/*
* Copyright © 2014 Intel Corporation
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
* IN THE SOFTWARE.
*/
#include "i915_params.h"
#include "i915_drv.h"
struct i915_params i915 __read_mostly = {
.modeset = -1,
.panel_ignore_lid = 1,
.semaphores = -1,
.lvds_channel_mode = 0,
.panel_use_ssc = -1,
.vbt_sdvo_panel_type = -1,
.enable_rc6 = -1,
.enable_dc = -1,
.enable_fbc = -1,
.enable_execlists = -1,
.enable_hangcheck = true,
.enable_ppgtt = -1,
.enable_psr = -1,
.alpha_support = IS_ENABLED([31mCONFIG_DRM_I915_ALPHA_SUPPORT[0m),
.disable_power_well = -1,
.enable_ips = 1,
.fastboot = 0,
.prefault_disable = 0,
.load_detect_test = 0,
.force_reset_modeset_test = 0,
.reset = true,
.error_capture = true,
.invert_brightness = 0,
.disable_display = 0,
.enable_cmd_parser = 1,
.use_mmio_flip = 0,
.mmio_debug = 0,
.verbose_state_checks = 1,
.nuclear_pageflip = 0,
.edp_vswing = 0,
.enable_guc_loading = 0,
.enable_guc_submission = 0,
.guc_log_level = -1,
.enable_dp_mst = true,
.inject_load_failure = 0,
.enable_dpcd_backlight = false,
.enable_gvt = false,
};
module_param_named(modeset, i915.modeset, int, 0400);
MODULE_PARM_DESC(modeset,
"Use kernel modesetting [KMS] (0=disable, "
"1=on, -1=force vga console preference [default])");
module_param_named_unsafe(panel_ignore_lid, i915.panel_ignore_lid, int, 0600);
MODULE_PARM_DESC(panel_ignore_lid,
"Override lid status (0=autodetect, 1=autodetect disabled [default], "
"-1=force lid closed, -2=force lid open)");
module_param_named_unsafe(semaphores, i915.semaphores, int, 0400);
MODULE_PARM_DESC(semaphores,
"Use semaphores for inter-ring sync "
"(default: -1 (use per-chip defaults))");
module_param_named_unsafe(enable_rc6, i915.enable_rc6, int, 0400);
MODULE_PARM_DESC(enable_rc6,
"Enable power-saving render C-state 6. "
"Different stages can be selected via bitmask values "
"(0 = disable; 1 = enable rc6; 2 = enable deep rc6; 4 = enable deepest rc6). "
"For example, 3 would enable rc6 and deep rc6, and 7 would enable everything. "
"default: -1 (use per-chip default)");
module_param_named_unsafe(enable_dc, i915.enable_dc, int, 0400);
MODULE_PARM_DESC(enable_dc,
"Enable power-saving display C-states. "
"(-1=auto [default]; 0=disable; 1=up to DC5; 2=up to DC6)");
module_param_named_unsafe(enable_fbc, i915.enable_fbc, int, 0600);
MODULE_PARM_DESC(enable_fbc,
"Enable frame buffer compression for power savings "
"(default: -1 (use per-chip default))");
module_param_named_unsafe(lvds_channel_mode, i915.lvds_channel_mode, int, 0400);
MODULE_PARM_DESC(lvds_channel_mode,
"Specify LVDS channel mode "
"(0=probe BIOS [default], 1=single-channel, 2=dual-channel)");
module_param_named_unsafe(lvds_use_ssc, i915.panel_use_ssc, int, 0600);
MODULE_PARM_DESC(lvds_use_ssc,
"Use Spread Spectrum Clock with panels [LVDS/eDP] "
"(default: auto from VBT)");
module_param_named_unsafe(vbt_sdvo_panel_type, i915.vbt_sdvo_panel_type, int, 0400);
MODULE_PARM_DESC(vbt_sdvo_panel_type,
"Override/Ignore selection of SDVO panel mode in the VBT "
"(-2=ignore, -1=auto [default], index in VBT BIOS table)");
module_param_named_unsafe(reset, i915.reset, bool, 0600);
MODULE_PARM_DESC(reset, "Attempt GPU resets (default: true)");
#if IS_ENABLED([31mCONFIG_DRM_I915_CAPTURE_ERROR[0m)
module_param_named(error_capture, i915.error_capture, bool, 0600);
MODULE_PARM_DESC(error_capture,
"Record the GPU state following a hang. "
"This information in /sys/class/drm/card<N>/error is vital for "
"triaging and debugging hangs.");
#endif
module_param_named_unsafe(enable_hangcheck, i915.enable_hangcheck, bool, 0644);
MODULE_PARM_DESC(enable_hangcheck,
"Periodically check GPU activity for detecting hangs. "
"WARNING: Disabling this can cause system wide hangs. "
"(default: true)");
module_param_named_unsafe(enable_ppgtt, i915.enable_ppgtt, int, 0400);
MODULE_PARM_DESC(enable_ppgtt,
"Override PPGTT usage. "
"(-1=auto [default], 0=disabled, 1=aliasing, 2=full, 3=full with extended address space)");
module_param_named_unsafe(enable_execlists, i915.enable_execlists, int, 0400);
MODULE_PARM_DESC(enable_execlists,
"Override execlists usage. "
"(-1=auto [default], 0=disabled, 1=enabled)");
module_param_named_unsafe(enable_psr, i915.enable_psr, int, 0600);
MODULE_PARM_DESC(enable_psr, "Enable PSR "
"(0=disabled, 1=enabled - link mode chosen per-platform, 2=force link-standby mode, 3=force link-off mode) "
"Default: -1 (use per-chip default)");
module_param_named_unsafe(alpha_support, i915.alpha_support, int, 0400);
MODULE_PARM_DESC(alpha_support,
