/*
* arch/sh/kernel/cpu/sh5/entry.S
*
* Copyright (C) 2000, 2001 Paolo Alberelli
* Copyright (C) 2004 - 2008 Paul Mundt
* Copyright (C) 2003, 2004 Richard Curnow
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/sys.h>
#include <cpu/registers.h>
#include <asm/processor.h>
#include <asm/unistd.h>
#include <asm/thread_info.h>
#include <asm/asm-offsets.h>
/*
* SR fields.
*/
#define SR_ASID_MASK 0x00ff0000
#define SR_FD_MASK 0x00008000
#define SR_SS 0x08000000
#define SR_BL 0x10000000
#define SR_MD 0x40000000
/*
* Event code.
*/
#define EVENT_INTERRUPT 0
#define EVENT_FAULT_TLB 1
#define EVENT_FAULT_NOT_TLB 2
#define EVENT_DEBUG 3
/* EXPEVT values */
#define RESET_CAUSE 0x20
#define DEBUGSS_CAUSE 0x980
/*
* Frame layout. Quad index.
*/
#define FRAME_T(x) FRAME_TBASE+(x*8)
#define FRAME_R(x) FRAME_RBASE+(x*8)
#define FRAME_S(x) FRAME_SBASE+(x*8)
#define FSPC 0
#define FSSR 1
#define FSYSCALL_ID 2
/* Arrange the save frame to be a multiple of 32 bytes long */
#define FRAME_SBASE 0
#define FRAME_RBASE (FRAME_SBASE+(3*8)) /* SYSCALL_ID - SSR - SPC */
#define FRAME_TBASE (FRAME_RBASE+(63*8)) /* r0 - r62 */
#define FRAME_PBASE (FRAME_TBASE+(8*8)) /* tr0 -tr7 */
#define FRAME_SIZE (FRAME_PBASE+(2*8)) /* pad0-pad1 */
#define FP_FRAME_SIZE FP_FRAME_BASE+(33*8) /* dr0 - dr31 + fpscr */
#define FP_FRAME_BASE 0
#define SAVED_R2 0*8
#define SAVED_R3 1*8
#define SAVED_R4 2*8
#define SAVED_R5 3*8
#define SAVED_R18 4*8
#define SAVED_R6 5*8
#define SAVED_TR0 6*8
/* These are the registers saved in the TLB path that aren't saved in the first
level of the normal one. */
#define TLB_SAVED_R25 7*8
#define TLB_SAVED_TR1 8*8
#define TLB_SAVED_TR2 9*8
#define TLB_SAVED_TR3 10*8
#define TLB_SAVED_TR4 11*8
/* Save R0/R1 : PT-migrating compiler currently dishounours -ffixed-r0 and -ffixed-r1 causing
breakage otherwise. */
#define TLB_SAVED_R0 12*8
#define TLB_SAVED_R1 13*8
#define CLI() \
getcon SR, r6; \
ori r6, 0xf0, r6; \
putcon r6, SR;
#define STI() \
getcon SR, r6; \
andi r6, ~0xf0, r6; \
putcon r6, SR;
#ifdef [31mCONFIG_PREEMPT[0m
# define preempt_stop() CLI()
#else
# define preempt_stop()
# define resume_kernel restore_all
#endif
.section .data, "aw"
#define FAST_TLBMISS_STACK_CACHELINES 4
#define FAST_TLBMISS_STACK_QUADWORDS (4*FAST_TLBMISS_STACK_CACHELINES)
/* Register back-up area for all exceptions */
.balign 32
/* Allow for 16 quadwords to be pushed by fast tlbmiss handling
* register saves etc. */
.fill FAST_TLBMISS_STACK_QUADWORDS, 8, 0x0
/* This is 32 byte aligned by construction */
/* Register back-up area for all exceptions */
reg_save_area:
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
/* Save area for RESVEC exceptions. We cannot use reg_save_area because of
* reentrancy. Note this area may be accessed via physical address.
* Align so this fits a whole single cache line, for ease of purging.
*/
.balign 32,0,32
resvec_save_area:
.quad 0
.quad 0
.quad 0
.quad 0
.quad 0
.balign 32,0,32
/* Jump table of 3rd level handlers */
trap_jtable:
.long do_exception_error /* 0x000 */
.long do_exception_error /* 0x020 */
#ifdef [31mCONFIG_MMU[0m
.long tlb_miss_load /* 0x040 */
.long tlb_miss_store /* 0x060 */
#else
.long do_exception_error
.long do_exception_error
#endif
! ARTIFICIAL pseudo-EXPEVT setting
.long do_debug_interrupt /* 0x080 */
#ifdef [31mCONFIG_MMU[0m
.long tlb_miss_load /* 0x0A0 */
.long tlb_miss_store /* 0x0C0 */
#else
.long do_exception_error
.long do_exception_error
#endif
.long do_address_error_load /* 0x0E0 */
.long do_address_error_store /* 0x100 */
#ifdef [31mCONFIG_SH_FPU[0m
.long do_fpu_error /* 0x120 */
#else
.long do_exception_error /* 0x120 */
#endif
.long do_exception_error /* 0x140 */
.long system_call /* 0x160 */
.long do_reserved_inst /* 0x180 */
.long do_illegal_slot_inst /* 0x1A0 */
.long do_exception_error /* 0x1C0 - NMI */
.long do_exception_error /* 0x1E0 */
.rept 15
.long do_IRQ /* 0x200 - 0x3C0 */
.endr
.long do_exception_error /* 0x3E0 */
.rept 32
.long do_IRQ /* 0x400 - 0x7E0 */
.endr
.long fpu_error_or_IRQA /* 0x800 */
.long fpu_error_or_IRQB /* 0x820 */
.long do_IRQ /* 0x840 */
.long do_IRQ /* 0x860 */
.rept 6
.long do_exception_error /* 0x880 - 0x920 */
.endr
.long breakpoint_trap_handler /* 0x940 */
.long do_exception_error /* 0x960 */
.long do_single_step /* 0x980 */
.rept 3
.long do_exception_error /* 0x9A0 - 0x9E0 */
.endr
.long do_IRQ /* 0xA00 */
.long do_IRQ /* 0xA20 */
#ifdef [31mCONFIG_MMU[0m
.long itlb_miss_or_IRQ /* 0xA40 */
#else
.long do_IRQ
#endif
.long do_IRQ /* 0xA60 */
.long do_IRQ /* 0xA80 */
#ifdef [31mCONFIG_MMU[0m
.long itlb_miss_or_IRQ /* 0xAA0 */
#else
.long do_IRQ
#endif
.long do_exception_error /* 0xAC0 */
.long do_address_error_exec /* 0xAE0 */
.rept 8
.long do_exception_error /* 0xB00 - 0xBE0 */
.endr
.rept 18
.long do_IRQ /* 0xC00 - 0xE20 */
.endr
.section .text64, "ax"
/*
* --- Exception/Interrupt/Event Handling Section
*/
/*
* VBR and RESVEC blocks.
*
* First level handler for VBR-based exceptions.
*
* To avoid waste of space, align to the maximum text block size.
* This is assumed to be at most 128 bytes or 32 instructions.
* DO NOT EXCEED 32 instructions on the first level handlers !
*
* Also note that RESVEC is contained within the VBR block
* where the room left (1KB - TEXT_SIZE) allows placing
* the RESVEC block (at most 512B + TEXT_SIZE).
*
* So first (and only) level handler for RESVEC-based exceptions.
*
* Where the fault/interrupt is handled (not_a_tlb_miss, tlb_miss
* and interrupt) we are a lot tight with register space until
* saving onto the stack frame, which is done in handle_exception().
