// SPDX-License-Identifier: GPL-2.0
/*
* USB Type-C Connector System Software Interface driver
*
* Copyright (C) 2017, Intel Corporation
* Author: Heikki Krogerus <heikki.krogerus@linux.intel.com>
*/
#include <linux/completion.h>
#include <linux/property.h>
#include <linux/device.h>
#include <linux/module.h>
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/usb/typec_dp.h>
#include "ucsi.h"
#include "trace.h"
#define to_ucsi_connector(_cap_) container_of(_cap_, struct ucsi_connector, \
typec_cap)
/*
* UCSI_TIMEOUT_MS - PPM communication timeout
*
* Ideally we could use MIN_TIME_TO_RESPOND_WITH_BUSY (which is defined in UCSI
* specification) here as reference, but unfortunately we can't. It is very
* difficult to estimate the time it takes for the system to process the command
* before it is actually passed to the PPM.
*/
#define UCSI_TIMEOUT_MS 5000
/*
* UCSI_SWAP_TIMEOUT_MS - Timeout for role swap requests
*
* 5 seconds is close to the time it takes for CapsCounter to reach 0, so even
* if the PPM does not generate Connector Change events before that with
* partners that do not support USB Power Delivery, this should still work.
*/
#define UCSI_SWAP_TIMEOUT_MS 5000
static inline int ucsi_sync(struct ucsi *ucsi)
{
if (ucsi->ppm && ucsi->ppm->sync)
return ucsi->ppm->sync(ucsi->ppm);
return 0;
}
static int ucsi_command(struct ucsi *ucsi, struct ucsi_control *ctrl)
{
int ret;
trace_ucsi_command(ctrl);
set_bit(COMMAND_PENDING, &ucsi->flags);
ret = ucsi->ppm->cmd(ucsi->ppm, ctrl);
if (ret)
goto err_clear_flag;
if (!wait_for_completion_timeout(&ucsi->complete,
msecs_to_jiffies(UCSI_TIMEOUT_MS))) {
dev_warn(ucsi->dev, "PPM NOT RESPONDING\n");
ret = -ETIMEDOUT;
}
err_clear_flag:
clear_bit(COMMAND_PENDING, &ucsi->flags);
return ret;
}
static int ucsi_ack(struct ucsi *ucsi, u8 ack)
{
struct ucsi_control ctrl;
int ret;
trace_ucsi_ack(ack);
set_bit(ACK_PENDING, &ucsi->flags);
UCSI_CMD_ACK(ctrl, ack);
ret = ucsi->ppm->cmd(ucsi->ppm, &ctrl);
if (ret)
goto out_clear_bit;
/* Waiting for ACK with ACK CMD, but not with EVENT for now */
if (ack == UCSI_ACK_EVENT)
goto out_clear_bit;
if (!wait_for_completion_timeout(&ucsi->complete,
msecs_to_jiffies(UCSI_TIMEOUT_MS)))
ret = -ETIMEDOUT;
out_clear_bit:
clear_bit(ACK_PENDING, &ucsi->flags);
if (ret)
dev_err(ucsi->dev, "%s: failed\n", __func__);
return ret;
}
static int ucsi_run_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
void *data, size_t size)
{
struct ucsi_control _ctrl;
u8 data_length;
u16 error;
int ret;
ret = ucsi_command(ucsi, ctrl);
if (ret)
goto err;
switch (ucsi->status) {
case UCSI_IDLE:
ret = ucsi_sync(ucsi);
if (ret)
dev_warn(ucsi->dev, "%s: sync failed\n", __func__);
if (data)
memcpy(data, ucsi->ppm->data->message_in, size);
data_length = ucsi->ppm->data->cci.data_length;
ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
if (!ret)
ret = data_length;
break;
case UCSI_BUSY:
/* The caller decides whether to cancel or not */
ret = -EBUSY;
break;
case UCSI_ERROR:
ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
if (ret)
break;
_ctrl.raw_cmd = 0;
_ctrl.cmd.cmd = UCSI_GET_ERROR_STATUS;
ret = ucsi_command(ucsi, &_ctrl);
if (ret) {
dev_err(ucsi->dev, "reading error failed!\n");
break;
}
