Training courses

Kernel and Embedded Linux

Bootlin training courses

Embedded Linux, kernel,
Yocto Project, Buildroot, real-time,
graphics, boot time, debugging...

Bootlin logo

Elixir Cross Referencer

/*
 * Copyright (C) 2011 Marvell International Ltd. All rights reserved.
 *
 * This program is free software; you can redistribute  it and/or modify it
 * under  the terms of  the GNU General  Public License as published by the
 * Free Software Foundation;  either version 2 of the  License, or (at your
 * option) any later version.
 */

#ifndef __ASM_ARCH_REGS_USB_H
#define __ASM_ARCH_REGS_USB_H

#define PXA168_U2O_REGBASE	(0xd4208000)
#define PXA168_U2O_PHYBASE	(0xd4207000)

#define PXA168_U2H_REGBASE      (0xd4209000)
#define PXA168_U2H_PHYBASE      (0xd4206000)

#define MMP3_HSIC1_REGBASE	(0xf0001000)
#define MMP3_HSIC1_PHYBASE	(0xf0001800)

#define MMP3_HSIC2_REGBASE	(0xf0002000)
#define MMP3_HSIC2_PHYBASE	(0xf0002800)

#define MMP3_FSIC_REGBASE	(0xf0003000)
#define MMP3_FSIC_PHYBASE	(0xf0003800)


#define USB_REG_RANGE		(0x1ff)
#define USB_PHY_RANGE		(0xff)

/* registers */
#define U2x_CAPREGS_OFFSET       0x100

/* phy regs */
#define UTMI_REVISION		0x0
#define UTMI_CTRL		0x4
#define UTMI_PLL		0x8
#define UTMI_TX			0xc
#define UTMI_RX			0x10
#define UTMI_IVREF		0x14
#define UTMI_T0			0x18
#define UTMI_T1			0x1c
#define UTMI_T2			0x20
#define UTMI_T3			0x24
#define UTMI_T4			0x28
#define UTMI_T5			0x2c
#define UTMI_RESERVE		0x30
#define UTMI_USB_INT		0x34
#define UTMI_DBG_CTL		0x38
#define UTMI_OTG_ADDON		0x3c

/* For UTMICTRL Register */
#define UTMI_CTRL_USB_CLK_EN                    (1 << 31)
/* pxa168 */
#define UTMI_CTRL_SUSPEND_SET1                  (1 << 30)
#define UTMI_CTRL_SUSPEND_SET2                  (1 << 29)
#define UTMI_CTRL_RXBUF_PDWN                    (1 << 24)
#define UTMI_CTRL_TXBUF_PDWN                    (1 << 11)

#define UTMI_CTRL_INPKT_DELAY_SHIFT             30
#define UTMI_CTRL_INPKT_DELAY_SOF_SHIFT		28
#define UTMI_CTRL_PU_REF_SHIFT			20
#define UTMI_CTRL_ARC_PULLDN_SHIFT              12
#define UTMI_CTRL_PLL_PWR_UP_SHIFT              1
#define UTMI_CTRL_PWR_UP_SHIFT                  0

/* For UTMI_PLL Register */
#define UTMI_PLL_PLLCALI12_SHIFT		29
#define UTMI_PLL_PLLCALI12_MASK			(0x3 << 29)

#define UTMI_PLL_PLLVDD18_SHIFT			27
#define UTMI_PLL_PLLVDD18_MASK			(0x3 << 27)

#define UTMI_PLL_PLLVDD12_SHIFT			25
#define UTMI_PLL_PLLVDD12_MASK			(0x3 << 25)

#define UTMI_PLL_CLK_BLK_EN_SHIFT               24
#define CLK_BLK_EN                              (0x1 << 24)
#define PLL_READY                               (0x1 << 23)
#define KVCO_EXT                                (0x1 << 22)
#define VCOCAL_START                            (0x1 << 21)