*
*/
#define TEXT_SIZE 128
#define BLOCK_SIZE 1664 /* Dynamic check, 13*128 */
.balign TEXT_SIZE
LVBR_block:
.space 256, 0 /* Power-on class handler, */
/* not required here */
not_a_tlb_miss:
synco /* TAKum03020 (but probably a good idea anyway.) */
/* Save original stack pointer into KCR1 */
putcon SP, KCR1
/* Save other original registers into reg_save_area */
movi reg_save_area, SP
st.q SP, SAVED_R2, r2
st.q SP, SAVED_R3, r3
st.q SP, SAVED_R4, r4
st.q SP, SAVED_R5, r5
st.q SP, SAVED_R6, r6
st.q SP, SAVED_R18, r18
gettr tr0, r3
st.q SP, SAVED_TR0, r3
/* Set args for Non-debug, Not a TLB miss class handler */
getcon EXPEVT, r2
movi ret_from_exception, r3
ori r3, 1, r3
movi EVENT_FAULT_NOT_TLB, r4
or SP, ZERO, r5
getcon KCR1, SP
pta handle_exception, tr0
blink tr0, ZERO
.balign 256
! VBR+0x200
nop
.balign 256
! VBR+0x300
nop
.balign 256
/*
* Instead of the natural .balign 1024 place RESVEC here
* respecting the final 1KB alignment.
*/
.balign TEXT_SIZE
/*
* Instead of '.space 1024-TEXT_SIZE' place the RESVEC
* block making sure the final alignment is correct.
*/
#ifdef [31mCONFIG_MMU[0m
tlb_miss:
synco /* TAKum03020 (but probably a good idea anyway.) */
putcon SP, KCR1
movi reg_save_area, SP
/* SP is guaranteed 32-byte aligned. */
st.q SP, TLB_SAVED_R0 , r0
st.q SP, TLB_SAVED_R1 , r1
st.q SP, SAVED_R2 , r2
st.q SP, SAVED_R3 , r3
st.q SP, SAVED_R4 , r4
st.q SP, SAVED_R5 , r5
st.q SP, SAVED_R6 , r6
st.q SP, SAVED_R18, r18
/* Save R25 for safety; as/ld may want to use it to achieve the call to
* the code in mm/tlbmiss.c */
st.q SP, TLB_SAVED_R25, r25
gettr tr0, r2
gettr tr1, r3
gettr tr2, r4
gettr tr3, r5
gettr tr4, r18
st.q SP, SAVED_TR0 , r2
st.q SP, TLB_SAVED_TR1 , r3
st.q SP, TLB_SAVED_TR2 , r4
st.q SP, TLB_SAVED_TR3 , r5
st.q SP, TLB_SAVED_TR4 , r18
pt do_fast_page_fault, tr0
getcon SSR, r2
getcon EXPEVT, r3
getcon TEA, r4
shlri r2, 30, r2
andi r2, 1, r2 /* r2 = SSR.MD */
blink tr0, LINK
pt fixup_to_invoke_general_handler, tr1
/* If the fast path handler fixed the fault, just drop through quickly
to the restore code right away to return to the excepting context.
*/
bnei/u r2, 0, tr1
fast_tlb_miss_restore:
ld.q SP, SAVED_TR0, r2
ld.q SP, TLB_SAVED_TR1, r3
ld.q SP, TLB_SAVED_TR2, r4
ld.q SP, TLB_SAVED_TR3, r5
ld.q SP, TLB_SAVED_TR4, r18
ptabs r2, tr0
ptabs r3, tr1
ptabs r4, tr2
ptabs r5, tr3
ptabs r18, tr4
ld.q SP, TLB_SAVED_R0, r0
ld.q SP, TLB_SAVED_R1, r1
ld.q SP, SAVED_R2, r2
ld.q SP, SAVED_R3, r3
ld.q SP, SAVED_R4, r4
ld.q SP, SAVED_R5, r5
ld.q SP, SAVED_R6, r6
ld.q SP, SAVED_R18, r18
ld.q SP, TLB_SAVED_R25, r25
getcon KCR1, SP
rte
nop /* for safety, in case the code is run on sh5-101 cut1.x */
fixup_to_invoke_general_handler:
/* OK, new method. Restore stuff that's not expected to get saved into
the 'first-level' reg save area, then just fall through to setting
up the registers and calling the second-level handler. */
/* 2nd level expects r2,3,4,5,6,18,tr0 to be saved. So we must restore
r25,tr1-4 and save r6 to get into the right state. */
ld.q SP, TLB_SAVED_TR1, r3
ld.q SP, TLB_SAVED_TR2, r4
ld.q SP, TLB_SAVED_TR3, r5
ld.q SP, TLB_SAVED_TR4, r18
ld.q SP, TLB_SAVED_R25, r25
ld.q SP, TLB_SAVED_R0, r0
ld.q SP, TLB_SAVED_R1, r1
ptabs/u r3, tr1
ptabs/u r4, tr2
ptabs/u r5, tr3
ptabs/u r18, tr4
/* Set args for Non-debug, TLB miss class handler */
getcon EXPEVT, r2
movi ret_from_exception, r3
ori r3, 1, r3
movi EVENT_FAULT_TLB, r4
or SP, ZERO, r5
getcon KCR1, SP
pta handle_exception, tr0
blink tr0, ZERO
#else /* CONFIG_MMU */
.balign 256
#endif
/* NB TAKE GREAT CARE HERE TO ENSURE THAT THE INTERRUPT CODE
DOES END UP AT VBR+0x600 */
nop
nop
nop
nop
nop
nop
.balign 256
/* VBR + 0x600 */
interrupt:
synco /* TAKum03020 (but probably a good idea anyway.) */
/* Save original stack pointer into KCR1 */
putcon SP, KCR1
/* Save other original registers into reg_save_area */
movi reg_save_area, SP
st.q SP, SAVED_R2, r2
st.q SP, SAVED_R3, r3
st.q SP, SAVED_R4, r4
st.q SP, SAVED_R5, r5
st.q SP, SAVED_R6, r6
st.q SP, SAVED_R18, r18
gettr tr0, r3
st.q SP, SAVED_TR0, r3
/* Set args for interrupt class handler */
getcon INTEVT, r2
movi ret_from_irq, r3
ori r3, 1, r3
movi EVENT_INTERRUPT, r4
or SP, ZERO, r5
getcon KCR1, SP
pta handle_exception, tr0
blink tr0, ZERO
.balign TEXT_SIZE /* let's waste the bare minimum */
LVBR_block_end: /* Marker. Used for total checking */
.balign 256
LRESVEC_block:
/* Panic handler. Called with MMU off. Possible causes/actions:
* - Reset: Jump to program start.
* - Single Step: Turn off Single Step & return.
* - Others: Call panic handler, passing PC as arg.
* (this may need to be extended...)
*/
reset_or_panic:
synco /* TAKum03020 (but probably a good idea anyway.) */
putcon SP, DCR
/* First save r0-1 and tr0, as we need to use these */
movi resvec_save_area-[31mCONFIG_PAGE_OFFSET[0m, SP
st.q SP, 0, r0
st.q SP, 8, r1
gettr tr0, r0
st.q SP, 32, r0
/* Check cause */
getcon EXPEVT, r0
movi RESET_CAUSE, r1
sub r1, r0, r1 /* r1=0 if reset */
movi _stext-[31mCONFIG_PAGE_OFFSET[0m, r0
ori r0, 1, r0
ptabs r0, tr0
beqi r1, 0, tr0 /* Jump to start address if reset */
getcon EXPEVT, r0
movi DEBUGSS_CAUSE, r1
sub r1, r0, r1 /* r1=0 if single step */
pta single_step_panic, tr0
beqi r1, 0, tr0 /* jump if single step */
/* Now jump to where we save the registers. */
movi panic_stash_regs-[31mCONFIG_PAGE_OFFSET[0m, r1
ptabs r1, tr0
blink tr0, r63
single_step_panic:
/* We are in a handler with Single Step set. We need to resume the
* handler, by turning on MMU & turning off Single Step. */
getcon SSR, r0
movi SR_MMU, r1
or r0, r1, r0
movi ~SR_SS, r1
and r0, r1, r0
putcon r0, SSR
/* Restore EXPEVT, as the rte won't do this */
getcon PEXPEVT, r0
putcon r0, EXPEVT
/* Restore regs */
ld.q SP, 32, r0
ptabs r0, tr0
ld.q SP, 0, r0
ld.q SP, 8, r1
getcon DCR, SP
synco
rte
.balign 256
debug_exception:
synco /* TAKum03020 (but probably a good idea anyway.) */
/*
* Single step/software_break_point first level handler.