memcpy(&error, ucsi->ppm->data->message_in, sizeof(error));
/* Something has really gone wrong */
if (WARN_ON(ucsi->status == UCSI_ERROR)) {
ret = -ENODEV;
break;
}
ret = ucsi_ack(ucsi, UCSI_ACK_CMD);
if (ret)
break;
switch (error) {
case UCSI_ERROR_INCOMPATIBLE_PARTNER:
ret = -EOPNOTSUPP;
break;
case UCSI_ERROR_CC_COMMUNICATION_ERR:
ret = -ECOMM;
break;
case UCSI_ERROR_CONTRACT_NEGOTIATION_FAIL:
ret = -EPROTO;
break;
case UCSI_ERROR_DEAD_BATTERY:
dev_warn(ucsi->dev, "Dead battery condition!\n");
ret = -EPERM;
break;
/* The following mean a bug in this driver */
case UCSI_ERROR_INVALID_CON_NUM:
case UCSI_ERROR_UNREGONIZED_CMD:
case UCSI_ERROR_INVALID_CMD_ARGUMENT:
dev_warn(ucsi->dev,
"%s: possible UCSI driver bug - error 0x%x\n",
__func__, error);
ret = -EINVAL;
break;
default:
dev_warn(ucsi->dev,
"%s: error without status\n", __func__);
ret = -EIO;
break;
}
break;
}
err:
trace_ucsi_run_command(ctrl, ret);
return ret;
}
int ucsi_send_command(struct ucsi *ucsi, struct ucsi_control *ctrl,
void *retval, size_t size)
{
int ret;
mutex_lock(&ucsi->ppm_lock);
ret = ucsi_run_command(ucsi, ctrl, retval, size);
mutex_unlock(&ucsi->ppm_lock);
return ret;
}
EXPORT_SYMBOL_GPL(ucsi_send_command);
int ucsi_resume(struct ucsi *ucsi)
{
struct ucsi_control ctrl;
/* Restore UCSI notification enable mask after system resume */
UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_ALL);
return ucsi_send_command(ucsi, &ctrl, NULL, 0);
}
EXPORT_SYMBOL_GPL(ucsi_resume);
/* -------------------------------------------------------------------------- */
void ucsi_altmode_update_active(struct ucsi_connector *con)
{
const struct typec_altmode *altmode = NULL;
struct ucsi_control ctrl;
int ret;
u8 cur;
int i;
UCSI_CMD_GET_CURRENT_CAM(ctrl, con->num);
ret = ucsi_run_command(con->ucsi, &ctrl, &cur, sizeof(cur));
if (ret < 0) {
if (con->ucsi->ppm->data->version > 0x0100) {
dev_err(con->ucsi->dev,
"GET_CURRENT_CAM command failed\n");
return;
}
cur = 0xff;
}
if (cur < UCSI_MAX_ALTMODES)
altmode = typec_altmode_get_partner(con->port_altmode[cur]);
for (i = 0; con->partner_altmode[i]; i++)
typec_altmode_update_active(con->partner_altmode[i],
con->partner_altmode[i] == altmode);
}
static u8 ucsi_altmode_next_mode(struct typec_altmode **alt, u16 svid)
{
u8 mode = 1;
int i;
for (i = 0; alt[i]; i++)
if (alt[i]->svid == svid)
mode++;
return mode;
}
static int ucsi_next_altmode(struct typec_altmode **alt)
{
int i = 0;
for (i = 0; i < UCSI_MAX_ALTMODES; i++)
if (!alt[i])
return i;
return -ENOENT;
}
static int ucsi_register_altmode(struct ucsi_connector *con,
struct typec_altmode_desc *desc,
u8 recipient)
{
struct typec_altmode *alt;
bool override;
int ret;
int i;
override = !!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_OVERRIDE);
switch (recipient) {
case UCSI_RECIPIENT_CON:
i = ucsi_next_altmode(con->port_altmode);
if (i < 0) {
ret = i;
goto err;
}
desc->mode = ucsi_altmode_next_mode(con->port_altmode,
desc->svid);
switch (desc->svid) {
case USB_TYPEC_DP_SID:
case USB_TYPEC_NVIDIA_VLINK_SID:
alt = ucsi_register_displayport(con, override, i, desc);
break;
default:
alt = typec_port_register_altmode(con->port, desc);
break;
}
if (IS_ERR(alt)) {
ret = PTR_ERR(alt);
goto err;
}
con->port_altmode[i] = alt;
