/**
 * Copyright (c) 2010-2012 Broadcom. All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions, and the following disclaimer,
 *    without modification.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The names of the above-listed copyright holders may not be used
 *    to endorse or promote products derived from this software without
 *    specific prior written permission.
 *
 * ALTERNATIVELY, this software may be distributed under the terms of the
 * GNU General Public License ("GPL") version 2, as published by the Free
 * Software Foundation.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
 * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
 * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
 * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef VCHI_CFG_H_
#define VCHI_CFG_H_

/****************************************************************************************
 * Defines in this first section are part of the VCHI API and may be examined by VCHI
 * services.
 ***************************************************************************************/

/* Required alignment of base addresses for bulk transfer, if unaligned transfers are not enabled */
/* Really determined by the message driver, and should be available from a run-time call. */
#ifndef VCHI_BULK_ALIGN
#   if __VCCOREVER__ >= 0x04000000
#       define VCHI_BULK_ALIGN 32 // Allows for the need to do cache cleans
#   else
#       define VCHI_BULK_ALIGN 16
#   endif
#endif

/* Required length multiple for bulk transfers, if unaligned transfers are not enabled */
/* May be less than or greater than VCHI_BULK_ALIGN */
/* Really determined by the message driver, and should be available from a run-time call. */
#ifndef VCHI_BULK_GRANULARITY
#   if __VCCOREVER__ >= 0x04000000
#       define VCHI_BULK_GRANULARITY 32 // Allows for the need to do cache cleans
#   else
#       define VCHI_BULK_GRANULARITY 16
#   endif
#endif

/* The largest possible message to be queued with vchi_msg_queue. */
#ifndef VCHI_MAX_MSG_SIZE
#   if defined VCHI_LOCAL_HOST_PORT
#       define VCHI_MAX_MSG_SIZE     16384         // makes file transfers fast, but should they be using bulk?
#   else
#       define VCHI_MAX_MSG_SIZE      4096 // NOTE: THIS MUST BE LARGER THAN OR EQUAL TO THE SIZE OF THE KHRONOS MERGE BUFFER!!
#   endif
#endif

/******************************************************************************************
 * Defines below are system configuration options, and should not be used by VCHI services.
 *****************************************************************************************/

/* How many connections can we support? A localhost implementation uses 2 connections,
 * 1 for host-app, 1 for VMCS, and these are hooked together by a loopback MPHI VCFW
 * driver. */
#ifndef VCHI_MAX_NUM_CONNECTIONS
#   define VCHI_MAX_NUM_CONNECTIONS 3
#endif

/* How many services can we open per connection? Extending this doesn't cost processing time, just a small
 * amount of static memory. */
#ifndef VCHI_MAX_SERVICES_PER_CONNECTION
#  define VCHI_MAX_SERVICES_PER_CONNECTION 36
#endif

/* Adjust if using a message driver that supports more logical TX channels */
#ifndef VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION
#   define VCHI_MAX_BULK_TX_CHANNELS_PER_CONNECTION 9 // 1 MPHI + 8 CCP2 logical channels
#endif

/* Adjust if using a message driver that supports more logical RX channels */
#ifndef VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION
#   define VCHI_MAX_BULK_RX_CHANNELS_PER_CONNECTION 1 // 1 MPHI
#endif

/* How many receive slots do we use. This times VCHI_MAX_MSG_SIZE gives the effective
 * receive queue space, less message headers. */
#ifndef VCHI_NUM_READ_SLOTS
#  if defined(VCHI_LOCAL_HOST_PORT)
#     define VCHI_NUM_READ_SLOTS 4
#  else
#     define VCHI_NUM_READ_SLOTS 48
#  endif
#endif

/* Do we utilise overrun facility for receive message slots? Can aid peer transmit
 * performance. Only define on VideoCore end, talking to host.
 */
//#define VCHI_MSG_RX_OVERRUN

/* How many transmit slots do we use. Generally don't need many, as the hardware driver
 * underneath VCHI will usually have its own buffering. */
#ifndef VCHI_NUM_WRITE_SLOTS
#  define VCHI_NUM_WRITE_SLOTS 4
#endif

/* If a service has held or queued received messages in VCHI_XOFF_THRESHOLD or more slots,
 * then it's taking up too much buffer space, and the peer service will be told to stop
 * transmitting with an XOFF message. For this to be effective, the VCHI_NUM_READ_SLOTS
 * needs to be considerably bigger than VCHI_NUM_WRITE_SLOTS, or the transmit latency
 * is too high. */
#ifndef VCHI_XOFF_THRESHOLD
#  define VCHI_XOFF_THRESHOLD (VCHI_NUM_READ_SLOTS / 2)
#endif

