1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 | /* * FIXME correct answer depends on hmc_mode, * as does (on omap1) any nonzero value for config->otg port number */ #if IS_ENABLED([31mCONFIG_USB_OMAP[0m) #define is_usb0_device(config) 1 #else #define is_usb0_device(config) 0 #endif #include <linux/platform_data/usb-omap1.h> void omap_otg_init(struct omap_usb_config *config); #if IS_ENABLED([31mCONFIG_USB[0m) void omap1_usb_init(struct omap_usb_config *pdata); #else static inline void omap1_usb_init(struct omap_usb_config *pdata) { } #endif #define OMAP1_OTG_BASE 0xfffb0400 #define OMAP1_UDC_BASE 0xfffb4000 #define OMAP1_OHCI_BASE 0xfffba000 #define OMAP2_OHCI_BASE 0x4805e000 #define OMAP2_UDC_BASE 0x4805e200 #define OMAP2_OTG_BASE 0x4805e300 #define OTG_BASE OMAP1_OTG_BASE #define UDC_BASE OMAP1_UDC_BASE #define OMAP_OHCI_BASE OMAP1_OHCI_BASE /* * OTG and transceiver registers, for OMAPs starting with ARM926 */ #define OTG_REV (OTG_BASE + 0x00) #define OTG_SYSCON_1 (OTG_BASE + 0x04) # define USB2_TRX_MODE(w) (((w)>>24)&0x07) # define USB1_TRX_MODE(w) (((w)>>20)&0x07) # define USB0_TRX_MODE(w) (((w)>>16)&0x07) # define OTG_IDLE_EN (1 << 15) # define HST_IDLE_EN (1 << 14) # define DEV_IDLE_EN (1 << 13) # define OTG_RESET_DONE (1 << 2) # define OTG_SOFT_RESET (1 << 1) #define OTG_SYSCON_2 (OTG_BASE + 0x08) # define OTG_EN (1 << 31) # define USBX_SYNCHRO (1 << 30) # define OTG_MST16 (1 << 29) # define SRP_GPDATA (1 << 28) # define SRP_GPDVBUS (1 << 27) # define SRP_GPUVBUS(w) (((w)>>24)&0x07) # define A_WAIT_VRISE(w) (((w)>>20)&0x07) # define B_ASE_BRST(w) (((w)>>16)&0x07) # define SRP_DPW (1 << 14) # define SRP_DATA (1 << 13) # define SRP_VBUS (1 << 12) # define OTG_PADEN (1 << 10) # define HMC_PADEN (1 << 9) # define UHOST_EN (1 << 8) # define HMC_TLLSPEED (1 << 7) # define HMC_TLLATTACH (1 << 6) # define OTG_HMC(w) (((w)>>0)&0x3f) #define OTG_CTRL (OTG_BASE + 0x0c) # define OTG_USB2_EN (1 << 29) # define OTG_USB2_DP (1 << 28) # define OTG_USB2_DM (1 << 27) # define OTG_USB1_EN (1 << 26) # define OTG_USB1_DP (1 << 25) # define OTG_USB1_DM (1 << 24) # define OTG_USB0_EN (1 << 23) # define OTG_USB0_DP (1 << 22) # define OTG_USB0_DM (1 << 21) # define OTG_ASESSVLD (1 << 20) # define OTG_BSESSEND (1 << 19) # define OTG_BSESSVLD (1 << 18) # define OTG_VBUSVLD (1 << 17) # define OTG_ID (1 << 16) # define OTG_DRIVER_SEL (1 << 15) # define OTG_A_SETB_HNPEN (1 << 12) # define OTG_A_BUSREQ (1 << 11) # define OTG_B_HNPEN (1 << 9) # define OTG_B_BUSREQ (1 << 8) # define OTG_BUSDROP (1 << 7) # define OTG_PULLDOWN (1 << 5) # define OTG_PULLUP (1 << 4) # define OTG_DRV_VBUS (1 << 3) # define OTG_PD_VBUS (1 << 2) # define OTG_PU_VBUS (1 << 1) # define OTG_PU_ID (1 << 0) #define OTG_IRQ_EN (OTG_BASE + 0x10) /* 16-bit */ # define DRIVER_SWITCH (1 << 15) # define A_VBUS_ERR (1 << 13) # define A_REQ_TMROUT (1 << 12) # define A_SRP_DETECT (1 << 11) # define B_HNP_FAIL (1 << 10) # define B_SRP_TMROUT (1 << 9) # define B_SRP_DONE (1 << 8) # define B_SRP_STARTED (1 << 7) # define OPRT_CHG (1 << 0) #define OTG_IRQ_SRC (OTG_BASE + 0x14) /* 16-bit */ // same bits as in IRQ_EN #define OTG_OUTCTRL (OTG_BASE + 0x18) /* 16-bit */ # define OTGVPD (1 << 14) # define OTGVPU (1 << 13) # define OTGPUID (1 << 12) # define USB2VDR (1 << 10) # define USB2PDEN (1 << 9) # define USB2PUEN (1 << 8) # define USB1VDR (1 << 6) # define USB1PDEN (1 << 5) # define USB1PUEN (1 << 4) # define USB0VDR (1 << 2) # define USB0PDEN (1 << 1) # define USB0PUEN (1 << 0) #define OTG_TEST (OTG_BASE + 0x20) /* 16-bit */ #define OTG_VENDOR_CODE (OTG_BASE + 0xfc) /* 16-bit */ /*-------------------------------------------------------------------------*/ /* OMAP1 */ #define USB_TRANSCEIVER_CTRL (0xfffe1000 + 0x0064) # define CONF_USB2_UNI_R (1 << 8) # define CONF_USB1_UNI_R (1 << 7) # define CONF_USB_PORT0_R(x) (((x)>>4)&0x7) # define CONF_USB0_ISOLATE_R (1 << 3) # define CONF_USB_PWRDN_DM_R (1 << 2) # define CONF_USB_PWRDN_DP_R (1 << 1) |