break;
case UCSI_RECIPIENT_SOP:
i = ucsi_next_altmode(con->partner_altmode);
if (i < 0) {
ret = i;
goto err;
}
desc->mode = ucsi_altmode_next_mode(con->partner_altmode,
desc->svid);
alt = typec_partner_register_altmode(con->partner, desc);
if (IS_ERR(alt)) {
ret = PTR_ERR(alt);
goto err;
}
con->partner_altmode[i] = alt;
break;
default:
return -EINVAL;
}
trace_ucsi_register_altmode(recipient, alt);
return 0;
err:
dev_err(con->ucsi->dev, "failed to registers svid 0x%04x mode %d\n",
desc->svid, desc->mode);
return ret;
}
static int ucsi_register_altmodes(struct ucsi_connector *con, u8 recipient)
{
int max_altmodes = UCSI_MAX_ALTMODES;
struct typec_altmode_desc desc;
struct ucsi_altmode alt[2];
struct ucsi_control ctrl;
int num = 1;
int ret;
int len;
int j;
int i;
if (!(con->ucsi->cap.features & UCSI_CAP_ALT_MODE_DETAILS))
return 0;
if (recipient == UCSI_RECIPIENT_SOP && con->partner_altmode[0])
return 0;
if (recipient == UCSI_RECIPIENT_CON)
max_altmodes = con->ucsi->cap.num_alt_modes;
for (i = 0; i < max_altmodes;) {
memset(alt, 0, sizeof(alt));
UCSI_CMD_GET_ALTERNATE_MODES(ctrl, recipient, con->num, i, 1);
len = ucsi_run_command(con->ucsi, &ctrl, alt, sizeof(alt));
if (len <= 0)
return len;
/*
* This code is requesting one alt mode at a time, but some PPMs
* may still return two. If that happens both alt modes need be
* registered and the offset for the next alt mode has to be
* incremented.
*/
num = len / sizeof(alt[0]);
i += num;
for (j = 0; j < num; j++) {
if (!alt[j].svid)
return 0;
memset(&desc, 0, sizeof(desc));
desc.vdo = alt[j].mid;
desc.svid = alt[j].svid;
desc.roles = TYPEC_PORT_DRD;
ret = ucsi_register_altmode(con, &desc, recipient);
if (ret)
return ret;
}
}
return 0;
}
static void ucsi_unregister_altmodes(struct ucsi_connector *con, u8 recipient)
{
const struct typec_altmode *pdev;
struct typec_altmode **adev;
int i = 0;
switch (recipient) {
case UCSI_RECIPIENT_CON:
adev = con->port_altmode;
break;
case UCSI_RECIPIENT_SOP:
adev = con->partner_altmode;
break;
default:
return;
}
while (adev[i]) {
if (recipient == UCSI_RECIPIENT_SOP &&
(adev[i]->svid == USB_TYPEC_DP_SID ||
adev[i]->svid == USB_TYPEC_NVIDIA_VLINK_SID)) {
pdev = typec_altmode_get_partner(adev[i]);
ucsi_displayport_remove_partner((void *)pdev);
}
typec_unregister_altmode(adev[i]);
adev[i++] = NULL;
}
}
static void ucsi_pwr_opmode_change(struct ucsi_connector *con)
{
switch (con->status.pwr_op_mode) {
case UCSI_CONSTAT_PWR_OPMODE_PD:
typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_PD);
break;
case UCSI_CONSTAT_PWR_OPMODE_TYPEC1_5:
typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_1_5A);
break;
case UCSI_CONSTAT_PWR_OPMODE_TYPEC3_0:
typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_3_0A);
break;
default:
typec_set_pwr_opmode(con->port, TYPEC_PWR_MODE_USB);
break;
}
}
static int ucsi_register_partner(struct ucsi_connector *con)
{
struct typec_partner_desc desc;
struct typec_partner *partner;
if (con->partner)
return 0;
memset(&desc, 0, sizeof(desc));
switch (con->status.partner_type) {
case UCSI_CONSTAT_PARTNER_TYPE_DEBUG:
desc.accessory = TYPEC_ACCESSORY_DEBUG;
break;
case UCSI_CONSTAT_PARTNER_TYPE_AUDIO:
desc.accessory = TYPEC_ACCESSORY_AUDIO;
break;
default:
