/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include "imx6q-pinfunc.h"
#include "imx6qdl.dtsi"
/ {
aliases {
ipu1 = &ipu2;
spi4 = &ecspi5;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu0: cpu@0 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
1200000 1275000
996000 1250000
852000 1250000
792000 1175000
396000 975000
>;
fsl,soc-operating-points = <
/* ARM kHz SOC-PU uV */
1200000 1275000
996000 1250000
852000 1250000
792000 1175000
396000 1175000
>;
clock-latency = <61036>; /* two CLK32 periods */
clocks = <&clks IMX6QDL_CLK_ARM>,
<&clks IMX6QDL_CLK_PLL2_PFD2_396M>,
<&clks IMX6QDL_CLK_STEP>,
<&clks IMX6QDL_CLK_PLL1_SW>,
<&clks IMX6QDL_CLK_PLL1_SYS>;
clock-names = "arm", "pll2_pfd2_396m", "step",
"pll1_sw", "pll1_sys";
arm-supply = <®_arm>;
pu-supply = <®_pu>;
soc-supply = <®_soc>;
};
cpu@1 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@2 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <2>;
next-level-cache = <&L2>;
};
cpu@3 {
compatible = "arm,cortex-a9";
device_type = "cpu";
reg = <3>;
next-level-cache = <&L2>;
};
};
soc {
ocram: sram@00900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x40000>;
clocks = <&clks IMX6QDL_CLK_OCRAM>;
};
aips-bus@02000000 { /* AIPS1 */
spba-bus@02000000 {
ecspi5: ecspi@02018000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ecspi", "fsl,imx51-ecspi";
reg = <0x02018000 0x4000>;
interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6Q_CLK_ECSPI5>,
<&clks IMX6Q_CLK_ECSPI5>;
clock-names = "ipg", "per";
dmas = <&sdma 11 7 1>, <&sdma 12 7 2>;
dma-names = "rx", "tx";
status = "disabled";
};
};
iomuxc: iomuxc@020e0000 {
compatible = "fsl,imx6q-iomuxc";
};
};
sata: sata@02200000 {
compatible = "fsl,imx6q-ahci";
reg = <0x02200000 0x4000>;
interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_SATA>,
<&clks IMX6QDL_CLK_SATA_REF_100M>,
<&clks IMX6QDL_CLK_AHB>;
clock-names = "sata", "sata_ref", "ahb";
status = "disabled";
};
gpu_vg: gpu@02204000 {
compatible = "vivante,gc";
reg = <0x02204000 0x4000>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_OPENVG_AXI>,
<&clks IMX6QDL_CLK_GPU2D_CORE>;
clock-names = "bus", "core";
power-domains = <&gpc 1>;
};
ipu2: ipu@02800000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx6q-ipu";
reg = <0x02800000 0x400000>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
<0 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6QDL_CLK_IPU2>,
<&clks IMX6QDL_CLK_IPU2_DI0>,
<&clks IMX6QDL_CLK_IPU2_DI1>;
clock-names = "bus", "di0", "di1";
resets = <&src 4>;
ipu2_csi0: port@0 {
reg = <0>;
};
ipu2_csi1: port@1 {
reg = <1>;
};
ipu2_di0: port@2 {
#address-cells = <1>;
#size-cells = <0>;
reg = <2>;
ipu2_di0_disp0: disp0-endpoint {
};
ipu2_di0_hdmi: hdmi-endpoint {
remote-endpoint = <&hdmi_mux_2>;
};
ipu2_di0_mipi: mipi-endpoint {
remote-endpoint = <&mipi_mux_2>;
};
ipu2_di0_lvds0: lvds0-endpoint {
remote-endpoint = <&lvds0_mux_2>;
};
ipu2_di0_lvds1: lvds1-endpoint {