* Called with MMU off, so the first thing we do is enable it
* by doing an rte with appropriate SSR.
*/
putcon SP, DCR
/* Save SSR & SPC, together with R0 & R1, as we need to use 2 regs. */
movi resvec_save_area-[31mCONFIG_PAGE_OFFSET[0m, SP
/* With the MMU off, we are bypassing the cache, so purge any
* data that will be made stale by the following stores.
*/
ocbp SP, 0
synco
st.q SP, 0, r0
st.q SP, 8, r1
getcon SPC, r0
st.q SP, 16, r0
getcon SSR, r0
st.q SP, 24, r0
/* Enable MMU, block exceptions, set priv mode, disable single step */
movi SR_MMU | SR_BL | SR_MD, r1
or r0, r1, r0
movi ~SR_SS, r1
and r0, r1, r0
putcon r0, SSR
/* Force control to debug_exception_2 when rte is executed */
movi debug_exeception_2, r0
ori r0, 1, r0 /* force SHmedia, just in case */
putcon r0, SPC
getcon DCR, SP
synco
rte
debug_exeception_2:
/* Restore saved regs */
putcon SP, KCR1
movi resvec_save_area, SP
ld.q SP, 24, r0
putcon r0, SSR
ld.q SP, 16, r0
putcon r0, SPC
ld.q SP, 0, r0
ld.q SP, 8, r1
/* Save other original registers into reg_save_area */
movi reg_save_area, SP
st.q SP, SAVED_R2, r2
st.q SP, SAVED_R3, r3
st.q SP, SAVED_R4, r4
st.q SP, SAVED_R5, r5
st.q SP, SAVED_R6, r6
st.q SP, SAVED_R18, r18
gettr tr0, r3
st.q SP, SAVED_TR0, r3
/* Set args for debug class handler */
getcon EXPEVT, r2
movi ret_from_exception, r3
ori r3, 1, r3
movi EVENT_DEBUG, r4
or SP, ZERO, r5
getcon KCR1, SP
pta handle_exception, tr0
blink tr0, ZERO
.balign 256
debug_interrupt:
/* !!! WE COME HERE IN REAL MODE !!! */
/* Hook-up debug interrupt to allow various debugging options to be
* hooked into its handler. */
/* Save original stack pointer into KCR1 */
synco
putcon SP, KCR1
movi resvec_save_area-[31mCONFIG_PAGE_OFFSET[0m, SP
ocbp SP, 0
ocbp SP, 32
synco
/* Save other original registers into reg_save_area thru real addresses */
st.q SP, SAVED_R2, r2
st.q SP, SAVED_R3, r3
st.q SP, SAVED_R4, r4
st.q SP, SAVED_R5, r5
st.q SP, SAVED_R6, r6
st.q SP, SAVED_R18, r18
gettr tr0, r3
st.q SP, SAVED_TR0, r3
/* move (spc,ssr)->(pspc,pssr). The rte will shift
them back again, so that they look like the originals
as far as the real handler code is concerned. */
getcon spc, r6
putcon r6, pspc
getcon ssr, r6
putcon r6, pssr
! construct useful SR for handle_exception
movi 3, r6
shlli r6, 30, r6
getcon sr, r18
or r18, r6, r6
putcon r6, ssr
! SSR is now the current SR with the MD and MMU bits set
! i.e. the rte will switch back to priv mode and put
! the mmu back on
! construct spc
movi handle_exception, r18
ori r18, 1, r18 ! for safety (do we need this?)
putcon r18, spc
/* Set args for Non-debug, Not a TLB miss class handler */
! EXPEVT==0x80 is unused, so 'steal' this value to put the
! debug interrupt handler in the vectoring table
movi 0x80, r2
movi ret_from_exception, r3
ori r3, 1, r3
movi EVENT_FAULT_NOT_TLB, r4
or SP, ZERO, r5
movi [31mCONFIG_PAGE_OFFSET[0m, r6
add r6, r5, r5
getcon KCR1, SP
synco ! for safety
rte ! -> handle_exception, switch back to priv mode again
LRESVEC_block_end: /* Marker. Unused. */
.balign TEXT_SIZE
/*
* Second level handler for VBR-based exceptions. Pre-handler.
* In common to all stack-frame sensitive handlers.
*
* Inputs:
* (KCR0) Current [current task union]
* (KCR1) Original SP
* (r2) INTEVT/EXPEVT
* (r3) appropriate return address
* (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault, 3=debug)
* (r5) Pointer to reg_save_area
* (SP) Original SP
*
* Available registers:
* (r6)
* (r18)
* (tr0)
*
*/
handle_exception:
/* Common 2nd level handler. */
/* First thing we need an appropriate stack pointer */
getcon SSR, r6
shlri r6, 30, r6
andi r6, 1, r6
pta stack_ok, tr0
bne r6, ZERO, tr0 /* Original stack pointer is fine */
/* Set stack pointer for user fault */
getcon KCR0, SP
movi THREAD_SIZE, r6 /* Point to the end */
add SP, r6, SP
stack_ok:
/* DEBUG : check for underflow/overflow of the kernel stack */
pta no_underflow, tr0
getcon KCR0, r6
movi 1024, r18
add r6, r18, r6
bge SP, r6, tr0 ! ? below 1k from bottom of stack : danger zone
/* Just panic to cause a crash. */
bad_sp:
ld.b r63, 0, r6
nop
no_underflow:
pta bad_sp, tr0
getcon kcr0, r6
movi THREAD_SIZE, r18
add r18, r6, r6
bgt SP, r6, tr0 ! sp above the stack
/* Make some room for the BASIC frame. */
movi -(FRAME_SIZE), r6
add SP, r6, SP
/* Could do this with no stalling if we had another spare register, but the
code below will be OK. */
ld.q r5, SAVED_R2, r6
ld.q r5, SAVED_R3, r18
st.q SP, FRAME_R(2), r6
ld.q r5, SAVED_R4, r6
st.q SP, FRAME_R(3), r18
ld.q r5, SAVED_R5, r18
st.q SP, FRAME_R(4), r6
ld.q r5, SAVED_R6, r6
st.q SP, FRAME_R(5), r18
ld.q r5, SAVED_R18, r18
st.q SP, FRAME_R(6), r6
ld.q r5, SAVED_TR0, r6
st.q SP, FRAME_R(18), r18
st.q SP, FRAME_T(0), r6
/* Keep old SP around */
getcon KCR1, r6
/* Save the rest of the general purpose registers */
st.q SP, FRAME_R(0), r0
st.q SP, FRAME_R(1), r1
st.q SP, FRAME_R(7), r7
st.q SP, FRAME_R(8), r8
st.q SP, FRAME_R(9), r9
st.q SP, FRAME_R(10), r10
st.q SP, FRAME_R(11), r11
st.q SP, FRAME_R(12), r12
st.q SP, FRAME_R(13), r13
st.q SP, FRAME_R(14), r14
/* SP is somewhere else */
st.q SP, FRAME_R(15), r6
st.q SP, FRAME_R(16), r16
st.q SP, FRAME_R(17), r17
/* r18 is saved earlier. */
st.q SP, FRAME_R(19), r19
st.q SP, FRAME_R(20), r20
st.q SP, FRAME_R(21), r21
st.q SP, FRAME_R(22), r22
st.q SP, FRAME_R(23), r23
st.q SP, FRAME_R(24), r24
st.q SP, FRAME_R(25), r25
st.q SP, FRAME_R(26), r26
st.q SP, FRAME_R(27), r27
st.q SP, FRAME_R(28), r28
st.q SP, FRAME_R(29), r29
st.q SP, FRAME_R(30), r30
st.q SP, FRAME_R(31), r31
st.q SP, FRAME_R(32), r32
st.q SP, FRAME_R(33), r33
st.q SP, FRAME_R(34), r34
st.q SP, FRAME_R(35), r35
st.q SP, FRAME_R(36), r36
st.q SP, FRAME_R(37), r37
st.q SP, FRAME_R(38), r38
st.q SP, FRAME_R(39), r39
st.q SP, FRAME_R(40), r40
st.q SP, FRAME_R(41), r41
st.q SP, FRAME_R(42), r42
st.q SP, FRAME_R(43), r43
st.q SP, FRAME_R(44), r44
st.q SP, FRAME_R(45), r45
st.q SP, FRAME_R(46), r46
st.q SP, FRAME_R(47), r47
st.q SP, FRAME_R(48), r48
st.q SP, FRAME_R(49), r49
st.q SP, FRAME_R(50), r50
st.q SP, FRAME_R(51), r51
st.q SP, FRAME_R(52), r52
st.q SP, FRAME_R(53), r53
st.q SP, FRAME_R(54), r54
st.q SP, FRAME_R(55), r55
st.q SP, FRAME_R(56), r56
st.q SP, FRAME_R(57), r57
st.q SP, FRAME_R(58), r58
st.q SP, FRAME_R(59), r59
st.q SP, FRAME_R(60), r60
st.q SP, FRAME_R(61), r61
st.q SP, FRAME_R(62), r62
/*
* Save the S* registers.