break;
}
desc.usb_pd = con->status.pwr_op_mode == UCSI_CONSTAT_PWR_OPMODE_PD;
partner = typec_register_partner(con->port, &desc);
if (IS_ERR(partner)) {
dev_err(con->ucsi->dev,
"con%d: failed to register partner (%ld)\n", con->num,
PTR_ERR(partner));
return PTR_ERR(partner);
}
con->partner = partner;
return 0;
}
static void ucsi_unregister_partner(struct ucsi_connector *con)
{
if (!con->partner)
return;
ucsi_unregister_altmodes(con, UCSI_RECIPIENT_SOP);
typec_unregister_partner(con->partner);
con->partner = NULL;
}
static void ucsi_partner_change(struct ucsi_connector *con)
{
int ret;
if (!con->partner)
return;
switch (con->status.partner_type) {
case UCSI_CONSTAT_PARTNER_TYPE_UFP:
typec_set_data_role(con->port, TYPEC_HOST);
break;
case UCSI_CONSTAT_PARTNER_TYPE_DFP:
typec_set_data_role(con->port, TYPEC_DEVICE);
break;
default:
break;
}
/* Complete pending data role swap */
if (!completion_done(&con->complete))
complete(&con->complete);
/* Can't rely on Partner Flags field. Always checking the alt modes. */
ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
if (ret)
dev_err(con->ucsi->dev,
"con%d: failed to register partner alternate modes\n",
con->num);
else
ucsi_altmode_update_active(con);
}
static void ucsi_connector_change(struct work_struct *work)
{
struct ucsi_connector *con = container_of(work, struct ucsi_connector,
work);
struct ucsi *ucsi = con->ucsi;
struct ucsi_control ctrl;
int ret;
mutex_lock(&con->lock);
UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num);
ret = ucsi_send_command(ucsi, &ctrl, &con->status, sizeof(con->status));
if (ret < 0) {
dev_err(ucsi->dev, "%s: GET_CONNECTOR_STATUS failed (%d)\n",
__func__, ret);
goto out_unlock;
}
if (con->status.change & UCSI_CONSTAT_POWER_OPMODE_CHANGE)
ucsi_pwr_opmode_change(con);
if (con->status.change & UCSI_CONSTAT_POWER_DIR_CHANGE) {
typec_set_pwr_role(con->port, con->status.pwr_dir);
/* Complete pending power role swap */
if (!completion_done(&con->complete))
complete(&con->complete);
}
if (con->status.change & UCSI_CONSTAT_CONNECT_CHANGE) {
typec_set_pwr_role(con->port, con->status.pwr_dir);
switch (con->status.partner_type) {
case UCSI_CONSTAT_PARTNER_TYPE_UFP:
typec_set_data_role(con->port, TYPEC_HOST);
break;
case UCSI_CONSTAT_PARTNER_TYPE_DFP:
typec_set_data_role(con->port, TYPEC_DEVICE);
break;
default:
break;
}
if (con->status.connected)
ucsi_register_partner(con);
else
ucsi_unregister_partner(con);
}
if (con->status.change & UCSI_CONSTAT_CAM_CHANGE) {
/*
* We don't need to know the currently supported alt modes here.
* Running GET_CAM_SUPPORTED command just to make sure the PPM
* does not get stuck in case it assumes we do so.
*/
UCSI_CMD_GET_CAM_SUPPORTED(ctrl, con->num);
ucsi_run_command(con->ucsi, &ctrl, NULL, 0);
}
if (con->status.change & UCSI_CONSTAT_PARTNER_CHANGE)
ucsi_partner_change(con);
ret = ucsi_ack(ucsi, UCSI_ACK_EVENT);
if (ret)
dev_err(ucsi->dev, "%s: ACK failed (%d)", __func__, ret);
trace_ucsi_connector_change(con->num, &con->status);
out_unlock:
clear_bit(EVENT_PENDING, &ucsi->flags);
mutex_unlock(&con->lock);
}
/**
* ucsi_notify - PPM notification handler
* @ucsi: Source UCSI Interface for the notifications
*
* Handle notifications from PPM of @ucsi.
