Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

Open Menu /arch/mn10300/proc-mn103e010/include/proc/dmactl-regs.h 
  1
  2
  3
  4
  5
  6
  7
  8
  9
 10
 11
 12
 13
 14
 15
 16
 17
 18
 19
 20
 21
 22
 23
 24
 25
 26
 27
 28
 29
 30
 31
 32
 33
 34
 35
 36
 37
 38
 39
 40
 41
 42
 43
 44
 45
 46
 47
 48
 49
 50
 51
 52
 53
 54
 55
 56
 57
 58
 59
 60
 61
 62
 63
 64
 65
 66
 67
 68
 69
 70
 71
 72
 73
 74
 75
 76
 77
 78
 79
 80
 81
 82
 83
 84
 85
 86
 87
 88
 89
 90
 91
 92
 93
 94
 95
 96
 97
 98
 99
100
101
102
/* MN103E010 on-board DMA controller registers
 *
 * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
 * Written by David Howells (dhowells@redhat.com)
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public Licence
 * as published by the Free Software Foundation; either version
 * 2 of the Licence, or (at your option) any later version.
 */

#ifndef _ASM_PROC_DMACTL_REGS_H
#define _ASM_PROC_DMACTL_REGS_H

#include <asm/cpu-regs.h>

#ifdef __KERNEL__

/* DMA registers */
#define	DMxCTR(N)		__SYSREG(0xd2000000 + ((N) * 0x100), u32)	/* control reg */
#define	DMxCTR_BG		0x0000001f	/* transfer request source */
#define	DMxCTR_BG_SOFT		0x00000000	/* - software source */
#define	DMxCTR_BG_SC0TX		0x00000002	/* - serial port 0 transmission */
#define	DMxCTR_BG_SC0RX		0x00000003	/* - serial port 0 reception */
#define	DMxCTR_BG_SC1TX		0x00000004	/* - serial port 1 transmission */
#define	DMxCTR_BG_SC1RX		0x00000005	/* - serial port 1 reception */
#define	DMxCTR_BG_SC2TX		0x00000006	/* - serial port 2 transmission */
#define	DMxCTR_BG_SC2RX		0x00000007	/* - serial port 2 reception */
#define	DMxCTR_BG_TM0UFLOW	0x00000008	/* - timer 0 underflow */
#define	DMxCTR_BG_TM1UFLOW	0x00000009	/* - timer 1 underflow */
#define	DMxCTR_BG_TM2UFLOW	0x0000000a	/* - timer 2 underflow */
#define	DMxCTR_BG_TM3UFLOW	0x0000000b	/* - timer 3 underflow */
#define	DMxCTR_BG_TM6ACMPCAP	0x0000000c	/* - timer 6A compare/capture */
#define	DMxCTR_BG_AFE		0x0000000d	/* - analogue front-end interrupt source */
#define	DMxCTR_BG_ADC		0x0000000e	/* - A/D conversion end interrupt source */
#define	DMxCTR_BG_IRDA		0x0000000f	/* - IrDA interrupt source */
#define	DMxCTR_BG_RTC		0x00000010	/* - RTC interrupt source */
#define	DMxCTR_BG_XIRQ0		0x00000011	/* - XIRQ0 pin interrupt source */
#define	DMxCTR_BG_XIRQ1		0x00000012	/* - XIRQ1 pin interrupt source */
#define	DMxCTR_BG_XDMR0		0x00000013	/* - external request 0 source (XDMR0 pin) */
#define	DMxCTR_BG_XDMR1		0x00000014	/* - external request 1 source (XDMR1 pin) */
#define	DMxCTR_SAM		0x000000e0	/* DMA transfer src addr mode */
#define	DMxCTR_SAM_INCR		0x00000000	/* - increment */
#define	DMxCTR_SAM_DECR		0x00000020	/* - decrement */
#define	DMxCTR_SAM_FIXED	0x00000040	/* - fixed */
#define	DMxCTR_DAM		0x00000000	/* DMA transfer dest addr mode */
#define	DMxCTR_DAM_INCR		0x00000000	/* - increment */
#define	DMxCTR_DAM_DECR		0x00000100	/* - decrement */
#define	DMxCTR_DAM_FIXED	0x00000200	/* - fixed */
#define	DMxCTR_TM		0x00001800	/* DMA transfer mode */
#define	DMxCTR_TM_BATCH		0x00000000	/* - batch transfer */
#define	DMxCTR_TM_INTERM	0x00001000	/* - intermittent transfer */
#define	DMxCTR_UT		0x00006000	/* DMA transfer unit */
#define	DMxCTR_UT_1		0x00000000	/* - 1 byte */
#define	DMxCTR_UT_2		0x00002000	/* - 2 byte */
#define	DMxCTR_UT_4		0x00004000	/* - 4 byte */
#define	DMxCTR_UT_16		0x00006000	/* - 16 byte */
#define	DMxCTR_TEN		0x00010000	/* DMA channel transfer enable */
#define	DMxCTR_RQM		0x00060000	/* external request input source mode */
#define	DMxCTR_RQM_FALLEDGE	0x00000000	/* - falling edge */
#define	DMxCTR_RQM_RISEEDGE	0x00020000	/* - rising edge */
#define	DMxCTR_RQM_LOLEVEL	0x00040000	/* - low level */
#define	DMxCTR_RQM_HILEVEL	0x00060000	/* - high level */
#define	DMxCTR_RQF		0x01000000	/* DMA transfer request flag */
#define	DMxCTR_XEND		0x80000000	/* DMA transfer end flag */

#define	DMxSRC(N)		__SYSREG(0xd2000004 + ((N) * 0x100), u32)	/* control reg */

#define	DMxDST(N)		__SYSREG(0xd2000008 + ((N) * 0x100), u32)	/* src addr reg */

#define	DMxSIZ(N)		__SYSREG(0xd200000c + ((N) * 0x100), u32)	/* dest addr reg */
#define DMxSIZ_CT		0x000fffff	/* number of bytes to transfer */

#define	DMxCYC(N)		__SYSREG(0xd2000010 + ((N) * 0x100), u32)	/* intermittent
										 * size reg */
#define DMxCYC_CYC		0x000000ff	/* number of interrmittent transfers -1 */

#define DM0IRQ			16		/* DMA channel 0 complete IRQ */
#define DM1IRQ			17		/* DMA channel 1 complete IRQ */
#define DM2IRQ			18		/* DMA channel 2 complete IRQ */
#define DM3IRQ			19		/* DMA channel 3 complete IRQ */

#define	DM0ICR			GxICR(DM0IRQ)	/* DMA channel 0 complete intr ctrl reg */
#define	DM1ICR			GxICR(DM0IR1)	/* DMA channel 1 complete intr ctrl reg */
#define	DM2ICR			GxICR(DM0IR2)	/* DMA channel 2 complete intr ctrl reg */
#define	DM3ICR			GxICR(DM0IR3)	/* DMA channel 3 complete intr ctrl reg */

#ifndef __ASSEMBLY__

struct mn10300_dmactl_regs {
	u32		ctr;
	const void	*src;
	void		*dst;
	u32		siz;
	u32		cyc;
} __attribute__((aligned(0x100)));

#endif /* __ASSEMBLY__ */

#endif /* __KERNEL__ */

#endif /* _ASM_PROC_DMACTL_REGS_H */