*/
getcon SSR, r61
st.q SP, FRAME_S(FSSR), r61
getcon SPC, r62
st.q SP, FRAME_S(FSPC), r62
movi -1, r62 /* Reset syscall_nr */
st.q SP, FRAME_S(FSYSCALL_ID), r62
/* Save the rest of the target registers */
gettr tr1, r6
st.q SP, FRAME_T(1), r6
gettr tr2, r6
st.q SP, FRAME_T(2), r6
gettr tr3, r6
st.q SP, FRAME_T(3), r6
gettr tr4, r6
st.q SP, FRAME_T(4), r6
gettr tr5, r6
st.q SP, FRAME_T(5), r6
gettr tr6, r6
st.q SP, FRAME_T(6), r6
gettr tr7, r6
st.q SP, FRAME_T(7), r6
! setup FP so that unwinder can wind back through nested kernel mode
! exceptions
add SP, ZERO, r14
/* For syscall and debug race condition, get TRA now */
getcon TRA, r5
/* We are in a safe position to turn SR.BL off, but set IMASK=0xf
* Also set FD, to catch FPU usage in the kernel.
*
* benedict.gaster@superh.com 29/07/2002
*
* On all SH5-101 revisions it is unsafe to raise the IMASK and at the
* same time change BL from 1->0, as any pending interrupt of a level
* higher than he previous value of IMASK will leak through and be
* taken unexpectedly.
*
* To avoid this we raise the IMASK and then issue another PUTCON to
* enable interrupts.
*/
getcon SR, r6
movi SR_IMASK | SR_FD, r7
or r6, r7, r6
putcon r6, SR
movi SR_UNBLOCK_EXC, r7
and r6, r7, r6
putcon r6, SR
/* Now call the appropriate 3rd level handler */
or r3, ZERO, LINK
movi trap_jtable, r3
shlri r2, 3, r2
ldx.l r2, r3, r3
shlri r2, 2, r2
ptabs r3, tr0
or SP, ZERO, r3
blink tr0, ZERO
/*
* Second level handler for VBR-based exceptions. Post-handlers.
*
* Post-handlers for interrupts (ret_from_irq), exceptions
* (ret_from_exception) and common reentrance doors (restore_all
* to get back to the original context, ret_from_syscall loop to
* check kernel exiting).
*
* ret_with_reschedule and work_notifysig are an inner lables of
* the ret_from_syscall loop.
*
* In common to all stack-frame sensitive handlers.
*
* Inputs:
* (SP) struct pt_regs *, original register's frame pointer (basic)
*
*/
.global ret_from_irq
ret_from_irq:
ld.q SP, FRAME_S(FSSR), r6
shlri r6, 30, r6
andi r6, 1, r6
pta resume_kernel, tr0
bne r6, ZERO, tr0 /* no further checks */
STI()
pta ret_with_reschedule, tr0
blink tr0, ZERO /* Do not check softirqs */
.global ret_from_exception
ret_from_exception:
preempt_stop()
ld.q SP, FRAME_S(FSSR), r6
shlri r6, 30, r6
andi r6, 1, r6
pta resume_kernel, tr0
bne r6, ZERO, tr0 /* no further checks */
/* Check softirqs */
#ifdef [31mCONFIG_PREEMPT[0m
pta ret_from_syscall, tr0
blink tr0, ZERO
resume_kernel:
CLI()
pta restore_all, tr0
getcon KCR0, r6
ld.l r6, TI_PRE_COUNT, r7
beq/u r7, ZERO, tr0
need_resched:
ld.l r6, TI_FLAGS, r7
movi (1 << TIF_NEED_RESCHED), r8
and r8, r7, r8
bne r8, ZERO, tr0
getcon SR, r7
andi r7, 0xf0, r7
bne r7, ZERO, tr0
movi preempt_schedule_irq, r7
ori r7, 1, r7
ptabs r7, tr1
blink tr1, LINK
pta need_resched, tr1
blink tr1, ZERO
#endif
.global ret_from_syscall
ret_from_syscall:
ret_with_reschedule:
getcon KCR0, r6 ! r6 contains current_thread_info
ld.l r6, TI_FLAGS, r7 ! r7 contains current_thread_info->flags
movi _TIF_NEED_RESCHED, r8
and r8, r7, r8
pta work_resched, tr0
bne r8, ZERO, tr0
pta restore_all, tr1
movi (_TIF_SIGPENDING|_TIF_NOTIFY_RESUME), r8
and r8, r7, r8
pta work_notifysig, tr0
bne r8, ZERO, tr0
blink tr1, ZERO
work_resched:
pta ret_from_syscall, tr0
gettr tr0, LINK
movi schedule, r6
ptabs r6, tr0
blink tr0, ZERO /* Call schedule(), return on top */
work_notifysig:
gettr tr1, LINK
movi do_notify_resume, r6
ptabs r6, tr0
or SP, ZERO, r2
or r7, ZERO, r3
blink tr0, LINK /* Call do_notify_resume(regs, current_thread_info->flags), return here */
restore_all:
/* Do prefetches */
ld.q SP, FRAME_T(0), r6
ld.q SP, FRAME_T(1), r7
ld.q SP, FRAME_T(2), r8
ld.q SP, FRAME_T(3), r9
ptabs r6, tr0
ptabs r7, tr1
ptabs r8, tr2
ptabs r9, tr3
ld.q SP, FRAME_T(4), r6
ld.q SP, FRAME_T(5), r7
ld.q SP, FRAME_T(6), r8
ld.q SP, FRAME_T(7), r9
ptabs r6, tr4
ptabs r7, tr5
ptabs r8, tr6
ptabs r9, tr7
ld.q SP, FRAME_R(0), r0
ld.q SP, FRAME_R(1), r1
ld.q SP, FRAME_R(2), r2
ld.q SP, FRAME_R(3), r3
ld.q SP, FRAME_R(4), r4
ld.q SP, FRAME_R(5), r5
ld.q SP, FRAME_R(6), r6
ld.q SP, FRAME_R(7), r7
ld.q SP, FRAME_R(8), r8
ld.q SP, FRAME_R(9), r9
ld.q SP, FRAME_R(10), r10
ld.q SP, FRAME_R(11), r11
ld.q SP, FRAME_R(12), r12
ld.q SP, FRAME_R(13), r13
ld.q SP, FRAME_R(14), r14
ld.q SP, FRAME_R(16), r16
