#
# [31mCONFIG_PCCARD[0m ([31mCONFIG_PCMCIA[0m/CardBus) bus subsystem configuration
#
menuconfig [31mCONFIG_PCCARD[0m
tristate "PCCard (PCMCIA/CardBus) support"
---help---
Say Y here if you want to attach [31mCONFIG_PCMCIA[0m- or PC-cards to your Linux
computer. These are credit-card size devices such as network cards,
modems or hard drives often used with laptops computers. There are
actually two varieties of these cards: 16 bit [31mCONFIG_PCMCIA[0m and 32 bit
CardBus cards.
To compile this driver as modules, choose [31mCONFIG_M[0m here: the
module will be called pcmcia_core.
if [31mCONFIG_PCCARD[0m
config [31mCONFIG_PCMCIA[0m
tristate "16-bit PCMCIA support"
select [31mCONFIG_CRC32[0m
default y
---help---
This option enables support for 16-bit [31mCONFIG_PCMCIA[0m cards. Most older
PC-cards are such 16-bit [31mCONFIG_PCMCIA[0m cards, so unless you know you're
only using 32-bit CardBus cards, say Y or [31mCONFIG_M[0m here.
To use 16-bit [31mCONFIG_PCMCIA[0m cards, you will need supporting software in
most cases. (see the file <file:Documentation/Changes> for
location and details).
To compile this driver as modules, choose [31mCONFIG_M[0m here: the
module will be called pcmcia.
If unsure, say Y.
config [31mCONFIG_PCMCIA_LOAD_CIS[0m
bool "Load CIS updates from userspace"
depends on [31mCONFIG_PCMCIA[0m
select [31mCONFIG_FW_LOADER[0m
default y
help
Some [31mCONFIG_PCMCIA[0m cards require an updated Card Information Structure (CIS)
to be loaded from userspace to work correctly. If you say Y here,
and your userspace is arranged correctly, this will be loaded
automatically using the in-kernel firmware loader and the hotplug
subsystem, instead of relying on cardmgr from pcmcia-cs to do so.
If unsure, say Y.
config [31mCONFIG_CARDBUS[0m
bool "32-bit CardBus support"
depends on [31mCONFIG_PCI[0m
default y
---help---
CardBus is a bus mastering architecture for PC-cards, which allows
for 32 bit PC-cards (the original [31mCONFIG_PCMCIA[0m standard specifies only
a 16 bit wide bus). Many newer PC-cards are actually CardBus cards.
To use 32 bit PC-cards, you also need a CardBus compatible host
bridge. Virtually all modern [31mCONFIG_PCMCIA[0m bridges do this, and most of
them are "yenta-compatible", so say Y or [31mCONFIG_M[0m there, too.
If unsure, say Y.
comment "PC-card bridges"
config [31mCONFIG_YENTA[0m
tristate "CardBus yenta-compatible bridge support"
depends on [31mCONFIG_PCI[0m
select [31mCONFIG_CARDBUS[0m if ![31mCONFIG_EXPERT[0m
select [31mCONFIG_PCCARD_NONSTATIC[0m if [31mCONFIG_PCMCIA[0m != n
---help---
This option enables support for CardBus host bridges. Virtually
all modern [31mCONFIG_PCMCIA[0m bridges are CardBus compatible. [31mCONFIG_A[0m "bridge" is
the hardware inside your computer that [31mCONFIG_PCMCIA[0m cards are plugged
into.
To compile this driver as modules, choose [31mCONFIG_M[0m here: the
module will be called yenta_socket.
If unsure, say Y.
config [31mCONFIG_YENTA_O2[0m
default y
bool "Special initialization for O2Micro bridges" if [31mCONFIG_EXPERT[0m
depends on [31mCONFIG_YENTA[0m
config [31mCONFIG_YENTA_RICOH[0m
default y
bool "Special initialization for Ricoh bridges" if [31mCONFIG_EXPERT[0m
depends on [31mCONFIG_YENTA[0m
config [31mCONFIG_YENTA_TI[0m
default y
bool "Special initialization for TI and EnE bridges" if [31mCONFIG_EXPERT[0m
depends on [31mCONFIG_YENTA[0m
config [31mCONFIG_YENTA_ENE_TUNE[0m
default y
bool "Auto-tune EnE bridges for CB cards" if [31mCONFIG_EXPERT[0m
depends on [31mCONFIG_YENTA_TI[0m && [31mCONFIG_CARDBUS[0m
config [31mCONFIG_YENTA_TOSHIBA[0m
default y
bool "Special initialization for Toshiba ToPIC bridges" if [31mCONFIG_EXPERT[0m
depends on [31mCONFIG_YENTA[0m
config [31mCONFIG_PD6729[0m
tristate "Cirrus PD6729 compatible bridge support"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_PCI[0m
select [31mCONFIG_PCCARD_NONSTATIC[0m
help
This provides support for the Cirrus [31mCONFIG_PD6729[0m [31mCONFIG_PCI[0m-to-[31mCONFIG_PCMCIA[0m bridge
device, found in some older laptops and [31mCONFIG_PCMCIA[0m card readers.