#define UTMI_PLL_KVCO_SHIFT			15
#define UTMI_PLL_KVCO_MASK                      (0x7 << 15)

#define UTMI_PLL_ICP_SHIFT			12
#define UTMI_PLL_ICP_MASK                       (0x7 << 12)

#define UTMI_PLL_FBDIV_SHIFT                    4
#define UTMI_PLL_FBDIV_MASK                     (0xFF << 4)

#define UTMI_PLL_REFDIV_SHIFT                   0
#define UTMI_PLL_REFDIV_MASK                    (0xF << 0)

/* For UTMI_TX Register */
#define UTMI_TX_REG_EXT_FS_RCAL_SHIFT		27
#define UTMI_TX_REG_EXT_FS_RCAL_MASK		(0xf << 27)

#define UTMI_TX_REG_EXT_FS_RCAL_EN_SHIFT	26
#define UTMI_TX_REG_EXT_FS_RCAL_EN_MASK		(0x1 << 26)

#define UTMI_TX_TXVDD12_SHIFT                   22
#define UTMI_TX_TXVDD12_MASK                    (0x3 << 22)

#define UTMI_TX_CK60_PHSEL_SHIFT                17
#define UTMI_TX_CK60_PHSEL_MASK                 (0xf << 17)

#define UTMI_TX_IMPCAL_VTH_SHIFT                14
#define UTMI_TX_IMPCAL_VTH_MASK                 (0x7 << 14)

#define REG_RCAL_START                          (0x1 << 12)

#define UTMI_TX_LOW_VDD_EN_SHIFT                11

#define UTMI_TX_AMP_SHIFT			0
#define UTMI_TX_AMP_MASK			(0x7 << 0)

/* For UTMI_RX Register */
#define UTMI_REG_SQ_LENGTH_SHIFT                15
#define UTMI_REG_SQ_LENGTH_MASK                 (0x3 << 15)

#define UTMI_RX_SQ_THRESH_SHIFT                 4
#define UTMI_RX_SQ_THRESH_MASK                  (0xf << 4)

#define UTMI_OTG_ADDON_OTG_ON			(1 << 0)

/* For MMP3 USB Phy */
#define USB2_PLL_REG0		0x4
#define USB2_PLL_REG1		0x8
#define USB2_TX_REG0		0x10
#define USB2_TX_REG1		0x14
#define USB2_TX_REG2		0x18
#define USB2_RX_REG0		0x20
#define USB2_RX_REG1		0x24
#define USB2_RX_REG2		0x28
#define USB2_ANA_REG0		0x30
#define USB2_ANA_REG1		0x34
#define USB2_ANA_REG2		0x38
#define USB2_DIG_REG0		0x3C
#define USB2_DIG_REG1		0x40
#define USB2_DIG_REG2		0x44
#define USB2_DIG_REG3		0x48
#define USB2_TEST_REG0		0x4C
#define USB2_TEST_REG1		0x50
#define USB2_TEST_REG2		0x54
#define USB2_CHARGER_REG0	0x58
#define USB2_OTG_REG0		0x5C
#define USB2_PHY_MON0		0x60
#define USB2_RESETVE_REG0	0x64
#define USB2_ICID_REG0		0x78
#define USB2_ICID_REG1		0x7C

/* USB2_PLL_REG0 */
/* This is for Ax stepping */
#define USB2_PLL_FBDIV_SHIFT_MMP3		0
#define USB2_PLL_FBDIV_MASK_MMP3		(0xFF << 0)

#define USB2_PLL_REFDIV_SHIFT_MMP3		8
#define USB2_PLL_REFDIV_MASK_MMP3		(0xF << 8)

#define USB2_PLL_VDD12_SHIFT_MMP3		12
#define USB2_PLL_VDD18_SHIFT_MMP3		14

/* This is for B0 stepping */
#define USB2_PLL_FBDIV_SHIFT_MMP3_B0		0
#define USB2_PLL_REFDIV_SHIFT_MMP3_B0		9
#define USB2_PLL_VDD18_SHIFT_MMP3_B0		14
#define USB2_PLL_FBDIV_MASK_MMP3_B0		0x01FF
#define USB2_PLL_REFDIV_MASK_MMP3_B0		0x3E00