ld.q SP, FRAME_R(17), r17
ld.q SP, FRAME_R(18), r18
ld.q SP, FRAME_R(19), r19
ld.q SP, FRAME_R(20), r20
ld.q SP, FRAME_R(21), r21
ld.q SP, FRAME_R(22), r22
ld.q SP, FRAME_R(23), r23
ld.q SP, FRAME_R(24), r24
ld.q SP, FRAME_R(25), r25
ld.q SP, FRAME_R(26), r26
ld.q SP, FRAME_R(27), r27
ld.q SP, FRAME_R(28), r28
ld.q SP, FRAME_R(29), r29
ld.q SP, FRAME_R(30), r30
ld.q SP, FRAME_R(31), r31
ld.q SP, FRAME_R(32), r32
ld.q SP, FRAME_R(33), r33
ld.q SP, FRAME_R(34), r34
ld.q SP, FRAME_R(35), r35
ld.q SP, FRAME_R(36), r36
ld.q SP, FRAME_R(37), r37
ld.q SP, FRAME_R(38), r38
ld.q SP, FRAME_R(39), r39
ld.q SP, FRAME_R(40), r40
ld.q SP, FRAME_R(41), r41
ld.q SP, FRAME_R(42), r42
ld.q SP, FRAME_R(43), r43
ld.q SP, FRAME_R(44), r44
ld.q SP, FRAME_R(45), r45
ld.q SP, FRAME_R(46), r46
ld.q SP, FRAME_R(47), r47
ld.q SP, FRAME_R(48), r48
ld.q SP, FRAME_R(49), r49
ld.q SP, FRAME_R(50), r50
ld.q SP, FRAME_R(51), r51
ld.q SP, FRAME_R(52), r52
ld.q SP, FRAME_R(53), r53
ld.q SP, FRAME_R(54), r54
ld.q SP, FRAME_R(55), r55
ld.q SP, FRAME_R(56), r56
ld.q SP, FRAME_R(57), r57
ld.q SP, FRAME_R(58), r58
getcon SR, r59
movi SR_BLOCK_EXC, r60
or r59, r60, r59
putcon r59, SR /* SR.BL = 1, keep nesting out */
ld.q SP, FRAME_S(FSSR), r61
ld.q SP, FRAME_S(FSPC), r62
movi SR_ASID_MASK, r60
and r59, r60, r59
andc r61, r60, r61 /* Clear out older ASID */
or r59, r61, r61 /* Retain current ASID */
putcon r61, SSR
putcon r62, SPC
/* Ignore FSYSCALL_ID */
ld.q SP, FRAME_R(59), r59
ld.q SP, FRAME_R(60), r60
ld.q SP, FRAME_R(61), r61
ld.q SP, FRAME_R(62), r62
/* Last touch */
ld.q SP, FRAME_R(15), SP
rte
nop
/*
* Third level handlers for VBR-based exceptions. Adapting args to
* and/or deflecting to fourth level handlers.
*
* Fourth level handlers interface.
* Most are C-coded handlers directly pointed by the trap_jtable.
* (Third = Fourth level)
* Inputs:
* (r2) fault/interrupt code, entry number (e.g. NMI = 14,
* IRL0-3 (0000) = 16, RTLBMISS = 2, SYSCALL = 11, etc ...)
* (r3) struct pt_regs *, original register's frame pointer
* (r4) Event (0 = interrupt, 1 = TLB miss fault, 2 = Not TLB miss fault)
* (r5) TRA control register (for syscall/debug benefit only)
* (LINK) return address
* (SP) = r3
*
* Kernel TLB fault handlers will get a slightly different interface.
* (r2) struct pt_regs *, original register's frame pointer
* (r3) page fault error code (see asm/thread_info.h)
* (r4) Effective Address of fault
* (LINK) return address
* (SP) = r2
*
* fpu_error_or_IRQ? is a helper to deflect to the right cause.
*
*/
#ifdef [31mCONFIG_MMU[0m
tlb_miss_load:
or SP, ZERO, r2
or ZERO, ZERO, r3 /* Read */
getcon TEA, r4
pta call_do_page_fault, tr0
beq ZERO, ZERO, tr0
tlb_miss_store:
or SP, ZERO, r2
movi FAULT_CODE_WRITE, r3 /* Write */
getcon TEA, r4
pta call_do_page_fault, tr0
beq ZERO, ZERO, tr0
itlb_miss_or_IRQ:
pta its_IRQ, tr0
beqi/u r4, EVENT_INTERRUPT, tr0
/* ITLB miss */
or SP, ZERO, r2
movi FAULT_CODE_ITLB, r3
getcon TEA, r4
/* Fall through */
call_do_page_fault:
movi do_page_fault, r6
ptabs r6, tr0
blink tr0, ZERO
#endif /* CONFIG_MMU */
fpu_error_or_IRQA:
pta its_IRQ, tr0
beqi/l r4, EVENT_INTERRUPT, tr0
#ifdef [31mCONFIG_SH_FPU[0m
movi fpu_state_restore_trap_handler, r6
#else
movi do_exception_error, r6
#endif
ptabs r6, tr0
blink tr0, ZERO
fpu_error_or_IRQB:
pta its_IRQ, tr0
beqi/l r4, EVENT_INTERRUPT, tr0
#ifdef [31mCONFIG_SH_FPU[0m
movi fpu_state_restore_trap_handler, r6
#else
movi do_exception_error, r6
#endif
ptabs r6, tr0
blink tr0, ZERO
its_IRQ:
movi do_IRQ, r6
ptabs r6, tr0
blink tr0, ZERO
/*
* system_call/unknown_trap third level handler:
*
* Inputs:
* (r2) fault/interrupt code, entry number (TRAP = 11)
* (r3) struct pt_regs *, original register's frame pointer
* (r4) Not used. Event (0=interrupt, 1=TLB miss fault, 2=Not TLB miss fault)
* (r5) TRA Control Reg (0x00xyzzzz: x=1 SYSCALL, y = #args, z=nr)
* (SP) = r3
* (LINK) return address: ret_from_exception
* (*r3) Syscall parms: SC#, arg0, arg1, ..., arg5 in order (Saved r2/r7)
*
* Outputs:
* (*r3) Syscall reply (Saved r2)
* (LINK) In case of syscall only it can be scrapped.
* Common second level post handler will be ret_from_syscall.
* Common (non-trace) exit point to that is syscall_ret (saving
* result to r2). Common bad exit point is syscall_bad (returning
* ENOSYS then saved to r2).