config [31mCONFIG_I82092[0m
tristate "i82092 compatible bridge support"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_PCI[0m
select [31mCONFIG_PCCARD_NONSTATIC[0m
help
This provides support for the Intel I82092AA [31mCONFIG_PCI[0m-to-[31mCONFIG_PCMCIA[0m bridge device,
found in some older laptops and more commonly in evaluation boards for the
chip.
config [31mCONFIG_I82365[0m
tristate "i82365 compatible bridge support"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_ISA[0m
select [31mCONFIG_PCCARD_NONSTATIC[0m
help
Say Y here to include support for [31mCONFIG_ISA[0m-bus [31mCONFIG_PCMCIA[0m host bridges that
are register compatible with the Intel i82365. These are found on
older laptops and [31mCONFIG_ISA[0m-bus card readers for desktop systems. [31mCONFIG_A[0m
"bridge" is the hardware inside your computer that [31mCONFIG_PCMCIA[0m cards are
plugged into. If unsure, say N.
config [31mCONFIG_TCIC[0m
tristate "Databook TCIC host bridge support"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_ISA[0m
select [31mCONFIG_PCCARD_NONSTATIC[0m
help
Say Y here to include support for the Databook [31mCONFIG_TCIC[0m family of [31mCONFIG_PCMCIA[0m
host bridges. These are only found on a handful of old systems.
"Bridge" is the name used for the hardware inside your computer that
[31mCONFIG_PCMCIA[0m cards are plugged into. If unsure, say N.
config [31mCONFIG_PCMCIA_ALCHEMY_DEVBOARD[0m
tristate "Alchemy Db/Pb1xxx PCMCIA socket services"
depends on [31mCONFIG_MIPS_ALCHEMY[0m && [31mCONFIG_PCMCIA[0m
help
Enable this driver of you want [31mCONFIG_PCMCIA[0m support on your Alchemy
Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200, DB1300
board. NOT suitable for the PB1000!
This driver is also available as a module called db1xxx_ss.ko
config [31mCONFIG_PCMCIA_XXS1500[0m
tristate "MyCable XXS1500 PCMCIA socket support"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_MIPS_XXS1500[0m
help
Support for the [31mCONFIG_PCMCIA[0m/CF socket interface on MyCable XXS1500
systems.
This driver is also available as a module called xxs1500_ss.ko
config [31mCONFIG_PCMCIA_BCM63XX[0m
tristate "bcm63xx pcmcia support"
depends on [31mCONFIG_BCM63XX[0m && [31mCONFIG_PCMCIA[0m
config [31mCONFIG_PCMCIA_SOC_COMMON[0m
tristate
config [31mCONFIG_PCMCIA_SA11XX_BASE[0m
tristate
config [31mCONFIG_PCMCIA_SA1100[0m
tristate "SA1100 support"
depends on [31mCONFIG_ARM[0m && [31mCONFIG_ARCH_SA1100[0m && [31mCONFIG_PCMCIA[0m
select [31mCONFIG_PCMCIA_SOC_COMMON[0m
select [31mCONFIG_PCMCIA_SA11XX_BASE[0m
help
Say Y here to include support for SA11x0-based [31mCONFIG_PCMCIA[0m or CF
sockets, found on HP iPAQs, Yopy, and other StrongARM(R)/
Xscale(R) embedded machines.
This driver is also available as a module called sa1100_cs.
config [31mCONFIG_PCMCIA_SA1111[0m
tristate "SA1111 support"
depends on [31mCONFIG_ARM[0m && [31mCONFIG_SA1111[0m && [31mCONFIG_PCMCIA[0m
select [31mCONFIG_PCMCIA_SOC_COMMON[0m
select [31mCONFIG_PCMCIA_SA11XX_BASE[0m if [31mCONFIG_ARCH_SA1100[0m
select [31mCONFIG_PCMCIA_PXA2XX[0m if [31mCONFIG_ARCH_LUBBOCK[0m && [31mCONFIG_SA1111[0m
help
Say Y here to include support for [31mCONFIG_SA1111[0m-based [31mCONFIG_PCMCIA[0m or CF
sockets, found on the Jornada 720, Graphicsmaster and other
StrongARM(R)/Xscale(R) embedded machines.