/* After we've sent an XOFF, the peer will be told to resume transmission once the local
 * service has dequeued/released enough messages that it's now occupying
 * VCHI_XON_THRESHOLD slots or fewer. */
#ifndef VCHI_XON_THRESHOLD
#  define VCHI_XON_THRESHOLD (VCHI_NUM_READ_SLOTS / 4)
#endif

/* A size below which a bulk transfer omits the handshake completely and always goes
 * via the message channel, if bulk auxiliary is being sent on that service. (The user
 * can guarantee this by enabling unaligned transmits).
 * Not API. */
#ifndef VCHI_MIN_BULK_SIZE
#  define VCHI_MIN_BULK_SIZE    ( VCHI_MAX_MSG_SIZE / 2 < 4096 ? VCHI_MAX_MSG_SIZE / 2 : 4096 )
#endif

/* Maximum size of bulk transmission chunks, for each interface type. A trade-off between
 * speed and latency; the smaller the chunk size the better change of messages and other
 * bulk transmissions getting in when big bulk transfers are happening. Set to 0 to not
 * break transmissions into chunks.
 */
#ifndef VCHI_MAX_BULK_CHUNK_SIZE_MPHI
#  define VCHI_MAX_BULK_CHUNK_SIZE_MPHI (16 * 1024)
#endif

/* NB Chunked CCP2 transmissions violate the letter of the CCP2 spec by using "JPEG8" mode
 * with multiple-line frames. Only use if the receiver can cope. */
#ifndef VCHI_MAX_BULK_CHUNK_SIZE_CCP2
#  define VCHI_MAX_BULK_CHUNK_SIZE_CCP2 0
#endif

/* How many TX messages can we have pending in our transmit slots. Once exhausted,
 * vchi_msg_queue will be blocked. */
#ifndef VCHI_TX_MSG_QUEUE_SIZE
#  define VCHI_TX_MSG_QUEUE_SIZE           256
#endif

/* How many RX messages can we have parsed in the receive slots. Once exhausted, parsing
 * will be suspended until older messages are dequeued/released. */
#ifndef VCHI_RX_MSG_QUEUE_SIZE
#  define VCHI_RX_MSG_QUEUE_SIZE           256
#endif

/* Really should be able to cope if we run out of received message descriptors, by
 * suspending parsing as the comment above says, but we don't. This sweeps the issue
 * under the carpet. */
#if VCHI_RX_MSG_QUEUE_SIZE < (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
#  undef VCHI_RX_MSG_QUEUE_SIZE
#  define VCHI_RX_MSG_QUEUE_SIZE (VCHI_MAX_MSG_SIZE/16 + 1) * VCHI_NUM_READ_SLOTS
#endif

/* How many bulk transmits can we have pending. Once exhausted, vchi_bulk_queue_transmit
 * will be blocked. */
#ifndef VCHI_TX_BULK_QUEUE_SIZE
#  define VCHI_TX_BULK_QUEUE_SIZE           64
#endif

/* How many bulk receives can we have pending. Once exhausted, vchi_bulk_queue_receive
 * will be blocked. */
#ifndef VCHI_RX_BULK_QUEUE_SIZE
#  define VCHI_RX_BULK_QUEUE_SIZE           64
#endif

/* A limit on how many outstanding bulk requests we expect the peer to give us. If
 * the peer asks for more than this, VCHI will fail and assert. The number is determined
 * by the peer's hardware - it's the number of outstanding requests that can be queued
 * on all bulk channels. VC3's MPHI peripheral allows 16. */
#ifndef VCHI_MAX_PEER_BULK_REQUESTS
#  define VCHI_MAX_PEER_BULK_REQUESTS       32
#endif

/* Define VCHI_CCP2TX_MANUAL_POWER if the host tells us when to turn the CCP2
 * transmitter on and off.
 */
/*#define VCHI_CCP2TX_MANUAL_POWER*/

#ifndef VCHI_CCP2TX_MANUAL_POWER

/* Timeout (in milliseconds) for putting the CCP2TX interface into IDLE state. Set
 * negative for no IDLE.
 */
#  ifndef VCHI_CCP2TX_IDLE_TIMEOUT
#    define VCHI_CCP2TX_IDLE_TIMEOUT        5
#  endif

/* Timeout (in milliseconds) for putting the CCP2TX interface into OFF state. Set
 * negative for no OFF.
 */
#  ifndef VCHI_CCP2TX_OFF_TIMEOUT
#    define VCHI_CCP2TX_OFF_TIMEOUT         1000
#  endif

#endif /* VCHI_CCP2TX_MANUAL_POWER */

#endif /* VCHI_CFG_H_ */

/****************************** End of file **********************************/