remote-endpoint = <&lvds1_mux_2>;
};
};
ipu2_di1: port@3 {
#address-cells = <1>;
#size-cells = <0>;
reg = <3>;
ipu2_di1_hdmi: hdmi-endpoint {
remote-endpoint = <&hdmi_mux_3>;
};
ipu2_di1_mipi: mipi-endpoint {
remote-endpoint = <&mipi_mux_3>;
};
ipu2_di1_lvds0: lvds0-endpoint {
remote-endpoint = <&lvds0_mux_3>;
};
ipu2_di1_lvds1: lvds1-endpoint {
remote-endpoint = <&lvds1_mux_3>;
};
};
};
};
display-subsystem {
compatible = "fsl,imx-display-subsystem";
ports = <&ipu1_di0>, <&ipu1_di1>, <&ipu2_di0>, <&ipu2_di1>;
};
gpu-subsystem {
compatible = "fsl,imx-gpu-subsystem";
cores = <&gpu_2d>, <&gpu_3d>, <&gpu_vg>;
};
};
&gpio1 {
gpio-ranges = <&iomuxc 0 136 2>, <&iomuxc 2 141 1>, <&iomuxc 3 139 1>,
<&iomuxc 4 142 2>, <&iomuxc 6 140 1>, <&iomuxc 7 144 2>,
<&iomuxc 9 138 1>, <&iomuxc 10 213 3>, <&iomuxc 13 20 1>,
<&iomuxc 14 19 1>, <&iomuxc 15 21 1>, <&iomuxc 16 208 1>,
<&iomuxc 17 207 1>, <&iomuxc 18 210 3>, <&iomuxc 21 209 1>,
<&iomuxc 22 116 10>;
};
&gpio2 {
gpio-ranges = <&iomuxc 0 191 16>, <&iomuxc 16 55 14>, <&iomuxc 30 35 1>,
<&iomuxc 31 44 1>;
};
&gpio3 {
gpio-ranges = <&iomuxc 0 69 16>, <&iomuxc 16 36 8>, <&iomuxc 24 45 8>;
};
&gpio4 {
gpio-ranges = <&iomuxc 5 149 1>, <&iomuxc 6 126 10>, <&iomuxc 16 87 16>;
};
&gpio5 {
gpio-ranges = <&iomuxc 0 85 1>, <&iomuxc 2 34 1>, <&iomuxc 4 53 1>,
<&iomuxc 5 103 13>, <&iomuxc 18 150 14>;
};
&gpio6 {
gpio-ranges = <&iomuxc 0 164 6>, <&iomuxc 6 54 1>, <&iomuxc 7 181 5>,
<&iomuxc 14 186 3>, <&iomuxc 17 170 2>, <&iomuxc 19 22 12>,
<&iomuxc 31 86 1>;
};
&gpio7 {
gpio-ranges = <&iomuxc 0 172 9>, <&iomuxc 9 189 2>, <&iomuxc 11 146 3>;
};
&hdmi {
compatible = "fsl,imx6q-hdmi";
port@2 {
reg = <2>;
hdmi_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_hdmi>;
};
};
port@3 {
reg = <3>;
hdmi_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_hdmi>;
};
};
};
&ldb {
clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, <&clks IMX6QDL_CLK_LDB_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU1_DI0_SEL>, <&clks IMX6QDL_CLK_IPU1_DI1_SEL>,
<&clks IMX6QDL_CLK_IPU2_DI0_SEL>, <&clks IMX6QDL_CLK_IPU2_DI1_SEL>,
<&clks IMX6QDL_CLK_LDB_DI0>, <&clks IMX6QDL_CLK_LDB_DI1>;
clock-names = "di0_pll", "di1_pll",
"di0_sel", "di1_sel", "di2_sel", "di3_sel",
"di0", "di1";
lvds-channel@0 {
port@2 {
reg = <2>;
lvds0_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_lvds0>;
};
};
port@3 {
reg = <3>;
lvds0_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_lvds0>;
};
};
};
lvds-channel@1 {
port@2 {
reg = <2>;
lvds1_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_lvds1>;
};
};
port@3 {
reg = <3>;
lvds1_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_lvds1>;
};
};
};
};
&mipi_dsi {
ports {
port@2 {
reg = <2>;
mipi_mux_2: endpoint {
remote-endpoint = <&ipu2_di0_mipi>;
};
};
port@3 {
reg = <3>;
mipi_mux_3: endpoint {
remote-endpoint = <&ipu2_di1_mipi>;
};
};
};
};
&vpu {
compatible = "fsl,imx6q-vpu", "cnm,coda960";
};