obj-$([31mCONFIG_PCIE_DW[0m) += pcie-designware.o obj-$([31mCONFIG_PCIE_DW_PLAT[0m) += pcie-designware-plat.o obj-$([31mCONFIG_PCI_DRA7XX[0m) += pci-dra7xx.o obj-$([31mCONFIG_PCI_EXYNOS[0m) += pci-exynos.o obj-$([31mCONFIG_PCI_IMX6[0m) += pci-imx6.o obj-$([31mCONFIG_PCI_HYPERV[0m) += pci-hyperv.o obj-$([31mCONFIG_PCI_MVEBU[0m) += pci-mvebu.o obj-$([31mCONFIG_PCI_AARDVARK[0m) += pci-aardvark.o obj-$([31mCONFIG_PCI_TEGRA[0m) += pci-tegra.o obj-$([31mCONFIG_PCI_RCAR_GEN2[0m) += pci-rcar-gen2.o obj-$([31mCONFIG_PCIE_RCAR[0m) += pcie-rcar.o obj-$([31mCONFIG_PCI_HOST_COMMON[0m) += pci-host-common.o obj-$([31mCONFIG_PCI_HOST_GENERIC[0m) += pci-host-generic.o obj-$([31mCONFIG_PCIE_SPEAR13XX[0m) += pcie-spear13xx.o obj-$([31mCONFIG_PCI_KEYSTONE[0m) += pci-keystone-dw.o pci-keystone.o obj-$([31mCONFIG_PCIE_XILINX[0m) += pcie-xilinx.o obj-$([31mCONFIG_PCIE_XILINX_NWL[0m) += pcie-xilinx-nwl.o obj-$([31mCONFIG_PCI_XGENE_MSI[0m) += pci-xgene-msi.o obj-$([31mCONFIG_PCI_LAYERSCAPE[0m) += pci-layerscape.o obj-$([31mCONFIG_PCI_VERSATILE[0m) += pci-versatile.o obj-$([31mCONFIG_PCIE_IPROC[0m) += pcie-iproc.o obj-$([31mCONFIG_PCIE_IPROC_MSI[0m) += pcie-iproc-msi.o obj-$([31mCONFIG_PCIE_IPROC_PLATFORM[0m) += pcie-iproc-platform.o obj-$([31mCONFIG_PCIE_IPROC_BCMA[0m) += pcie-iproc-bcma.o obj-$([31mCONFIG_PCIE_ALTERA[0m) += pcie-altera.o obj-$([31mCONFIG_PCIE_ALTERA_MSI[0m) += pcie-altera-msi.o obj-$([31mCONFIG_PCIE_QCOM[0m) += pcie-qcom.o obj-$([31mCONFIG_PCIE_ARMADA_8K[0m) += pcie-armada8k.o obj-$([31mCONFIG_PCIE_ARTPEC6[0m) += pcie-artpec6.o obj-$([31mCONFIG_PCIE_ROCKCHIP[0m) += pcie-rockchip.o obj-$([31mCONFIG_VMD[0m) += vmd.o # The following drivers are for devices that use the generic ACPI # pci_root.c driver but don't support standard ECAM config access. # They contain MCFG quirks to replace the generic ECAM accessors with # device-specific ones that are shared with the DT driver. # The ACPI driver is generic and should not require driver-specific # config options to be enabled, so we always build these drivers on # ARM64 and use internal ifdefs to only build the pieces we need # depending on whether ACPI, the DT driver, or both are enabled. obj-$([31mCONFIG_ARM64[0m) += pcie-hisi.o obj-$([31mCONFIG_ARM64[0m) += pci-thunder-ecam.o obj-$([31mCONFIG_ARM64[0m) += pci-thunder-pem.o obj-$([31mCONFIG_ARM64[0m) += pci-xgene.o |