/*
* omap3-n950-n9.dtsi - Device Tree file for Nokia N950 & N9 (common stuff)
*
* Written by: Aaro Koskinen <aaro.koskinen@iki.fi>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "omap36xx.dtsi"
/ {
cpus {
cpu@0 {
cpu0-supply = <&vcc>;
operating-points = <
/* kHz uV */
300000 1012500
600000 1200000
800000 1325000
1000000 1375000
>;
};
};
memory@80000000 {
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
vemmc: fixedregulator0 {
compatible = "regulator-fixed";
regulator-name = "VEMMC";
regulator-min-microvolt = <2900000>;
regulator-max-microvolt = <2900000>;
gpio = <&gpio5 29 GPIO_ACTIVE_HIGH>; /* gpio line 157 */
startup-delay-us = <150>;
enable-active-high;
};
vwlan_fixed: fixedregulator2 {
compatible = "regulator-fixed";
regulator-name = "VWLAN";
gpio = <&gpio2 3 GPIO_ACTIVE_HIGH>; /* gpio 35 */
enable-active-high;
regulator-boot-off;
};
leds {
compatible = "gpio-leds";
heartbeat {
label = "debug::sleep";
gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; /* gpio92 */
linux,default-trigger = "default-on";
pinctrl-names = "default";
pinctrl-0 = <&debug_leds>;
};
};
};
&omap3_pmx_core {
accelerator_pins: pinmux_accelerator_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x21da, PIN_INPUT | MUX_MODE4) /* mcspi2_somi.gpio_180 -> LIS302 INT1 */
OMAP3_CORE1_IOPAD(0x21dc, PIN_INPUT | MUX_MODE4) /* mcspi2_cs0.gpio_181 -> LIS302 INT2 */
>;
};
debug_leds: pinmux_debug_led_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE4) /* dss_data22.gpio_92 */
>;
};
mmc2_pins: pinmux_mmc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_clk */
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_cmd */
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat0 */
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat1 */
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat2 */
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc2_dat3 */
>;
};
wlan_pins: pinmux_wlan_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE4) /* gpio 35 - wlan enable */
OMAP3_CORE1_IOPAD(0x208a, PIN_INPUT | MUX_MODE4) /* gpio 42 - wlan irq */
>;
};
ssi_pins: pinmux_ssi_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE1) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE1) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLUP | MUX_MODE1) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE1) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE1) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE1) /* ssi1_rdy_rx */
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE1) /* ssi1_wake */
>;
};
ssi_pins_idle: pinmux_ssi_pins_idle {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE7) /* ssi1_dat_tx */
OMAP3_CORE1_IOPAD(0x217e, PIN_OUTPUT | MUX_MODE7) /* ssi1_flag_tx */
OMAP3_CORE1_IOPAD(0x2180, PIN_INPUT_PULLDOWN | MUX_MODE7) /* ssi1_rdy_tx */
OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE4) /* ssi1_wake_tx (cawake) */
OMAP3_CORE1_IOPAD(0x2184, PIN_INPUT | MUX_MODE7) /* ssi1_dat_rx */
OMAP3_CORE1_IOPAD(0x2186, PIN_INPUT | MUX_MODE7) /* ssi1_flag_rx */
OMAP3_CORE1_IOPAD(0x2188, PIN_OUTPUT | MUX_MODE4) /* ssi1_rdy_rx */
OMAP3_CORE1_IOPAD(0x218a, PIN_OUTPUT | MUX_MODE7) /* ssi1_wake */
>;
};
modem_pins1: pinmux_modem_core1_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x207a, PIN_INPUT | MUX_MODE4) /* gpio_34 (ape_rst_rq) */
OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE4) /* gpio_88 (cmt_rst_rq) */
OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE4) /* gpio_93 (cmt_apeslpx) */
>;
};
};
&omap3_pmx_core2 {
modem_pins2: pinmux_modem_core2_pins {
pinctrl-single,pins = <
OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* gpio_23 (cmt_en) */
>;
};
};
&i2c1 {
clock-frequency = <2900000>;
twl: twl@48 {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
};
};
/include/ "twl4030.dtsi"
&twl {
compatible = "ti,twl5031";
twl_power: power {
compatible = "ti,twl4030-power";
ti,use_poweroff;
};
};
&twl_gpio {
ti,pullups = <0x000001>; /* BIT(0) */
ti,pulldowns = <0x008106>; /* BIT(1) | BIT(2) | BIT(8) | BIT(15) */
};
&vdac {
regulator-name = "vdac";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vpll1 {
regulator-name = "vpll1";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vpll2 {
regulator-name = "vpll2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vaux1 {
regulator-name = "vaux1";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
/* CSI-2 receiver */
&vaux2 {
regulator-name = "vaux2";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