*
*/
unknown_trap:
/* Unknown Trap or User Trace */
movi do_unknown_trapa, r6
ptabs r6, tr0
ld.q r3, FRAME_R(9), r2 /* r2 = #arg << 16 | syscall # */
andi r2, 0x1ff, r2 /* r2 = syscall # */
blink tr0, LINK
pta syscall_ret, tr0
blink tr0, ZERO
/* New syscall implementation*/
system_call:
pta unknown_trap, tr0
or r5, ZERO, r4 /* TRA (=r5) -> r4 */
shlri r4, 20, r4
bnei r4, 1, tr0 /* unknown_trap if not 0x1yzzzz */
/* It's a system call */
st.q r3, FRAME_S(FSYSCALL_ID), r5 /* ID (0x1yzzzz) -> stack */
andi r5, 0x1ff, r5 /* syscall # -> r5 */
STI()
pta syscall_allowed, tr0
movi NR_syscalls - 1, r4 /* Last valid */
bgeu/l r4, r5, tr0
syscall_bad:
/* Return ENOSYS ! */
movi -(ENOSYS), r2 /* Fall-through */
.global syscall_ret
syscall_ret:
st.q SP, FRAME_R(9), r2 /* Expecting SP back to BASIC frame */
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
pta ret_from_syscall, tr0
blink tr0, ZERO
/* A different return path for ret_from_fork, because we now need
* to call schedule_tail with the later kernels. Because prev is
* loaded into r2 by switch_to() means we can just call it straight away
*/
.global ret_from_fork
ret_from_fork:
movi schedule_tail,r5
ori r5, 1, r5
ptabs r5, tr0
blink tr0, LINK
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
pta ret_from_syscall, tr0
blink tr0, ZERO
.global ret_from_kernel_thread
ret_from_kernel_thread:
movi schedule_tail,r5
ori r5, 1, r5
ptabs r5, tr0
blink tr0, LINK
ld.q SP, FRAME_R(2), r2
ld.q SP, FRAME_R(3), r3
ptabs r3, tr0
blink tr0, LINK
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
pta ret_from_syscall, tr0
blink tr0, ZERO
syscall_allowed:
/* Use LINK to deflect the exit point, default is syscall_ret */
pta syscall_ret, tr0
gettr tr0, LINK
pta syscall_notrace, tr0
getcon KCR0, r2
ld.l r2, TI_FLAGS, r4
movi _TIF_WORK_SYSCALL_MASK, r6
and r6, r4, r6
beq/l r6, ZERO, tr0
/* Trace it by calling syscall_trace before and after */
movi do_syscall_trace_enter, r4
or SP, ZERO, r2
ptabs r4, tr0
blink tr0, LINK
/* Save the retval */
st.q SP, FRAME_R(2), r2
/* Reload syscall number as r5 is trashed by do_syscall_trace_enter */
ld.q SP, FRAME_S(FSYSCALL_ID), r5
andi r5, 0x1ff, r5
pta syscall_ret_trace, tr0
gettr tr0, LINK
syscall_notrace:
/* Now point to the appropriate 4th level syscall handler */
movi sys_call_table, r4
shlli r5, 2, r5
ldx.l r4, r5, r5
ptabs r5, tr0
/* Prepare original args */
ld.q SP, FRAME_R(2), r2
ld.q SP, FRAME_R(3), r3
ld.q SP, FRAME_R(4), r4
ld.q SP, FRAME_R(5), r5
ld.q SP, FRAME_R(6), r6
ld.q SP, FRAME_R(7), r7
/* And now the trick for those syscalls requiring regs * ! */
or SP, ZERO, r8
/* Call it */
blink tr0, ZERO /* LINK is already properly set */
syscall_ret_trace:
/* We get back here only if under trace */
st.q SP, FRAME_R(9), r2 /* Save return value */
movi do_syscall_trace_leave, LINK
or SP, ZERO, r2
ptabs LINK, tr0
blink tr0, LINK
/* This needs to be done after any syscall tracing */
ld.q SP, FRAME_S(FSPC), r2
addi r2, 4, r2 /* Move PC, being pre-execution event */
st.q SP, FRAME_S(FSPC), r2
pta ret_from_syscall, tr0
blink tr0, ZERO /* Resume normal return sequence */
/*
* --- Switch to running under a particular ASID and return the previous ASID value
* --- The caller is assumed to have done a cli before calling this.
*
* Input r2 : new ASID
* Output r2 : old ASID
*/
.global switch_and_save_asid
switch_and_save_asid:
getcon sr, r0
movi 255, r4
shlli r4, 16, r4 /* r4 = mask to select ASID */
and r0, r4, r3 /* r3 = shifted old ASID */
andi r2, 255, r2 /* mask down new ASID */
shlli r2, 16, r2 /* align new ASID against SR.ASID */
andc r0, r4, r0 /* efface old ASID from SR */
or r0, r2, r0 /* insert the new ASID */
putcon r0, ssr
movi 1f, r0
putcon r0, spc
rte
nop
1:
ptabs LINK, tr0
shlri r3, 16, r2 /* r2 = old ASID */
blink tr0, r63
.global route_to_panic_handler
route_to_panic_handler:
/* Switch to real mode, goto panic_handler, don't return. Useful for
last-chance debugging, e.g. if no output wants to go to the console.
*/
movi panic_handler - [31mCONFIG_PAGE_OFFSET[0m, r1
ptabs r1, tr0
pta 1f, tr1
gettr tr1, r0
putcon r0, spc
getcon sr, r0
movi 1, r1
shlli r1, 31, r1
andc r0, r1, r0
putcon r0, ssr
rte
nop
1: /* Now in real mode */
blink tr0, r63
nop
.global peek_real_address_q
peek_real_address_q:
/* Two args:
r2 : real mode address to peek
r2(out) : result quadword
This is provided as a cheapskate way of manipulating device
registers for debugging (to avoid the need to ioremap the debug
module, and to avoid the need to ioremap the watchpoint
controller in a way that identity maps sufficient bits to avoid the
SH5-101 cut2 silicon defect).
This code is not performance critical
*/
add.l r2, r63, r2 /* sign extend address */
getcon sr, r0 /* r0 = saved original SR */
movi 1, r1
shlli r1, 28, r1
or r0, r1, r1 /* r0 with block bit set */
putcon r1, sr /* now in critical section */
movi 1, r36
shlli r36, 31, r36
andc r1, r36, r1 /* turn sr.mmu off in real mode section */
putcon r1, ssr
movi .peek0 - [31mCONFIG_PAGE_OFFSET[0m, r36 /* real mode target address */
movi 1f, r37 /* virtual mode return addr */
putcon r36, spc
synco
rte
nop
.peek0: /* come here in real mode, don't touch caches!!
still in critical section (sr.bl==1) */
putcon r0, ssr
putcon r37, spc
/* Here's the actual peek. If the address is bad, all bets are now off
* what will happen (handlers invoked in real-mode = bad news) */
ld.q r2, 0, r2
synco
rte /* Back to virtual mode */
nop
1:
ptabs LINK, tr0
blink tr0, r63
.global poke_real_address_q
poke_real_address_q:
/* Two args:
r2 : real mode address to poke
r3 : quadword value to write.
This is provided as a cheapskate way of manipulating device
registers for debugging (to avoid the need to ioremap the debug
module, and to avoid the need to ioremap the watchpoint
controller in a way that identity maps sufficient bits to avoid the
SH5-101 cut2 silicon defect).
This code is not performance critical
*/
add.l r2, r63, r2 /* sign extend address */
getcon sr, r0 /* r0 = saved original SR */
movi 1, r1
shlli r1, 28, r1
or r0, r1, r1 /* r0 with block bit set */
putcon r1, sr /* now in critical section */
movi 1, r36
shlli r36, 31, r36
andc r1, r36, r1 /* turn sr.mmu off in real mode section */
putcon r1, ssr
movi .poke0-[31mCONFIG_PAGE_OFFSET[0m, r36 /* real mode target address */
movi 1f, r37 /* virtual mode return addr */
putcon r36, spc
synco
rte
nop
.poke0: /* come here in real mode, don't touch caches!!
still in critical section (sr.bl==1) */
putcon r0, ssr
putcon r37, spc
/* Here's the actual poke. If the address is bad, all bets are now off
* what will happen (handlers invoked in real-mode = bad news) */
st.q r2, 0, r3
synco
rte /* Back to virtual mode */
nop
1:
ptabs LINK, tr0
blink tr0, r63
#ifdef [31mCONFIG_MMU[0m
/*
* --- User Access Handling Section
*/
/*
* User Access support. It all moved to non inlined Assembler
* functions in here.
