#
# 8390 device configuration
#
config [31mCONFIG_NET_VENDOR_8390[0m
bool "National Semi-conductor 8390 devices"
default y
depends on [31mCONFIG_NET_VENDOR_NATSEMI[0m
---help---
If you have a network (Ethernet) card belonging to this class, say Y.
Note that the answer to this question doesn't directly affect the
kernel: saying N will just cause the configurator to skip all
the questions about Western Digital cards. If you say Y, you will be
asked for your specific card in the following questions.
if [31mCONFIG_NET_VENDOR_8390[0m
config [31mCONFIG_PCMCIA_AXNET[0m
tristate "Asix AX88190 PCMCIA support"
depends on [31mCONFIG_PCMCIA[0m
---help---
Say Y here if you intend to attach an Asix AX88190-based [31mCONFIG_PCMCIA[0m
(PC-card) Fast Ethernet card to your computer. These cards are
nearly [31mCONFIG_NE2000[0m compatible but need a separate driver due to a few
misfeatures.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called axnet_cs. If unsure, say N.
config [31mCONFIG_AX88796[0m
tristate "ASIX AX88796 NE2000 clone support"
depends on ([31mCONFIG_ARM[0m || [31mCONFIG_MIPS[0m || [31mCONFIG_SUPERH[0m)
select [31mCONFIG_CRC32[0m
select [31mCONFIG_PHYLIB[0m
select [31mCONFIG_MDIO_BITBANG[0m
---help---
[31mCONFIG_AX88796[0m driver, using platform bus to provide
chip detection and resources
config [31mCONFIG_AX88796_93CX6[0m
bool "ASIX AX88796 external 93CX6 eeprom support"
depends on [31mCONFIG_AX88796[0m
select [31mCONFIG_EEPROM_93CX6[0m
---help---
Select this if your platform comes with an external 93CX6 eeprom.
config [31mCONFIG_HYDRA[0m
tristate "Hydra support"
depends on [31mCONFIG_ZORRO[0m
select [31mCONFIG_CRC32[0m
---help---
If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called hydra.
config [31mCONFIG_ARM_ETHERH[0m
tristate "I-cubed EtherH/ANT EtherM support"
depends on [31mCONFIG_ARM[0m && [31mCONFIG_ARCH_ACORN[0m
select [31mCONFIG_CRC32[0m
---help---
If you have an Acorn system with one of these network cards, you
should say Y to this option if you wish to use it with Linux.
config [31mCONFIG_MAC8390[0m
tristate "Macintosh NS 8390 based ethernet cards"
depends on [31mCONFIG_MAC[0m
select [31mCONFIG_CRC32[0m
---help---
If you want to include a driver to support Nubus or LC-PDS
Ethernet cards using an NS8390 chipset or its equivalent, say Y.
config [31mCONFIG_MCF8390[0m
tristate "ColdFire NS8390 based Ethernet support"
depends on [31mCONFIG_COLDFIRE[0m
select [31mCONFIG_CRC32[0m
---help---
This driver is for Ethernet devices using an NS8390-compatible
chipset on many common ColdFire CPU based boards. Many of the older
Freescale dev boards use this, and some other common boards like
some SnapGear routers do as well.
If you have one of these boards and want to use the network interface
on them then choose Y. To compile this driver as a module, choose [31mCONFIG_M[0m
here, the module will be called mcf8390.
config [31mCONFIG_NE2000[0m
tristate "NE2000/NE1000 support"
depends on ([31mCONFIG_ISA[0m || ([31mCONFIG_Q40[0m && m) || [31mCONFIG_M32R[0m || [31mCONFIG_MACH_TX49XX[0m || \
[31mCONFIG_ATARI_ETHERNEC[0m)
select [31mCONFIG_CRC32[0m
---help---
If you have a network (Ethernet) card of this type, say Y here.
Many Ethernet cards without a specific driver are compatible with
the [31mCONFIG_NE2000[0m.