*/
void ucsi_notify(struct ucsi *ucsi)
{
struct ucsi_cci *cci;
/* There is no requirement to sync here, but no harm either. */
ucsi_sync(ucsi);
cci = &ucsi->ppm->data->cci;
if (cci->error)
ucsi->status = UCSI_ERROR;
else if (cci->busy)
ucsi->status = UCSI_BUSY;
else
ucsi->status = UCSI_IDLE;
if (cci->cmd_complete && test_bit(COMMAND_PENDING, &ucsi->flags)) {
complete(&ucsi->complete);
} else if (cci->ack_complete && test_bit(ACK_PENDING, &ucsi->flags)) {
complete(&ucsi->complete);
} else if (cci->connector_change) {
struct ucsi_connector *con;
con = &ucsi->connector[cci->connector_change - 1];
if (!test_and_set_bit(EVENT_PENDING, &ucsi->flags))
schedule_work(&con->work);
}
trace_ucsi_notify(ucsi->ppm->data->raw_cci);
}
EXPORT_SYMBOL_GPL(ucsi_notify);
/* -------------------------------------------------------------------------- */
static int ucsi_reset_connector(struct ucsi_connector *con, bool hard)
{
struct ucsi_control ctrl;
UCSI_CMD_CONNECTOR_RESET(ctrl, con, hard);
return ucsi_send_command(con->ucsi, &ctrl, NULL, 0);
}
static int ucsi_reset_ppm(struct ucsi *ucsi)
{
struct ucsi_control ctrl;
unsigned long tmo;
int ret;
ctrl.raw_cmd = 0;
ctrl.cmd.cmd = UCSI_PPM_RESET;
trace_ucsi_command(&ctrl);
ret = ucsi->ppm->cmd(ucsi->ppm, &ctrl);
if (ret)
goto err;
tmo = jiffies + msecs_to_jiffies(UCSI_TIMEOUT_MS);
do {
/* Here sync is critical. */
ret = ucsi_sync(ucsi);
if (ret)
goto err;
if (ucsi->ppm->data->cci.reset_complete)
break;
/* If the PPM is still doing something else, reset it again. */
if (ucsi->ppm->data->raw_cci) {
dev_warn_ratelimited(ucsi->dev,
"Failed to reset PPM! Trying again..\n");
trace_ucsi_command(&ctrl);
ret = ucsi->ppm->cmd(ucsi->ppm, &ctrl);
if (ret)
goto err;
}
/* Letting the PPM settle down. */
msleep(20);
ret = -ETIMEDOUT;
} while (time_is_after_jiffies(tmo));
err:
trace_ucsi_reset_ppm(&ctrl, ret);
return ret;
}
static int ucsi_role_cmd(struct ucsi_connector *con, struct ucsi_control *ctrl)
{
int ret;
ret = ucsi_send_command(con->ucsi, ctrl, NULL, 0);
if (ret == -ETIMEDOUT) {
struct ucsi_control c;
/* PPM most likely stopped responding. Resetting everything. */
mutex_lock(&con->ucsi->ppm_lock);
ucsi_reset_ppm(con->ucsi);
mutex_unlock(&con->ucsi->ppm_lock);
UCSI_CMD_SET_NTFY_ENABLE(c, UCSI_ENABLE_NTFY_ALL);
ucsi_send_command(con->ucsi, &c, NULL, 0);
ucsi_reset_connector(con, true);
}
return ret;
}
static int
ucsi_dr_swap(const struct typec_capability *cap, enum typec_data_role role)
{
struct ucsi_connector *con = to_ucsi_connector(cap);
struct ucsi_control ctrl;
int ret = 0;
mutex_lock(&con->lock);
if (!con->partner) {
ret = -ENOTCONN;
goto out_unlock;
}
if ((con->status.partner_type == UCSI_CONSTAT_PARTNER_TYPE_DFP &&
role == TYPEC_DEVICE) ||
(con->status.partner_type == UCSI_CONSTAT_PARTNER_TYPE_UFP &&
role == TYPEC_HOST))
goto out_unlock;
UCSI_CMD_SET_UOR(ctrl, con, role);
ret = ucsi_role_cmd(con, &ctrl);
if (ret < 0)
goto out_unlock;
if (!wait_for_completion_timeout(&con->complete,
msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS)))
ret = -ETIMEDOUT;
out_unlock:
mutex_unlock(&con->lock);
return ret < 0 ? ret : 0;
}
static int
ucsi_pr_swap(const struct typec_capability *cap, enum typec_role role)
{
struct ucsi_connector *con = to_ucsi_connector(cap);
struct ucsi_control ctrl;
int ret = 0;
mutex_lock(&con->lock);
if (!con->partner) {
ret = -ENOTCONN;
goto out_unlock;
}
if (con->status.pwr_dir == role)