/* Cameras */
&vaux3 {
regulator-name = "vaux3";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
&vaux4 {
regulator-name = "vaux4";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
};
&vmmc1 {
regulator-name = "vmmc1";
regulator-min-microvolt = <1850000>;
regulator-max-microvolt = <3150000>;
};
&vmmc2 {
regulator-name = "vmmc2";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
};
&vintana1 {
regulator-name = "vintana1";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
};
&vintana2 {
regulator-name = "vintana2";
regulator-min-microvolt = <2750000>;
regulator-max-microvolt = <2750000>;
};
&vintdig {
regulator-name = "vintdig";
regulator-min-microvolt = <1500000>;
regulator-max-microvolt = <1500000>;
};
&vsim {
regulator-name = "vsim";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&vio {
regulator-name = "vio";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
&i2c2 {
clock-frequency = <400000>;
};
&i2c3 {
clock-frequency = <400000>;
lis302: lis302@1d {
compatible = "st,lis3lv02d";
reg = <0x1d>;
Vdd-supply = <&vaux1>;
Vdd_IO-supply = <&vio>;
pinctrl-names = "default";
pinctrl-0 = <&accelerator_pins>;
interrupts-extended = <&gpio6 20 IRQ_TYPE_EDGE_FALLING>, <&gpio6 21 IRQ_TYPE_EDGE_FALLING>; /* 180, 181 */
/* click flags */
st,click-single-x;
st,click-single-y;
st,click-single-z;
/* Limits are 0.5g * value */
st,click-threshold-x = <8>;
st,click-threshold-y = <8>;
st,click-threshold-z = <10>;
/* Click must be longer than time limit */
st,click-time-limit = <9>;
/* Kind of debounce filter */
st,click-latency = <50>;
st,wakeup-x-hi;
st,wakeup-y-hi;
st,wakeup-threshold = <(800/18)>; /* millig-value / 18 to get HW values */
st,wakeup2-z-hi;
st,wakeup2-threshold = <(1000/18)>; /* millig-value / 18 to get HW values */
st,highpass-cutoff-hz = <2>;
/* Interrupt line 1 for thresholds */
st,irq1-ff-wu-1;
st,irq1-ff-wu-2;
/* Interrupt line 2 for click detection */
st,irq2-click;
st,wu-duration-1 = <8>;
st,wu-duration-2 = <8>;
};
};
&mmc1 {
status = "disabled";
};
&mmc2 {
pinctrl-names = "default";
pinctrl-0 = <&mmc2_pins>;
vmmc-supply = <&vemmc>;
bus-width = <4>;
ti,non-removable;
};
&mmc3 {
status = "disabled";
};
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
phys = <&usb2_phy>;
phy-names = "usb2-phy";
mode = <3>;
power = <50>;
};
&gpmc {
ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
gpmc,burst-length = <16>;
gpmc,burst-read;
gpmc,burst-wrap;
gpmc,burst-write;
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
gpmc,cs-on-ns = <0>;
gpmc,cs-rd-off-ns = <87>;
gpmc,cs-wr-off-ns = <87>;
gpmc,adv-on-ns = <0>;
gpmc,adv-rd-off-ns = <10>;
gpmc,adv-wr-off-ns = <10>;
gpmc,oe-on-ns = <15>;
gpmc,oe-off-ns = <87>;
gpmc,we-on-ns = <0>;
gpmc,we-off-ns = <87>;
gpmc,rd-cycle-ns = <112>;
gpmc,wr-cycle-ns = <112>;
gpmc,access-ns = <81>;
gpmc,page-burst-access-ns = <15>;
gpmc,bus-turnaround-ns = <0>;
gpmc,cycle2cycle-delay-ns = <0>;
gpmc,wait-monitoring-ns = <0>;
gpmc,clk-activation-ns = <5>;
gpmc,wr-data-mux-bus-ns = <30>;
gpmc,wr-access-ns = <81>;
gpmc,sync-clk-ps = <15000>;
/*
* MTD partition table corresponding to Nokia's MeeGo 1.2
* Harmattan release.
*/
partition@0 {
label = "bootloader";
reg = <0x00000000 0x00100000>;
};
partition@1 {
label = "config";
reg = <0x00100000 0x002c0000>;
};
partition@2 {
label = "kernel";
reg = <0x003c0000 0x01000000>;
};
partition@3 {
label = "log";
reg = <0x013c0000 0x00200000>;
};
partition@4 {
label = "var";
reg = <0x015c0000 0x1ca40000>;
};
partition@5 {
label = "moslo";
reg = <0x1e000000 0x02000000>;
};
partition@6 {
label = "omap2-onenand";
reg = <0x00000000 0x20000000>;
};
};
};
&ssi_port1 {
pinctrl-names = "default", "idle";
pinctrl-0 = <&ssi_pins>;
pinctrl-1 = <&ssi_pins_idle>;
ti,ssi-cawake-gpio = <&gpio5 23 GPIO_ACTIVE_HIGH>; /* 151 */
modem: hsi-client {
pinctrl-names = "default";
pinctrl-0 = <&modem_pins1 &modem_pins2>;
hsi-channel-ids = <0>, <1>, <2>, <3>;
hsi-channel-names = "mcsaab-control",
"speech-control",
"speech-data",
"mcsaab-data";
hsi-speed-kbps = <96000>;
hsi-mode = "frame";
hsi-flow = "synchronized";
hsi-arb-mode = "round-robin";
interrupts-extended = <&gpio2 2 IRQ_TYPE_EDGE_RISING>; /* gpio 34 */
gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>, /* gpio 93 */
<&gpio3 24 GPIO_ACTIVE_HIGH>, /* gpio 88 */
<&gpio1 23 GPIO_ACTIVE_HIGH>; /* gpio 23 */
gpio-names = "cmt_apeslpx",
"cmt_rst_rq",
"cmt_en";
};
};
&ssi_port2 {
status = "disabled";
};