#define USB2_PLL_CAL12_SHIFT_MMP3		0
#define USB2_PLL_CALI12_MASK_MMP3		(0x3 << 0)

#define USB2_PLL_VCOCAL_START_SHIFT_MMP3	2

#define USB2_PLL_KVCO_SHIFT_MMP3		4
#define USB2_PLL_KVCO_MASK_MMP3			(0x7<<4)

#define USB2_PLL_ICP_SHIFT_MMP3			8
#define USB2_PLL_ICP_MASK_MMP3			(0x7<<8)

#define USB2_PLL_LOCK_BYPASS_SHIFT_MMP3		12

#define USB2_PLL_PU_PLL_SHIFT_MMP3		13
#define USB2_PLL_PU_PLL_MASK			(0x1 << 13)

#define USB2_PLL_READY_MASK_MMP3		(0x1 << 15)

/* USB2_TX_REG0 */
#define USB2_TX_IMPCAL_VTH_SHIFT_MMP3		8
#define USB2_TX_IMPCAL_VTH_MASK_MMP3		(0x7 << 8)

#define USB2_TX_RCAL_START_SHIFT_MMP3		13

/* USB2_TX_REG1 */
#define USB2_TX_CK60_PHSEL_SHIFT_MMP3		0
#define USB2_TX_CK60_PHSEL_MASK_MMP3		(0xf << 0)

#define USB2_TX_AMP_SHIFT_MMP3			4
#define USB2_TX_AMP_MASK_MMP3			(0x7 << 4)

#define USB2_TX_VDD12_SHIFT_MMP3		8
#define USB2_TX_VDD12_MASK_MMP3			(0x3 << 8)

/* USB2_TX_REG2 */
#define USB2_TX_DRV_SLEWRATE_SHIFT		10

/* USB2_RX_REG0 */
#define USB2_RX_SQ_THRESH_SHIFT_MMP3		4
#define USB2_RX_SQ_THRESH_MASK_MMP3		(0xf << 4)

#define USB2_RX_SQ_LENGTH_SHIFT_MMP3		10
#define USB2_RX_SQ_LENGTH_MASK_MMP3		(0x3 << 10)

/* USB2_ANA_REG1*/
#define USB2_ANA_PU_ANA_SHIFT_MMP3		14

/* USB2_OTG_REG0 */
#define USB2_OTG_PU_OTG_SHIFT_MMP3		3

/* fsic registers */
#define FSIC_MISC			0x4
#define FSIC_INT			0x28
#define FSIC_CTRL			0x30

/* HSIC registers */
#define HSIC_PAD_CTRL			0x4

#define HSIC_CTRL			0x8
#define HSIC_CTRL_HSIC_ENABLE		(1<<7)
#define HSIC_CTRL_PLL_BYPASS		(1<<4)

#define TEST_GRP_0			0xc
#define TEST_GRP_1			0x10

#define HSIC_INT			0x14
#define HSIC_INT_READY_INT_EN		(1<<10)
#define HSIC_INT_CONNECT_INT_EN		(1<<9)
#define HSIC_INT_CORE_INT_EN		(1<<8)
#define HSIC_INT_HS_READY		(1<<2)
#define HSIC_INT_CONNECT		(1<<1)
#define HSIC_INT_CORE			(1<<0)

#define HSIC_CONFIG			0x18
#define USBHSIC_CTRL			0x20

#define HSIC_USB_CTRL			0x28
#define HSIC_USB_CTRL_CLKEN		1
#define	HSIC_USB_CLK_PHY		0x0
#define HSIC_USB_CLK_PMU		0x1

#endif /* __ASM_ARCH_PXA_U2O_H */