"Enable alpha quality driver support for latest hardware. "
"See also CONFIG_DRM_I915_ALPHA_SUPPORT.");
module_param_named_unsafe(disable_power_well, i915.disable_power_well, int, 0400);
MODULE_PARM_DESC(disable_power_well,
"Disable display power wells when possible "
"(-1=auto [default], 0=power wells always on, 1=power wells disabled when possible)");
module_param_named_unsafe(enable_ips, i915.enable_ips, int, 0600);
MODULE_PARM_DESC(enable_ips, "Enable IPS (default: true)");
module_param_named(fastboot, i915.fastboot, bool, 0600);
MODULE_PARM_DESC(fastboot,
"Try to skip unnecessary mode sets at boot time (default: false)");
module_param_named_unsafe(prefault_disable, i915.prefault_disable, bool, 0600);
MODULE_PARM_DESC(prefault_disable,
"Disable page prefaulting for pread/pwrite/reloc (default:false). "
"For developers only.");
module_param_named_unsafe(load_detect_test, i915.load_detect_test, bool, 0600);
MODULE_PARM_DESC(load_detect_test,
"Force-enable the VGA load detect code for testing (default:false). "
"For developers only.");
module_param_named_unsafe(force_reset_modeset_test, i915.force_reset_modeset_test, bool, 0600);
MODULE_PARM_DESC(force_reset_modeset_test,
"Force a modeset during gpu reset for testing (default:false). "
"For developers only.");
module_param_named_unsafe(invert_brightness, i915.invert_brightness, int, 0600);
MODULE_PARM_DESC(invert_brightness,
"Invert backlight brightness "
"(-1 force normal, 0 machine defaults, 1 force inversion), please "
"report PCI device ID, subsystem vendor and subsystem device ID "
"to dri-devel@lists.freedesktop.org, if your machine needs it. "
"It will then be included in an upcoming module version.");
module_param_named(disable_display, i915.disable_display, bool, 0400);
MODULE_PARM_DESC(disable_display, "Disable display (default: false)");
module_param_named_unsafe(enable_cmd_parser, i915.enable_cmd_parser, int, 0600);
MODULE_PARM_DESC(enable_cmd_parser,
"Enable command parsing (1=enabled [default], 0=disabled)");
module_param_named_unsafe(use_mmio_flip, i915.use_mmio_flip, int, 0600);
MODULE_PARM_DESC(use_mmio_flip,
"use MMIO flips (-1=never, 0=driver discretion [default], 1=always)");
module_param_named(mmio_debug, i915.mmio_debug, int, 0600);
MODULE_PARM_DESC(mmio_debug,
"Enable the MMIO debug code for the first N failures (default: off). "
"This may negatively affect performance.");
module_param_named(verbose_state_checks, i915.verbose_state_checks, bool, 0600);
MODULE_PARM_DESC(verbose_state_checks,
"Enable verbose logs (ie. WARN_ON()) in case of unexpected hw state conditions.");
module_param_named_unsafe(nuclear_pageflip, i915.nuclear_pageflip, bool, 0600);
MODULE_PARM_DESC(nuclear_pageflip,
"Force atomic modeset functionality; asynchronous mode is not yet supported. (default: false).");
/* WA to get away with the default setting in VBT for early platforms.Will be removed */
module_param_named_unsafe(edp_vswing, i915.edp_vswing, int, 0400);
MODULE_PARM_DESC(edp_vswing,
"Ignore/Override vswing pre-emph table selection from VBT "
"(0=use value from vbt [default], 1=low power swing(200mV),"
"2=default swing(400mV))");
module_param_named_unsafe(enable_guc_loading, i915.enable_guc_loading, int, 0400);
MODULE_PARM_DESC(enable_guc_loading,
"Enable GuC firmware loading "
"(-1=auto, 0=never [default], 1=if available, 2=required)");
module_param_named_unsafe(enable_guc_submission, i915.enable_guc_submission, int, 0400);
MODULE_PARM_DESC(enable_guc_submission,
"Enable GuC submission "
"(-1=auto, 0=never [default], 1=if available, 2=required)");
module_param_named(guc_log_level, i915.guc_log_level, int, 0400);
MODULE_PARM_DESC(guc_log_level,
"GuC firmware logging level (-1:disabled (default), 0-3:enabled)");
module_param_named_unsafe(enable_dp_mst, i915.enable_dp_mst, bool, 0600);
MODULE_PARM_DESC(enable_dp_mst,
"Enable multi-stream transport (MST) for new DisplayPort sinks. (default: true)");
module_param_named_unsafe(inject_load_failure, i915.inject_load_failure, uint, 0400);
MODULE_PARM_DESC(inject_load_failure,
"Force an error after a number of failure check points (0:disabled (default), N:force failure at the Nth failure check point)");
module_param_named(enable_dpcd_backlight, i915.enable_dpcd_backlight, bool, 0600);
MODULE_PARM_DESC(enable_dpcd_backlight,
"Enable support for DPCD backlight control (default:false)");
module_param_named(enable_gvt, i915.enable_gvt, bool, 0400);
MODULE_PARM_DESC(enable_gvt,
"Enable support for Intel GVT-g graphics virtualization host support(default:false)");