If you have a [31mCONFIG_PCI[0m [31mCONFIG_NE2000[0m card however, say N here and Y to "PCI
NE2000 and clone support" below.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called ne.
config [31mCONFIG_NE2K_PCI[0m
tristate "PCI NE2000 and clones support (see help)"
depends on [31mCONFIG_PCI[0m
select [31mCONFIG_CRC32[0m
---help---
This driver is for [31mCONFIG_NE2000[0m compatible [31mCONFIG_PCI[0m cards. It will not work
with [31mCONFIG_ISA[0m [31mCONFIG_NE2000[0m cards (they have their own driver, "NE2000/NE1000
support" below). If you have a [31mCONFIG_PCI[0m [31mCONFIG_NE2000[0m network (Ethernet) card,
say Y here.
This driver also works for the following [31mCONFIG_NE2000[0m clone cards:
RealTek RTL-8029 Winbond 89C940 Compex RL2000 KTI ET32P2
NetVin NV5000SC Via 86C926 SureCom NE34 Winbond
Holtek HT80232 Holtek HT80229
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called ne2k-pci.
config [31mCONFIG_APNE[0m
tristate "PCMCIA NE2000 support"
depends on [31mCONFIG_AMIGA_PCMCIA[0m
select [31mCONFIG_CRC32[0m
---help---
If you have a [31mCONFIG_PCMCIA[0m [31mCONFIG_NE2000[0m compatible adapter, say Y. Otherwise,
say N.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called apne.
config [31mCONFIG_PCMCIA_PCNET[0m
tristate "NE2000 compatible PCMCIA support"
depends on [31mCONFIG_PCMCIA[0m
select [31mCONFIG_CRC32[0m
---help---
Say Y here if you intend to attach an [31mCONFIG_NE2000[0m compatible [31mCONFIG_PCMCIA[0m
(PC-card) Ethernet or Fast Ethernet card to your computer.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module will be
called pcnet_cs. If unsure, say N.
config [31mCONFIG_STNIC[0m
tristate "National DP83902AV support"
depends on [31mCONFIG_SUPERH[0m
select [31mCONFIG_CRC32[0m
---help---
Support for cards based on the National Semiconductor DP83902AV
ST-NIC Serial Network Interface Controller for Twisted Pair. This
is a 10Mbit/sec Ethernet controller. Product overview and specs at
<http://www.national.com/pf/DP/DP83902A.html>.
If unsure, say N.
config [31mCONFIG_ULTRA[0m
tristate "SMC Ultra support"
depends on [31mCONFIG_ISA[0m
select [31mCONFIG_CRC32[0m
---help---
If you have a network (Ethernet) card of this type, say Y here.
Important: There have been many reports that, with some motherboards
mixing an [31mCONFIG_SMC[0m Ultra and an Adaptec AHA154x [31mCONFIG_SCSI[0m card (or compatible,
such as some BusLogic models) causes corruption problems with many
operating systems. The Linux smc-ultra driver has a work-around for
this but keep it in mind if you have such a [31mCONFIG_SCSI[0m card and have
problems.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called smc-ultra.
config [31mCONFIG_WD80x3[0m
tristate "WD80*3 support"
depends on [31mCONFIG_ISA[0m
select [31mCONFIG_CRC32[0m
---help---
If you have a network (Ethernet) card of this type, say Y here.
To compile this driver as a module, choose [31mCONFIG_M[0m here. The module
will be called wd.
config [31mCONFIG_ZORRO8390[0m
tristate "Zorro NS8390-based Ethernet support"
depends on [31mCONFIG_ZORRO[0m
select [31mCONFIG_CRC32[0m
---help---
This driver is for Zorro Ethernet cards using an NS8390-compatible
chipset, like the Village Tronic Ariadne II and the Individual
Computers X-Surf Ethernet cards. If you have such a card, say Y.
Otherwise, say N.
To compile this driver as a module, choose [31mCONFIG_M[0m here: the module
will be called zorro8390.
endif # [31mCONFIG_NET_VENDOR_8390[0m