goto out_unlock;
UCSI_CMD_SET_PDR(ctrl, con, role);
ret = ucsi_role_cmd(con, &ctrl);
if (ret < 0)
goto out_unlock;
if (!wait_for_completion_timeout(&con->complete,
msecs_to_jiffies(UCSI_SWAP_TIMEOUT_MS))) {
ret = -ETIMEDOUT;
goto out_unlock;
}
/* Something has gone wrong while swapping the role */
if (con->status.pwr_op_mode != UCSI_CONSTAT_PWR_OPMODE_PD) {
ucsi_reset_connector(con, true);
ret = -EPROTO;
}
out_unlock:
mutex_unlock(&con->lock);
return ret;
}
static struct fwnode_handle *ucsi_find_fwnode(struct ucsi_connector *con)
{
struct fwnode_handle *fwnode;
int i = 1;
device_for_each_child_node(con->ucsi->dev, fwnode)
if (i++ == con->num)
return fwnode;
return NULL;
}
static int ucsi_register_port(struct ucsi *ucsi, int index)
{
struct ucsi_connector *con = &ucsi->connector[index];
struct typec_capability *cap = &con->typec_cap;
enum typec_accessory *accessory = cap->accessory;
struct ucsi_control ctrl;
int ret;
INIT_WORK(&con->work, ucsi_connector_change);
init_completion(&con->complete);
mutex_init(&con->lock);
con->num = index + 1;
con->ucsi = ucsi;
/* Get connector capability */
UCSI_CMD_GET_CONNECTOR_CAPABILITY(ctrl, con->num);
ret = ucsi_run_command(ucsi, &ctrl, &con->cap, sizeof(con->cap));
if (ret < 0)
return ret;
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DRP)
cap->data = TYPEC_PORT_DRD;
else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DFP)
cap->data = TYPEC_PORT_DFP;
else if (con->cap.op_mode & UCSI_CONCAP_OPMODE_UFP)
cap->data = TYPEC_PORT_UFP;
if (con->cap.provider && con->cap.consumer)
cap->type = TYPEC_PORT_DRP;
else if (con->cap.provider)
cap->type = TYPEC_PORT_SRC;
else if (con->cap.consumer)
cap->type = TYPEC_PORT_SNK;
cap->revision = ucsi->cap.typec_version;
cap->pd_revision = ucsi->cap.pd_version;
cap->prefer_role = TYPEC_NO_PREFERRED_ROLE;
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_AUDIO_ACCESSORY)
*accessory++ = TYPEC_ACCESSORY_AUDIO;
if (con->cap.op_mode & UCSI_CONCAP_OPMODE_DEBUG_ACCESSORY)
*accessory = TYPEC_ACCESSORY_DEBUG;
cap->fwnode = ucsi_find_fwnode(con);
cap->dr_set = ucsi_dr_swap;
cap->pr_set = ucsi_pr_swap;
/* Register the connector */
con->port = typec_register_port(ucsi->dev, cap);
if (IS_ERR(con->port))
return PTR_ERR(con->port);
/* Alternate modes */
ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_CON);
if (ret)
dev_err(ucsi->dev, "con%d: failed to register alt modes\n",
con->num);
/* Get the status */
UCSI_CMD_GET_CONNECTOR_STATUS(ctrl, con->num);
ret = ucsi_run_command(ucsi, &ctrl, &con->status, sizeof(con->status));
if (ret < 0) {
dev_err(ucsi->dev, "con%d: failed to get status\n", con->num);
return 0;
}
ucsi_pwr_opmode_change(con);
typec_set_pwr_role(con->port, con->status.pwr_dir);
switch (con->status.partner_type) {
case UCSI_CONSTAT_PARTNER_TYPE_UFP:
typec_set_data_role(con->port, TYPEC_HOST);
break;
case UCSI_CONSTAT_PARTNER_TYPE_DFP:
typec_set_data_role(con->port, TYPEC_DEVICE);
break;
default:
break;
}
/* Check if there is already something connected */
if (con->status.connected)
ucsi_register_partner(con);
if (con->partner) {
ret = ucsi_register_altmodes(con, UCSI_RECIPIENT_SOP);
if (ret)
dev_err(ucsi->dev,
"con%d: failed to register alternate modes\n",
con->num);
else
ucsi_altmode_update_active(con);
}
trace_ucsi_register_port(con->num, &con->status);
return 0;
}
static void ucsi_init(struct work_struct *work)
{
struct ucsi *ucsi = container_of(work, struct ucsi, work);
