/*
* Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "skeleton.dtsi"
#include "armv7-m.dtsi"
#include <dt-bindings/pinctrl/stm32f746-pinfunc.h>
/ {
clocks {
clk_hse: clk-hse {
#clock-cells = <0>;
compatible = "fixed-clock";
clock-frequency = <0>;
};
};
soc {
timer2: timer@40000000 {
compatible = "st,stm32-timer";
reg = <0x40000000 0x400>;
interrupts = <28>;
clocks = <&rcc 0 128>;
status = "disabled";
};
timer3: timer@40000400 {
compatible = "st,stm32-timer";
reg = <0x40000400 0x400>;
interrupts = <29>;
clocks = <&rcc 0 129>;
status = "disabled";
};
timer4: timer@40000800 {
compatible = "st,stm32-timer";
reg = <0x40000800 0x400>;
interrupts = <30>;
clocks = <&rcc 0 130>;
status = "disabled";
};
timer5: timer@40000c00 {
compatible = "st,stm32-timer";
reg = <0x40000c00 0x400>;
interrupts = <50>;
clocks = <&rcc 0 131>;
};
timer6: timer@40001000 {
compatible = "st,stm32-timer";
reg = <0x40001000 0x400>;
interrupts = <54>;
clocks = <&rcc 0 132>;
status = "disabled";
};
timer7: timer@40001400 {
compatible = "st,stm32-timer";
reg = <0x40001400 0x400>;
interrupts = <55>;
clocks = <&rcc 0 133>;
status = "disabled";
};
usart2: serial@40004400 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40004400 0x400>;
interrupts = <38>;
clocks = <&rcc 0 145>;
status = "disabled";
};
usart3: serial@40004800 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40004800 0x400>;
interrupts = <39>;
clocks = <&rcc 0 146>;
status = "disabled";
};
usart4: serial@40004c00 {
compatible = "st,stm32f7-uart";
reg = <0x40004c00 0x400>;
interrupts = <52>;
clocks = <&rcc 0 147>;
status = "disabled";
};
usart5: serial@40005000 {
compatible = "st,stm32f7-uart";
reg = <0x40005000 0x400>;
interrupts = <53>;
clocks = <&rcc 0 148>;
status = "disabled";
};
usart7: serial@40007800 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40007800 0x400>;
interrupts = <82>;
clocks = <&rcc 0 158>;
status = "disabled";
};
usart8: serial@40007c00 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40007c00 0x400>;
interrupts = <83>;
clocks = <&rcc 0 159>;
status = "disabled";
};
usart1: serial@40011000 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011000 0x400>;
interrupts = <37>;
clocks = <&rcc 0 164>;
status = "disabled";
};
usart6: serial@40011400 {
compatible = "st,stm32f7-usart", "st,stm32f7-uart";
reg = <0x40011400 0x400>;
interrupts = <71>;
clocks = <&rcc 0 165>;
status = "disabled";
};
syscfg: system-config@40013800 {
compatible = "syscon";
reg = <0x40013800 0x400>;
};
exti: interrupt-controller@40013c00 {
compatible = "st,stm32-exti";
interrupt-controller;
#interrupt-cells = <2>;
reg = <0x40013C00 0x400>;
interrupts = <1>, <2>, <3>, <6>, <7>, <8>, <9>, <10>, <23>, <40>, <41>, <42>, <62>, <76>;
};
pin-controller {
#address-cells = <1>;
#size-cells = <1>;
compatible = "st,stm32f746-pinctrl";
ranges = <0 0x40020000 0x3000>;
interrupt-parent = <&exti>;
st,syscfg = <&syscfg 0x8>;
pins-are-numbered;
gpioa: gpio@40020000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x0 0x400>;
clocks = <&rcc 0 256>;
st,bank-name = "GPIOA";
};
gpiob: gpio@40020400 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x400 0x400>;
clocks = <&rcc 0 257>;
st,bank-name = "GPIOB";
};
gpioc: gpio@40020800 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x800 0x400>;
clocks = <&rcc 0 258>;
st,bank-name = "GPIOC";
};
gpiod: gpio@40020c00 {
gpio-controller;
#gpio-cells = <2>;
reg = <0xc00 0x400>;
clocks = <&rcc 0 259>;
st,bank-name = "GPIOD";
};
gpioe: gpio@40021000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1000 0x400>;
clocks = <&rcc 0 260>;
st,bank-name = "GPIOE";
};
gpiof: gpio@40021400 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1400 0x400>;
clocks = <&rcc 0 261>;
st,bank-name = "GPIOF";
};
gpiog: gpio@40021800 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1800 0x400>;
clocks = <&rcc 0 262>;
st,bank-name = "GPIOG";
};
gpioh: gpio@40021c00 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x1c00 0x400>;
clocks = <&rcc 0 263>;
st,bank-name = "GPIOH";
};
gpioi: gpio@40022000 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2000 0x400>;
clocks = <&rcc 0 264>;
st,bank-name = "GPIOI";
};
gpioj: gpio@40022400 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2400 0x400>;
clocks = <&rcc 0 265>;
st,bank-name = "GPIOJ";
};
gpiok: gpio@40022800 {
gpio-controller;
#gpio-cells = <2>;
reg = <0x2800 0x400>;
clocks = <&rcc 0 266>;
st,bank-name = "GPIOK";
};
usart1_pins_a: usart1@0 {
pins1 {
pinmux = <STM32F746_PA9_FUNC_USART1_TX>;
bias-disable;
drive-push-pull;
slew-rate = <0>;
};
pins2 {
pinmux = <STM32F746_PA10_FUNC_USART1_RX>;
bias-disable;
};
};
};
rcc: rcc@40023800 {
#clock-cells = <2>;
compatible = "st,stm32f42xx-rcc", "st,stm32-rcc";
reg = <0x40023800 0x400>;
clocks = <&clk_hse>;
};
};
};
&systick {
clocks = <&rcc 1 0>;
status = "okay";
};