config [31mCONFIG_SND_SOC_TEGRA[0m
tristate "SoC Audio for the Tegra System-on-Chip"
depends on ([31mCONFIG_ARCH_TEGRA[0m && [31mCONFIG_TEGRA20_APB_DMA[0m) || [31mCONFIG_COMPILE_TEST[0m
depends on [31mCONFIG_COMMON_CLK[0m
depends on [31mCONFIG_RESET_CONTROLLER[0m
select [31mCONFIG_REGMAP_MMIO[0m
select [31mCONFIG_SND_SOC_GENERIC_DMAENGINE_PCM[0m
help
Say Y or [31mCONFIG_M[0m here if you want support for SoC audio on Tegra.
config [31mCONFIG_SND_SOC_TEGRA20_AC97[0m
tristate
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_AC97_BUS[0m
select [31mCONFIG_SND_SOC_TEGRA20_DAS[0m
help
Say Y or [31mCONFIG_M[0m if you want to add support for codecs attached to the
Tegra20 AC97 interface. You will also need to select the individual
machine drivers to support below.
config [31mCONFIG_SND_SOC_TEGRA20_DAS[0m
tristate
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
help
Say Y or [31mCONFIG_M[0m if you want to add support for the Tegra20 DAS module.
You will also need to select the individual machine drivers to
support below.
config [31mCONFIG_SND_SOC_TEGRA20_I2S[0m
tristate
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA20_DAS[0m
help
Say Y or [31mCONFIG_M[0m if you want to add support for codecs attached to the
Tegra20 I2S interface. You will also need to select the individual
machine drivers to support below.
config [31mCONFIG_SND_SOC_TEGRA20_SPDIF[0m
tristate
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
default m
help
Say Y or [31mCONFIG_M[0m if you want to add support for the Tegra20 SPDIF interface.
You will also need to select the individual machine drivers to support
below.
config [31mCONFIG_SND_SOC_TEGRA30_AHUB[0m
tristate
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
help
Say Y or [31mCONFIG_M[0m if you want to add support for the Tegra20 AHUB module.
You will also need to select the individual machine drivers to
support below.
config [31mCONFIG_SND_SOC_TEGRA30_I2S[0m
tristate
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_AHUB[0m
help
Say Y or [31mCONFIG_M[0m if you want to add support for codecs attached to the
Tegra30 I2S interface. You will also need to select the individual
machine drivers to support below.
config [31mCONFIG_SND_SOC_TEGRA_RT5640[0m
tristate "SoC Audio support for Tegra boards using an RT5640 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_I2S[0m if [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_RT5640[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the RT5640 codec, such as Dalmore.
config [31mCONFIG_SND_SOC_TEGRA_WM8753[0m
tristate "SoC Audio support for Tegra boards using a WM8753 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_I2S[0m if [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_WM8753[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the WM8753 codec, such as Whistler.
config [31mCONFIG_SND_SOC_TEGRA_WM8903[0m
tristate "SoC Audio support for Tegra boards using a WM8903 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_I2S[0m if [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_WM8903[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the WM8093 codec. Currently, the supported boards are
Harmony, Ventana, Seaboard, Kaen, and Aebl.
config [31mCONFIG_SND_SOC_TEGRA_WM9712[0m
tristate "SoC Audio support for Tegra boards using a WM9712 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_ARCH_TEGRA_2x_SOC[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_AC97[0m
select [31mCONFIG_SND_SOC_WM9712[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the WM9712 (or compatible) codec.
config [31mCONFIG_SND_SOC_TEGRA_TRIMSLICE[0m
tristate "SoC Audio support for TrimSlice board"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TLV320AIC23_I2C[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on the
TrimSlice platform.
config [31mCONFIG_SND_SOC_TEGRA_ALC5632[0m
tristate "SoC Audio support for Tegra boards using an ALC5632 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_ALC5632[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on the
Toshiba AC100 netbook.
config [31mCONFIG_SND_SOC_TEGRA_MAX98090[0m
tristate "SoC Audio support for Tegra boards using a MAX98090 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_I2S[0m if [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_MAX98090[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the MAX98090 codec, such as Venice2.
config [31mCONFIG_SND_SOC_TEGRA_RT5677[0m
tristate "SoC Audio support for Tegra boards using a RT5677 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_I2S[0m if [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_RT5677[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the RT5677 codec, such as Ryu.
config [31mCONFIG_SND_SOC_TEGRA_SGTL5000[0m
tristate "SoC Audio support for Tegra boards using a SGTL5000 codec"
depends on [31mCONFIG_SND_SOC_TEGRA[0m && [31mCONFIG_I2C[0m && [31mCONFIG_GPIOLIB[0m
select [31mCONFIG_SND_SOC_TEGRA20_I2S[0m if [31mCONFIG_ARCH_TEGRA_2x_SOC[0m
select [31mCONFIG_SND_SOC_TEGRA30_I2S[0m if [31mCONFIG_ARCH_TEGRA_3x_SOC[0m
select [31mCONFIG_SND_SOC_SGTL5000[0m
help
Say Y or [31mCONFIG_M[0m here if you want to add support for SoC audio on Tegra
boards using the SGTL5000 codec, such as Apalis T30, Apalis TK1 or
Colibri T30.