*
* __kernel_size_t __copy_user(void *__to, const void *__from,
* __kernel_size_t __n)
*
* Inputs:
* (r2) target address
* (r3) source address
* (r4) size in bytes
*
* Ouputs:
* (*r2) target data
* (r2) non-copied bytes
*
* If a fault occurs on the user pointer, bail out early and return the
* number of bytes not copied in r2.
* Strategy : for large blocks, call a real memcpy function which can
* move >1 byte at a time using unaligned ld/st instructions, and can
* manipulate the cache using prefetch + alloco to improve the speed
* further. If a fault occurs in that function, just revert to the
* byte-by-byte approach used for small blocks; this is rare so the
* performance hit for that case does not matter.
*
* For small blocks it's not worth the overhead of setting up and calling
* the memcpy routine; do the copy a byte at a time.
*
*/
.global __copy_user
__copy_user:
pta __copy_user_byte_by_byte, tr1
movi 16, r0 ! this value is a best guess, should tune it by benchmarking
bge/u r0, r4, tr1
pta copy_user_memcpy, tr0
addi SP, -32, SP
/* Save arguments in case we have to fix-up unhandled page fault */
st.q SP, 0, r2
st.q SP, 8, r3
st.q SP, 16, r4
st.q SP, 24, r35 ! r35 is callee-save
/* Save LINK in a register to reduce RTS time later (otherwise
ld SP,*,LINK;ptabs LINK;trn;blink trn,r63 becomes a critical path) */
ori LINK, 0, r35
blink tr0, LINK
/* Copy completed normally if we get back here */
ptabs r35, tr0
ld.q SP, 24, r35
/* don't restore r2-r4, pointless */
/* set result=r2 to zero as the copy must have succeeded. */
or r63, r63, r2
addi SP, 32, SP
blink tr0, r63 ! RTS
.global __copy_user_fixup
__copy_user_fixup:
/* Restore stack frame */
ori r35, 0, LINK
ld.q SP, 24, r35
ld.q SP, 16, r4
ld.q SP, 8, r3
ld.q SP, 0, r2
addi SP, 32, SP
/* Fall through to original code, in the 'same' state we entered with */
/* The slow byte-by-byte method is used if the fast copy traps due to a bad
user address. In that rare case, the speed drop can be tolerated. */
__copy_user_byte_by_byte:
pta ___copy_user_exit, tr1
pta ___copy_user1, tr0
beq/u r4, r63, tr1 /* early exit for zero length copy */
sub r2, r3, r0
addi r0, -1, r0
___copy_user1:
ld.b r3, 0, r5 /* Fault address 1 */
/* Could rewrite this to use just 1 add, but the second comes 'free'
due to load latency */
addi r3, 1, r3
addi r4, -1, r4 /* No real fixup required */
___copy_user2:
stx.b r3, r0, r5 /* Fault address 2 */
bne r4, ZERO, tr0
___copy_user_exit:
or r4, ZERO, r2
ptabs LINK, tr0
blink tr0, ZERO
/*
* __kernel_size_t __clear_user(void *addr, __kernel_size_t size)
*
* Inputs:
* (r2) target address
* (r3) size in bytes
*
* Ouputs:
* (*r2) zero-ed target data
* (r2) non-zero-ed bytes
*/
.global __clear_user
__clear_user:
pta ___clear_user_exit, tr1
pta ___clear_user1, tr0
beq/u r3, r63, tr1
___clear_user1:
st.b r2, 0, ZERO /* Fault address */
addi r2, 1, r2
addi r3, -1, r3 /* No real fixup required */
bne r3, ZERO, tr0
___clear_user_exit:
or r3, ZERO, r2
ptabs LINK, tr0
blink tr0, ZERO
#endif /* CONFIG_MMU */
/*
* extern long __get_user_asm_?(void *val, long addr)
*
* Inputs:
* (r2) dest address
* (r3) source address (in User Space)
*
* Ouputs:
* (r2) -EFAULT (faulting)
* 0 (not faulting)
*/
.global __get_user_asm_b
__get_user_asm_b:
or r2, ZERO, r4
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___get_user_asm_b1:
ld.b r3, 0, r5 /* r5 = data */
st.b r4, 0, r5
or ZERO, ZERO, r2
___get_user_asm_b_exit:
ptabs LINK, tr0
blink tr0, ZERO
.global __get_user_asm_w
__get_user_asm_w:
or r2, ZERO, r4
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___get_user_asm_w1:
ld.w r3, 0, r5 /* r5 = data */
st.w r4, 0, r5
or ZERO, ZERO, r2
___get_user_asm_w_exit:
ptabs LINK, tr0
blink tr0, ZERO
.global __get_user_asm_l
__get_user_asm_l:
or r2, ZERO, r4
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___get_user_asm_l1:
ld.l r3, 0, r5 /* r5 = data */
st.l r4, 0, r5
or ZERO, ZERO, r2
___get_user_asm_l_exit:
ptabs LINK, tr0
blink tr0, ZERO
.global __get_user_asm_q
__get_user_asm_q:
or r2, ZERO, r4
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___get_user_asm_q1:
ld.q r3, 0, r5 /* r5 = data */
st.q r4, 0, r5
or ZERO, ZERO, r2
___get_user_asm_q_exit:
ptabs LINK, tr0
blink tr0, ZERO
/*
* extern long __put_user_asm_?(void *pval, long addr)
*
* Inputs:
* (r2) kernel pointer to value
* (r3) dest address (in User Space)
*
* Ouputs:
* (r2) -EFAULT (faulting)
* 0 (not faulting)
*/
.global __put_user_asm_b
__put_user_asm_b:
ld.b r2, 0, r4 /* r4 = data */
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___put_user_asm_b1:
st.b r3, 0, r4
or ZERO, ZERO, r2
___put_user_asm_b_exit:
ptabs LINK, tr0
blink tr0, ZERO
.global __put_user_asm_w
__put_user_asm_w:
ld.w r2, 0, r4 /* r4 = data */
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___put_user_asm_w1:
st.w r3, 0, r4
or ZERO, ZERO, r2
___put_user_asm_w_exit:
ptabs LINK, tr0
blink tr0, ZERO
.global __put_user_asm_l
__put_user_asm_l:
ld.l r2, 0, r4 /* r4 = data */
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___put_user_asm_l1:
st.l r3, 0, r4
or ZERO, ZERO, r2
___put_user_asm_l_exit:
ptabs LINK, tr0
blink tr0, ZERO
.global __put_user_asm_q
__put_user_asm_q:
ld.q r2, 0, r4 /* r4 = data */
movi -(EFAULT), r2 /* r2 = reply, no real fixup */
___put_user_asm_q1:
st.q r3, 0, r4
or ZERO, ZERO, r2
___put_user_asm_q_exit:
ptabs LINK, tr0
blink tr0, ZERO
panic_stash_regs:
/* The idea is : when we get an unhandled panic, we dump the registers
to a known memory location, the just sit in a tight loop.
This allows the human to look at the memory region through the GDB
session (assuming the debug module's SHwy initiator isn't locked up
or anything), to hopefully analyze the cause of the panic. */
/* On entry, former r15 (SP) is in DCR
former r0 is at resvec_saved_area + 0
former r1 is at resvec_saved_area + 8
former tr0 is at resvec_saved_area + 32
DCR is the only register whose value is lost altogether.
