/* speakup_dtlk.h - header file for speakups DoubleTalk driver. */ #define SYNTH_IO_EXTENT 0x02 #define SYNTH_CLEAR 0x18 /* stops speech */ /* TTS Port Status Flags */ #define TTS_READABLE 0x80 /* mask for bit which is nonzero if a * byte can be read from the TTS port */ #define TTS_SPEAKING 0x40 /* mask for SYNC bit, which is nonzero * while DoubleTalk is producing * output with TTS, PCM or CVSD * synthesizers or tone generators * (that is, all but LPC) */ #define TTS_SPEAKING2 0x20 /* mask for SYNC2 bit, * which falls to zero up to 0.4 sec * before speech stops */ #define TTS_WRITABLE 0x10 /* mask for RDY bit, which when set to * 1, indicates the TTS port is ready * to accept a byte of data. The RDY * bit goes zero 2-3 usec after * writing, and goes 1 again 180-190 * usec later. */ #define TTS_ALMOST_FULL 0x08 /* mask for AF bit: When set to 1, * indicates that less than 300 bytes * are available in the TTS input * buffer. AF is always 0 in the PCM, * TGN and CVSD modes. */ #define TTS_ALMOST_EMPTY 0x04 /* mask for AE bit: When set to 1, * indicates that less than 300 bytes * are remaining in DoubleTalk's input * (TTS or PCM) buffer. AE is always 1 * in the TGN and CVSD modes. */ /* data returned by Interrogate command */ struct synth_settings { u_short serial_number; /* 0-7Fh:0-7Fh */ u_char rom_version[24]; /* null terminated string */ u_char mode; /* 0=Character; 1=Phoneme; 2=Text */ u_char punc_level; /* nB; 0-7 */ u_char formant_freq; /* nF; 0-9 */ u_char pitch; /* nP; 0-99 */ u_char speed; /* nS; 0-9 */ u_char volume; /* nV; 0-9 */ u_char tone; /* nX; 0-2 */ u_char expression; /* nE; 0-9 */ u_char ext_dict_loaded; /* 1=exception dictionary loaded */ u_char ext_dict_status; /* 1=exception dictionary enabled */ u_char free_ram; /* # pages (truncated) remaining for * text buffer */ u_char articulation; /* nA; 0-9 */ u_char reverb; /* nR; 0-9 */ u_char eob; /* 7Fh value indicating end of * parameter block */ u_char has_indexing; /* nonzero if indexing is implemented */ }; |