struct ucsi_connector *con;
struct ucsi_control ctrl;
int ret;
int i;
mutex_lock(&ucsi->ppm_lock);
/* Reset the PPM */
ret = ucsi_reset_ppm(ucsi);
if (ret) {
dev_err(ucsi->dev, "failed to reset PPM!\n");
goto err;
}
/* Enable basic notifications */
UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_CMD_COMPLETE |
UCSI_ENABLE_NTFY_ERROR);
ret = ucsi_run_command(ucsi, &ctrl, NULL, 0);
if (ret < 0)
goto err_reset;
/* Get PPM capabilities */
UCSI_CMD_GET_CAPABILITY(ctrl);
ret = ucsi_run_command(ucsi, &ctrl, &ucsi->cap, sizeof(ucsi->cap));
if (ret < 0)
goto err_reset;
if (!ucsi->cap.num_connectors) {
ret = -ENODEV;
goto err_reset;
}
/* Allocate the connectors. Released in ucsi_unregister_ppm() */
ucsi->connector = kcalloc(ucsi->cap.num_connectors + 1,
sizeof(*ucsi->connector), GFP_KERNEL);
if (!ucsi->connector) {
ret = -ENOMEM;
goto err_reset;
}
/* Register all connectors */
for (i = 0; i < ucsi->cap.num_connectors; i++) {
ret = ucsi_register_port(ucsi, i);
if (ret)
goto err_unregister;
}
/* Enable all notifications */
UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_ALL);
ret = ucsi_run_command(ucsi, &ctrl, NULL, 0);
if (ret < 0)
goto err_unregister;
mutex_unlock(&ucsi->ppm_lock);
return;
err_unregister:
for (con = ucsi->connector; con->port; con++) {
ucsi_unregister_partner(con);
ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
typec_unregister_port(con->port);
con->port = NULL;
}
err_reset:
ucsi_reset_ppm(ucsi);
err:
mutex_unlock(&ucsi->ppm_lock);
dev_err(ucsi->dev, "PPM init failed (%d)\n", ret);
}
/**
* ucsi_register_ppm - Register UCSI PPM Interface
* @dev: Device interface to the PPM
* @ppm: The PPM interface
*
* Allocates UCSI instance, associates it with @ppm and returns it to the
* caller, and schedules initialization of the interface.
*/
struct ucsi *ucsi_register_ppm(struct device *dev, struct ucsi_ppm *ppm)
{
struct ucsi *ucsi;
ucsi = kzalloc(sizeof(*ucsi), GFP_KERNEL);
if (!ucsi)
return ERR_PTR(-ENOMEM);
INIT_WORK(&ucsi->work, ucsi_init);
init_completion(&ucsi->complete);
mutex_init(&ucsi->ppm_lock);
ucsi->dev = dev;
ucsi->ppm = ppm;
/*
* Communication with the PPM takes a lot of time. It is not reasonable
* to initialize the driver here. Using a work for now.
*/
queue_work(system_long_wq, &ucsi->work);
return ucsi;
}
EXPORT_SYMBOL_GPL(ucsi_register_ppm);
/**
* ucsi_unregister_ppm - Unregister UCSI PPM Interface
* @ucsi: struct ucsi associated with the PPM
*
* Unregister UCSI PPM that was created with ucsi_register().
*/
void ucsi_unregister_ppm(struct ucsi *ucsi)
{
struct ucsi_control ctrl;
int i;
/* Make sure that we are not in the middle of driver initialization */
cancel_work_sync(&ucsi->work);
/* Disable everything except command complete notification */
UCSI_CMD_SET_NTFY_ENABLE(ctrl, UCSI_ENABLE_NTFY_CMD_COMPLETE)
ucsi_send_command(ucsi, &ctrl, NULL, 0);
for (i = 0; i < ucsi->cap.num_connectors; i++) {
cancel_work_sync(&ucsi->connector[i].work);
ucsi_unregister_partner(&ucsi->connector[i]);
ucsi_unregister_altmodes(&ucsi->connector[i],
UCSI_RECIPIENT_CON);
typec_unregister_port(ucsi->connector[i].port);
}
ucsi_reset_ppm(ucsi);
kfree(ucsi->connector);
kfree(ucsi);
}
EXPORT_SYMBOL_GPL(ucsi_unregister_ppm);
MODULE_AUTHOR("Heikki Krogerus <heikki.krogerus@linux.intel.com>");
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("USB Type-C Connector System Software Interface driver");