*/
movi 0xffffffff80000000, r0 ! phy of dump area
ld.q SP, 0x000, r1 ! former r0
st.q r0, 0x000, r1
ld.q SP, 0x008, r1 ! former r1
st.q r0, 0x008, r1
st.q r0, 0x010, r2
st.q r0, 0x018, r3
st.q r0, 0x020, r4
st.q r0, 0x028, r5
st.q r0, 0x030, r6
st.q r0, 0x038, r7
st.q r0, 0x040, r8
st.q r0, 0x048, r9
st.q r0, 0x050, r10
st.q r0, 0x058, r11
st.q r0, 0x060, r12
st.q r0, 0x068, r13
st.q r0, 0x070, r14
getcon dcr, r14
st.q r0, 0x078, r14
st.q r0, 0x080, r16
st.q r0, 0x088, r17
st.q r0, 0x090, r18
st.q r0, 0x098, r19
st.q r0, 0x0a0, r20
st.q r0, 0x0a8, r21
st.q r0, 0x0b0, r22
st.q r0, 0x0b8, r23
st.q r0, 0x0c0, r24
st.q r0, 0x0c8, r25
st.q r0, 0x0d0, r26
st.q r0, 0x0d8, r27
st.q r0, 0x0e0, r28
st.q r0, 0x0e8, r29
st.q r0, 0x0f0, r30
st.q r0, 0x0f8, r31
st.q r0, 0x100, r32
st.q r0, 0x108, r33
st.q r0, 0x110, r34
st.q r0, 0x118, r35
st.q r0, 0x120, r36
st.q r0, 0x128, r37
st.q r0, 0x130, r38
st.q r0, 0x138, r39
st.q r0, 0x140, r40
st.q r0, 0x148, r41
st.q r0, 0x150, r42
st.q r0, 0x158, r43
st.q r0, 0x160, r44
st.q r0, 0x168, r45
st.q r0, 0x170, r46
st.q r0, 0x178, r47
st.q r0, 0x180, r48
st.q r0, 0x188, r49
st.q r0, 0x190, r50
st.q r0, 0x198, r51
st.q r0, 0x1a0, r52
st.q r0, 0x1a8, r53
st.q r0, 0x1b0, r54
st.q r0, 0x1b8, r55
st.q r0, 0x1c0, r56
st.q r0, 0x1c8, r57
st.q r0, 0x1d0, r58
st.q r0, 0x1d8, r59
st.q r0, 0x1e0, r60
st.q r0, 0x1e8, r61
st.q r0, 0x1f0, r62
st.q r0, 0x1f8, r63 ! bogus, but for consistency's sake...
ld.q SP, 0x020, r1 ! former tr0
st.q r0, 0x200, r1
gettr tr1, r1
st.q r0, 0x208, r1
gettr tr2, r1
st.q r0, 0x210, r1
gettr tr3, r1
st.q r0, 0x218, r1
gettr tr4, r1
st.q r0, 0x220, r1
gettr tr5, r1
st.q r0, 0x228, r1
gettr tr6, r1
st.q r0, 0x230, r1
gettr tr7, r1
st.q r0, 0x238, r1
getcon sr, r1
getcon ssr, r2
getcon pssr, r3
getcon spc, r4
getcon pspc, r5
getcon intevt, r6
getcon expevt, r7
getcon pexpevt, r8
getcon tra, r9
getcon tea, r10
getcon kcr0, r11
getcon kcr1, r12
getcon vbr, r13
getcon resvec, r14
st.q r0, 0x240, r1
st.q r0, 0x248, r2
st.q r0, 0x250, r3
st.q r0, 0x258, r4
st.q r0, 0x260, r5
st.q r0, 0x268, r6
st.q r0, 0x270, r7
st.q r0, 0x278, r8
st.q r0, 0x280, r9
st.q r0, 0x288, r10
st.q r0, 0x290, r11
st.q r0, 0x298, r12
st.q r0, 0x2a0, r13
st.q r0, 0x2a8, r14
getcon SPC,r2
getcon SSR,r3
getcon EXPEVT,r4
/* Prepare to jump to C - physical address */
movi panic_handler-[31mCONFIG_PAGE_OFFSET[0m, r1
ori r1, 1, r1
ptabs r1, tr0
getcon DCR, SP
blink tr0, ZERO
nop
nop
nop
nop
/*
* --- Signal Handling Section
*/
/*
* extern long long _sa_default_rt_restorer
* extern long long _sa_default_restorer
*
* or, better,
*
* extern void _sa_default_rt_restorer(void)
* extern void _sa_default_restorer(void)
*
* Code prototypes to do a sys_rt_sigreturn() or sys_sysreturn()
* from user space. Copied into user space by signal management.
* Both must be quad aligned and 2 quad long (4 instructions).
*
*/
.balign 8
.global sa_default_rt_restorer
sa_default_rt_restorer:
movi 0x10, r9
shori __NR_rt_sigreturn, r9
trapa r9
nop
.balign 8
.global sa_default_restorer
sa_default_restorer:
movi 0x10, r9
shori __NR_sigreturn, r9
trapa r9
nop
/*
* --- __ex_table Section
*/
/*
* User Access Exception Table.
*/
.section __ex_table, "a"
.global asm_uaccess_start /* Just a marker */
asm_uaccess_start:
#ifdef [31mCONFIG_MMU[0m
.long ___copy_user1, ___copy_user_exit
.long ___copy_user2, ___copy_user_exit
.long ___clear_user1, ___clear_user_exit
#endif
.long ___get_user_asm_b1, ___get_user_asm_b_exit
.long ___get_user_asm_w1, ___get_user_asm_w_exit
.long ___get_user_asm_l1, ___get_user_asm_l_exit
.long ___get_user_asm_q1, ___get_user_asm_q_exit
.long ___put_user_asm_b1, ___put_user_asm_b_exit
.long ___put_user_asm_w1, ___put_user_asm_w_exit
.long ___put_user_asm_l1, ___put_user_asm_l_exit
.long ___put_user_asm_q1, ___put_user_asm_q_exit
.global asm_uaccess_end /* Just a marker */
asm_uaccess_end:
/*
* --- .init.text Section
*/
__INIT
/*
* void trap_init (void)
*
*/
.global trap_init
trap_init:
addi SP, -24, SP /* Room to save r28/r29/r30 */
st.q SP, 0, r28
st.q SP, 8, r29
st.q SP, 16, r30
/* Set VBR and RESVEC */
movi LVBR_block, r19
andi r19, -4, r19 /* reset MMUOFF + reserved */
/* For RESVEC exceptions we force the MMU off, which means we need the
physical address. */
movi LRESVEC_block-[31mCONFIG_PAGE_OFFSET[0m, r20
andi r20, -4, r20 /* reset reserved */
ori r20, 1, r20 /* set MMUOFF */
putcon r19, VBR
putcon r20, RESVEC
/* Sanity check */
movi LVBR_block_end, r21
andi r21, -4, r21
movi BLOCK_SIZE, r29 /* r29 = expected size */
or r19, ZERO, r30
add r19, r29, r19
/*
* Ugly, but better loop forever now than crash afterwards.
* We should print a message, but if we touch LVBR or
* LRESVEC blocks we should not be surprised if we get stuck
* in trap_init().
*/
pta trap_init_loop, tr1
gettr tr1, r28 /* r28 = trap_init_loop */
sub r21, r30, r30 /* r30 = actual size */
/*
* VBR/RESVEC handlers overlap by being bigger than
* allowed. Very bad. Just loop forever.
* (r28) panic/loop address
* (r29) expected size
* (r30) actual size
*/
trap_init_loop:
bne r19, r21, tr1
/* Now that exception vectors are set up reset SR.BL */
getcon SR, r22
movi SR_UNBLOCK_EXC, r23
and r22, r23, r22
putcon r22, SR
addi SP, 24, SP
ptabs LINK, tr0
blink tr0, ZERO