This driver is also available as a module called sa1111_cs.
config [31mCONFIG_PCMCIA_PXA2XX[0m
tristate "PXA2xx support"
depends on [31mCONFIG_ARM[0m && [31mCONFIG_ARCH_PXA[0m && [31mCONFIG_PCMCIA[0m
depends on ([31mCONFIG_ARCH_LUBBOCK[0m || [31mCONFIG_MACH_MAINSTONE[0m || [31mCONFIG_PXA_SHARPSL[0m \
|| [31mCONFIG_MACH_ARMCORE[0m || [31mCONFIG_ARCH_PXA_PALM[0m || [31mCONFIG_TRIZEPS_PCMCIA[0m \
|| [31mCONFIG_ARCOM_PCMCIA[0m || [31mCONFIG_ARCH_PXA_ESERIES[0m || [31mCONFIG_MACH_STARGATE2[0m \
|| [31mCONFIG_MACH_VPAC270[0m || [31mCONFIG_MACH_BALLOON3[0m || [31mCONFIG_MACH_COLIBRI[0m \
|| [31mCONFIG_MACH_COLIBRI320[0m || [31mCONFIG_MACH_H4700[0m)
select [31mCONFIG_PCMCIA_SOC_COMMON[0m
help
Say Y here to include support for the PXA2xx [31mCONFIG_PCMCIA[0m controller
config [31mCONFIG_PCMCIA_DEBUG[0m
bool "Enable debugging"
depends on ([31mCONFIG_PCMCIA_SA1111[0m || [31mCONFIG_PCMCIA_SA1100[0m || [31mCONFIG_PCMCIA_PXA2XX[0m)
help
Say Y here to enable debugging for the SoC [31mCONFIG_PCMCIA[0m layer.
You will need to choose the debugging level either via the
kernel command line, or module options depending whether
you build the drivers as modules.
The kernel command line options are:
sa11xx_core.pc_debug=N
pxa2xx_core.pc_debug=N
The module option is called pc_debug=N
In all the above examples, N is the debugging verbosity
level.
config [31mCONFIG_PCMCIA_PROBE[0m
bool
default y if [31mCONFIG_ISA[0m && ![31mCONFIG_ARCH_SA1100[0m && ![31mCONFIG_PARISC[0m
config [31mCONFIG_M32R_PCC[0m
bool "M32R PCMCIA I/F"
depends on [31mCONFIG_M32R[0m && [31mCONFIG_CHIP_M32700[0m && [31mCONFIG_PCMCIA[0m
help
Say Y here to use the [31mCONFIG_M32R[0m [31mCONFIG_PCMCIA[0m controller.
config [31mCONFIG_M32R_CFC[0m
bool "M32R CF I/F Controller"
depends on [31mCONFIG_M32R[0m && ([31mCONFIG_PLAT_USRV[0m || [31mCONFIG_PLAT_M32700UT[0m || [31mCONFIG_PLAT_MAPPI2[0m || [31mCONFIG_PLAT_MAPPI3[0m || [31mCONFIG_PLAT_OPSPUT[0m)
help
Say Y here to use the [31mCONFIG_M32R[0m CompactFlash controller.
config [31mCONFIG_M32R_CFC_NUM[0m
int "M32R CF I/F number"
depends on [31mCONFIG_M32R_CFC[0m
default "1" if [31mCONFIG_PLAT_USRV[0m || [31mCONFIG_PLAT_M32700UT[0m || [31mCONFIG_PLAT_MAPPI2[0m || [31mCONFIG_PLAT_MAPPI3[0m || [31mCONFIG_PLAT_OPSPUT[0m
help
Set the number of [31mCONFIG_M32R[0m CF slots.
config [31mCONFIG_PCMCIA_VRC4171[0m
tristate "NEC VRC4171 Card Controllers support"
depends on [31mCONFIG_CPU_VR41XX[0m && [31mCONFIG_ISA[0m && [31mCONFIG_PCMCIA[0m
config [31mCONFIG_PCMCIA_VRC4173[0m
tristate "NEC VRC4173 CARDU support"
depends on [31mCONFIG_CPU_VR41XX[0m && [31mCONFIG_PCI[0m && [31mCONFIG_PCMCIA[0m
config [31mCONFIG_OMAP_CF[0m
tristate "OMAP CompactFlash Controller"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_ARCH_OMAP16XX[0m
help
Say Y here to support the CompactFlash controller on OMAP.
Note that this doesn't support "True IDE" mode.
config [31mCONFIG_BFIN_CFPCMCIA[0m
tristate "Blackfin CompactFlash PCMCIA Driver"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_BLACKFIN[0m
help
Say Y here to support the CompactFlash [31mCONFIG_PCMCIA[0m driver for Blackfin.
config [31mCONFIG_AT91_CF[0m
tristate "AT91 CompactFlash Controller"
depends on [31mCONFIG_PCI[0m
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_ARCH_AT91[0m
help
Say Y here to support the CompactFlash controller on AT91 chips.
Or choose [31mCONFIG_M[0m to compile the driver as a module named "at91_cf".
config [31mCONFIG_ELECTRA_CF[0m
tristate "Electra CompactFlash Controller"
depends on [31mCONFIG_PCMCIA[0m && [31mCONFIG_PPC_PASEMI[0m
help
Say Y here to support the CompactFlash controller on the
PA Semi Electra eval board.
config [31mCONFIG_PCCARD_NONSTATIC[0m
bool
config [31mCONFIG_PCCARD_IODYN[0m
bool
endif # [31mCONFIG_PCCARD[0m