define AX_GPIO_GPO_1		0x08	/* GPIO1 Output value */
#define AX_GPIO_GPO2EN		0x10	/* GPIO2 Output enable */
#define AX_GPIO_GPO_2		0x20	/* GPIO2 Output value */
#define AX_GPIO_RESERVED	0x40	/* Reserved */
#define AX_GPIO_RSE		0x80	/* Reload serial EEPROM */

#define AX_EEPROM_MAGIC		0xdeadbeef
#define AX_EEPROM_LEN		0x200

/* This structure cannot exceed sizeof(unsigned long [5]) AKA 20 bytes */
struct asix_data {
	u8 multi_filter[AX_MCAST_FILTER_SIZE];
	u8 mac_addr[ETH_ALEN];
	u8 phymode;
	u8 ledmode;
	u8 res;
};

struct asix_rx_fixup_info {
	struct sk_buff *ax_skb;
	u32 header;
	u16 remaining;
	bool split_head;
};

struct asix_common_private {
	void (*resume)(struct usbnet *dev);
	void (*suspend)(struct usbnet *dev);
	u16 presvd_phy_advertise;
	u16 presvd_phy_bmcr;
	struct asix_rx_fixup_info rx_fixup_info;
};

extern const struct driver_info ax88172a_info;

/* ASIX specific flags */
#define FLAG_EEPROM_MAC		(1UL << 0)  /* init device MAC from eeprom */

int asix_read_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
		  u16 size, void *data, int in_pm);

int asix_write_cmd(struct usbnet *dev, u8 cmd, u16 value, u16 index,
		   u16 size, void *data, int in_pm);

void asix_write_cmd_async(struct usbnet *dev, u8 cmd, u16 value,
			  u16 index, u16 size, void *data);

int asix_rx_fixup_internal(struct usbnet *dev, struct sk_buff *skb,
			   struct asix_rx_fixup_info *rx);
int asix_rx_fixup_common(struct usbnet *dev, struct sk_buff *skb);
void asix_rx_fixup_common_free(struct asix_common_private *dp);

struct sk_buff *asix_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
			      gfp_t flags);

int asix_set_sw_mii(struct usbnet *dev, int in_pm);
int asix_set_hw_mii(struct usbnet *dev, int in_pm);

int asix_read_phy_addr(struct usbnet *dev, int internal);
int asix_get_phy_addr(struct usbnet *dev);

int asix_sw_reset(struct usbnet *dev, u8 flags, int in_pm);

u16 asix_read_rx_ctl(struct usbnet *dev, int in_pm);
int asix_write_rx_ctl(struct usbnet *dev, u16 mode, int in_pm);

u16 asix_read_medium_status(struct usbnet *dev, int in_pm);
int asix_write_medium_mode(struct usbnet *dev, u16 mode, int in_pm);

int asix_write_gpio(struct usbnet *dev, u16 value, int sleep, int in_pm);

void asix_set_multicast(struct net_device *net);

int asix_mdio_read(struct net_device *netdev, int phy_id, int loc);
void asix_mdio_write(struct net_device *netdev, int phy_id, int loc, int val);

int asix_mdio_read_nopm(struct net_device *netdev, int phy_id, int loc);
void asix_mdio_write_nopm(struct net_device *netdev, int phy_id, int loc,
			  int val);

void asix_get_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);
int asix_set_wol(struct net_device *net, struct ethtool_wolinfo *wolinfo);

int asix_get_eeprom_len(struct net_device *net);
int asix_get_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
		    u8 *data);
int asix_set_eeprom(struct net_device *net, struct ethtool_eeprom *eeprom,
		    u8 *data);

void asix_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *info);

int asix_set_mac_address(struct net_device *net, void *p);

#endif /* _ASIX_H */